- 11 7月, 2007 16 次提交
-
-
由 Franck Bui-Huu 提交于
Before this patch, when a platform needed to customize one constant in spaces.h, they need to redefine all of them. Now they can just redefine one constant and include the generic file header at the end: #include <asm/mach-generic/spaces.h> This patch doesn't allow to redefine CAC_BASE, IO_BASE and UNCAC_BASE for 32 bits platforms because there's no need to do so. This will avoid some macro duplications. It's important specially if we'll add complex macros. Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> delete mode 100644 include/asm-mips/mach-ip32/spaces.h
-
由 Atsushi Nemoto 提交于
Remove unused dump_tlb functions and cleanup some includes. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Unify lib-{32,64}/dump_tlb.c into lib/dump_tlb.c and move lib-32/r3k_dump_tlb.c to lib directory. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
It shares no code at all. While at it also fix up the beginning bitrot. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
No point in adding yet another #ifdef for Loongson since all this mask is being used for is converting an XKPHYS address into a physical address anyway. So replace all definitions by one with the highest architectural possible value. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Robert P. J. Day 提交于
Convert old/obsolete NORET_TYPE and ATTRIB_NORET macros to use the newer standard of "__noreturn" as defined in compiler-gcc.h. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
This patch adds support for the generic GPIO API to Au1x00 boards. It requires the generic GPIO patch for MIPS boards by Yoichi Yuasa. Now there is a MIPS target using it, can you queue these patchset for 2.6.22 ? Thank you very much in advance. Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Create fallback gpio.h which only contains prototypes for gpio API. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Adrian Bunk 提交于
"extern inline" will have different semantics with gcc 4.3, and "static inline" is correct here. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Use standard missing-syscalls with EXTRA_CFLAGS instead of duplicating the command. And move the archprepare rule before the archclean rule. Suggested by Franck Bui-Huu. Also add "echo" to show the target ABI. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 10 7月, 2007 24 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (31 commits) firewire: fw-sbp2: fix DMA mapping of management ORBs firewire: fw-sbp2: fix DMA mapping of command ORBs firewire: fw-sbp2: fix DMA mapping of S/G tables firewire: fw-sbp2: add a boundary check firewire: fw-sbp2: correctly align page tables firewire: fw-sbp2: memset wants string.h firewire: fw-sbp2: use correct speed in sbp2_agent_reset firewire: fw-sbp2: correctly dereference by container_of firewire: Document userspace ioctl interface. firewire: fw-sbp2: implement nonexclusive login firewire: fw-sbp2: let SCSI shutdown commands through before logout firewire: fw-sbp2: implement max sectors limit for some old bridges firewire: simplify a struct type firewire: support S100B...S400B and link slower than PHY firewire: optimize gap count with 1394b leaf nodes firewire: remove unused macro firewire: missing newline in printk firewire: fw-sbp2: remove unused struct member ieee1394: remove old isochronous ABI ieee1394: sbp2: change some module parameters from int to bool ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: handle cases of volume knobs generating relative values HID: Logitech keyboard 0xc311 needs reset leds quirk HID: support for logitech cordless desktop LX500 special mapping HID: fix autocentering of PID devices HID: separate quirks for report descriptor fixup HID: Add NOGET quirk for all NCR devices HID: support for Petalynx Maxter remote control HID: fix mismatch between hid-input HUT find/search mapping and the HUT HID: support for Gameron dual psx adaptor USB HID: avoid flush_scheduled_work() HID: Use menuconfig objects HID: force hid-input for Microsoft SideWinder GameVoice device HID: input mapping for Chicony KU-0418 tactical pad HID: make debugging output runtime-configurable
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (75 commits) Ethernet driver for EISA only SNI RM200/RM400 machines Extract chip specific code out of lasi_82596.c ehea: Whitespace cleanup pasemi_mac: Fix TX interrupt threshold spidernet: Replace literal with const r8169: perform RX config change after mac filtering r8169: mac address change support r8169: display some extra debug information during startup r8169: add endianess annotations to [RT]xDesc r8169: align the IP header when there is no DMA constraint r8169: add bit description for the TxPoll register r8169: cleanup r8169: remove the media option r8169: small 8101 comment r8169: confusion between hardware and IP header alignment r8169: merge with version 8.001.00 of Realtek's r8168 driver r8169: merge with version 6.001.00 of Realtek's r8169 driver r8169: prettify mac_version r8169: populate the hw_start handler for the 8110 r8169: populate the hw_start handler for the 8168 ...
-
由 Stefan Richter 提交于
The CPU must not touch the buffer after it was DMA-mapped. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
The CPU must not touch the buffer after it was DMA-mapped. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
- The CPU must not touch the buffer after it was DMA-mapped. - The size argument of dma_unmap_single(...page_table...) was bogus. - Move a comment closer to the code to which it refers to. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
Add rudimentary check for the case that the page table overflows due to merging of s/g elements by the IOMMU. This would have lead to overwriting of arbitrary memory. After this change I expect that an offending command will be unsuccessfully retried until the scsi_device is taken offline by SCSI core. It's a border case and not worth to implement a recovery strategy. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
This is required per SBP-2 clause 5.2. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
noticed by Jay Fenlason Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: NKristian Høgsberg <krh@redhat.com>
-
由 Jay Fenlason 提交于
Replace a cast with a container_of(). As long as nobody reorders the structure elements, they do the same thing, but container_of() is more readable. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (added complete_command_orb) Acked-by: NKristian Høgsberg <krh@redhat.com>
-
由 Kristian Høgsberg 提交于
The isochronous packet format is still not documented, but this is a good first step. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (format, wording)
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
This affects of course only the "soft shutdown" case, e.g. "modprobe -r firewire-sbp2", while it doesn't matter for hot unplug. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
This currently only affects one bridge in the hardwired blacklist. I don't own one of those, hence haven't tested it. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
cleanup after "firewire: support S100B...S400B and link slower than PHY" Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
Use a speed probe to determine the speed over 1394b buses and of nodes which report a link speed less than their PHY speed. Log the effective maximum speed of newly created nodes in dmesg. Also, read the config ROM (except bus info block) at the maximum speed rather than S100. This isn't a real optimization though because we still only use quadlet read requests for the entire ROM. The patch also adds support for S1600 and S3200, although such hardware does not exist yet. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
Table-based gap count optimization cannot be used if 1394b repeater PHYs are present. But it does work with 1394b leaf nodes. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Also remove some errno printouts which will be shown by infrastructure code anyway. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
cleanup after support of single-buffer requests was dropped Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Hoegsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
Based on patch "the scheduled removal of RAW1394_REQ_ISO_{SEND,LISTEN}" from Adrian Bunk, November 20 2006. This patch also removes the underlying facilities in ohci1394 and disables them in pcilynx. That is, hpsb_host_driver.devctl() and hpsb_host_driver.transmit_packet() are no longer used for iso reception and transmission. Since video1394 and dv1394 only work with ohci1394 and raw1394's rawiso interface has never been implemented in pcilynx, pcilynx is now no longer useful for isochronous applications. raw1394 will still handle the request types but will complete the requests with errors that indicate API version conflicts. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
This is upwards compatible, except that integer values other than 0 or 1 are no longer accepted. But values like "Y", "N", "no", "nnoooh!" work now. Also, improve a comment on the serialize_io parameter and make the ORB_SET_EXCLUSIVE macro ultra-safe. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Association of a host device with a node on NUMA machines optimizes allocations of skbs given from the networking stack to eth1394. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-