- 23 6月, 2020 1 次提交
-
-
由 Jiri Olsa 提交于
Adding new test that process metrics code and checks the expected results. Starting with easy ipc metric. Committer testing: # perf test "Parse and process metrics" 67: Parse and process metrics : Ok # # perf test -v "Parse and process metrics" 67: Parse and process metrics : --- start --- test child forked, pid 103402 metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC found event inst_retired.any found event cpu_clk_unhalted.thread adding {inst_retired.any,cpu_clk_unhalted.thread}:W test child finished with 0 ---- end ---- Parse and process metrics: Ok # Had to fix it to initialize that 'struct value' array sentinel with a named initializer to fix the build with some versions of clang: tests/parse-metric.c:135:7: error: missing field 'val' initializer [-Werror,-Wmissing-field-initializers] { 0 }, Signed-off-by: NJiri Olsa <jolsa@kernel.org> Acked-by: NIan Rogers <irogers@google.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200602214741.1218986-13-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 30 5月, 2020 1 次提交
-
-
由 Stephane Eranian 提交于
This patch links perf with the libpfm4 library if it is available and LIBPFM4 is passed to the build. The libpfm4 library contains hardware event tables for all processors supported by perf_events. It is a helper library that helps convert from a symbolic event name to the event encoding required by the underlying kernel interface. This library is open-source and available from: http://perfmon2.sf.net. With this patch, it is possible to specify full hardware events by name. Hardware filters are also supported. Events must be specified via the --pfm-events and not -e option. Both options are active at the same time and it is possible to mix and match: $ perf stat --pfm-events inst_retired:any_p:c=1:i -e cycles .... One needs to explicitely ask for its inclusion by using the LIBPFM4 make command line option, ie its opt-in rather than opt-out of feature detection and build support. Signed-off-by: NStephane Eranian <eranian@google.com> Reviewed-by: NIan Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Igor Lubashev <ilubashe@akamai.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiwei Sun <jiwei.sun@windriver.com> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Cc: yuzhoujian <yuzhoujian@didichuxing.com> Link: http://lore.kernel.org/lkml/20200505182943.218248-2-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 28 5月, 2020 3 次提交
-
-
由 Nick Gasson 提交于
Split from a larger patch that was also fixing a problem with the java demangler, so, before applying that patch we see: $ perf test java 65: Demangle Java : FAILED! $ perf test -v java 65: Demangle Java : --- start --- test child forked, pid 307264 FAILED: Ljava/lang/StringLatin1;equals([B[B)Z: bool class java.lang.StringLatin1.equals(byte[], byte[]) != boolean java.lang.StringLatin1.equals(byte[], byte[]) FAILED: Ljava/util/zip/ZipUtils;CENSIZ([BI)J: long class java.util.zip.ZipUtils.CENSIZ(byte[], int) != long java.util.zip.ZipUtils.CENSIZ(byte[], int) FAILED: Ljava/util/regex/Pattern$BmpCharProperty;match(Ljava/util/regex/Matcher;ILjava/lang/CharSequence;)Z: bool class java.util.regex.Pattern$BmpCharProperty.match(class java.util.regex.Matcher., int, class java.lang., charhar, shortequence) != boolean java.util.regex.Pattern$BmpCharProperty.match(java.util.regex.Matcher, int, java.lang.CharSequence) FAILED: Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V: void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int) != void java.lang.AbstractStringBuilder.appendChars(java.lang.String, int, int) FAILED: Ljava/lang/Object;<init>()V: void class java.lang.Object<init>() != void java.lang.Object<init>() test child finished with -1 ---- end ---- Demangle Java: FAILED! $ Next patch should fix this. Signed-off-by: NNick Gasson <nick.gasson@arm.com> Reviewed-by: NIan Rogers <irogers@google.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Tested-by: NIan Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200427061520.24905-4-nick.gasson@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ian Rogers 提交于
Break pmu-events test into 2 and add a test to verify that all pmu metric expressions simply parse. Try to parse all metric ids/events, skip/warn if metrics for the current architecture fail to parse. To support warning for a skip, and an ability for a subtest to describe why it skips. Tested on power9, skylakex, haswell, broadwell, westmere, sandybridge and ivybridge. May skip/warn on other architectures if metrics are invalid. In particular s390 is untested, but its expressions are trivial. The untested architectures with expressions are power8, cascadelakex, tremontx, skylake, jaketown, ivytown and variants of haswell and broadwell. v3. addresses review comments from John Garry <john.garry@huawei.com>, Jiri Olsa <jolsa@redhat.com> and Arnaldo Carvalho de Melo <acme@kernel.org>. v2. changes the commit message as event parsing errors no longer cause the test to fail. Committer notes: Check the return value of strtod() to fix the build in systems where that function is declared with attribute warn_unused_result. Signed-off-by: NIan Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200513212933.41273-1-irogers@google.com [ split from a larger patch ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ian Rogers 提交于
