This patch against ia64-test-2.6.12 is needed for forthcoming
Altix chipsets. It renames geoid_any_t to geoid_common_t and
splits the 8bit 'slab' field into two 4bit fields for 'slab'
and 'slot'. Similar changes in the Altix SAL will retain backward
compatibility for old kernels.
Signed-off-by: NMark Goodwin <markgw@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Sadly, I goofed in this syscall-tuning patch:

ChangeSet 1.1966.1.40 2005/01/22 13:31:05 davidm@hpl.hp.com
  [IA64] Improve ia64_leave_syscall() for McKinley-type cores.

  Optimize ia64_leave_syscall() a bit better for McKinley-type cores.
  The patch looks big, but that's mostly due to renaming r16/r17 to r2/r3.
  Good for a 13 cycle improvement.

The problem is that the size of the physical stacked registers was
loaded into the wrong register (r3 instead of r17).  Since r17 by
coincidence always had the value 1, this had the effect of turning
rse_clear_invalid into a no-op.  That poses the risk of leaking kernel
state back to user-land and is hence not acceptable.

The fix below is simple, but unfortunately it costs us about 28 cycles
in syscall overhead. ;-(

Unfortunately, there isn't much we can do about that since those
registers have to be cleared one way or another.

	--david
Signed-off-by: NTony Luck <tony.luck@intel.com>

patch 2:
	Shub2 BTE recovery code will be implemented in SAL.  
	Define the SAL interface.
	Modify bte_error to call SAL for shub2.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

patch 1:
	Add new MMR definitions.
	Modify BTE initialiation.
	Modify BTE copy.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Patch to disable SGI TIOCA GART TLB prefetching due to hw bug.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

'min' is very picky about types of arguments, make it happy
Signed-off-by: NTony Luck <tony.luck@intel.com>

Oops.  Should have caught this before I checked it in.
Signed-off-by: NTony Luck <tony.luck@intel.com>

   This fixes a couple of bugs in the zx1/sx1000 sba_iommu.  These are
all pretty low likelihood of hitting.  The first problem is a simple off
by one, deep in the sba_alloc_range() error path.  Surrounding that was
a lock ordering problem that could have potentially deadlocked with the
order the locks are grabbed in sba_unmap_single().  I moved the resource
locking into sba_search_bitmap() to prevent this.  Finally, there's a
potential race between unmapping pdir entries and marking incoming DMA
pages clean.  If you see any oddities, please let me know, but I've
tested it pretty thoroughly here.  Tony, please apply.  Thanks,

BTW, many of the options in this driver not on by default are becoming
more and more broken.  I'll be working on some patches to clean them
out, but I wanted to get this bug fix out first.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch introduces using the quicklists for pgd, pmd, and pte levels
by combining the alloc and free functions into a common set of routines.
This greatly simplifies the reading of this header file.

This patch is simple but necessary for large numa configurations.
It simply ensures that only pages from the local node are added to a
cpus quicklist.  This prevents the trapping of pages on a remote nodes
quicklist by starting a process, touching a large number of pages to
fill pmd and pte entries, migrating to another node, and then unmapping
or exiting.  With those conditions, the pages get trapped and if the
machine has more than 100 nodes of the same size, the calculation of
the pgtable high water mark will be larger than any single node so page
table cache flushing will never occur.

I ran lmbench lat_proc fork and lat_proc exec on a zx1 with and without
this patch and did not notice any change.

On an sn2 machine, there was a slight improvement which is possibly
due to pages from other nodes trapped on the test node before starting
the run.  I did not investigate further.

This patch shrinks the quicklist based upon free memory on the node
instead of the high/low water marks.  I have written it to enable
preemption periodically and recalculate the amount to shrink every time
we have freed enough pages that the quicklist size should have grown.
I rescan the nodes zones each pass because other processess may be
draining node memory at the same time as we are adding.
Signed-off-by: NRobin Holt <holt@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Missed the "bk new" for this file in the last commit.
Signed-off-by: NBruce Losure <blosure@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch adds the necessary "hook" to allow SGI/SN
machines to perform a system power off upon a 
'init 0', 'halt -p', 'poweroff' or 'shutdown -h'.

The "hook" is to set the pm_power_off callback
to ia64_sn_power_down(). pm_power_off is checked
in machine_power_off()/do_poweroff() and, if set, is executed. 
ia64_sn_power_down() is a function already present (but not 
used currently) in the sn kernel.
ia64_sn_power_down() makes a SAL call to execute the
power off.
Signed-off-by: NAaron J Young <ayoung@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch is to provide CX port infrastructure for SGI TIO-based
h/w.   Also a 'core services' driver for SGI FPGA-based h/w.
Signed-off-by: NBruce Losure <blosure@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

- make pfm_sysctl a global such that it is possible
  to enable/disable debug printk in sampling formats
  using PFM_DEBUG.

