- 27 2月, 2010 12 次提交
-
-
由 Jiri Slaby 提交于
It will never reach here if the sws_resume_bdev is erratic. swsusp_read() is called only from software_resume(), but after swsusp_check() which would catch the error state. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Jiri Slaby 提交于
They were deprecated and removed from exported headers more than 2 years ago. Inform users about their removal in the future now. (Switch cases needed to be reorderded for an easy fall through.) And add an entry to feature-removal-schedule. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
There are some dependencies between devices (in particular, between EHCI USB controllers and their OHCI/UHCI siblings) which are not reflected by the structure of the device tree. With synchronous suspend and resume these dependencies are taken into accout automatically, because the devices in question are always registered in the right order, but to meet these constraints with asynchronous suspend and resume the drivers of these devices will need to use dpm_wait() in their suspend/resume routines, so introduce a helper function allowing them to do that. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
It has been shown by testing that total device resume time can be reduced significantly (by as much as 50% or more) if the async threads executing some devices' resume routines are all started before the main resume thread starts to handle the "synchronous" devices. This is a consequence of the fact that the slowest devices tend to be located at the end of dpm_list, so their resume routines are started very late. Consequently, they have to wait for all the preceding "synchronous" devices before their resume routines can be started by the main resume thread, even if they are "asynchronous". By starting their async threads upfront we effectively move those devices towards the beginning of dpm_list, without breaking their ordering with respect to their parents and children. As a result, their resume routines are started much earlier and we are able to save much more device resume time this way. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
Add configuration switch CONFIG_PM_ADVANCED_DEBUG for compiling in extra PM debugging/testing code allowing one to access some PM-related attributes of devices from the user space via sysfs. If CONFIG_PM_ADVANCED_DEBUG is set, add sysfs attribute power/async for every device allowing the user space to access the device's power.async_suspend flag and modify it, if desired. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
Add sysfs attribute /sys/power/pm_async allowing the user space to disable/enable asynchronous suspend/resume of devices. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
Theoretically, the total time of system sleep transitions (suspend to RAM, hibernation) can be reduced by running suspend and resume callbacks of device drivers in parallel with each other. However, there are dependencies between devices such that we're not allowed to suspend the parent of a device before suspending the device itself. Analogously, we're not allowed to resume a device before resuming its parent. The most straightforward way to take these dependencies into accout is to start the async threads used for suspending and resuming devices at the core level, so that async_schedule() is called for each suspend and resume callback supposed to be executed asynchronously. For this purpose, introduce a new device flag, power.async_suspend, used to mark the devices whose suspend and resume callbacks are to be executed asynchronously (ie. in parallel with the main suspend/resume thread and possibly in parallel with each other) and helper function device_enable_async_suspend() allowing one to set power.async_suspend for given device (power.async_suspend is unset by default for all devices). For each device with the power.async_suspend flag set the PM core will use async_schedule() to execute its suspend and resume callbacks. The async threads started for different devices as a result of calling async_schedule() are synchronized with each other and with the main suspend/resume thread with the help of completions, in the following way: (1) There is a completion, power.completion, for each device object. (2) Each device's completion is reset before calling async_schedule() for the device or, in the case of devices with the power.async_suspend flags unset, before executing the device's suspend and resume callbacks. (3) During suspend, right before running the bus type, device type and device class suspend callbacks for the device, the PM core waits for the completions of all the device's children to be completed. (4) During resume, right before running the bus type, device type and device class resume callbacks for the device, the PM core waits for the completion of the device's parent to be completed. (5) The PM core completes power.completion for each device right after the bus type, device type and device class suspend (or resume) callbacks executed for the device have returned. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
