Define the 2.12 bzImage boot protocol: add xloadflags and additional
fields to allow the command line, initramfs and struct boot_params to
live above the 4 GiB mark.

The xloadflags now communicates if this is a 64-bit kernel with the
legacy 64-bit entry point and which of the EFI handover entry points
are supported.

Avoid adding new read flags to loadflags because of claimed
bootloaders testing the whole byte for == 1 to determine bzImageness
at least until the issue can be researched further.

This is based on patches by Yinghai Lu and David Woodhouse.
Originally-by: NYinghai Lu <yinghai@kernel.org>
Originally-by: NDavid Woodhouse <dwmw2@infradead.org>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NDavid Woodhouse <dwmw2@infradead.org>
Acked-by: NMatt Fleming <matt.fleming@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1359058816-7615-26-git-send-email-yinghai@kernel.org
Cc: Rob Landley <rob@landley.net>
Cc: Gokul Caushik <caushik1@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joe Millenbach <jmillenbach@gmail.com>

Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

EFI provides support for providing PCI ROMs via means other than the ROM
BAR. This support vanishes after we've exited boot services, so add support
for stashing copies of the ROMs in setup_data if they're not otherwise
available.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Tested-by: NSeth Forshee <seth.forshee@canonical.com>

As things currently stand, traditional EFI boot loaders and the EFI
boot stub are carrying essentially the same initialisation code
required to setup an EFI machine for booting a kernel. There's really
no need to have this code in two places and the hope is that, with
this new protocol, initialisation and booting of the kernel can be
left solely to the kernel's EFI boot stub. The responsibilities of the
boot loader then become,

   o Loading the kernel image from boot media

File system code still needs to be carried by boot loaders for the
scenario where the kernel and initrd files reside on a file system
that the EFI firmware doesn't natively understand, such as ext4, etc.

   o Providing a user interface

Boot loaders still need to display any menus/interfaces, for example
to allow the user to select from a list of kernels.

Bump the boot protocol number because we added the 'handover_offset'
field to indicate the location of the handover protocol entry point.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Acked-and-Tested-by: NMatthew Garrett <mjg@redhat.com>
Link: http://lkml.kernel.org/r/1342689828-16815-1-git-send-email-matt@console-pimps.orgSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

The PC BIOS does provide a NUMLOCK flag containing the desired state
of this LED. This patch sets the current state according to the data
in the bios.

[ hpa: fixed __weak declaration without definition, changed "inline"
  to "static inline" ]
Signed-Off-By: NJoshua Cov <joshuacov@googlemail.com>
Link: http://lkml.kernel.org/r/CAKL7Q7rvq87TNS1T_Km8fW_5OzS%2BSbYazLXKxW-6ztOxo3zorg@mail.gmail.comAcked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

commit 37ba7ab5 ("x86, boot: make kernel_alignment adjustable; new
bzImage fields") introduced some new fields into the bzImage header
but struct setup_header was not updated accordingly. Add the missing
'pref_address' and 'init_size' fields.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1318848017-12301-1-git-send-email-matt@console-pimps.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

This patch adds minimal support for device tree on x86. The device
tree blob is passed to the kernel via setup_data which requires at
least boot protocol 2.09.

Memory size, restricted memory regions, boot arguments are gathered
the traditional way so things like cmd_line are just here to let the
code compile.

The current plan is use the device tree as an extension and to gather
information which can not be enumerated and would have to be hardcoded
otherwise. This includes things like 
   - which devices are on this I2C/SPI bus?
   - how are the interrupts wired to IO APIC?
   - where could my hpet be?
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-3-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add CE4100 platform support. CE4100 needs early setup like
moorestown.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <94720fd7f5564a12ebf202cf2c4f4c0d619aab35.1289331834.git.dirk.brandewie@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add support for saving OFW's cif, and later calling into it to run OFW
commands.  OFW remains resident in memory, living within virtual range
0xff800000 - 0xffc00000.  A single page directory entry points to the
pgdir that OFW actually uses, so rather than saving the entire page
table, we grab and install that one entry permanently in the kernel's
page table.

This is currently only used by the OLPC XO.  Note that this particular
calling convention breaks PAE and PAT, and so cannot be used on newer
x86 hardware.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
LKML-Reference: <20100618174653.7755a39a@dev.queued.net>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

x86 bootprotocol 2.07 has introduced hardware_subarch ID in the boot
parameters provided by FW. We use it to identify Moorestown platforms.

[ tglx: Cleanup and paravirt fix ]
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds kernel configuration and boot support for Intel Trusted
Execution Technology (Intel TXT).

Intel's technology for safer computing, Intel Trusted Execution
Technology (Intel TXT), defines platform-level enhancements that
provide the building blocks for creating trusted platforms.

Intel TXT was formerly known by the code name LaGrande Technology (LT).

Intel TXT in Brief:
o  Provides dynamic root of trust for measurement (DRTM)
o  Data protection in case of improper shutdown
o  Measurement and verification of launched environment

Intel TXT is part of the vPro(TM) brand and is also available some
non-vPro systems.  It is currently available on desktop systems based on
the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell Optiplex 755, HP
dc7800, etc.) and mobile systems based on the GM45, PM45, and GS45
Express chipsets.

For more information, see http://www.intel.com/technology/security/.
This site also has a link to the Intel TXT MLE Developers Manual, which
has been updated for the new released platforms.

A much more complete description of how these patches support TXT, how to
configure a system for it, etc. is in the Documentation/intel_txt.txt file
in this patch.

