Fix use-after-free of skb when rx_handler returns RX_HANDLER_PASS.
Signed-off-by: NAndreas Steinmetz <ast@domdv.de>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If sendmsg() or sendmmsg() is called on a connected socket that hasn't had
bind() called on it, then an oops will occur when the kernel tries to
connect the call because no local endpoint has been allocated.

Fix this by implicitly binding the socket if it is in the
RXRPC_CLIENT_UNBOUND state, just like it does for the RXRPC_UNBOUND state.

Further, the state should be transitioned to RXRPC_CLIENT_BOUND after this
to prevent further attempts to bind it.

This can be tested with:

	#include <stdio.h>
	#include <stdlib.h>
	#include <string.h>
	#include <sys/socket.h>
	#include <arpa/inet.h>
	#include <linux/rxrpc.h>
	static const unsigned char inet6_addr[16] = {
		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, -1, 0xac, 0x14, 0x14, 0xaa
	};
	int main(void)
	{
		struct sockaddr_rxrpc srx;
		struct cmsghdr *cm;
		struct msghdr msg;
		unsigned char control[16];
		int fd;
		memset(&srx, 0, sizeof(srx));
		srx.srx_family = 0x21;
		srx.srx_service = 0;
		srx.transport_type = AF_INET;
		srx.transport_len = 0x1c;
		srx.transport.sin6.sin6_family = AF_INET6;
		srx.transport.sin6.sin6_port = htons(0x4e22);
		srx.transport.sin6.sin6_flowinfo = htons(0x4e22);
		srx.transport.sin6.sin6_scope_id = htons(0xaa3b);
		memcpy(&srx.transport.sin6.sin6_addr, inet6_addr, 16);
		cm = (struct cmsghdr *)control;
		cm->cmsg_len	= CMSG_LEN(sizeof(unsigned long));
		cm->cmsg_level	= SOL_RXRPC;
		cm->cmsg_type	= RXRPC_USER_CALL_ID;
		*(unsigned long *)CMSG_DATA(cm) = 0;
		msg.msg_name = NULL;
		msg.msg_namelen = 0;
		msg.msg_iov = NULL;
		msg.msg_iovlen = 0;
		msg.msg_control = control;
		msg.msg_controllen = cm->cmsg_len;
		msg.msg_flags = 0;
		fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET);
		connect(fd, (struct sockaddr *)&srx, sizeof(srx));
		sendmsg(fd, &msg, 0);
		return 0;
	}

Leading to the following oops:

	BUG: kernel NULL pointer dereference, address: 0000000000000018
	#PF: supervisor read access in kernel mode
	#PF: error_code(0x0000) - not-present page
	...
	RIP: 0010:rxrpc_connect_call+0x42/0xa01
	...
	Call Trace:
	 ? mark_held_locks+0x47/0x59
	 ? __local_bh_enable_ip+0xb6/0xba
	 rxrpc_new_client_call+0x3b1/0x762
	 ? rxrpc_do_sendmsg+0x3c0/0x92e
	 rxrpc_do_sendmsg+0x3c0/0x92e
	 rxrpc_sendmsg+0x16b/0x1b5
	 sock_sendmsg+0x2d/0x39
	 ___sys_sendmsg+0x1a4/0x22a
	 ? release_sock+0x19/0x9e
	 ? reacquire_held_locks+0x136/0x160
	 ? release_sock+0x19/0x9e
	 ? find_held_lock+0x2b/0x6e
	 ? __lock_acquire+0x268/0xf73
	 ? rxrpc_connect+0xdd/0xe4
	 ? __local_bh_enable_ip+0xb6/0xba
	 __sys_sendmsg+0x5e/0x94
	 do_syscall_64+0x7d/0x1bf
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 2341e077 ("rxrpc: Simplify connect() implementation and simplify sendmsg() op")
Reported-by: syzbot+7966f2a0b2c7da8939b4@syzkaller.appspotmail.com
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
net: bridge: fix possible stale skb pointers

In the bridge driver we have a couple of places which call pskb_may_pull
but we've cached skb pointers before that and use them after which can
lead to out-of-bounds/stale pointer use. I've had these in my "to fix"
list for some time and now we got a report (patch 01) so here they are.
Patches 02-04 are fixes based on code inspection. Also patch 01 was
tested by Martin Weinelt, Martin if you don't mind please add your
tested-by tag to it by replying with Tested-by: name <email>.
I've also briefly tested the set by trying to exercise those code paths.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't cache eth dest pointer before calling pskb_may_pull.

