- 17 10月, 2012 8 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
This carries a WM5110, the system integration for which is essentially the same as the rev A WM5102 module. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
These use a different GPIO for the jack polarity selection. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Allow us to supply different configurations depending on the board revision, catering for changes that are visible to software. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
This is required for operation of the WM0010 on the boards. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Renumber to use SPI /CS 1 instead of 0 to allow coexistance with DSPs. Also add additional supplies for the devices while we're at it. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
No bindings for the devices yet, just names. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 14 10月, 2012 1 次提交
-
-
由 Russell King 提交于
As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. lets sort all our select statements alphanumerically. This commit was created by the following perl: while (<>) { while (/\\\s*$/) { $_ .= <>; } undef %selects if /^\s*config\s+/; if (/^\s+select\s+(\w+).*/) { if (defined($selects{$1})) { if ($selects{$1} eq $_) { print STDERR "Warning: removing duplicated $1 entry\n"; } else { print STDERR "Error: $1 differently selected\n". "\tOld: $selects{$1}\n". "\tNew: $_\n"; exit 1; } } $selects{$1} = $_; next; } if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or /^endif/ or /^endchoice/)) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } undef %selects; } print; } if (%selects) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } } It found two duplicates: Warning: removing duplicated S5P_SETUP_MIPIPHY entry Warning: removing duplicated HARDIRQS_SW_RESEND entry and they are identical duplicates, hence the shrinkage in the diffstat of two lines. We have four testers reporting success of this change (Tony, Stephen, Linus and Sekhar.) Acked-by: NJason Cooper <jason@lakedaemon.net> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 9月, 2012 1 次提交
-
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
-
- 10 8月, 2012 2 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
SPI is also connected on the board, use that instead of I2C as it's much faster. Also define platform data now the core driver is in mainline. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: fixed build error by inclusion missed header] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 08 8月, 2012 1 次提交
-
-
由 Leela Krishna Amudala 提交于
This patch moves the contents from regs-fb-v4.h and regs-fb.h to include/video/samsung_fimd.h. Also updates the header inclusion in machine files and driver files accordingly. Signed-off-by: NLeela Krishna Amudala <l.krishna@samsung.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 22 7月, 2012 1 次提交
-
-
由 Sachin Kamat 提交于
Adds header file protection macros. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 19 7月, 2012 2 次提交
-
-
由 Mark Brown 提交于
With the greater use of deferred probes we need to be more sure that initdata is actually used only at system init rather than being used by devices when they probe (which could happen after the main kernel init has completed and is much more likely to now). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Commit 1c20c2 (spi: s3c64xx: Remove the 'set_level' callback from controller data) didn't update all the users, breaking the build. Fix that. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 13 7月, 2012 5 次提交
-
-
由 Mark Brown 提交于
None of the GPIO IRQs are connected so there is no reason to specify a base. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Thomas Abraham 提交于
With the spi controller hardware configuration moved into the driver data, there are no more default hardware configuration data that is passed through platform data. Accordingly, the s3c64xx_spi{0|1|2}_set_platdata functions are adapted to these changes. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Acked-by: NJaswinder Singh <jaswinder.singh@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Thomas Abraham 提交于
The platform data pointer that is passed to the spi gpio setup functions is not used. Hence, this parameter is removed from all the spi gpio setup functions. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Acked-by: NJaswinder Singh <jaswinder.singh@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Thomas Abraham 提交于
Platform data is used to specify controller hardware specific information such as the tx/rx fifo level mask and bit offset of rx fifo level. Such information is not suitable to be supplied from device tree. Instead, it can be moved into the driver data and removed from platform data. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Acked-by: NJaswinder Singh <jaswinder.singh@linaro.org> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Thomas Abraham 提交于
Commit 4972a80e (ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers) introduced a new member 'dt_dmach_prop' in the struct samsung_dma_info which is used to specify the dma channel number property as obtained from the device tree. It also introduced a new dma request id 'DMACH_DT_PROP' to indicate that a device tree node property represting the dma channel is available in 'struct samsung_dma_info'. Add dma request id 'DMACH_DT_PROP' in s3c64xx dma channel id list in order to maintain compatibility to the changes in the Samsung dma wrappper operations. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 21 6月, 2012 1 次提交
-
-
由 Dimitris Papastamos 提交于
Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 20 6月, 2012 5 次提交
-
-
由 Mark Brown 提交于
Now that the WM831x driver uses irq_domain we can happily allow it to assign its own IRQs. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Use the new irqdomain support in the WM8994 driver to dynamically allocate the interrupt range for the WM8994 rather than doing it explicitly. This is more idiomatic for modern interrupt usage. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
No platform data yet as driver is not yet merged. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Paul Bolle 提交于
Commit 875a5937 ("ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung") deleted all (four) files that included one of the "spi-clocks.h" headers. It seems it was just an oversight to not remove those headers too. They can safely be removed now. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 18 5月, 2012 2 次提交
-
-
由 Daniel Lezcano 提交于
The timekeeping is computed from the cpuidle core if we set the .en_core_tk_irqen flag. Let's use it and remove the duplicated code. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Tested-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Daniel Lezcano 提交于
The states are now part of the cpuidle_driver structure, so we can declare the states in this structure directly. That saves us an extra variable declaration and a memcpy. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Tested-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 16 5月, 2012 2 次提交
-
-
由 Mark Brown 提交于
We now have an additional classs of modules which are enumerated at I2C address 0x22. Add hookup for these modules. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
The Bells module now has a number assigned to it. Also hook up the WM9081 which is soldered down onto the board. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 12 5月, 2012 8 次提交
-
-
由 Tushar Behera 提交于
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tushar Behera 提交于
Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tushar Behera 提交于
Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tushar Behera 提交于
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tushar Behera 提交于
Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tushar Behera 提交于
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tushar Behera 提交于
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
The regulator API now allows supplies used by regulators to be specified as normal supplies - provide the hookup for that mechanism on Cragganmore. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 10 5月, 2012 1 次提交
-
-
由 Lukasz Majewski 提交于
This commit adds a cosmetic change to the s3c-hsotg UDC driver. It moves s3c-hsotg.h to other linux/ related inclusions. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-