Add parent information to the messages printed by the suspend/resume core when initcall_debug is set. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
There are sysfs attributes in /sys/devices/.../power/ that haven't been documented yet in Documentation/ABI/. Document them as appropriate. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
Add new device sysfs attribute, power/control, allowing the user space to block the run-time power management of the devices. If this attribute is set to "on", the driver of the device won't be able to power manage it at run time (without breaking the rules) and the device will always be in the full power state (except when the entire system goes into a sleep state). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NAlan Stern <stern@rowland.harvard.edu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (48 commits) x86/PCI: Prevent mmconfig memory corruption ACPI: Use GPE reference counting to support shared GPEs x86/PCI: use host bridge _CRS info by default on 2008 and newer machines PCI: augment bus resource table with a list PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs PCI: read bridge windows before filling in subtractive decode resources PCI: split up pci_read_bridge_bases() PCIe PME: use pci_pcie_cap() PCI PM: Run-time callbacks for PCI bus type PCIe PME: use pci_is_pcie() PCI / ACPI / PM: Platform support for PCI PME wake-up ACPI / ACPICA: Multiple system notify handlers per device ACPI / PM: Add more run-time wake-up fields ACPI: Use GPE reference counting to support shared GPEs PCI PM: Make it possible to force using INTx for PCIe PME signaling PCI PM: PCIe PME root port service driver PCI PM: Add function for checking PME status of devices PCI: mark is_pcie obsolete PCI: set PCI_PREF_RANGE_TYPE_64 in pci_bridge_check_ranges PCI: pciehp: second try to get big range for pcie devices ...
-
由 Linus Torvalds 提交于
The five-second delay can be rather annoying, and makes the system appear much less responsive when you connect a USB drive. It's also not entirely clear that it is needed - the settling delay has at least historically been an issue on some Apple iPods, for example, and some devices have been reported to need even more than the old 5s delay. But before we penalize them all, let's see how bad it really is. Some of the reasons for long delays seem to be actual historical kernel bugs that should probably never have been papered over with a delay in the first place (there's a Ubuntu bug report for 2.6.20 about a NULL pointer dereference unless 'delay_use' is 8 or more, for example). It also looks like some distros have already shipped with delay_use=0, so the five second default may well be totally historical. In other words: "Let's see if anybody screams". Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 2月, 2010 7 次提交
-
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (41 commits) of: remove undefined request_OF_resource & release_OF_resource of/sparc: Remove sparc-local declaration of allnodes and devtree_lock of: move definition of of_chosen into common code. of: remove unused extern reference to devtree_lock of: put default string compare and #a/s-cell values into common header of/flattree: Don't assume HAVE_LMB of: protect linux/of.h with CONFIG_OF proc_devtree: fix THIS_MODULE without module.h of: Remove old and misplaced function declarations of/flattree: Make the kernel accept ePAPR style phandle information of/flattree: endian-convert members of boot_param_header of: assume big-endian properties, adding conversions where necessary of: use __be32 for cell value accessors of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsing of/flattree: use callback to setup initrd from /chosen proc_devtree: include linux/of.h of: make set_node_proc_entry private to proc_devtree.c of: include linux/proc_fs.h of/flattree: merge early_init_dt_scan_memory() common code of: add 'of_' prefix to machine_is_compatible() ...
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (31 commits) spi: Correct SPI clock frequency setting in spi_mpc8xxx spi/spi_s3c64xx.c: Fix continuation line formats spi/dw_spi: Fix dw_spi_mmio to depend on HAVE_CLK spi/dw_spi: Allow dw_spi.c to be a module spi/dw_spi: mmio code style fixups Memory-mapped dw_spi driver spi/dw_spi: fix missing export of dw_spi_remove_host spi/dw_spi: conditional transfer mode changes spi/dw_spi: remove conditional from 'poll_transfer'. spi/dw_spi: fixed a spelling typo in a warning message. spi/dw_spi: add return value to empty mrst_spi_debugfs_init() spi/dw_spi: enable platform specific chipselect. spi/dw_spi: add a FIFO depth detection spi/dw_spi: fix __init/__devinit section mismatch spi: xilinx_spi: Fix up I/O routine wrapping bogosity. spi/spi_imx: add device information by switching pr_debug() to dev_dbg() spi: update MSIOF includes spi/dw_spi: refine the IRQ mode working flow spi/dw_spi: add a missed dw_spi_remove_host() in exit sequence spi/dw_spi: bug fix in wait_till_not_busy() ...
