- 06 11月, 2018 29 次提交
-
-
由 Christian König 提交于
Needed to start using the paging queue. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NHuang Rui <ray.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Just the common helper and a new ring in the SDMA instance. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NHuang Rui <ray.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Under SRIOV we were enabling the ring buffer before it was initialized. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NHuang Rui <ray.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Thomas Zimmermann 提交于
So far, struct ttm_bo_global_ref was the only way of initializing a struct ttm_bo_global. Providing separate initializer and release functions for struct ttm_bo_global gives drivers the option of implementing their own init and release callbacks for drm_global_references of type DRM_GLOBAL_TTM_BO. The original functions for initializing and releasing via struct ttm_bo_global_ref are wrappers around the new interfaces. Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Thomas Zimmermann 提交于
The functions ttm_bo_global_init() and ttm_bo_global_release() do not receive an argument of type struct ttm_bo_global. Both take a struct drm_global_reference that contains points to a struct ttm_bo_global_ref. Renaming them reflects this. Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 SivapiriyanKumarasamy 提交于
Force the E2 to dc_fixpt_one when E1 exceeds that value. This is the correct thing to do to avoid corruption. Signed-off-by: NSivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bhawanpreet Lakha 提交于
cstate_pstate_watermarks_st1 -> cstate_pstate_watermarks_st Signed-off-by: Nvikrant mhaske <vikrant.mhaske@amd.com> Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bhawanpreet Lakha 提交于
explicitly cast uint64_t in div64_u64_rem() Signed-off-by: Nvikrant mhaske <vikrant.mhaske@amd.com> Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 SivapiriyanKumarasamy 提交于
Signed-off-by: NSivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
This adds the hw block as well as hooks up dppclk dto programming Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
In preparation for adding the actual dccg block since the current implementation of dccg is mor eof a clock manager than a hw block Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Fatemeh Darbehani 提交于
[Why] In DCN we want direct DAL to SMU calls, with as little as possible interference by pplib. The reason for each pp_smu interface mapping to 1 SMU message is so we can have the sequencing of different SMU message in dal and shared across different OS. This will also simplify debugging as DAL owns this interaction and there's no confusion about division of ownership. [How] Part 2: Separate set_min_deep_sleep_dcfclk message from the SMU messages that are sent as part of dm_pp_apply_clock_for_voltage_request. Directly notify min dcfclk to smu Signed-off-by: NFatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Fatemeh Darbehani 提交于
[Why] In DCN we want direct DAL to SMU calls, with as little as possible interference by pplib. The reason for each pp_smu interface mapping to 1 SMU message is so we can have the sequencing of different SMU message in dal and shared across different OS. This will also simplify debugging as DAL owns this interaction and there's no confusion about division of ownership. [How] Part 1: Separate set_min_deep_Sleep_dcfclk message from the SMU messages that are sent as part of dcn10_pplib_apply_display_requirements. Notify deep sleep dcfclk to smu directly Signed-off-by: NFatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Bernstein 提交于
[Why] Need separate feature flag for DP 4:2:0 support, since existing flag is used for HDMI [How] Added dp_ycbcr420_supported to struct encoder_feature_support Signed-off-by: NEric Bernstein <eric.bernstein@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Yang 提交于
[Why] Previous logic to update display count in commit_planes_do_stream_update doesn't cover all cases. [How] Update display count as part of clock updates. Count virtual stream as active to work around headless situation. Signed-off-by: NEric Yang <Eric.Yang2@amd.com> Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nevenko Stupar 提交于
Make these functions non static and define registers for future use is_lower_pipe_tree_visible(); is_upper_pipe_tree_visible(); is_pipe_tree_visible(); dcn10_program_pte_vm(); set_hdr_multiplier(); update_dchubp_dpp() find_top_pipe_for_stream() Signed-off-by: NNevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 David Francis 提交于