Fixes: cf0f02d0 ("[BRIDGE]: use llc for receiving STP packets")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We would cache ether dst pointer on input in br_handle_frame_finish but
after the neigh suppress code that could lead to a stale pointer since
both ipv4 and ipv6 suppress code do pskb_may_pull. This means we have to
always reload it after the suppress code so there's no point in having
it cached just retrieve it directly.

Fixes: 057658cb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports")
Fixes: ed842fae ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We get a pointer to the ipv6 hdr in br_ip6_multicast_query but we may
call pskb_may_pull afterwards and end up using a stale pointer.
So use the header directly, it's just 1 place where it's needed.

Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: NMartin Weinelt <martin@linuxlounge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We take a pointer to grec prior to calling pskb_may_pull and use it
afterwards to get nsrcs so record nsrcs before the pull when handling
igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling
mld2 which again could lead to reading 2 bytes out-of-bounds.

 ==================================================================
 BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge]
 Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16

 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G           OE     5.2.0-rc6+ #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
 Call Trace:
  dump_stack+0x71/0xab
  print_address_description+0x6a/0x280
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  __kasan_report+0x152/0x1aa
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  kasan_report+0xe/0x20
  br_multicast_rcv+0x480c/0x4ad0 [bridge]
  ? br_multicast_disable_port+0x150/0x150 [bridge]
  ? ktime_get_with_offset+0xb4/0x150
  ? __kasan_kmalloc.constprop.6+0xa6/0xf0
  ? __netif_receive_skb+0x1b0/0x1b0
  ? br_fdb_update+0x10e/0x6e0 [bridge]
  ? br_handle_frame_finish+0x3c6/0x11d0 [bridge]
  br_handle_frame_finish+0x3c6/0x11d0 [bridge]
  ? br_pass_frame_up+0x3a0/0x3a0 [bridge]
  ? virtnet_probe+0x1c80/0x1c80 [virtio_net]
  br_handle_frame+0x731/0xd90 [bridge]
  ? select_idle_sibling+0x25/0x7d0
  ? br_handle_frame_finish+0x11d0/0x11d0 [bridge]
  __netif_receive_skb_core+0xced/0x2d70
  ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring]
  ? do_xdp_generic+0x20/0x20
  ? virtqueue_napi_complete+0x39/0x70 [virtio_net]
  ? virtnet_poll+0x94d/0xc78 [virtio_net]
  ? receive_buf+0x5120/0x5120 [virtio_net]
  ? __netif_receive_skb_one_core+0x97/0x1d0
  __netif_receive_skb_one_core+0x97/0x1d0
  ? __netif_receive_skb_core+0x2d70/0x2d70
  ? _raw_write_trylock+0x100/0x100
  ? __queue_work+0x41e/0xbe0
  process_backlog+0x19c/0x650
  ? _raw_read_lock_irq+0x40/0x40
  net_rx_action+0x71e/0xbc0
  ? __switch_to_asm+0x40/0x70
  ? napi_complete_done+0x360/0x360
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __schedule+0x85e/0x14d0
  __do_softirq+0x1db/0x5f9
  ? takeover_tasklets+0x5f0/0x5f0
  run_ksoftirqd+0x26/0x40
  smpboot_thread_fn+0x443/0x680
  ? sort_range+0x20/0x20
  ? schedule+0x94/0x210
  ? __kthread_parkme+0x78/0xf0
  ? sort_range+0x20/0x20
  kthread+0x2ae/0x3a0
  ? kthread_create_worker_on_cpu+0xc0/0xc0
  ret_from_fork+0x35/0x40

 The buggy address belongs to the page:
 page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0
 flags: 0xffffc000000000()
 raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000
 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
 ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                     ^
 ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ==================================================================
 Disabling lock debugging due to kernel taint

Fixes: bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave")
Reported-by: NMartin Weinelt <martin@linuxlounge.net>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: NMartin Weinelt <martin@linuxlounge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. Rename r8153b_queue_wake() to r8153_queue_wake().

