Move individual start address setting to viafb_set_primary_address and
viafb_set_secondary_address and make it more flexible to reuse it for
panning.  Using central functions makes it easier to follow HW
manipulations.

Remove crt locking as it should be only needed for timing manipulation.
Move iga_path manipulation to via_pci_probe.

Remove memset for screen cleaning as it is currently done only for the
second screen.  This is not needed for normal operation but has a little
chance of causing unwanted display artifacts.  This can be fixed later
more consistent and more efficient (using viafb_fillrect) if needed.

This is a code clenup, no notable runtime changes expected.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Shrink and merge viafb_update_viafb_par.  This removes a lot of duplicated
data in viafb_par.  Use the relevant data of fb_info instead.  On the way
it removes an inconsistency in handling a second framebuffer which only
worked because viafbinfo1->par is modified to point to the same viafb_par
as viafbinfo->par.

Code cleanup only, no runtime change expected.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the start address is set to an initial value every time
viafb_setmode is called.

This is not done consistently along graphic cores and not even the whole
address but often only parts of it.  On top of that it seems useless as
the real/final address will be set by viafb_set_start_addr a few lines
later.

Remove this superfluous initalization to shrink register initalization and
as a start to decouple primary and secondary display.  Code cleanup, no
notable runtime change expected.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current code initializes the register for CX700 chips 2 times due to a
missing break as discovered by Harald Welte.

As CX700 and VX800 have exactly the same register initialization we can
use one for both to avoid duplicated code.

As this is a pure code cleanup no measurable runtime effects are expected.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

EP93xx video driver plus documentation.
Signed-off-by: NRyan Mallon <ryan@bluewatersys.com>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Daniele Venzano <linux@brownhat.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRyan Mallon <ryan@bluewatersys.com>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Daniele Venzano <linux@brownhat.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If called with mode_idx = 1, rate = 68, a read occurs from
sisfb_vrate[-1].refresh.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since the previous version, return values in ioctl() function have been
modified.

[akpm@linux-foundation.org: simplify lcd_disable_raster()]
Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: NPavel Kiryukhin <pkiryukhin@ru.mvista.com>
Signed-off-by: NSteve Chen <schen@mvista.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx architecture.
LCDC specifications can be found at http://www.ti.com/litv/pdf/sprufm0a.

LCDC on DA8xx consists of two independent controllers, the Raster
Controller and the LCD Interface Display Driver (LIDD) controller.  LIDD
further supports character and graphic displays.

This patch adds support for the graphic display (Sharp LQ035Q3DG01) found
on the DA830 based EVM.  The EVM details can be found at:
http://support.spectrumdigital.com/boards/dskda830/revc/.
Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: NPavel Kiryukhin <pkiryukhin@ru.mvista.com>
Signed-off-by: NSteve Chen <schen@mvista.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
DESC
davinci-fb-frame-buffer-driver-for-ti-da8xx-omap-l1xx-fix
EDESC
From: Andrew Morton <akpm@linux-foundation.org>

fix kconfig indenting

Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Pavel Kiryukhin <pkiryukhin@ru.mvista.com>
Cc: Steve Chen <schen@mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since `+' has a higher precedence than the trinary operator `?', this
added `hres * (1 << color_mode)' to the boolean testing videomode and
depth.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a framebuffer driver for Qualcomm MSM/QSD SoCs, tested on HTC Dream
smartphone (aka T-Mobile G1, aka ADP1).

Brian said:

  I did the original quick and dirty version for bringup.  Rebecca took
  over and (re)wrote the bulk of the driver, getting things stable for
  production ship of Dream and Sapphire, and Dima is currently adding
  support for later Qualcomm chipsets (QSD8x50, etc).
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Cc: Brian Swetland <swetland@google.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Rebecca Schultz Zavin <rebecca@android.com>
Cc: Dima Zavin <dima@android.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a bunch of coding style problems in atyfb_base.c.
Signed-off-by: NVille Syrjala <syrjala@sci.fi>
Cc: "H Hartley Sweeten" <hartleys@visionengravers.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes the following:
warning: assignment discards qualifiers from pointer target type
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Also move the controller specific options up in the menu, to a more
logical spot.
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- use __iomem type attribute where appropriate
- expand (a ? : b) to (a ? a : b)
As suggested by Russel King <linux@arm.linux.org.uk>

- remove a dead line from omapfb_main.c
Signed-off-by: NArun C <arunedarath@mistralsolutions.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Check wether fbdev is NULL in suspend / resume functions. Fbdev is
NULL, if there is no lcd or it is not enabled in configuration.
Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously, the only external (to dispc.c) IRQ handler was RFBI's frame
done handler.  dispc's IRQ framework was very dumb: you could only have
one handler, and the semantics of {request,free}_irq were odd, to say the
least.

The new framework allows multiple consumers to register arbitrary IRQ
masks.
Signed-off-by: NDaniel Stone <daniel.stone@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Without wakeup enable omap doesn't wake up on dispc interrupts.  This
causes problems in a case where mpu is in sleep state and dispc interrupt
fires.
Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Leaving interface clocks enabled causes dss pwrdm to stay in active state
when mpu is in active state.  This fix puts dss to sleep state when it is
not needed.

