- 20 11月, 2013 1 次提交
-
-
由 David Henningsson 提交于
You're looking at a casual headset patch, for a specific hardware it will match, and suddenly, the headset jack will work, so please apply this simple quirk! BugLink: https://bugs.launchpad.net/bugs/1253038Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 11月, 2013 3 次提交
-
-
由 David Henningsson 提交于
The docking station is a Thinkpad thing, so it makes sense to check for mute/micmute LEDs for that quirk type too. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
'snd_pcm_format_t' is used by amdtp_out_stream_set_pcm_format(). Currently, when just including amdtp.h, compiler cannot find this type because this type is defined in uapi/sound/asound.h and this header is not included by amdtp.h. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use select FW_LOADER instead of depends on. It's more intuitive and more consistent with other entries. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 11月, 2013 1 次提交
-
-
由 David Henningsson 提交于
We're using the ACPI interface to detect whether we're dealing with a Thinkpad or not. This way we're not loading the thinkpad_acpi module when we're not on a Thinkpad, but at the same time, we give the opportunity to check for, and potentially enable, both present and future Thinkpad with mute/micmute LEDs. At least those running the ALC269 family (269 to 299) of Realtek codecs. Cc: Alex Hung <alex.hung@canonical.com> Tested-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 11月, 2013 1 次提交
-
-
由 Takashi Iwai 提交于
Merge tag 'asoc-v3.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.13 A few fixes in drivers, the i.MX and wm8962 fixes are for a pretty nasty issues for users of those drivers if they run into them.
-
- 15 11月, 2013 10 次提交
-
-
由 Vitaliy Kulikov 提交于
Adds linear EQ filtering for integrated speaker protection Signed-off-by: NVitaliy Kulikov <vitaliy.kulikov@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Brian Austin 提交于
The mask for CS42L52_MIC_CTL_TYPE_MASK was wrong keeping the mic config from being set correctly. Signed-off-by: NBrian Austin <brian.austin@cirrus.com> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
由 Nicolin Chen 提交于
It's safer to turn on regcache_cache_only before disabling regulator since the driver will turn off the regcache_cache_only after enabling regulator. If we remain cache_only false, some command like 'amixer cset' would get failure if being run before wm8962_resume(). Signed-off-by: NNicolin Chen <b42378@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
由 Takashi Iwai 提交于
The recent change in sysfs triggered a kernel WARNING at unloading a sound driver like WARNING: CPU: 3 PID: 2247 at fs/sysfs/group.c:214 sysfs_remove_group+0xe8/0xf0() sysfs group ffffffff81ab7b20 not found for kobject 'event14' for each jack instance. It's because the unregistration of jack input device is done in dev_free callback, which is called after snd_card_disconnect(). Since device_unregister(card->card_dev) is called in snd_card_disconnect(), the whole sysfs entries belonging to card->card_dev have been already removed recursively. Thus this results in a warning as input_unregister_device() yet tries to unregister the already removed sysfs entry. For fixing this mess, we need to unregister the jack input device at dev_disconnect callback so that it's called before unregistering the card->card_dev. Reviwed-by: NMark Brown <broonie@linaro.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 11月, 2013 5 次提交
-
-
由 Takashi Iwai 提交于
The current code may access to the already freed object. The input device must be accessed and unregistered before freeing the top level sound object. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Oskar Schirmer 提交于
Unbalanced calls to snd_imx_pcm_trigger() may result in endless FIQ activity and thus provoke eternal sound. While on the first glance, the switch statement looks pretty symmetric, the SUSPEND/RESUME pair is not: the suspend case comes along snd_pcm_suspend_all(), which for fsl/imx-pcm-fiq is called only at snd_soc_suspend(), but the resume case originates straight from the SNDRV_PCM_IOCTL_RESUME. This way userland may provoke an unbalanced resume, which might cause the fiq_enable counter to increase and never return to zero again, so eventually imx_pcm_fiq is never disabled. Simply removing the fiq_enable will solve the problem, as long as one never goes play and capture game simultaneously, but beware trying both at once, the early TRIGGER_STOP will cut off the other activity prematurely. So now playing and capturing is scrutinized separately, instead of by counting. Signed-off-by: NOskar Schirmer <oskar@scara.com> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
由 Takashi Iwai 提交于
Fixes: 4b2ffc20 ('ASoC: Blackfin I2S: add 8-bit sample support') Reported-by: David Binderman Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
由 Vasily Khoruzhick 提交于
Add support for front jack channel selector which is present on EMU0204. It allows to get 4 channels out of this soundcard. Tested-by: NYury Bushmelev <jay@jay-tech.ru> Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
snd_hda_codec_reset() is called either in resetting the whole setup at error paths or hwdep clear/reconfig sysfs triggers. But all of these don't assume that the power has to be off, rather they want to keep the power state unchanged (e.g. reconfig_codec() calls the power up/down by itself). Thus, unconditionally clearing the power state in snd_hda_codec_reset() leads to the inconsistency, confuses the further operation. This patch gets rid of the lines doing that bad thing. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 11月, 2013 5 次提交
-
-
由 Richard Fitzgerald 提交于
Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Takashi Iwai 提交于