This patch provides the TXT support routines for complete functionality,
documentation for TXT support and for the changes to the boot_params structure,
and boot detection of a TXT launch.  Attempts to shutdown (reboot, Sx) the system
will result in platform resets; subsequent patches will support these shutdown modes
properly.

 Documentation/intel_txt.txt      |  210 +++++++++++++++++++++
 Documentation/x86/zero-page.txt  |    1
 arch/x86/include/asm/bootparam.h |    3
 arch/x86/include/asm/fixmap.h    |    3
 arch/x86/include/asm/tboot.h     |  197 ++++++++++++++++++++
 arch/x86/kernel/Makefile         |    1
 arch/x86/kernel/setup.c          |    4
 arch/x86/kernel/tboot.c          |  379 +++++++++++++++++++++++++++++++++++++++
 security/Kconfig                 |   30 +++
 9 files changed, 827 insertions(+), 1 deletion(-)
Signed-off-by: NJoseph Cihula <joseph.cihula@intel.com>
Signed-off-by: NShane Wang <shane.wang@intel.com>
Signed-off-by: NGang Wei <gang.wei@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

A long ago, in days of yore, it all began with a god named Thor.
There were vikings and boats and some plans for a Linux kernel
header.  Unfortunately, a single 8-bit field was used for bootloader
type and version.  This has generally worked without *too* much pain,
but we're getting close to flat running out of ID fields.

Add extension fields for both type and version.  The type will be
extended if it the old field is 0xE; the version is a simple MSB
extension.

Keep /proc/sys/kernel/bootloader_type containing
(type << 4) + (ver & 0xf) for backwards compatiblity, but also add
/proc/sys/kernel/bootloader_version which contains the full version
number.

[ Impact: new feature to support more bootloaders ]
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Change header guards named "ASM_X86__*" to "_ASM_X86_*" since:

a. the double underscore is ugly and pointless.
b. no leading underscore violates namespace constraints.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This patch is the result of an automatic script that consolidates the
format of all the headers in include/asm-x86/.

The format:

1. No leading underscore. Names with leading underscores are reserved.
2. Pathname components are separated by two underscores. So we can
   distinguish between mm_types.h and mm/types.h.
3. Everything except letters and numbers are turned into single
   underscores.
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

Ying Huang would like setup_data to be reserved, but not included in the
no save range.

Here we try to modify the e820 table to reserve that range early.
also add that in early_res in case bootloader messes up with the ramdisk.

other solution would be
1. add early_res_to_highmem...
2. early_res_to_e820...
but they could reserve another type memory wrongly, if early_res has some
resource reserved early, and not needed later, but it is not removed from
early_res in time. Like the RAMDISK (already handled).
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: andi@firstfloor.org
Tested-by: NHuang, Ying <ying.huang@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Because of the size limits of struct boot_params (zero page), the
maximum number of E820 memory map entries can be passed to kernel is
128. As pointed by Paul Jackson, there is some machine produced by SGI
with so many nodes that the number of E820 memory map entries is more
than 128. To enabling Linux kernel on these system, a new setup data
type named SETUP_E820_EXT is defined to pass additional memory map
entries to Linux kernel.

This patch is based on x86/auto-latest branch of git-x86 tree and has
been tested on x86_64 and i386 platform.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds linked list of struct setup_data supported for i386.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: andi@firstfloor.org
Cc: mingo@redhat.com
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch lets the early real mode code look for the 'quiet' option
on the kernel command line and pass a loadflag to the decompressor.
When this flag is set, we suppress the "Decompressing Linux... Parsing
ELF... done." messages.
Signed-off-by: NKristian Høgsberg <krh@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

commit 8b664aa6 (x86, boot: add linked
list of struct setup_data) put a new struct in bootparam.h, but didn't
use the userspace-safe types.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Huang Ying <ying.huang@intel.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds a field of 64-bit physical pointer to NULL terminated
single linked list of struct setup_data to real-mode kernel
header. This is used as a more extensible boot parameters passing
mechanism.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds basic runtime services support for EFI x86_64 system.  The
main file of the patch is the addition of efi_64.c for x86_64.  This file is
modeled after the EFI IA32 avatar.  EFI runtime services initialization are
implemented in efi_64.c.  Some x86_64 specifics are worth noting here.  On
x86_64, parameters passed to EFI firmware services need to follow the EFI
calling convention.  For this purpose, a set of functions named efi_call<x>
(<x> is the number of parameters) are implemented.  EFI function calls are
wrapped before calling the firmware service.  The duplicated code between
efi_32.c and efi_64.c is placed in efi.c to remove them from efi_32.c.
Signed-off-by: NChandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

To actually write a bootloader (or, say, the lguest launcher)
currently requires duplication of these structures.  Making them
includable from userspace is much nicer.

We merge the common userspace-required definitions of e820_32/64.h
into e820.h for export.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Updates for version 2.07 of the boot protocol.  This includes:

load_flags.KEEP_SEGMENTS- flag to request/inhibit segment reloads
hardware_subarch	- what subarchitecture we're booting under
hardware_subarch_data	- per-architecture data

The intention of these changes is to make booting a paravirtualized
kernel work via the normal Linux boot protocol.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of using magic macros for boot_params access, simply use the
boot_params structure.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Move the headers to include/asm-x86 and fixup the
header install make rules
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make "struct ist_info" valid on both i386 and x86-64, and use the
structure by name in the setup code.  Additionally, "Intel SpeedStep
IST" is redundant, refer to it as IST consistently.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Fix missing letters in the structure members of struct efi_info.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Make struct boot_params a real structure, and remove the handling of
some obsolete fields, in particular hd*_info, which was only used by
the ST-506 driver, and likely to be wrong for that driver on any
modern BIOS.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>