Now subtests can inform why a test was skipped. The upcoming patch improvint PMU event metric testing will use it. Signed-off-by: NIan Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200513212933.41273-1-irogers@google.com [ split from a larger patch ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 30 4月, 2020 1 次提交
-
-
由 Ian Rogers 提交于
The synthesize benchmark shows the majority of execution time going to fgets and sscanf, necessary to parse /proc/pid/maps. Add a new buffered reading library that will be used to replace these calls in a follow-up CL. Add tests for the library to perf test. Committer tests: $ perf test api 63: Test api io : Ok $ Signed-off-by: NIan Rogers <irogers@google.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Acked-by: NNamhyung Kim <namhyung@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrey Zhizhikin <andrey.z@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20200415054050.31645-3-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 24 3月, 2020 1 次提交
-
-
由 John Garry 提交于
The initial test will verify that the test tables in generated pmu-events.c match against known, expected values. For known events added in pmu-events/arch/test, we need to add an entry in test_cpu_aliases_events[] or test_uncore_events[]. A sample run is as follows for x86: john@linux-3c19:~/linux> tools/perf/perf test -vv 10 10: PMU event aliases : --- start --- test child forked, pid 5316 testing event table bp_l1_btb_correct: pass testing event table bp_l2_btb_correct: pass testing event table segment_reg_loads.any: pass testing event table dispatch_blocked.any: pass testing event table eist_trans: pass testing event table uncore_hisi_ddrc.flux_wcmd: pass testing event table unc_cbo_xsnp_response.miss_eviction: pass test child finished with 0 ---- end ---- PMU event aliases: Ok Signed-off-by: NJohn Garry <john.garry@huawei.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: James Clark <james.clark@arm.com> Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linuxarm@huawei.com [ Fixup test_cpu_events[] and test_uncore_events[] sentinels to initialize one of its members to NULL, fixing the build in older compilers ] Link: http://lore.kernel.org/lkml/1584442939-8911-5-git-send-email-john.garry@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 29 11月, 2019 2 次提交
-
-
由 Ian Rogers 提交于
Adds a test for minimal jit_write_elf functionality. Committer testing: # perf test jit 61: Test jit_write_elf : Ok # # perf test -v jit 61: Test jit_write_elf : --- start --- test child forked, pid 10460 Writing jit code to: /tmp/perf-test-KqxURR test child finished with 0 ---- end ---- Test jit_write_elf: Ok # Committer notes: Fix up the case where HAVE_JITDUMP is no defined. Signed-off-by: NIan Rogers <irogers@google.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Allison Randal <allison@lohutok.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20191126235913.41855-1-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Andi Kleen 提交于
Maintain a cpumap in the evlist that is the union of all the cpus of the events. This needs a cpumap merge operation, which is added together with tests. v2: Add tests for cpu map merge Fix handling of duplicates Rename _update to _merge Factor out sorting. Fix handling of NULL maps in merge v3: Add comments and empty lines to _merge Committer testing: # perf test "Merge cpu map" 52: Merge cpu map : Ok # Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Link: http://lore.kernel.org/lkml/20191121001522.180827-5-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 26 11月, 2019 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
One more step in mergint the maps and map_groups structs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-bw6aagubqxc47m54k2maezfu@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
One more step in merging 'struct maps' with 'struct map_groups'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-naxsl3g4ou3fyxb8l8e0pn5e@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 20 10月, 2019 1 次提交
-
-
由 Leo Yan 提交于