2. Correct the setting. The enable bit should be 0xd38c bit 0. Besides,
   the 0xd38a bit 0 and 0xd398 bit 8 have to be cleared for both enabled
   and disabled.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 86029d10 ("tls: zero the crypto information from tls_context
before freeing") added memzero_explicit() calls to clear the key material
before freeing struct tls_context, but it missed tls_device.c has its
own way of freeing this structure. Replace the missing free.

Fixes: 86029d10 ("tls: zero the crypto information from tls_context before freeing")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Neither drivers nor the tls offload code currently supports TLS
version 1.3. Check the TLS version when installing connection
state. TLS 1.3 will just fallback to the kernel crypto for now.

Fixes: 130b392c ("net: tls: Add tls 1.3 support")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cong Wang says:

====================
idr: fix overflow cases on 32-bit CPU

idr_get_next_ul() is problematic by design, it can't handle
the following overflow case well on 32-bit CPU:

u32 id = UINT_MAX;
idr_alloc_u32(&id);
while (idr_get_next_ul(&id) != NULL)
 id++;

when 'id' overflows and becomes 0 after UINT_MAX, the loop
goes infinite.

Fix this by eliminating external users of idr_get_next_ul()
and migrating them to idr_for_each_entry_continue_ul(). And
add an additional parameter for these iteration macros to detect
overflow properly.

Please merge this through networking tree, as all the users
are in networking subsystem.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reported-by: NLi Shuang <shuali@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similarly, other callers of idr_get_next_ul() suffer the same
overflow bug as they don't handle it properly either.

Introduce idr_for_each_entry_continue_ul() to help these callers
iterate from a given ID.

cls_flower needs more care here because it still has overflow when
does arg->cookie++, we have to fold its nested loops into one
and remove the arg->cookie++.

Fixes: 01683a14 ("net: sched: refactor flower walk to iterate over idr")
Fixes: 12d6066c ("net/mlx5: Add flow counters idr")
Reported-by: NLi Shuang <shuali@redhat.com>
Cc: Davide Caratti <dcaratti@redhat.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Chris Mi <chrism@mellanox.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Tested-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

idr_for_each_entry_ul() is buggy as it can't handle overflow
case correctly. When we have an ID == UINT_MAX, it becomes an
infinite loop. This happens when running on 32-bit CPU where
unsigned long has the same size with unsigned int.

There is no better way to fix this than casting it to a larger
integer, but we can't just 64 bit integer on 32 bit CPU. Instead
we could just use an additional integer to help us to detect this
overflow case, that is, adding a new parameter to this macro.
Fortunately tc action is its only user right now.

Fixes: 65a206c0 ("net/sched: Change act_api and act_xxx modules to use IDR")
Reported-by: NLi Shuang <shuali@redhat.com>
Tested-by: NDavide Caratti <dcaratti@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chris Mi <chrism@mellanox.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stefano Garzarella says:

====================
vsock/virtio: several fixes in the .probe() and .remove()

During the review of "[PATCH] vsock/virtio: Initialize core virtio vsock
before registering the driver", Stefan pointed out some possible issues
in the .probe() and .remove() callbacks of the virtio-vsock driver.

This series tries to solve these issues:
- Patch 1 adds RCU critical sections to avoid use-after-free of
  'the_virtio_vsock' pointer.
- Patch 2 stops workers before to call vdev->config->reset(vdev) to
  be sure that no one is accessing the device.
- Patch 3 moves the works flush at the end of the .remove() to avoid
  use-after-free of 'vsock' object.

v2:
- Patch 1: use RCU to protect 'the_virtio_vsock' pointer
- Patch 2: no changes
- Patch 3: flush works only at the end of .remove()
- Removed patch 4 because virtqueue_detach_unused_buf() returns all the buffers
  allocated.

v1: https://patchwork.kernel.org/cover/10964733/
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the flush of works after vdev->config->del_vqs(vdev),
because we need to be sure that no workers run before to free the
'vsock' object.

