- 14 1月, 2011 3 次提交
-
-
由 Andrea Arcangeli 提交于
Used by paravirt and not paravirt set_pmd_at. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NRik van Riel <riel@redhat.com> Acked-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lasse Collin 提交于
This integrates the XZ decompression code to the x86 pre-boot code. mkpiggy.c is updated to reserve about 32 KiB more buffer safety margin for kernel decompression. It is done unconditionally for all decompressors to keep the code simpler. The XZ decompressor needs around 30 KiB of heap, so the heap size is increased to 32 KiB on both x86-32 and x86-64. Documentation/x86/boot.txt is updated to list the XZ magic number. With the x86 BCJ filter in XZ, XZ-compressed x86 kernel tends to be a few percent smaller than the equivalent LZMA-compressed kernel. Signed-off-by: NLasse Collin <lasse.collin@tukaani.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alain Knaff <alain@knaff.lu> Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
Drop the old geode_gpio crud, as well as the raw outl() calls; instead, use the Linux GPIO API where possible, and the cs5535_gpio API in other places. Note that we don't actually clean up the driver properly yet (once loaded, it always remains loaded). That'll come later.. This patch is necessary for building the driver. Signed-off-by: NAndres Salomon <dilinger@queued.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 1月, 2011 37 次提交
-
-
由 Xiao Guangrong 提交于
It only allows to audit one guest in the system since: - 'audit_point' is a glob variable - mmu_audit_disable() is called in kvm_mmu_destroy(), so audit is disabled after a guest exited this patch fix those issues then allow to audit more guests at the same time Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Instead of syncing the guest cr3 every exit, which is expensince on vmx with ept enabled, sync it only on demand. [sheng: fix incorrect cr3 seen by Windows XP] Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Andre Przywara 提交于
In case of a nested page fault or an intercepted #PF newer SVM implementations provide a copy of the faulting instruction bytes in the VMCB. Use these bytes to feed the instruction emulator and avoid the costly guest instruction fetch in this case. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Andre Przywara 提交于
Newer SVM implementations provide the GPR number in the VMCB, so that the emulation path is no longer necesarry to handle CR register access intercepts. Implement the handling in svm.c and use it when the info is provided. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Andre Przywara 提交于
emulate_instruction had many callers, but only one used all parameters. One parameter was unused, another one is now hidden by a wrapper function (required for a future addition anyway), so most callers use now a shorter parameter list. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Andre Przywara 提交于
move the complete_insn_gp() helper function out of the VMX part into the generic x86 part to make it usable by SVM. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Andre Przywara 提交于
The handling of CR8 writes in KVM is currently somewhat cumbersome. This patch makes it look like the other CR register handlers and fixes a possible issue in VMX, where the RIP would be incremented despite an injected #GP. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Joerg Roedel 提交于
This patch implements the xsetbv intercept to the AMD part of KVM. This makes AVX usable in a save way for the guest on AVX capable AMD hardware. The patch is tested by using AVX in the guest and host in parallel and checking for data corruption. I also used the KVM xsave unit-tests and they all pass. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Anthony Liguori 提交于
In certain use-cases, we want to allocate guests fixed time slices where idle guest cycles leave the machine idling. There are many approaches to achieve this but the most direct is to simply avoid trapping the HLT instruction which lets the guest directly execute the instruction putting the processor to sleep. Introduce this as a module-level option for kvm-vmx.ko since if you do this for one guest, you probably want to do it for all. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds the new flush-by-asid of upcoming AMD processors to the KVM-AMD module. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Retry #PF for softmmu only when the current vcpu has the same cr3 as the time when #PF occurs Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
It's the speculative path if 'no_apf = 1' and we will specially handle this speculative path in the later patch, so 'prefault' is better to fit the sense. Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Roedel, Joerg 提交于
This patch adds the infrastructure for the implementation of the individual clean-bits. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Since vmx blocks INIT signals, we disable virtualization extensions during reboot. This leads to virtualization instructions faulting; we trap these faults and spin while the reboot continues. Unfortunately spinning on a non-preemptible kernel may block a task that reboot depends on; this causes the reboot to hang. Fix by skipping over the instruction and hoping for the best. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch wraps changes to the DRx intercepts of SVM into seperate functions to abstract nested-svm better and prepare the implementation of the vmcb-clean-bits feature. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Roedel, Joerg 提交于
