Pass the memslot to the rmap callbacks, it will be used when zapping
collapsible SPTEs to verify the memslot is compatible with hugepages
before zapping its SPTEs.

No functional change intended.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-5-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Factor out the logic for determining the maximum mapping level given a
memslot and a gpa.  The helper will be used when zapping collapsible
SPTEs when disabling dirty logging, e.g. to avoid zapping SPTEs that
can't possibly be rebuilt as hugepages.

No functional change intended.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-4-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Zap SPTEs that are backed by ZONE_DEVICE pages when zappings SPTEs to
rebuild them as huge pages in the TDP MMU.  ZONE_DEVICE huge pages are
managed differently than "regular" pages and are not compound pages.
Likewise, PageTransCompoundMap() will not detect HugeTLB, so switch
to PageCompound().

This matches the similar check in kvm_mmu_zap_collapsible_spte.

Cc: Ben Gardon <bgardon@google.com>
Fixes: 14881998 ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU")
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-2-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is not needed because the tweak was done on the guest_mmu, while
nested_ept_uninit_mmu_context has just changed vcpu->arch.walk_mmu
back to the root_mmu.
Suggested-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In case of npt=0 on host, nSVM needs the same .inject_page_fault tweak
as VMX has, to make sure that shadow mmu faults are injected as vmexits.

It is not clear why this is needed at all, but for now keep the same
code as VMX and we'll fix it for both.

Based on a patch by Maxim Levitsky <mlevitsk@redhat.com>.

Fixes: 7c86663b ("KVM: nSVM: inject exceptions via svm_check_nested_events")
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This way trace will capture all the nested mode entries
(including entries after migration, and from smm)
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210217145718.1217358-3-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

trace_kvm_exit prints this value (using vmx_get_exit_info)
so it makes sense to read it before the trace point.

Fixes: dcf068da ("KVM: VMX: Introduce generic fastpath handler")
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210217145718.1217358-2-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Remove the restriction that prevents VMX from exposing INVPCID to the
guest without PCID also being exposed to the guest.  The justification of
the restriction is that INVPCID will #UD if it's disabled in the VMCS.
While that is a true statement, it's also true that RDTSCP will #UD if
it's disabled in the VMCS.  Neither of those things has any dependency
whatsoever on the guest being able to set CR4.PCIDE=1, which is what is
effectively allowed by exposing PCID to the guest.

Removing the bogus restriction aligns VMX with SVM, and also allows for
an interesting configuration.  INVPCID is that fastest way to do a global
TLB flush, e.g. see native_flush_tlb_global().  Allowing INVPCID without
PCID would let a guest use the expedited flush while also limiting the
number of ASIDs consumed by the guest.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210212003411.1102677-4-seanjc@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Advertise INVPCID by default (if supported by the host kernel) instead
of having both SVM and VMX opt in.  INVPCID was opt in when it was a
VMX only feature so that KVM wouldn't prematurely advertise support
if/when it showed up in the kernel on AMD hardware.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210212003411.1102677-3-seanjc@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Intercept INVPCID if it's disabled in the guest, even when using NPT,
as KVM needs to inject #UD in this case.

Fixes: 4407a797 ("KVM: SVM: Enable INVPCID feature on AMD")
Cc: Babu Moger <babu.moger@amd.com>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210212003411.1102677-2-seanjc@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The variable in practice will never be uninitialized, because the
loop will always go through at least one iteration.

In case it would not, make vcpu_get_cpuid report an assertion
failure.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This test launches 512 VMs in serial and kills them after a random
amount of time.

The test was original written to exercise KVM user notifiers in
the context of1650b4ebc99d:
- KVM: Disable irq while unregistering user notifier
- https://lore.kernel.org/kvm/CACXrx53vkO=HKfwWwk+fVpvxcNjPrYmtDZ10qWxFvVX_PTGp3g@mail.gmail.com/

Recently, this test piqued my interest because it proved useful to
for AMD SNP in exercising the "in-use" pages, described in APM section
15.36.12, "Running SNP-Active Virtual Machines".
Signed-off-by: NIgnacio Alvarado <ikalvarado@google.com>
Signed-off-by: NMarc Orr <marcorr@google.com>
Message-Id: <20210213001452.1719001-1-marcorr@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM/arm64 updates for Linux 5.12

- Make the nVHE EL2 object relocatable, resulting in much more
  maintainable code
- Handle concurrent translation faults hitting the same page
  in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling

Signed-off-by: NMarc Zyngier <maz@kernel.org>

Signed-off-by: NMarc Zyngier <maz@kernel.org>

Signed-off-by: NMarc Zyngier <maz@kernel.org>

Signed-off-by: NMarc Zyngier <maz@kernel.org>

Signed-off-by: NMarc Zyngier <maz@kernel.org>

KVM/arm64 fixes for 5.11, take #2

- Don't allow tagged pointers to point to memslots
- Filter out ARMv8.1+ PMU events on v8.0 hardware
- Hide PMU registers from userspace when no PMU is configured
- More PMU cleanups
- Don't try to handle broken PSCI firmware
- More sys_reg() to reg_to_encoding() conversions
Signed-off-by: NMarc Zyngier <maz@kernel.org>

Add a 2 byte pad to struct compat_vcpu_info so that the sum size of its
fields is actually 64 bytes.  The effective size without the padding is
also 64 bytes due to the compiler aligning evtchn_pending_sel to a 4-byte
boundary, but depending on compiler alignment is subtle and unnecessary.

Opportunistically replace spaces with tables in the other fields.

Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-6-seanjc@google.com>
Reviewed-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Don't bother mapping the Xen shinfo pages into the guest, they don't need
to be accessed using the GVAs and passing a define with "GPA" in the name
to addr_gva2hpa() is confusing.

Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-5-seanjc@google.com>
Reviewed-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The Xen shinfo selftest uses '40' when setting the GPA of the vCPU info
struct, but checks for the result at '0x40'.  Arbitrarily use the hex
version to resolve the bug.

Fixes: 8d4e7e80 ("KVM: x86: declare Xen HVM shared info capability and add test case")
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-4-seanjc@google.com>
Reviewed-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For better or worse, the memslot APIs take the number of pages, not the
size in bytes.  The Xen tests need 2 pages, not 8192 pages.

Fixes: 8d4e7e80 ("KVM: x86: declare Xen HVM shared info capability and add test case")
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-3-seanjc@google.com>
Reviewed-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add the new Xen test binaries to KVM selftest's .gitnore.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-2-seanjc@google.com>
Reviewed-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fixes: 678e90a3 ("KVM: selftests: Test IPI to halted vCPU in xAPIC while backing page moves")
Cc: Andrew Jones <drjones@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: NPeter Shier <pshier@google.com>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210210011747.240913-1-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Building the KVM selftests with LLVM's integrated assembler fails with:

  $ CFLAGS=-fintegrated-as make -C tools/testing/selftests/kvm CC=clang
  lib/x86_64/svm.c:77:16: error: too few operands for instruction
          asm volatile ("vmsave\n\t" : : "a" (vmcb_gpa) : "memory");
                        ^
  <inline asm>:1:2: note: instantiated into assembly here
          vmsave
          ^
  lib/x86_64/svm.c:134:3: error: too few operands for instruction
                  "vmload\n\t"
                  ^
  <inline asm>:1:2: note: instantiated into assembly here
          vmload
          ^
This is because LLVM IAS does not currently support calling vmsave,
vmload, or vmload without an explicit %rax operand.

Add an explicit operand to vmsave, vmload, and vmrum in svm.c. Fixing
this was suggested by Sean Christopherson.

Tested: building without this error in clang 11. The following patch
(not queued yet) needs to be applied to solve the other remaining error:
"selftests: kvm: remove reassignment of non-absolute variables".
Suggested-by: NSean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/X+Df2oQczVBmwEzi@google.com/Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NRicardo Koller <ricarkol@google.com>
Message-Id: <20210210031719.769837-1-ricarkol@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The sparse tool complains as follows:

arch/x86/kvm/svm/svm.c:204:6: warning:
 symbol 'svm_gp_erratum_intercept' was not declared. Should it be static?

This symbol is not used outside of svm.c, so this
commit marks it static.

Fixes: 82a11e9c ("KVM: SVM: Add emulation support for #GP triggered by SVM instructions")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20210210075958.1096317-1-weiyongjun1@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-ppc-next-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD

PPC KVM update for 5.12

- Support for second data watchpoint on POWER10, from Ravi Bangoria
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes from Nick Piggin and Fabiano Rosas

include/asm-generic/qrwlock.h was trying to get arch_spin_is_locked via
asm-generic/qspinlock.h.  However, this does not work because architectures
might be using queued rwlocks but not queued spinlocks (csky), or because they
might be defining their own queued_* macros before including asm/qspinlock.h.