-
由 Linus Torvalds 提交于
Merge branch 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig: kconfig: Simplify LSMOD= handling kconfig: Add LSMOD=file to override the lsmod for localmodconfig kconfig: Look in both /bin and /sbin for lsmod in streamline_config.pl kconfig: Check for if conditions in Kconfig for localmodconfig kconfig: Create include/generated for localmodconfig
-
由 Linus Torvalds 提交于
Merge branch 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig * 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig: kconfig: simplification of scripts/extract-ikconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (41 commits) HID: usbhid: initialize interface pointers early enough HID: extend mask for BUTTON usage page HID: hid-ntrig: Single touch mode tap HID: hid-ntrig: multitouch cleanup and fix HID: n-trig: remove unnecessary tool switching HID: hid-ntrig add multi input quirk and clean up HID: usbhid: introduce timeout for stuck ctrl/out URBs HID: magicmouse: coding style and probe failure fixes HID: remove MODULE_VERSION from new drivers HID: fix up Kconfig entry for MagicMouse HID: add a device driver for the Apple Magic Mouse. HID: Export hid_register_report HID: Support for MosArt multitouch panel HID: add pressure support for the Stantum multitouch panel HID: fixed bug in single-touch emulation on the stantum panel HID: fix typo in error message HID: add mapping for "AL Network Chat" usage HID: use multi input quirk for TouchPack touchscreen HID: make full-fledged hid-bus drivers properly selectable HID: make Wacom modesetting failures non-fatal ...
-
由 Jiri Kosina 提交于
Conflicts: drivers/hid/Kconfig
-
由 Thomas Gleixner 提交于
commit ff097ddd (x86/PCI: MMCONFIG: manage pci_mmcfg_region as a list, not a table) introduced a nasty memory corruption when pci_mmcfg_list is empty. pci_mmcfg_check_end_bus_number() dereferences pci_mmcfg_list.prev even when the list is empty. The following write hits some variable near to pci_mmcfg_list. Further down a similar problem exists, where cfg->list.next is dereferenced unconditionally and a comparison with some variable near to pci_mmcfg_list happens. Add a check for the last element into the for_each_entry() loop and remove all the other crappy logic which is just a leftover of the old array based code which was replaced by the list conversion. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 25 2月, 2010 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (44 commits) Add MAINTAINERS entry for virtio_console virtio: console: Fill ports' entire in_vq with buffers virtio: console: Error out if we can't allocate buffers for control queue virtio: console: Add ability to remove module virtio: console: Ensure no memleaks in case of unused buffers virtio: console: show error message if hvc_alloc fails for console ports virtio: console: Add debugfs files for each port to expose debug info virtio: console: Add ability to hot-unplug ports virtio: console: Handle port hot-plug virtio: console: Remove cached data on port close virtio: console: Register with sysfs and create a 'name' attribute for ports virtio: console: Ensure only one process can have a port open at a time virtio: console: Add file operations to ports for open/read/write/poll virtio: console: Associate each port with a char device virtio: console: Prepare for writing to userspace buffers virtio: console: Add a new MULTIPORT feature, support for generic ports virtio: console: Introduce a send_buf function for a common path for sending data to host virtio: console: Introduce function to hand off data from host to readers virtio: console: Separate out find_vqs operation into a different function virtio: console: Separate out console init into a new function ...