Since we stopped the workers using the [tx|rx|event]_run flags,
we are sure no one is accessing the device while we are calling
vdev->config->reset(vdev), so we can safely move the workers' flush.

Before the vdev->config->del_vqs(vdev), workers can be scheduled
by VQ callbacks, so we must flush them after del_vqs(), to avoid
use-after-free of 'vsock' object.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before to call vdev->config->reset(vdev) we need to be sure that
no one is accessing the device, for this reason, we add new variables
in the struct virtio_vsock to stop the workers during the .remove().

This patch also add few comments before vdev->config->reset(vdev)
and vdev->config->del_vqs(vdev).
Suggested-by: NStefan Hajnoczi <stefanha@redhat.com>
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some callbacks used by the upper layers can run while we are in the
.remove(). A potential use-after-free can happen, because we free
the_virtio_vsock without knowing if the callbacks are over or not.

To solve this issue we move the assignment of the_virtio_vsock at the
end of .probe(), when we finished all the initialization, and at the
beginning of .remove(), before to release resources.
For the same reason, we do the same also for the vdev->priv.

We use RCU to be sure that all callbacks that use the_virtio_vsock
ended before freeing it. This is not required for callbacks that
use vdev->priv, because after the vdev->config->del_vqs() we are sure
that they are ended and will no longer be invoked.

We also take the mutex during the .remove() to avoid that .probe() can
run while we are resetting the device.
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__vxlan_dev_create() destroys FDB using specific pointer which indicates
a fdb when error occurs.
But that pointer should not be used when register_netdevice() fails because
register_netdevice() internally destroys fdb when error occurs.

This patch makes vxlan_fdb_create() to do not link fdb entry to vxlan dev
internally.
Instead, a new function vxlan_fdb_insert() is added to link fdb to vxlan
dev.

vxlan_fdb_insert() is called after calling register_netdevice().
This routine can avoid situation that ->ndo_uninit() destroys fdb entry
in error path of register_netdevice().
Hence, error path of __vxlan_dev_create() routine can have an opportunity
to destroy default fdb entry by hand.

Test command
    ip link add bonding_masters type vxlan id 0 group 239.1.1.1 \
	    dev enp0s9 dstport 4789

Splat looks like:
[  213.392816] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  213.401257] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  213.402178] CPU: 0 PID: 1414 Comm: ip Not tainted 5.2.0-rc5+ #256
[  213.402178] RIP: 0010:vxlan_fdb_destroy+0x120/0x220 [vxlan]
[  213.402178] Code: df 48 8b 2b 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 06 01 00 00 4c 8b 63 08 48 b8 00 00 00 00 00 fc d
[  213.402178] RSP: 0018:ffff88810cb9f0a0 EFLAGS: 00010202
[  213.402178] RAX: dffffc0000000000 RBX: ffff888101d4a8c8 RCX: 0000000000000000
[  213.402178] RDX: 1bd5a00000000040 RSI: ffff888101d4a8c8 RDI: ffff888101d4a8d0
[  213.402178] RBP: 0000000000000000 R08: fffffbfff22b72d9 R09: 0000000000000000
[  213.402178] R10: 00000000ffffffef R11: 0000000000000000 R12: dead000000000200
[  213.402178] R13: ffff88810cb9f1f8 R14: ffff88810efccda0 R15: ffff88810efccda0
[  213.402178] FS:  00007f7f6621a0c0(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
[  213.402178] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  213.402178] CR2: 000055746f0807d0 CR3: 00000001123e0000 CR4: 00000000001006f0
[  213.402178] Call Trace:
[  213.402178]  __vxlan_dev_create+0x3a9/0x7d0 [vxlan]
[  213.402178]  ? vxlan_changelink+0x740/0x740 [vxlan]
[  213.402178]  ? rcu_read_unlock+0x60/0x60 [vxlan]
[  213.402178]  ? __kasan_kmalloc.constprop.3+0xa0/0xd0
[  213.402178]  vxlan_newlink+0x8d/0xc0 [vxlan]
[  213.402178]  ? __vxlan_dev_create+0x7d0/0x7d0 [vxlan]
[  213.554119]  ? __netlink_ns_capable+0xc3/0xf0
[  213.554119]  __rtnl_newlink+0xb75/0x1180
[  213.554119]  ? rtnl_link_unregister+0x230/0x230
[ ... ]

Fixes: 0241b836 ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Suggested-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It allocates the extended area for outbound streams only on sendmsg
calls, if they are not yet allocated.  When using the priority
stream scheduler, this initialization may imply into a subsequent
allocation, which may fail.  In this case, it was aborting the stream
scheduler initialization but leaving the ->ext pointer (allocated) in
there, thus in a partially initialized state.  On a subsequent call to
sendmsg, it would notice the ->ext pointer in there, and trip on
uninitialized stuff when trying to schedule the data chunk.

