And fix the fallout.
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Unused.
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Unused.
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Per current logics, the features to enable are determined together
by driver and pptable. This is not efficient in co-debug with
firmware team.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

we should pass irq type, instead of irq client id,
to irq_get/put interface
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The power limit retrieval should be done per asic. Since we may
need to lookup in the pptable and that's really asic specific.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There may be 1Mhz delta between target and actual frequency. That
should be taken into consideration for current level check.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable arcturus UMD PSTATE support.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make sure we can still get the accurate gfxclk/uclk/socclk frequency
even on dpm disabled.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

remove redundacy debug log in smu.
eg:
[ 6897.969447] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024114] amdgpu: [powerplay] Unsupported SMU message: 38
[ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024152] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078296] amdgpu: [powerplay] Unsupported SMU message: 38
[ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078333] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6901.133230] amdgpu: [powerplay] Unsupported SMU message: 38
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Those bitmask prefixed by "SMU_" should be used.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add missing feature maps for arcturus.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support arcturus fan speed retrieval.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable arcturus real-time clock retrieval.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support sensor reading for gpu loading, power and
temperatures.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Initialize arcturus SMU metrics table.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VCN should be used for Vega20 later ASICs while UVD and VCE
are for previous ASICs.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No VCN DPM bit check as that's different from VCN PG. Also
no extra check for possible double enablement/disablement
as that's already done by VCN.

v2: check return value of smu_feature_set_enabled
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Commonly used for VCN powergate status retrieval for SW SMU.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable VCN powergate status report on Raven.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VCN is widely used in new ASICs and different from tranditional
UVD and VCE.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update for sdma ras ecc_irq and other minors.
Signed-off-by: NLe Ma <le.ma@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Arcturus has different _BASE_IDX value in some HWIP_offset.h. To make source
files like smu_v11_0.c and soc15.c that include HWIP_offset.h of Vega20
reusable for Arcturus, align this base offset with Vega20.
Signed-off-by: NLe Ma <le.ma@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As for now, only "Prefetcher" is guarded to be working from
SMU firmware.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Arcturus VCN should powergate in the way as Navi.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Arcturus powerplay is ready to use.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Initialize base address for those IPs which are used in powerplay.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable arcturus SW SMU routines.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Arcturus ASIC specific powerplay interfaces.

V2: correct SMU msg naming
    drop unnecessary debugs

V3: rebase (Alex)
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Correct header and fix typo.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It guides how driver should interface with SMU in arcturus.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is especially useful in early bring up phase.

v2: disabled by default (Alex)
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

New smcdpminfo table used in arcturus.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VCC moved out of user SGPR allocation in gfx10. It's now stored
in SGPRs 106-107.

Also fixes incorrect SGPR read offsets.

Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: NJay Cornwall <jay.cornwall@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nshaoyunl <shaoyun.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These moved from SGPRs in gfx9 to HWREG in gfx10.

Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: NJay Cornwall <jay.cornwall@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nshaoyunl <shaoyun.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Copy/paste error, first 4 VGPRs are separated by 64 dwords (256 bytes).

Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: NJay Cornwall <jay.cornwall@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nshaoyunl <shaoyun.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We were previously forcing the uclk for every state to max and reducing
the switch time to prevent uclk switching from occuring. This workaround
was previously needed in order to avoid hangs + underflow under certain
display configurations.

Now that DC has the proper fix complete we can drop the hacks and
improve power for most display configurations.

[How]
We still need the function pointers hooked up to grab the real uclk
states from pplib. The rest of the prior hack can be reverted.

The key requirements here are really just DC support, updated firmware,
and support for disabling p-state support when needed in pplib/smu.

When these requirements are met uclk switching works without underflow
or hangs.

Fixes: 02316e96 ("drm/amd/display: Force uclk to max for every state")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In order to support uclk switching on NV10 the SOC bounding box
needs to be updated.

[How]
We currently read the constants from the gpu info FW, but supporting
workarounds in DC for different versions of the FW adds additional
complexity to the codebase.

NV10 has been released so it's cleanest to keep the bounding box and
source code in sync by embedding the bounding box like we do for
other ASICs.

Fixes: 02316e96 ("drm/amd/display: Force uclk to max for every state")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().

Fix the path by allocating the array with kcalloc().

The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.
Signed-off-by: NWang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We always need to drop the ctx reference and should check
for errors first and then dereference the fence pointer.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>