This patch wraps changes to the CRx intercepts of SVM into seperate functions to abstract nested-svm better and prepare the implementation of the vmcb-clean-bits feature. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces a generic representation of guest-mode fpr a vcpu. This currently only exists in the SVM code. Having this representation generic will help making the non-svm code aware of nesting when this is necessary. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Currently page fault cr2 and nesting infomation are carried outside the fault data structure. Instead they are placed in the vcpu struct, which results in confusion as global variables are manipulated instead of passing parameters. Fix this issue by adding address and nested fields to struct x86_exception, so this struct can carry all information associated with a fault. Signed-off-by: NAvi Kivity <avi@redhat.com> Tested-by: NJoerg Roedel <joerg.roedel@amd.com> Tested-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
This way, they can return #GP, not just #PF. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Introduce a structure that can contain an exception to be passed back to main kvm code. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
Remove it since we can judge it by using sp->unsync Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
The exit reason alone is insufficient to understand exactly why an exit occured; add ISA-specific trace parameters for additional information. Because fetching these parameters is expensive on vmx, and because these parameters are fetched even if tracing is disabled, we fetch the parameters via a callback instead of as traditional trace arguments. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Currently the x86 emulator converts the segment register associated with an operand into a segment base which is added into the operand address. This loss of information results in us not doing segment limit checks properly. Replace struct operand's addr.mem field by a segmented_address structure which holds both the effetive address and segment. This will allow us to do the limit check at the point of access. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
If apf is generated in L2 guest and is completed in L1 guest, it will prefault this apf in L1 guest's mmu context. Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Remove the declaration of kvm_mmu_set_base_ptes() Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Currently the exit is unhandled, so guest halts with error if it tries to execute INVD instruction. Call into emulator when INVD instruction is executed by a guest instead. This instruction is not needed by ordinary guests, but firmware (like OpenBIOS) use it and fail. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
May otherwise generates build warnings about unused kvm_read_and_reset_pf_reason if included without CONFIG_KVM_GUEST enabled. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
If guest can detect that it runs in non-preemptable context it can handle async PFs at any time, so let host know that it can send async PF even if guest cpu is not in userspace. Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
Send async page fault to a PV guest if it accesses swapped out memory. Guest will choose another task to run upon receiving the fault. Allow async page fault injection only when guest is in user mode since otherwise guest may be in non-sleepable context and will not be able to reschedule. Vcpu will be halted if guest will fault on the same page again or if vcpu executes kernel code. Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
When async PF capability is detected hook up special page fault handler that will handle async page fault events and bypass other page faults to regular page fault handler. Also add async PF handling to nested SVM emulation. Async PF always generates exit to L1 where vcpu thread will be scheduled out until page is available. Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
Enable async PF in a guest if async PF capability is discovered. Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
Guest enables async PF vcpu functionality using this MSR. Reviewed-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
Async PF also needs to hook into smp_prepare_boot_cpu so move the hook into generic code. Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
When page is swapped in it is mapped into guest memory only after guest tries to access it again and generate another fault. To save this fault we can map it immediately since we know that guest is going to access the page. Do it only when tdp is enabled for now. Shadow paging case is more complicated. CR[034] and EFER registers should be switched before doing mapping and then switched back. Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
If a guest accesses swapped out memory do not swap it in from vcpu thread context. Schedule work to do swapping and put vcpu into halted state instead. Interrupts will still be delivered to the guest and if interrupt will cause reschedule guest will continue to run another task. [avi: remove call to get_user_pages_noio(), nacked by Linus; this makes everything synchrnous again] Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-