Earlier version broke framebuffer on 24xx.  This is fixed by enabling
clocks before trying to access DISPC_IRQSTATUS register.
Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- value and register offset was swapped in a dispc write
- DISPC_CONTROL register was used instead of DISPC_SYSCONFIG
- FIFO size bit field had incorrect length for OMAP3
Fixed-by: Narun <arunedarath@mistralsolutions.com>
Fixed-by: NKalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
Fixed-by: NAndrzej Zaborowski <balrog@zabor.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The LCD controller (EPSON S1D13744) supports rotation (0, 90, 180 and 270
degrees) on hardware just setting the bits 0 and 1 of 0x28 register (LCD
Panel Configuration Register).  Now it is possible to use this caps only
setting the angle degree on var rotate of fb_var_screeninfo using the
FBIOPUT_VSCREENINFO ioctl.
Fixed-by: NSiarhei Siamashka <siarhei.siamashka@nokia.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@openbossa.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add glue to control the OMAP_LDP LCD as a frame buffer device using the
existing dispc.c driver under omapfb.

Patch updated for mainline kernel.  Note that the drivers/video/omap
should be updated to pass omap_lcd_config in platform_data.  The patch
should also be updated to compile if twl4030 is not selected, and
eventually to use the regulator framework.
Fixed-by: NJarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NStanley.Miao <stanley.miao@windriver.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSteve Sakoman <steve@sakoman.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The default resolution is 1024x768@24bit

This version addresses the comments from Felipe Balbi adn Arun Edarath
Fixed-by: NFelipe Contreras <felipe.contreras@gmail.com>
Fixed-by: NSteve Sakoman <steve@sakoman.com>
Fixed-by: NJarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NKoen Kooi <koen@openembedded.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add LCD support for OMAP3 EVM

Backlight support by Arun C <arunedarath@mistralsolutions.com>
Fixed-by: NJarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NSteve Sakoman <steve@sakoman.com>
Acked-by: NSyed Mohammed Khasim <khasim@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The 3430SDP uses the same panel as the 2430SDP.  The main difference are
in the GPIO lines used for panel enable and backlight, and the VAUX
register/commands sent to the TWL4030 power subsystem.

Also, some misc. whitespace cleanups.
Fixed-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NKevin Hilman <khilman@mvsita.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

omap2evm LCD supports VGA and QVGA resolution, by default its in VGA mode.
Fixed-by: NJarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NArun C <arunedarath@mistralsolutions.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add glue to control the 2430SDP LCD as a frame buffer device using the
existing dispc.c driver under omapfb.
Fixed-by: NKevin Hilman <khilman@mvista.com>
Fixed-by: NSergio Aguirre <saaguirre@ti.com>
Fixed-by: NFrancisco Alecrim <francisco.alecrim@indt.org.br>
Fixed-by: NTony Lindgren <tony@atomide.com>
Fixed-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NHunyue Yau <hyau@mvista.com>
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is an updated version of the LCD driver for the Amstrad Delta to take
into account the recent changes to the omapfb infrastructure.  The Delta
features a 480x320 12 bit DSTN panel.
Signed-off-by: NJonathan McDowell <noodles@earth.li>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixed-by: NMike Wege <ext-mike.wege@nokia.com>
Fixed-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Fixed-by: NTimo Savola <tsavola@movial.fi>
Fixed-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
Fixed-by: NTrilok Soni <soni.trilok@gmail.com>
Signed-off-by: NImre Deak <imre.deak@solidboot.com>
Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Many gpio chips allow to generate interrupts when the value of a pin
changes.  This patch gives usermode application the opportunity to make
use of this feature by calling poll(2) on the /sys/class/gpio/gpioN/value
sysfs file.  The edge to trigger can be set in the edge file in the same
directory.  Possible values are "none", "rising", "falling", and "both".

Using level triggers is not possible with current sysfs since nothing
changes the GPIO value (and the IRQ keeps triggering).  Edge triggering
will "just work".  Note that if there was an event between read() and
poll(), the poll() returns immediately.

Also note that this version only supports true GPIO interrupts.  Some
later patch might be able to synthesize this behavior by timer-driven
polling; some systems seem to need that.

[dbrownell@users.sourceforge.net: align ids to 16 bit ids; whitespace]
Signed-off-by: NDaniel Glöckner <dg@emlix.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Drivers should be including <linux/gpio.h> not <asm/gpio.h>.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

MAX7315 is pin and software compatible with PCA9534, so add it to the I2C
device ID table of pca953x driver.
http://www.datasheetcatalog.org/datasheet/maxim/MAX7315.pdfSigned-off-by: NAlek Du <alek.du@intel.com>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Langwell chip is the IO hub for Intel Moorestown platform which has a
64-pin gpio block device inside.  It is exposed as a dedicated PCI device.
 We use it to control outside peripheral as well as to do IRQ demuxing.
The gpio block uses MSI to send level type interrupt to IOAPIC.
Signed-off-by: NAlek Du <alek.du@intel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Cc: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A GPIO driver for the Freescale MC33880 High/Low side switch
Signed-off-by: NRichard Röjfors <richard.rojfors.ext@mocean-labs.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 926b663c (gpiolib: allow GPIOs to
be named) already provides naming on the chip level. This patch provides
more flexibility by allowing multiple names where ever in sysfs on a per
GPIO basis.

Adapted from David Brownell's comments on a similar concept:
http://lkml.org/lkml/2009/4/20/203.

[randy.dunlap@oracle.com: fix build for CONFIG_GENERIC_GPIO=n]
Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Cc: Daniel Silverstone <dsilvers@simtec.co.uk>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>