The fix is undo the ->ext initialization if the stream scheduler
initialization fails and avoid the partially initialized state.

Although syzkaller bisected this to commit 4ff40b86 ("sctp: set
chunk transport correctly when it's a new asoc"), this bug was actually
introduced on the commit I marked below.

Reported-by: syzbot+c1a380d42b190ad1e559@syzkaller.appspotmail.com
Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations")
Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the skb is associated with a new sock, just assigning
it to skb->sk is not sufficient, we have to set its destructor
to free the sock properly too.

Reported-by: syzbot+d6636a36d3c34bd88938@syzkaller.appspotmail.com
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid the situation where an IPV6 only flag is applied to an IPv4 address:

    # ip addr add 192.0.2.1/24 dev dummy0 nodad home mngtmpaddr noprefixroute
    # ip -4 addr show dev dummy0
    2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
        inet 192.0.2.1/24 scope global noprefixroute dummy0
           valid_lft forever preferred_lft forever

Or worse, by sending a malicious netlink command:

    # ip -4 addr show dev dummy0
    2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
        inet 192.0.2.1/24 scope global nodad optimistic dadfailed home tentative mngtmpaddr noprefixroute stable-privacy dummy0
           valid_lft forever preferred_lft forever
Signed-off-by: NMatteo Croce <mcroce@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix GUE_PFLAG_REMCSUM to use "U" cast to avoid shifting signed
32-bit value by 31 bits problem.
Signed-off-by: NVandana BN <bnvandana@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix DST_FEATURE_ECN_CA to use "U" cast to avoid shifting signed
32-bit value by 31 bits problem.
Signed-off-by: NVandana BN <bnvandana@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

default_ttl should be integer instead of bool
Reported-by: NYing Xu <yinxu@redhat.com>
Fixes: a59166e4 ("mpls: allow TTL propagation from IP packets to be configured")
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Skbs may have their checksum value populated by HW. If this is a checksum
calculated over the entire packet then the CHECKSUM_COMPLETE field is
marked. Changes to the data pointer on the skb throughout the network
stack still try to maintain this complete csum value if it is required
through functions such as skb_postpush_rcsum.

The MPLS actions in Open vSwitch modify a CHECKSUM_COMPLETE value when
changes are made to packet data without a push or a pull. This occurs when
the ethertype of the MAC header is changed or when MPLS lse fields are
modified.

The modification is carried out using the csum_partial function to get the
csum of a buffer and add it into the larger checksum. The buffer is an
inversion of the data to be removed followed by the new data. Because the
csum is calculated over 16 bits and these values align with 16 bits, the
effect is the removal of the old value from the CHECKSUM_COMPLETE and
addition of the new value.

However, the csum fed into the function and the outcome of the
calculation are also inverted. This would only make sense if it was the
new value rather than the old that was inverted in the input buffer.

Fix the issue by removing the bit inverts in the csum_partial calculation.

The bug was verified and the fix tested by comparing the folded value of
the updated CHECKSUM_COMPLETE value with the folded value of a full
software checksum calculation (reset skb->csum to 0 and run
skb_checksum_complete(skb)). Prior to the fix the outcomes differed but
after they produce the same result.

Fixes: 25cd9ba0 ("openvswitch: Add basic MPLS support to kernel")
Fixes: bc7cc599 ("openvswitch: update checksum in {push,pop}_mpls")
Signed-off-by: NJohn Hurley <john.hurley@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Bug fixes.

Miscellaneous bug fix patches, including two resource handling fixes for
the RDMA driver, a PCI shutdown patch to add pci_disable_device(), a patch
to fix ethtool selftest crash, and the last one suppresses an unnecessry
error message.