Similarly as other laptops with AD1981 & co codecs, we can control EAPD on AD1986A more safely depending on the Master switch, in order to save some power. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The only EAPD on AD1986A is on NID 0x1b where usually the speaker. But this doesn't control only the speaker amp but may influence on all outputs, e.g. Lenovo N100 laptop seems to have this issue. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
We allocate only 4 bytes here "sizeof(int)" instead of WF_MSAMPLE_BYTES (259) which was intended. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
These functions were cut and paste and the tests for NULL weren't updated properly. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 11月, 2013 10 次提交
-
-
由 Charles Keepax 提交于
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Takashi Iwai 提交于
We don't change the EAPD bit in set_pin_eapd() if keep_eapd_on flag is set by the codec driver and enable is false. But, we also apply the flipping of enable value according to inv_eapd flag in the same function, and this confused the former check, handled as if it's turned ON. The inverted EAPD check must be applied after keep_eapd_on check, instead. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
In case there is both a multifunction headset jack and a Line Out jack, automuting was not working properly from the Line Out jack. This patch fixes that issue. Cc: stable@vger.kernel.org (3.10+) BugLink: https://bugs.launchpad.net/bugs/1250377Tested-by: NCyrus Lien <cyrus.lien@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
msnd_pinnacle.c is used for both snd-msnd-pinnacle and snd-msnd-classic drivers, and both should have different driver names. Using the same driver name results in the sysfs warning for duplicated entries like kobject: 'msnd-pinnacle.7' (cec33408): kobject_release, parent (null) (delayed) kobject: 'msnd-pinnacle' (cecd4980): kobject_release, parent cf3ad9b0 (delayed) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x7d/0xa0() sysfs: cannot create duplicate filename '/bus/isa/drivers/msnd-pinnacle' ...... Reported-by: NFengguang Wu <fengguang.wu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Richard Fitzgerald 提交于
Pausing audio playback is not an illegal state so it doesn't seem sensible for poll() to return -EBADFD on a paused stream. There's also no reason to assume that we can't write more data to the DSP while playback is paused. Remove the -EBADFD so that a stream in paused state will still report the buffer availability from poll(). It is up to the user process to manage its state so that it knows whether it is paused or not. Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by VInod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Anssi Hannula 提交于
According to the HDA specification the baseline ELD length is counted in DW of 4 bytes instead of in bytes. Fix the code accordingly. Baseline length is not used by the kernel so only the ELD exported to userspace was affected. No issues have been reported. v2: Fixed so that eld_size is adjusted upwards accordingly as well. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Anssi Hannula 提交于
The ATI/AMD video/audio latencies are specified in apparent HDMI VSDB format. In this format values above 251 are not valid (or stream component is not supported - 255), but no checking is performed since this was not mentioned in the AMD HDA verbs specification. Check that the latencies are valid before using them, and add a comment describing the formats. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Anssi Hannula 提交于
Add error checks to HBR status reads (both generic and ATI/AMD) and ATI/AMD codec reads for ELD generation. Unchecked errors in these just caused more errors later on (invalid codec writes for the HBR ones and ELD parsing errors for the ATI/AMD ELD ones), but it is better to catch them earlier. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Anssi Hannula 提交于
According to USB Audio spec v2 bits 25 and 26 of bmChannelConfig are "Back Left of Center - BLC" and "Back Right of Center - BRC", respectively. They are currently assigned to ALSA channels BLC/BRC. However, the ALSA BLC/BRC are actually the rather nonsensical "bottom left center" and "bottom right center", so the channels will be assigned wrongly. The comments in the USB code are also similarly wrong, so this is not readily apparent without looking at the actual specification. Fix the channel mapping by mapping bits 25 and 26 to RLC (Rear Left Center) and RRC (Rear Right Center), respectively, instead. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Anssi Hannula 提交于
Channel map positions FLH, FCH, FRH duplicate positions TFL, TFC, TFR. Both are the speakers above the front speakers (CEA uses "high" and USB audio uses "top" nomenclature). Since the USB audio code has used the TFx positions since v3.8 (04324ccc, "ALSA: usb-audio: add channel map support") but the HDMI code only just started using FxH in a5b7d510 ("ALSA: hda - hdmi: Fix channel maps with less common speakers") which is not yet in any released kernel, standardize on TFx instead. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 11月, 2013 2 次提交
-
-
由 Wei Yongjun 提交于
Add the missing unlock before return from function snd_cs4231_playback_prepare() in the error handling case. Fixes: 5a19b178 ('ALSA: sparc/cs4231: Use WARN_ON() instead of BUG_ON()') Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The SPDIF output MBP11,2 requires the pin control to be set/cleared for turning on/off the optical SPDIF. The red light turns off only when the corresponding pin control is cleared (or powered to D3). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64401Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 11月, 2013 2 次提交
-
-
由 Takashi Iwai 提交于
Merge tag 'asoc-v3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v3.13 Some additional fixes for v3.13, the majority of which are removals and downgrades of BUG()s from Takashi.
-
由 Kailang Yang 提交于
New codec ALC255/ALC3234 support multifunction jacks. It used for menual select the input device. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-