Any consumer that needs to access the MMRs has to provide these helpers,
so make the default into useless stubs.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (36 commits)
  Cache xattr security drop check for write v2
  fs: block_page_mkwrite should wait for writeback to finish
  mm: Wait for writeback when grabbing pages to begin a write
  configfs: remove unnecessary dentry_unhash on rmdir, dir rename
  fat: remove unnecessary dentry_unhash on rmdir, dir rename
  hpfs: remove unnecessary dentry_unhash on rmdir, dir rename
  minix: remove unnecessary dentry_unhash on rmdir, dir rename
  fuse: remove unnecessary dentry_unhash on rmdir, dir rename
  coda: remove unnecessary dentry_unhash on rmdir, dir rename
  afs: remove unnecessary dentry_unhash on rmdir, dir rename
  affs: remove unnecessary dentry_unhash on rmdir, dir rename
  9p: remove unnecessary dentry_unhash on rmdir, dir rename
  ncpfs: fix rename over directory with dangling references
  ncpfs: document dentry_unhash usage
  ecryptfs: remove unnecessary dentry_unhash on rmdir, dir rename
  hostfs: remove unnecessary dentry_unhash on rmdir, dir rename
  hfsplus: remove unnecessary dentry_unhash on rmdir, dir rename
  hfs: remove unnecessary dentry_unhash on rmdir, dir rename
  omfs: remove unnecessary dentry_unhash on rmdir, dir rneame
  udf: remove unnecessary dentry_unhash from rmdir, dir rename
  ...

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, asm: Clean up desc.h a bit
  x86, amd: Do not enable ARAT feature on AMD processors below family 0x12
  x86: Move do_page_fault()'s error path under unlikely()
  x86, efi: Retain boot service code until after switching to virtual mode
  x86: Remove unnecessary check in detect_ht()
  x86: Reorder mm_context_t to remove x86_64 alignment padding and thus shrink mm_struct
  x86, UV: Clean up uv_tlb.c
  x86, UV: Add support for SGI UV2 hub chip
  x86, cpufeature: Update CPU feature RDRND to RDRAND

Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cpuset: Fix cpuset_cpus_allowed_fallback(), don't update tsk->rt.nr_cpus_allowed
  sched: Fix ->min_vruntime calculation in dequeue_entity()
  sched: Fix ttwu() for __ARCH_WANT_INTERRUPTS_ON_CTXSW
  sched: More sched_domain iterations fixes

Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: Start RCU kthreads in TASK_INTERRUPTIBLE state
  rcu: Remove waitqueue usage for cpu, node, and boost kthreads
  rcu: Avoid acquiring rcu_node locks in timer functions
  atomic: Add atomic_or()
  Documentation: Add statistics about nested locks
  rcu: Decrease memory-barrier usage based on semi-formal proof
  rcu: Make rcu_enter_nohz() pay attention to nesting
  rcu: Don't do reschedule unless in irq
  rcu: Remove old memory barriers from rcu_process_callbacks()
  rcu: Add memory barriers
  rcu: Fix unpaired rcu_irq_enter() from locking selftests

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  perf: Fix SIGIO handling
  perf top: Don't stop if no kernel symtab is found
  perf top: Handle kptr_restrict
  perf top: Remove unused macro
  perf events: initialize fd array to -1 instead of 0
  perf tools: Make sure kptr_restrict warnings fit 80 col terms
  perf tools: Fix build on older systems
  perf symbols: Handle /proc/sys/kernel/kptr_restrict
  perf: Remove duplicate headers
  ftrace: Add internal recursive checks
  tracing: Update btrfs's tracepoints to use u64 interface
  tracing: Add __print_symbolic_u64 to avoid warnings on 32bit machine
  ftrace: Set ops->flag to enabled even on static function tracing
  tracing: Have event with function tracer check error return
  ftrace: Have ftrace_startup() return failure code
  jump_label: Check entries limit in __jump_label_update
  ftrace/recordmcount: Avoid STT_FUNC symbols as base on ARM
  scripts/tags.sh: Add magic for trace-events for etags too
  scripts/tags.sh: Fix ctags for DEFINE_EVENT()
  x86/ftrace: Fix compiler warning in ftrace.c
  ...