To fix this, ensure that asm/spinlock.h always includes qrwlock.h after
defining arch_spin_is_locked (either directly for csky, or via
asm/qspinlock.h for other architectures).  The only inclusion elsewhere
is in kernel/locking/qrwlock.c.  That one is really unnecessary because
the file is only compiled in SMP configurations (config QUEUED_RWLOCKS
depends on SMP) and in that case linux/spinlock.h already includes
asm/qrwlock.h if needed, via asm/spinlock.h.
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWaiman Long <longman@redhat.com>
Fixes: 26128cb6 ("locking/rwlocks: Add contention detection for rwlocks")
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NBen Gardon <bgardon@google.com>
[Add arch/sparc and kernel/locking parts per discussion with Waiman. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 68ad28a4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side
channel") incorrectly removed the radix host instruction patch to skip
re-loading the host SLB entries when exiting from a hash
guest. Restore it.

Fixes: 68ad28a4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side channel")
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Commit 68ad28a4 ("KVM: PPC: Book3S HV: Fix radix guest SLB side
channel") changed the older guest entry path, with the side effect
that vcpu->arch.slb_max no longer gets cleared for a radix guest.
This means that a HPT guest which loads some SLB entries, switches to
radix mode, runs the guest using the old guest entry path (e.g.,
because the indep_threads_mode module parameter has been set to
false), and then switches back to HPT mode would now see the old SLB
entries being present, whereas previously it would have seen no SLB
entries.

To avoid changing guest-visible behaviour, this adds a store
instruction to clear vcpu->arch.slb_max for a radix guest using the
old guest entry path.
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

These machines don't support running both MMU types at the same time,
so remove the KVM_CAP_PPC_MMU_HASH_V3 capability when the host is
using Radix MMU.

[paulus@ozlabs.org - added defensive check on
 kvmppc_hv_ops->hash_v3_possible]
Signed-off-by: NFabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

The Facility Status and Control Register is a privileged SPR that
defines the availability of some features in problem state. Since it
can be written by the guest, we must restore it to the previous host
value after guest exit.

This restoration is currently done by taking the value from
current->thread.fscr, which in the P9 path is not enough anymore
because the guest could context switch the QEMU thread, causing the
guest-current value to be saved into the thread struct.

The above situation manifested when running a QEMU linked against a
libc with System Call Vectored support, which causes scv
instructions to be run by QEMU early during the guest boot (during
SLOF), at which point the FSCR is 0 due to guest entry. After a few
scv calls (1 to a couple hundred), the context switching happens and
the QEMU thread runs with the guest value, resulting in a Facility
Unavailable interrupt.

This patch saves and restores the host value of FSCR in the inner
guest entry loop in a way independent of current->thread.fscr. The old
way of doing it is still kept in place because it works for the old
entry path.
Signed-off-by: NFabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Eliminate the following coccicheck warning:
./arch/powerpc/kvm/booke.c:701:2-3: Unneeded semicolon
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

IH=6 may preserve hypervisor real-mode ERAT entries and is the
recommended SLBIA hint for switching partitions.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

The slbmte instruction is legal in radix mode, including radix guest
mode. This means radix guests can load the SLB with arbitrary data.

KVM host does not clear the SLB when exiting a guest if it was a
radix guest, which would allow a rogue radix guest to use the SLB as
a side channel to communicate with other guests.

Fix this by ensuring the SLB is cleared when coming out of a radix
guest. Only the first 4 entries are a concern, because radix guests
always run with LPCR[UPRT]=1, which limits the reach of slbmte. slbia
is not used (except in a non-performance-critical path) because it
can clear cached translations.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NFabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

This reverts much of commit c0101509 ("KVM: PPC: Book3S HV: Run HPT
guests on POWER9 radix hosts"), which was required to run HPT guests on
RPT hosts on early POWER9 CPUs without support for "mixed mode", which
meant the host could not run with MMU on while guests were running.

This code has some corner case bugs, e.g., when the guest hits a machine
check or HMI the primary locks up waiting for secondaries to switch LPCR
to host, which they never do. This could all be fixed in software, but
most CPUs in production have mixed mode support, and those that don't
are believed to be all in installations that don't use this capability.
So simplify things and remove support.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Tested-by: NFabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Introduce KVM_CAP_PPC_DAWR1 which can be used by QEMU to query whether
KVM supports 2nd DAWR or not. The capability is by default disabled
even when the underlying CPU supports 2nd DAWR. QEMU needs to check
and enable it manually to use the feature.
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

KVM code assumes single DAWR everywhere. Add code to support 2nd DAWR.
DAWR is a hypervisor resource and thus H_SET_MODE hcall is used to set/
unset it. Introduce new case H_SET_MODE_RESOURCE_SET_DAWR1 for 2nd DAWR.
Also, KVM will support 2nd DAWR only if CPU_FTR_DAWR1 is set.
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>