The arm architecture supports breakpoint accounting but it doesn't support breakpoint overflow signal handling. The current code uses the same checking helper, thus it disables both testings (bp_account and bp_signal) for arm platform. For handling two testings separately, this patch adds a dedicated checking helper is_supported() for breakpoint accounting testing, thus it allows supporting breakpoint accounting testing on arm platform; the old helper test__bp_signal_is_supported() is only used to checking for breakpoint overflow signal testing. Signed-off-by: NLeo Yan <leo.yan@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Brajeswar Ghosh <brajeswar.linux@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/20191018085531.6348-2-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 11 6月, 2019 1 次提交
-
-
由 Adrian Hunter 提交于
Test time ranges work as expected. Committer testing: $ perf test "time utils" 59: time utils : Ok $ perf test -v "time utils" 59: time utils : --- start --- test child forked, pid 31711 parse_nsec_time("0") 0 parse_nsec_time("1") 1000000000 parse_nsec_time("0.000000001") 1 parse_nsec_time("1.000000001") 1000000001 parse_nsec_time("123456.123456") 123456123456000 parse_nsec_time("1234567.123456789") 1234567123456789 parse_nsec_time("18446744073.709551615") 18446744073709551615 perf_time__parse_str("1234567.123456789,1234567.123456789") start time 1234567123456789, end time 1234567123456789 perf_time__parse_str("1234567.123456789,1234567.123456790") start time 1234567123456789, end time 1234567123456790 perf_time__parse_str("1234567.123456789,") start time 1234567123456789, end time 0 perf_time__parse_str(",1234567.123456789") start time 0, end time 1234567123456789 perf_time__parse_str("0,1234567.123456789") start time 0, end time 1234567123456789 perf_time__parse_for_ranges("1234567.123456789,1234567.123456790") start time 1234567123456789, end time 1234567123456790 perf_time__parse_for_ranges("10%/1") first_sample_time 7654321000000000 last_sample_time 7654321000000100 start time 0: 7654321000000000, end time 0: 7654321000000009 perf_time__parse_for_ranges("10%/2") first_sample_time 7654321000000000 last_sample_time 7654321000000100 start time 0: 7654321000000010, end time 0: 7654321000000019 perf_time__parse_for_ranges("10%/1,10%/2") first_sample_time 11223344000000000 last_sample_time 11223344000000100 start time 0: 11223344000000000, end time 0: 11223344000000009 start time 1: 11223344000000010, end time 1: 11223344000000019 perf_time__parse_for_ranges("10%/1,10%/3,10%/10") first_sample_time 11223344000000000 last_sample_time 11223344000000100 start time 0: 11223344000000000, end time 0: 11223344000000009 start time 1: 11223344000000020, end time 1: 11223344000000029 start time 2: 11223344000000090, end time 2: 11223344000000100 test child finished with 0 ---- end ---- time utils: Ok $ Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20190604130017.31207-19-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 29 5月, 2019 1 次提交
-
-
由 Jiri Olsa 提交于
Add map_groups__merge_in test to test the map_groups__merge_in function usage - merging kcore maps into existing eBPF maps. Committer testing: # perf test merge 59: map_groups__merge_in : Ok # perf test -v merge 59: map_groups__merge_in : --- start --- test child forked, pid 8349 test child finished with 0 ---- end ---- map_groups__merge_in: Ok # Signed-off-by: NJiri Olsa <jolsa@kernel.org> Acked-by: NSong Liu <songliubraving@fb.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190508132010.14512-10-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 09 1月, 2019 1 次提交
-
-
由 Florian Fainelli 提交于
perf on ARM requires CONFIG_KUSER_HELPERS to be turned on to allow some independance with respect to the ARM CPU being used. Add a test which tries to locate the [vectors] page, created when CONFIG_KUSER_HELPERS is turned on to help asses the system's health. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lkml.kernel.org/r/20181221034337.26663-3-f.fainelli@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 09 10月, 2018 1 次提交
-
-
由 Thomas Richter 提交于
S390 does not support the perf_event_open system call for attribute type PERF_TYPE_BREAKPOINT. This results in test failure for test 22: [root@s8360046 perf]# ./perf test 22 22: Watchpoint : 22.1: Read Only Watchpoint : FAILED! 22.2: Write Only Watchpoint : FAILED! 22.3: Read / Write Watchpoint : FAILED! 22.4: Modify Watchpoint : FAILED! [root@s8360046 perf]# Add s390 support to avoid these tests being executed on s390 platform: [root@s8360046 perf]# ./perf test 22 [root@s8360046 perf]# ./perf test -v 22 22: Watchpoint : Disabled [root@s8360046 perf]# Signed-off-by: NThomas Richter <tmricht@linux.ibm.com> Reviewed-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180928105335.67179-1-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 19 9月, 2018 1 次提交
-
-
由 Ravi Bangoria 提交于