* 'for-usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci:
  Intel xhci: Limit number of active endpoints to 64.
  Intel xhci: Ignore spurious successful event.
  Intel xhci: Support EHCI/xHCI port switching.
  Intel xhci: Add PCI id for Panther Point xHCI host.
  xhci: STFU: Be quieter during URB submission and completion.
  xhci: STFU: Don't print event ring dequeue pointer.
  xhci: STFU: Remove function tracing.
  xhci: Don't submit commands when the host is dead.
  xhci: Clear stopped_td when Stop Endpoint command completes.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (33 commits)
  x86: poll waiting for I/OAT DMA channel status
  maintainers: add dma engine tree details
  dmaengine: add TODO items for future work on dma drivers
  dmaengine: Add API documentation for slave dma usage
  dmaengine/dw_dmac: Update maintainer-ship
  dmaengine: move link order
  dmaengine/dw_dmac: implement pause and resume in dwc_control
  dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable submission from callback
  dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT
  dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS
  dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called
  dmaengine: at_hdmac: pause: no need to wait for FIFO empty
  pch_dma: modify pci device table definition
  pch_dma: Support new device ML7223 IOH
  pch_dma: Support I2S for ML7213 IOH
  pch_dma: Fix DMA setting issue
  pch_dma: modify for checkpatch
  pch_dma: fix dma direction issue for ML7213 IOH video-in
  dmaengine: at_hdmac: use descriptor chaining help function
  dmaengine: at_hdmac: implement pause and resume in atc_control
  ...

Fix up trivial conflict in drivers/dma/dw_dmac.c

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Fix build breakage caused by tps65910 gpio directory move
  mfd: Use mfd cell platform_data for db8500-prcmu cells platform bits

* 'spi/next' of git://git.secretlab.ca/git/linux-2.6:
  spi/spi_bfin_sport: new driver for a SPI bus via the Blackfin SPORT peripheral
  spi/tle620x: add missing device_remove_file()

* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6:
  gpio/pch_gpio: Support new device ML7223
  gpio: make gpio_{request,free}_array gpio array parameter const
  GPIO: OMAP: move to drivers/gpio
  GPIO: OMAP: move register offset defines into <plat/gpio.h>
  gpio: Convert gpio_is_valid to return bool
  gpio: Move the s5pc100 GPIO to drivers/gpio
  gpio: Move the s5pv210 GPIO to drivers/gpio
  gpio: Move the exynos4 GPIO to drivers/gpio
  gpio: Move to Samsung common GPIO library to drivers/gpio
  gpio/nomadik: add function to read GPIO pull down status
  gpio/nomadik: show all pins in debug
  gpio: move Nomadik GPIO driver to drivers/gpio
  gpio: move U300 GPIO driver to drivers/gpio
  langwell_gpio: add runtime pm support
  gpio/pca953x: Add support for pca9574 and pca9575 devices
  gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535

* setns:
  ns: Wire up the setns system call

Done as a merge to make it easier to fix up conflicts in arm due to
addition of sendmmsg system call

32bit and 64bit on x86 are tested and working.  The rest I have looked
at closely and I can't find any problems.

setns is an easy system call to wire up.  It just takes two ints so I
don't expect any weird architecture porting problems.

While doing this I have noticed that we have some architectures that are
very slow to get new system calls.  cris seems to be the slowest where
the last system calls wired up were preadv and pwritev.  avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h.  frv is
behind with perf_event_open being the last syscall wired up.  On h8300
the last system call wired up was epoll_wait.  On m32r the last system
call wired up was fallocate.  mn10300 has recvmmsg as the last system
call wired up.  The rest seem to at least have syncfs wired up which was
new in the 2.6.39.

v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall  conflicts.
v7: ported to Linus's latest post 2.6.39 tree.

>  arch/blackfin/include/asm/unistd.h     |    3 ++-
>  arch/blackfin/mach-common/entry.S      |    1 +
Acked-by: NMike Frysinger <vapier@gentoo.org>

Oh - ia64 wiring looks good.
Acked-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some recent benchmarking on btrfs showed that a major scaling bottleneck
on large systems on btrfs is currently the xattr lookup on every write.

Why xattr lookup on every write I hear you ask?

write wants to drop suid and security related xattrs that could set o
capabilities for executables.  To do that it currently looks up
security.capability on EVERY write (even for non executables) to decide
whether to drop it or not.

In btrfs this causes an additional tree walk, hitting some per file system
locks and quite bad scalability. In a simple read workload on a 8S
system I saw over 90% CPU time in spinlocks related to that.

Chris Mason tells me this is also a problem in ext4, where it hits
the global mbcache lock.

This patch adds a simple per inode to avoid this problem.  We only
do the lookup once per file and then if there is no xattr cache
the decision. All xattr changes clear the flag.

I also used the same flag to avoid the suid check, although
that one is pretty cheap.

A file system can also set this flag when it creates the inode,
if it has a cheap way to do so.  This is done for some common file systems
in followon patches.