[Why] dc_transfer_func structs were being passed around with a null pointer, waiting for unsuspecting programmers to dereference it. [How] Initialize it Signed-off-by: NDavid Francis <David.Francis@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 SivapiriyanKumarasamy 提交于
[Why] Freesync 2 HDR and support for HDR content outside the range of the HDR display require implementation on Dal 3 to better match Dal2. [How] Add support for Freesync HDR and mapping of source content to display ranges for better representation of HDR content. Signed-off-by: NSivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
Currently dccg contains code related to every dcn revision in a single file. This change splits out the dcn parts of code into correct folders Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
Move things not accessed outside dccg block into dce specific struct Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Harmanprit Tatla 提交于
[Why] Current render margin time is not sufficient to compute exit frame time for most monitors. [How] Declared render margin in FPS to compute a exit frame rate that is 4 FPS above the minimum FPS required to engage FreeSync. Also did code clean-up to remove redundancies. Signed-off-by: NHarmanprit Tatla <htatla@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
This is done to keep things more readable, avoids a true/false flag in dc interface layer. Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
This is done to clear up the clock programming sequence since the only time we need to notify pplib is after clock update. This also renames the clk block to dccg, at the moment this block contains both clock management and dccg functionality. Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
When vstartup is larger than vblank end we need to set v_fp2 to allow for this early start Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Fatemeh Darbehani 提交于
Signed-off-by: NFatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: NSteven Chiu <Steven.Chiu@amd.com> Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Frank.Min 提交于
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NFrank.Min <Frank.Min@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced "Pass through." with "Fall through.", which is what GCC is expecting to find. Addresses-Coverity-ID: 114734 ("Missing break in switch") Addresses-Coverity-ID: 114735 ("Missing break in switch") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1357317 ("Missing break in switch") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 zhong jiang 提交于
kmemdup has implemented the function that kmalloc() + memcpy(). We prefer to kmemdup rather than code opened implementation. Signed-off-by: Nzhong jiang <zhongjiang@huawei.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 03 11月, 2018 3 次提交
-
-
由 Guo Ren 提交于
The driver is for gx6605s SOC system timer and there are two same timers in gx6605s. We use one for clkevt and another one for clksrc. The timer is mmio map to access, so we need give mmio address in dts. The counter at 0x0 offset is clock event. The counter at 0x40 offset is clock source. Signed-off-by: NGuo Ren <ren_guo@c-sky.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Guo Ren 提交于
The driver is for C-SKY SMP timer. It only supports oneshot event and 32bit overflow for clocksource. Per cpu core has one timer and all timers share one clock-counter-input from the same clocksource. This use mfcr&mtcr instructions to access the regs. Signed-off-by: NGuo Ren <ren_guo@c-sky.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Marc Zyngier 提交于
The Keystone QMSS driver is pretty damaged, in the sense that it does things like this: irq_set_affinity_hint(irq, to_cpumask(&cpu_map)); where cpu_map is a local variable. As we leave the function, this will point to nowhere-land, and things will end-up badly. Instead, let's use a proper cpumask that gets allocated, giving the driver a chance to actually work with things like irqbalance as well as have a hypothetical 64bit future. Cc: stable@vger.kernel.org Acked-by: NSantosh Shilimkar <ssantosh@kernel.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 02 11月, 2018 5 次提交
-
-
由 Keith Busch 提交于