We don't have a 'perf test' entry available to test the watchpoint functionality. Add a simple set of tests: - Read only watchpoint - Write only watchpoint - Read / Write watchpoint - Runtime watchpoint modification Ex.: on powerpc: $ sudo perf test 22 22: Watchpoint : 22.1: Read Only Watchpoint : Ok 22.2: Write Only Watchpoint : Ok 22.3: Read / Write Watchpoint : Ok 22.4: Modify Watchpoint : Ok Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lkml.kernel.org/r/20180912061229.22832-1-ravi.bangoria@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 17 3月, 2018 1 次提交
-
-
由 Jiri Olsa 提交于
Adding mem2node object automated test. The test prepares few artificial nodes - memory maps and verifies the mem2node object returns proper node values to given addresses. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180309101442.9224-4-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 13 3月, 2018 1 次提交
-
-
由 Jiri Olsa 提交于
Adding test that: - detects the number of watch/break-points, skip test if any is missing - detects PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl, skip test if it's missing - detects if watchpoints and breakpoints share same slots - create all possible watchpoints on cpu 0 - change one of it to breakpoint - in case wp and bp do not share slots, we create another watchpoint to ensure the slot accounting is correct Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Milind Chabbi <chabbi.milind@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <onestero@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180312134548.31532-9-jolsa@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 02 11月, 2017 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org> Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 8月, 2017 1 次提交
-
-
由 Andi Kleen 提交于
Add some simple tests to perf test to test data source printing. v2: Make the tests actually checked for the correct name of Forward v3: Adjust to new encoding Committer notes: Avoid the in place declaration to make this build with older compilers, for instance, in Debian 7 we get: tests/mem.c: In function 'test__mem': tests/mem.c:30:5: error: missing initializer [-Werror=missing-field-initializers] tests/mem.c:30:5: error: (near initialization for '(anonymous).<anonymous>.mem_snoop') [-Werror=missing-field-initializers] So just zero a struct, then go on building the unions as needed, reusing settings from the previous test, i.e. local -> remote, etc. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170816222156.19953-5-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 12 8月, 2017 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
To allow testing by directly using perf tools in scripts, checking that the effects on the system are the ones expected and that the output produced is as well the desired one. For instance, adding a probe at a well known location with 'perf probe', then checking that the results from using that probe to record are the desired ones, etc. The next csets will introduce tests using this new testing infrastructure. The scripts should return 0 for Ok, 1 for FAIL and 2 for SKIP. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-swbpn7amrjqffh83lsr39s9p@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 11 8月, 2017 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
This way we'll be able to pass more test specific parameters without having to change this function signature. Will be used by the upcoming 'shell tests', shell scripts that will call perf tools and check if they work as expected, comparing its effects on the system (think 'perf probe foo') the output produced, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wq250w7j1opbzyiynozuajbl@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 06 6月, 2017 1 次提交
-
-
由 Jiri Olsa 提交于
The following tests are failing on powerpc: # perf test break 18: Breakpoint overflow signal handler : FAILED! 19: Breakpoint overflow sampling : FAILED! The powerpc kenel so far does not have support to even create instruction breakpoints using the perf event interface, so those tests fail early in the config phase. I added a '->is_supported()' callback to test struct to be able to disable specific tests. It seems better than putting ifdefs directly to the test array. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20170601205450.GA398@kravaSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 23 3月, 2017 1 次提交
-
-
由 Andi Kleen 提交于