Please also queue patches 1, 2, and 3 for -stable.  Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some firmware versions do not support this so use the silent variant
to send the message to firmware to suppress the harmless error.  This
error message is unnecessarily alarming the user.

Fixes: afdc8a84 ("bnxt_en: Add DCBNL DSCP application protocol support.")
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In an earlier commit to improve NQ reservations on 57500 chips, we
set the resv_irqs on the 57500 VFs to the fixed value assigned by
the PF regardless of how many are actually used.  The current
code assumes that resv_irqs minus the ones used by the network driver
must be the ones for the RDMA driver.  This is no longer true and
we may return more MSIX vectors than requested, causing inconsistency.
Fix it by capping the value.

Fixes: 01989c6b ("bnxt_en: Improve NQ reservations.")
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current logic assumes that the RDMA driver uses one statistics
context adjacent to the ones used by the network driver.  This
assumption is not true and the statistics context used by the
RDMA driver is tied to its MSIX base vector.  This wrong assumption
can cause RDMA driver failure after changing ethtool rings on the
network side.  Fix the statistics reservation logic accordingly.

Fixes: 780baad4 ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.")
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After ethtool loopback packet tests, we re-open the nic for the next
IRQ test.  If the open fails, we must not proceed with the IRQ test
or we will crash with NULL pointer dereference.  Fix it by checking
the bnxt_open_nic() return code before proceeding.
Reported-by: NSomasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Fixes: 67fea463 ("bnxt_en: Add interrupt test to ethtool -t selftest.")
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some chips with older firmware can continue to perform DMA read from
context memory even after the memory has been freed.  In the PCI shutdown
method, we need to call pci_disable_device() to shutdown DMA to prevent
this DMA before we put the device into D3hot.  DMA memory request in
D3hot state will generate PCI fatal error.  Similarly, in the driver
remove method, the context memory should only be freed after DMA has
been shutdown for correctness.

Fixes: 98f04cf0 ("bnxt_en: Check context memory requirements from firmware.")
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a 1ms delay after reset deactivation. Otherwise the chip returns
bogus ID value. This is observed with 88E6390 (Peridot) chip.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently bnx2x ptp worker tries to read a register with timestamp
information in case of TX packet timestamping and in case it fails,
the routine reschedules itself indefinitely. This was reported as a
kworker always at 100% of CPU usage, which was narrowed down to be
bnx2x ptp_task.

By following the ioctl handler, we could narrow down the problem to
an NTP tool (chrony) requesting HW timestamping from bnx2x NIC with
RX filter zeroed; this isn't reproducible for example with ptp4l
(from linuxptp) since this tool requests a supported RX filter.
It seems NIC FW timestamp mechanism cannot work well with
RX_FILTER_NONE - driver's PTP filter init routine skips a register
write to the adapter if there's not a supported filter request.

This patch addresses the problem of bnx2x ptp thread's everlasting
reschedule by retrying the register read 10 times; between the read
attempts the thread sleeps for an increasing amount of time starting
in 1ms to give FW some time to perform the timestamping. If it still
fails after all retries, we bail out in order to prevent an unbound
resource consumption from bnx2x.

The patch also adds an ethtool statistic for accounting the skipped
TX timestamp packets and it reduces the priority of timestamping
error messages to prevent log flooding. The code was tested using
both linuxptp and chrony.
Reported-and-tested-by: NPrzemyslaw Hausman <przemyslaw.hausman@canonical.com>
Suggested-by: NSudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: NGuilherme G. Piccoli <gpiccoli@canonical.com>
Acked-by: NSudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

im->tomb and/or im->sources might not be NULL, but we
currently overwrite their values blindly.

Using swap() will make sure the following call to kfree_pmc(pmc)
will properly free the psf structures.