The nvme pci driver had been adding its CMB resource to the P2P DMA subsystem everytime on on a controller reset. This results in the following warning: ------------[ cut here ]------------ nvme 0000:00:03.0: Conflicting mapping in same section WARNING: CPU: 7 PID: 81 at kernel/memremap.c:155 devm_memremap_pages+0xa6/0x380 ... Call Trace: pci_p2pdma_add_resource+0x153/0x370 nvme_reset_work+0x28c/0x17b1 [nvme] ? add_timer+0x107/0x1e0 ? dequeue_entity+0x81/0x660 ? dequeue_entity+0x3b0/0x660 ? pick_next_task_fair+0xaf/0x610 ? __switch_to+0xbc/0x410 process_one_work+0x1cf/0x350 worker_thread+0x215/0x3d0 ? process_one_work+0x350/0x350 kthread+0x107/0x120 ? kthread_park+0x80/0x80 ret_from_fork+0x1f/0x30 ---[ end trace f7ea76ac6ee72727 ]--- nvme nvme0: failed to register the CMB This patch fixes this by registering the CMB with P2P only once. Signed-off-by: NKeith Busch <keith.busch@intel.com> Reviewed-by: NLogan Gunthorpe <logang@deltatee.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 James Smart 提交于
The patch made to avoid Coverity reporting of out of bounds access on aen_op moved the assignment of a pointer, leaving it null when it was subsequently used to calculate a private pointer. Thus the private pointer was bad. Move/correct the private pointer initialization to be in sync with the patch. Fixes: 0d2bdf9f ("nvme-fc: rework the request initialization code") Signed-off-by: NJames Smart <jsmart2021@gmail.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Dennis Zhou 提交于
This reverts a series committed earlier due to null pointer exception bug report in [1]. It seems there are edge case interactions that I did not consider and will need some time to understand what causes the adverse interactions. The original series can be found in [2] with a follow up series in [3]. [1] https://www.spinics.net/lists/cgroups/msg20719.html [2] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/ [3] https://lore.kernel.org/lkml/20181020185612.51587-1-dennis@kernel.org/ This reverts the following commits: d459d853, b2c3fa54, 101246ec, b3b9f24f, e2b09899, f0fcb3ec, c839e7a0, bdc24917, 74b7c02a, 5bf9a1f3, a7b39b4e, 07b05bcc, 49f4c2dc, 27e6fa99Signed-off-by: NDennis Zhou <dennis@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Ming Lei 提交于
brd_free() may be called in failure path on one brd instance which disk isn't added yet, so release handler of gendisk may free the associated request_queue early and causes the following use-after-free[1]. This patch fixes this issue by associating gendisk with request_queue just before adding disk. [1] KASAN: use-after-free Read in del_timer_syncNon-volatile memory driver v1.3 Linux agpgart interface v0.103 [drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0 usbcore: registered new interface driver udl ================================================================== BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 Read of size 8 at addr ffff8801d1b6b540 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844 del_timer_sync+0xb7/0x270 kernel/time/timer.c:1283 blk_cleanup_queue+0x413/0x710 block/blk-core.c:809 brd_free+0x5d/0x71 drivers/block/brd.c:422 brd_init+0x2eb/0x393 drivers/block/brd.c:518 do_one_initcall+0x145/0x957 init/main.c:890 do_initcall_level init/main.c:958 [inline] do_initcalls init/main.c:966 [inline] do_basic_setup init/main.c:984 [inline] kernel_init_freeable+0x5c6/0x6b9 init/main.c:1148 kernel_init+0x11/0x1ae init/main.c:1068 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:350 Reported-by: syzbot+3701447012fe951dabb2@syzkaller.appspotmail.com Signed-off-by: NMing Lei <ming.lei@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Rob Herring 提交于
In most cases, nodes with 'status = "disabled";' are treated as if the node is not present though it is a common bug to forget to check that. However, cpu nodes are different in that "disabled" simply means offline and the OS can bring the CPU core online. Commit f1f207e4 ("of: Add cpu node iterator for_each_of_cpu_node()") followed the common behavior of ignoring disabled cpu nodes. This breaks some powerpc systems (at least NXP P50XX/e5500). Fix this by dropping the status check. Fixes: 651d44f9 ("of: use for_each_of_cpu_node iterator") Fixes: f1f207e4 ("of: Add cpu node iterator for_each_of_cpu_node()") Reported-by: NChristian Zigotzky <chzigotzky@xenosoft.de> Tested-by: NMichael Ellerman <mpe@ellerman.id.au> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
- 01 11月, 2018 3 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Christoph Hellwig 提交于
We plan to enable building the PCMCIA core and drivers, and the non-prefixed PCMCIA name clashes with some arch headers. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Christian König 提交于
This is still completely breaking my Raven system. This reverts commit cdf2f910fa969adca1b0e3ad2b487821233dc038. Revert until we sort out the sbios and firmware combinations that work correctly. bug: https://bugs.freedesktop.org/show_bug.cgi?id=108606 Cc: stable@vger.kernel.org # v4.19 Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-