Add a simple expression parser good enough to parse JSON relation expressions. The parser is implemented using bison. This is just intended as an simple parser for internal usage in the event lists, not the beginning of a "perf scripting language" v2: Use expr__ prefix instead of expr_ Support multiple free variables for parser Committer note: The v2 patch had: %define api.pure full In expr.y, that is a feature introduced in bison 2.7, to have reentrant parsers, not using global variables, which would make tools/perf stop building with the bison version shipped in older distros, so Andi realised that the other parsers (e.g. parse-events.y) were using: %pure-parser Which is present in older versions of bison and fits the bill. I added: CFLAGS_expr-bison.o += -DYYENABLE_NLS=0 -DYYLTYPE_IS_TRIVIAL=0 -w To finally make it build, copying what was there for pmu-bison.o, another parser. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-8-andi@firstfloor.org [ stdlib.h is needed in tests/expr.c for free() fixing build in systems such as ubuntu:16.04-x-s390 ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 12 1月, 2017 1 次提交
-
-
由 Jiri Olsa 提交于
Add unit_number__scnprintf function to display size units and use it in -m option info message. Before: $ perf record -m 10M ls rounding mmap pages size to 16777216 bytes (4096 pages) ... After: $ perf record -m 10M ls rounding mmap pages size to 16M (4096 pages) ... Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1483955520-29063-2-git-send-email-jolsa@kernel.org [ Rename it to unit_number__scnprintf for consistency ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 16 12月, 2016 1 次提交
-
-
由 Jiri Olsa 提交于
Add thread_map__remove function to remove thread from thread map. Add automated test also. Committer notes: Testing it: # perf test "Remove thread map" 39: Remove thread map : Ok # perf test -v "Remove thread map" 39: Remove thread map : --- start --- test child forked, pid 4483 2 threads: 4482, 4483 1 thread: 4483 0 thread: test child finished with 0 ---- end ---- Remove thread map: Ok # Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481538943-21874-4-git-send-email-jolsa@kernel.org [ Added stdlib.h, to get the free() declaration ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 06 12月, 2016 1 次提交
-
-
由 Wang Nan 提交于
Add basic clang support in clang.cpp and test__clang() testcase. The first testcase checks if builtin clang is able to generate LLVM IR. tests/clang.c is a proxy. Real testcase resides in utils/c++/clang-test.cpp in c++ and exports C interface to perf test subsystem. Test result: $ perf test -v clang 51: builtin clang support : 51.1: Test builtin clang compile C source to IR : --- start --- test child forked, pid 13215 test child finished with 0 ---- end ---- Test builtin clang support subtest 0: Ok Committer note: Make sure you've enabled CLANG and LLVM builtin support by setting the LIBCLANGLLVM variable on the make command line, e.g.: make LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin Otherwise you'll get this when trying to do the 'perf test' call above: # perf test clang 51: builtin clang support : Skip (not compiled in) # Signed-off-by: NWang Nan <wangnan0@huawei.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-11-wangnan0@huawei.com [ Removed "Test" from descriptions, redundant and already removed from all the other entries ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 29 11月, 2016 1 次提交
-
-
由 Wang Nan 提交于
Perf hooks allow hooking user code at perf events. They can be used for manipulation of BPF maps, taking snapshot and reporting results. In this patch two perf hook points are introduced: record_start and record_end. To avoid buggy user actions, a SIGSEGV signal handler is introduced into 'perf record'. It turns off perf hook if it causes a segfault and report an error to help debugging. A test case for perf hook is introduced. Test result: $ ./buildperf/perf test -v hook 50: Test perf hooks : --- start --- test child forked, pid 10311 SIGSEGV is observed as expected, try to recover. Fatal error (SEGFAULT) in perf hook 'test' test child finished with 0 ---- end ---- Test perf hooks: Ok Signed-off-by: NWang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-5-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 03 8月, 2016 1 次提交
-
-
由 Jiri Olsa 提交于
Automatically test the bitmap_scnprintf function. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470074555-24889-5-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 19 7月, 2016 1 次提交
-
-
由 Jiri Olsa 提交于
Add automated test for is_printable_array function. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1468685480-18951-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 14 7月, 2016 1 次提交
-
-
由 Masami Hiramatsu 提交于
Add a basic test case for SDT event support. This test scans an SDT event in perftools and check whether the SDT event is correctly stored into the buildid cache. Here is an example: ---- $ perf test sdt -v 47: Test SDT event probing : --- start --- test child forked, pid 20732 Found 72 SDTs in /home/mhiramat/ksrc/linux/tools/perf/perf Writing cache: %sdt_perf:test_target=test_target Cache committed: 0 symbol:test_target file:(null) line:0 offset:0 return:0 lazy:(null) test child finished with 0 ---- end ---- Test SDT event probing: Ok ---- Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146831796546.17065.1502584370844087537.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 7月, 2016 1 次提交