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: netlabel: fix export of SELinux categories > 127
-
由 Joshua Roys 提交于
This fixes corrupted CIPSO packets when SELinux categories greater than 127 are used. The bug occured on the second (and later) loops through the while; the inner for loop through the ebitmap->maps array used the same index as the NetLabel catmap->bitmap array, even though the NetLabel bitmap is twice as long as the SELinux bitmap. Signed-off-by: NJoshua Roys <joshua.roys@gtri.gatech.edu> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
-
由 Robert Hancock 提交于
Mike Cui reported that his system with an NVIDIA MCP79 (aka MCP7A) chipset stopped working with 2.6.32. The problem appears to be that 2.6.32 now enables the FPDMA auto-activate optimization in the ahci driver. The drive works fine with this enabled on an Intel AHCI so this appears to be a chipset bug. Since MCP79 is a fairly recent NVIDIA chipset and we don't have any info on whether any other NVIDIA chipsets have this issue, disable FPDMA AA optimization on all NVIDIA AHCI controllers for now. Should address http://bugzilla.kernel.org/show_bug.cgi?id=14922Signed-off-by: NRobert Hancock <hancockrwd@gmail.com> While-we-investigate-issue-this-patch-looks-good-to-me-by: NPrajakta Gudadhe <pgudadhe@nvidia.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Cc: stable@kernel.org
-
由 Rafael J. Wysocki 提交于
To fix a bug and address the reviewers' comments regarding the ACPI GPE refcounting patch, do the following additional changes: o Remove the second argument of acpi_ev_enable_gpe(), 'write_to_hardware', because it is not necessary any more. o Add the "bad parameter" test against 'type' in acpi_enable_gpe() and acpi_disable_gpe(). o Make acpi_enable_gpe() only check 'status' for runtime GPEs if acpi_ev_enable_gpe() was actually called. o Make acpi_disable_gpe() return 'status' returned by acpi_ev_disable_gpe() and fix a bug where ACPI_GPE_TYPE_WAKE and ACPI_GPE_TYPE_RUNTIME were exchanged by mistake. o Add comments explaining why acpi_set_gpe() is used by the ACPI EC driver. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Xiaotian Feng 提交于
If radix_tree_preload is failed in ima_inode_alloc, we don't need radix_tree_preload_end because kernel is alread preempt enabled Signed-off-by: NXiaotian Feng <dfeng@redhat.com> Signed-off-by: NMimi Zohar <zohar@us.ibm.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6由 Linus Torvalds 提交于
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: parisc: Set PCI CLS early in boot.
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix broken sn2 build
-
由 Carlos O'Donell 提交于
Set the PCI CLS early in the boot process to prevent device failures. In pcibios_set_master use the new pci_cache_line_size instead of a hard-coded value. Signed-off-by: NCarlos O'Donell <carlos@codesourcery.com> Reviewed-by: NGrant Grundler <grundler@google.com> Signed-off-by: NKyle McMartin <kyle@redhat.com>
-
- 24 2月, 2010 10 次提交
-
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix out_le32() macro microblaze: Fix cache loop function for cache range
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Revert "block: improve queue_should_plug() by looking at IO depths"
-
由 Steven J. Magnani 提交于
Trailing semicolon causes compilation involving out_le32() to fail. Signed-off-by: NSteven J. Magnani <steve@digidescorp.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
I create wrong asm code but none test shows that this part of code is wrong. I am not convinces that were good idea to create asm optimized macros for caches. The reason is that there is not optimization with previous code that's why make sense to add old code and do some benchmarking which functions are faster. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Amit Shah 提交于
I'm taking ownership of the virtio_console module; but I'll continue feeding patches via Rusty. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
Instead of allocating just one buffer for a port's in_vq, fill the entire in_vq with buffers so the host need not stall while an application consumes the data and makes the buffer available again for the host. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
With MULTIPORT support, the control queue is an integral part of the functioning of the device. If we can't get any buffers allocated, the host won't be able to relay important information and the device may not function as intended. Ensure 'probe' doesn't succeed until the control queue has at least one buffer allocated for its ivq. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
Add the ability to remove the virtio_console module. This aids debugging. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
If unused data exists in in_vq, ensure we flush that first and then detach unused buffers, which will ensure all buffers from the in_vq are removed. Also ensure we free the buffers after detaching them. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Amit Shah 提交于
Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-