- remove unused pfm_debug_var variable

- fix a bug in pfm_handle_work where an BUG_ON() could
  be triggered. There is a path where pfm_handle_work()
  can be called with interrupts enabled, i.e., when
  TIF_NEED_RESCHED is set. The fix correct the masking
  and unmasking of interrupts in pfm_handle_work() such
  that we restore the interrupt mask as it was upon entry.
signed-off-by: Nstephane eranian <eranian@hpl.hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch enables our TIO IO chipset to support variable length nasids in 
Shub2 chipset.
Signed-off-by: NColin Ngam <cngam@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Signed-off-by: NColin Ngam <cngam@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Fix infinite loop if sn_hwperf_location_to_bpos() fails.
Signed-off-by: NMark Goodwin <markgw@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

please accept this patch to the Altix SN platform topology export
interface to support new chipsets and to export PCI topology.

This follows on top of Jack Steiner's patch dated March 1st
("New chipset support for SN platform").
Signed-off-by: NMark Goodwin <markgw@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Recently I noticed that clearing ar.ssd/ar.csd right before srlz.d is
causing significant stalling in the syscall path.  The patch below
fixes that by moving the register-writes after srlz.d.  On a Madison,
this drops break-based getpid() from 241 to 226 cycles (-15 cycles).
Signed-off-by: NDavid Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Detect user space by the unwind frame with predicate PRED_USER_STACK
set, instead of a user space IP.  Tighten up the last ditch check for
running off the top of the kernel stack.

Based on a suggestion by David Mosberger, reworked to fit the current
tree.  This survives my stress test which used to break 2.6.9 kernels.
Unlike 2.6.11, the stress test now unwinds to the correct point, so
gdb can get the user space registers.
Signed-off-by: NKeith Owens <kaos@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Call cpu_relax() in busy-waiting loops of the ITC-syncing code.
Signed-off-by: NDavid Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Change the value of the SAL call number for a new SAL request. The
initial implementation in the PROM did not match what the OS expected. 
Since the OS can run on PROMs that do not implement the new call, 
changing the call number avoids the issue. New PROMs will implement
the new call number. (This avoids problems with the 4.05 PROM).
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Provide a driver for the altix TIOCA AGP chipset.  An agpgart backend will
be provided as a separate patch.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Move a couple of headers out of arch/ia64/sn/include/pci and into
include/asm-ia64/sn.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Provide an abstraction of the altix pci dma runtime layer so that multiple
pci-based bridges can be supported.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch makes some needlessly global code static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NBenjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

3rd argument of sys_debug_setcontext() is also a userland pointer.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

void * __iomem replaced with intended void __iomem *.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

replaced declaration of EA from u32 to unsigned long - this beast is
used only to cast it to (userland) pointer and proper integer type for
that is unsigned long. 
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* ->io_base_virt in struct pci_controller is iomem pointer.  Marked as such.
  Most of the places that used it are already annotated to expect iomem.
* places that did gratitious (and wrong) casts a-la
	isa_io_base = (unsigned long)ioremap(...);
	hose->io_base_virt = (void *)isa_io_base;
  turned into
	hose->io_base_virt = ioremap(...);
	isa_io_base = (unsigned long)hose->io_base_virt;
* pci_bus_io_base() annotated as returning iomem pointer.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sigcontext.regs is a userland pointer
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Kill build failures in the SMP+!PREEMPT case introduced
by Al Viro's spinlock.h changes.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bob Breuer wrote a patch to add dump_stack for sparc. Supposedly, this
was applied, but it doesn't exist in 2.6.11.

This is the same patch, rediffed against 2.6.11.
Signed-off-by: NTom 'spot' Callaway <tcallawa@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Peter Jones uncovered this one while we were debugging the framebuffer
issues. There are some references to -1 in the mxcc asm code, which
should be 0xffffffff.

This patch gets rid of the -1s.
Signed-off-by: NTom 'spot' Callaway <tcallawa@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sparc32 ksyms is missing a few more symbols, these are primarily
related to SMP, and will be needed as SMP gets beaten back into
functionality.

Specifically, add __cpu_data (PER_CPU), cpu_online_map, and
phys_cpu_present_map.

This patch assumes that the earlier "linux-2.6.11-sparc-fixksyms.patch"
is applied, otherwise, it will apply with fuzz.
Signed-off-by: NTom 'spot' Callaway <tcallawa@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This enables the sun linux logo to be selected on sparc32.
Signed-off-by: NBob Breuer <breuerr@mc.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds some missing sparc32 ksyms that are needed.
Specifically, ___rw_read_enter, ___rw_read_exit, ___rw_write_enter, and
sys_close.
Signed-off-by: NTom 'spot' Callaway <tcallawa@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using the same logic as the other framebuffer fixes committed in 2.6.11,
this is a set of fixes to make TCX functional on the console again. Adds
the tcx_pan_display function, sets the
all->info.var.{red,green,blue}.length values to 8, and runs fb_set_cmap.
Also looks for the correct SUNW,tcx prom value.

This patch just slipped through the cracks.

Originally by: Georg Chini <georg.chini@triaton-webhosting.com>
Signed-off-by: NTom 'spot' Callaway <tcallawa@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>