-
-
由 Jiri Olsa 提交于
Display cpu map in standard list form. (perf report -D output on perf stat data). before: 0x590 [0x18]: PERF_RECORD_CPU_MAP nr: 4 cpus: 0, 1, 2, 3 after: 0x590 [0x18]: PERF_RECORD_CPU_MAP: 0-3 Adding automated testcase. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467113345-12669-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 10 5月, 2016 1 次提交
-
-
由 Wang Nan 提交于
This test checks reading from backward ring buffer. Test result: # ~/perf test 'ring buffer' 45: Test backward reading from ring buffer : Ok The test case is a while loop which calls prctl(PR_SET_NAME) multiple times. Each prctl should issue 2 events: one PERF_RECORD_SAMPLE, one PERF_RECORD_COMM. The first round creates a relative large ring buffer (256 pages). It can afford all events. Read from it and check the count of each type of events. The second round creates a small ring buffer (1 page) and makes it overwritable. Check the correctness of the buffer. Signed-off-by: NWang Nan <wangnan0@huawei.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1462758471-89706-3-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 30 3月, 2016 1 次提交
-
-
由 Jiri Olsa 提交于
This test creates software event 'cpu-clock' attaches it in several ways and checks that enabled and running times match. Committer notes: Testing it: [acme@jouet linux]$ perf test -v times 44: Test events times : --- start --- test child forked, pid 27170 attaching to spawned child, enable on exec OK : ena 307328, run 307328 attaching to current thread as enabled OK : ena 7826, run 7826 attaching to current thread as disabled OK : ena 738, run 738 attaching to CPU 0 as enabled SKIP : not enough rights attaching to CPU 0 as enabled SKIP : not enough rights test child finished with -2 ---- end ---- Test events times: Skip [acme@jouet linux]$ [root@jouet ~]# perf test times 44: Test events times : Ok [root@jouet ~]# perf test -v times 44: Test events times : --- start --- test child forked, pid 27306 attaching to spawned child, enable on exec OK : ena 479290, run 479290 attaching to current thread as enabled OK : ena 11356, run 11356 attaching to current thread as disabled OK : ena 987, run 987 attaching to CPU 0 as enabled OK : ena 3717, run 3717 attaching to CPU 0 as enabled OK : ena 2323, run 2323 test child finished with 0 ---- end ---- Test events times: Ok [root@jouet ~]# Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1458823940-24583-7-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 18 12月, 2015 5 次提交
-
-
由 Jiri Olsa 提交于
Adding unit type 'event update' event, that stores/transfer events unit name. The unit name is part of the perf stat output data. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NKan Liang <kan.liang@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1445784728-21732-22-git-send-email-jolsa@kernel.org [ Rename __alloc() to __new() for consistency ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Introduce the perf_event__synthesize_stat_round function to synthesize a 'struct stat_round_event'. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NKan Liang <kan.liang@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1445784728-21732-19-git-send-email-jolsa@kernel.org [ Renamed 'time' parameter to 'evtime' to fix build on older systems ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Introduce the perf_event__synthesize_stat function to synthesize a 'struct stat_event'. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NKan Liang <kan.liang@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1445784728-21732-16-git-send-email-jolsa@kernel.org [ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Introduce the perf_event__synthesize_stat_config to synthesize a 'struct perf_stat_config'. Storing the stat config in the form of tag-value pairs will, I believe, sort out future version extensibility issues. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NKan Liang <kan.liang@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1445784728-21732-13-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Introduce the perf_event__synthesize_cpu_map function to synthesize a struct cpu_map. Added generic interface: cpu_map_data__alloc cpu_map_data__synthesize to make the cpu_map synthesizing usable for other events. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NKan Liang <kan.liang@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1445784728-21732-9-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-