Tested with the C repro provided by syzbot, which basically does :

 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 3
 setsockopt(3, SOL_IP, IP_ADD_MEMBERSHIP, "\340\0\0\2\177\0\0\1\0\0\0\0", 12) = 0
 ioctl(3, SIOCSIFFLAGS, {ifr_name="lo", ifr_flags=0}) = 0
 setsockopt(3, SOL_IP, IP_MSFILTER, "\340\0\0\2\177\0\0\1\1\0\0\0\1\0\0\0\377\377\377\377", 20) = 0
 ioctl(3, SIOCSIFFLAGS, {ifr_name="lo", ifr_flags=IFF_UP}) = 0
 exit_group(0)                    = ?

BUG: memory leak
unreferenced object 0xffff88811450f140 (size 64):
  comm "softirq", pid 0, jiffies 4294942448 (age 32.070s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 ff ff ff ff 00 00 00 00  ................
    00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000c7bad083>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<00000000c7bad083>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<00000000c7bad083>] slab_alloc mm/slab.c:3326 [inline]
    [<00000000c7bad083>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
    [<000000009acc4151>] kmalloc include/linux/slab.h:547 [inline]
    [<000000009acc4151>] kzalloc include/linux/slab.h:742 [inline]
    [<000000009acc4151>] ip_mc_add1_src net/ipv4/igmp.c:1976 [inline]
    [<000000009acc4151>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2100
    [<000000004ac14566>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2484
    [<0000000052d8f995>] do_ip_setsockopt.isra.0+0x1795/0x1930 net/ipv4/ip_sockglue.c:959
    [<000000004ee1e21f>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1248
    [<0000000066cdfe74>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2618
    [<000000009383a786>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3126
    [<00000000d8ac0c94>] __sys_setsockopt+0x98/0x120 net/socket.c:2072
    [<000000001b1e9666>] __do_sys_setsockopt net/socket.c:2083 [inline]
    [<000000001b1e9666>] __se_sys_setsockopt net/socket.c:2080 [inline]
    [<000000001b1e9666>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2080
    [<00000000420d395e>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
    [<000000007fd83a4b>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 24803f38 ("igmp: do not remove igmp souce list info when set link down")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: syzbot+6ca1abd0db68b5173a4f@syzkaller.appspotmail.com
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Harini Katakam says:

====================
Sub ns increment fixes in Macb PTP

The subns increment register fields are not captured correctly in the
driver. Fix the same and also increase the subns incr resolution.

Sub ns resolution was increased to 24 bits in r1p06f2 version. To my
knowledge, this PTP driver, with its current BD time stamp
implementation, is only useful to that version or above. So, I have
increased the resolution unconditionally. Please let me know if there
is any IP versions incompatible with this - there is no register to
obtain this information from.

Changes from RFC:
None
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The subns increment register has 24 bits as follows:
RegBit[15:0] = Subns[23:8]; RegBit[31:24] = Subns[7:0]

Fix the same in the driver and increase sub ns resolution to the
best capable, 24 bits. This should be the case on all GEM versions
that this PTP driver supports.
Signed-off-by: NHarini Katakam <harini.katakam@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The scaled ppm parameter passed to _adjfine() contains a 16 bit
fraction. This just happens to be the same as SUBNSINCR_SIZE now.
Hence define this separately.
Signed-off-by: NHarini Katakam <harini.katakam@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Shifting signed 32-bit value by 31 bits is undefined.  Changing most
significant bit to unsigned.

Changes included in v2:
  - use subsystem specific subject lines
  - CC required mailing lists
Signed-off-by: NJiunn Chang <c0d1n61at3@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netfilter did not expect that skb_dst_force() can cause skb to lose its
dst entry.

I got a bug report with a skb->dst NULL dereference in netfilter
output path.  The backtrace contains nf_reinject(), so the dst might have
been cleared when skb got queued to userspace.

Other users were fixed via
if (skb_dst(skb)) {
	skb_dst_force(skb);
	if (!skb_dst(skb))
		goto handle_err;
}

But I think its preferable to make the 'dst might be cleared' part
of the function explicit.

In netfilter case, skb with a null dst is expected when queueing in
prerouting hook, so drop skb for the other hooks.

v2:
 v1 of this patch returned true in case skb had no dst entry.
 Eric said:
   Say if we have two skb_dst_force() calls for some reason
   on the same skb, only the first one will return false.

 This now returns false even when skb had no dst, as per Erics
 suggestion, so callers might need to check skb_dst() first before
 skb_dst_force().
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>