With this patch a major part of the lock contention disappears
for btrfs. Some testing on smaller systems didn't show significant
performance changes, but at least it helps the larger systems
and is generally more efficient.

v2: Rename is_sgid. add file system helper.
Cc: chris.mason@oracle.com
Cc: josef@redhat.com
Cc: viro@zeniv.linux.org.uk
Cc: agruen@linbit.com
Cc: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Upon creation, kthreads are in TASK_UNINTERRUPTIBLE state, which can
result in softlockup warnings.  Because some of RCU's kthreads can
legitimately be idle indefinitely, start them in TASK_INTERRUPTIBLE
state in order to avoid those warnings.
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It is not necessary to use waitqueues for the RCU kthreads because
we always know exactly which thread is to be awakened.  In addition,
wake_up() only issues an actual wakeup when there is a thread waiting on
the queue, which was why there was an extra explicit wake_up_process()
to get the RCU kthreads started.

Eliminating the waitqueues (and wake_up()) in favor of wake_up_process()
eliminates the need for the initial wake_up_process() and also shrinks
the data structure size a bit.  The wakeup logic is placed in a new
rcu_wait() macro.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This commit switches manipulations of the rcu_node ->wakemask field
to atomic operations, which allows rcu_cpu_kthread_timer() to avoid
acquiring the rcu_node lock.  This should avoid the following lockdep
splat reported by Valdis Kletnieks:

[   12.872150] usb 1-4: new high speed USB device number 3 using ehci_hcd
[   12.986667] usb 1-4: New USB device found, idVendor=413c, idProduct=2513
[   12.986679] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   12.987691] hub 1-4:1.0: USB hub found
[   12.987877] hub 1-4:1.0: 3 ports detected
[   12.996372] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input10
[   13.071471] udevadm used greatest stack depth: 3984 bytes left
[   13.172129]
[   13.172130] =======================================================
[   13.172425] [ INFO: possible circular locking dependency detected ]
[   13.172650] 2.6.39-rc6-mmotm0506 #1
[   13.172773] -------------------------------------------------------
[   13.172997] blkid/267 is trying to acquire lock:
[   13.173009]  (&p->pi_lock){-.-.-.}, at: [<ffffffff81032d8f>] try_to_wake_up+0x29/0x1aa
[   13.173009]
[   13.173009] but task is already holding lock:
[   13.173009]  (rcu_node_level_0){..-...}, at: [<ffffffff810901cc>] rcu_cpu_kthread_timer+0x27/0x58
[   13.173009]
[   13.173009] which lock already depends on the new lock.
[   13.173009]
[   13.173009]
[   13.173009] the existing dependency chain (in reverse order) is:
[   13.173009]
[   13.173009] -> #2 (rcu_node_level_0){..-...}:
[   13.173009]        [<ffffffff810679b9>] check_prevs_add+0x8b/0x104
[   13.173009]        [<ffffffff81067da1>] validate_chain+0x36f/0x3ab
[   13.173009]        [<ffffffff8106846b>] __lock_acquire+0x369/0x3e2
[   13.173009]        [<ffffffff81068a0f>] lock_acquire+0xfc/0x14c
[   13.173009]        [<ffffffff815697f1>] _raw_spin_lock+0x36/0x45
[   13.173009]        [<ffffffff81090794>] rcu_read_unlock_special+0x8c/0x1d5
[   13.173009]        [<ffffffff8109092c>] __rcu_read_unlock+0x4f/0xd7
[   13.173009]        [<ffffffff81027bd3>] rcu_read_unlock+0x21/0x23
[   13.173009]        [<ffffffff8102cc34>] cpuacct_charge+0x6c/0x75
[   13.173009]        [<ffffffff81030cc6>] update_curr+0x101/0x12e
[   13.173009]        [<ffffffff810311d0>] check_preempt_wakeup+0xf7/0x23b
[   13.173009]        [<ffffffff8102acb3>] check_preempt_curr+0x2b/0x68
[   13.173009]        [<ffffffff81031d40>] ttwu_do_wakeup+0x76/0x128
[   13.173009]        [<ffffffff81031e49>] ttwu_do_activate.constprop.63+0x57/0x5c
[   13.173009]        [<ffffffff81031e96>] scheduler_ipi+0x48/0x5d
[   13.173009]        [<ffffffff810177d5>] smp_reschedule_interrupt+0x16/0x18
[   13.173009]        [<ffffffff815710f3>] reschedule_interrupt+0x13/0x20
[   13.173009]        [<ffffffff810b66d1>] rcu_read_unlock+0x21/0x23
[   13.173009]        [<ffffffff810b739c>] find_get_page+0xa9/0xb9
[   13.173009]        [<ffffffff810b8b48>] filemap_fault+0x6a/0x34d
[   13.173009]        [<ffffffff810d1a25>] __do_fault+0x54/0x3e6
[   13.173009]        [<ffffffff810d447a>] handle_pte_fault+0x12c/0x1ed
[   13.173009]        [<ffffffff810d48f7>] handle_mm_fault+0x1cd/0x1e0
[   13.173009]        [<ffffffff8156cfee>] do_page_fault+0x42d/0x5de
[   13.173009]        [<ffffffff8156a75f>] page_fault+0x1f/0x30
[   13.173009]
[   13.173009] -> #1 (&rq->lock){-.-.-.}:
[   13.173009]        [<ffffffff810679b9>] check_prevs_add+0x8b/0x104
[   13.173009]        [<ffffffff81067da1>] validate_chain+0x36f/0x3ab
[   13.173009]        [<ffffffff8106846b>] __lock_acquire+0x369/0x3e2
[   13.173009]        [<ffffffff81068a0f>] lock_acquire+0xfc/0x14c
[   13.173009]        [<ffffffff815697f1>] _raw_spin_lock+0x36/0x45
[   13.173009]        [<ffffffff81027e19>] __task_rq_lock+0x8b/0xd3
[   13.173009]        [<ffffffff81032f7f>] wake_up_new_task+0x41/0x108
[   13.173009]        [<ffffffff810376c3>] do_fork+0x265/0x33f
[   13.173009]        [<ffffffff81007d02>] kernel_thread+0x6b/0x6d
[   13.173009]        [<ffffffff8153a9dd>] rest_init+0x21/0xd2
[   13.173009]        [<ffffffff81b1db4f>] start_kernel+0x3bb/0x3c6
[   13.173009]        [<ffffffff81b1d29f>] x86_64_start_reservations+0xaf/0xb3
[   13.173009]        [<ffffffff81b1d393>] x86_64_start_kernel+0xf0/0xf7
[   13.173009]
[   13.173009] -> #0 (&p->pi_lock){-.-.-.}:
[   13.173009]        [<ffffffff81067788>] check_prev_add+0x68/0x20e
[   13.173009]        [<ffffffff810679b9>] check_prevs_add+0x8b/0x104
[   13.173009]        [<ffffffff81067da1>] validate_chain+0x36f/0x3ab
[   13.173009]        [<ffffffff8106846b>] __lock_acquire+0x369/0x3e2
[   13.173009]        [<ffffffff81068a0f>] lock_acquire+0xfc/0x14c
[   13.173009]        [<ffffffff815698ea>] _raw_spin_lock_irqsave+0x44/0x57
[   13.173009]        [<ffffffff81032d8f>] try_to_wake_up+0x29/0x1aa
[   13.173009]        [<ffffffff81032f3c>] wake_up_process+0x10/0x12
[   13.173009]        [<ffffffff810901e9>] rcu_cpu_kthread_timer+0x44/0x58
[   13.173009]        [<ffffffff81045286>] call_timer_fn+0xac/0x1e9
[   13.173009]        [<ffffffff8104556d>] run_timer_softirq+0x1aa/0x1f2
[   13.173009]        [<ffffffff8103e487>] __do_softirq+0x109/0x26a
[   13.173009]        [<ffffffff8157144c>] call_softirq+0x1c/0x30
[   13.173009]        [<ffffffff81003207>] do_softirq+0x44/0xf1
[   13.173009]        [<ffffffff8103e8b9>] irq_exit+0x58/0xc8
[   13.173009]        [<ffffffff81017f5a>] smp_apic_timer_interrupt+0x79/0x87
[   13.173009]        [<ffffffff81570fd3>] apic_timer_interrupt+0x13/0x20
[   13.173009]        [<ffffffff810bd51a>] get_page_from_freelist+0x2aa/0x310
[   13.173009]        [<ffffffff810bdf03>] __alloc_pages_nodemask+0x178/0x243
[   13.173009]        [<ffffffff8101fe2f>] pte_alloc_one+0x1e/0x3a
[   13.173009]        [<ffffffff810d27fe>] __pte_alloc+0x22/0x14b
[   13.173009]        [<ffffffff810d48a8>] handle_mm_fault+0x17e/0x1e0
[   13.173009]        [<ffffffff8156cfee>] do_page_fault+0x42d/0x5de
[   13.173009]        [<ffffffff8156a75f>] page_fault+0x1f/0x30
[   13.173009]
[   13.173009] other info that might help us debug this:
[   13.173009]
[   13.173009] Chain exists of:
[   13.173009]   &p->pi_lock --> &rq->lock --> rcu_node_level_0
[   13.173009]
[   13.173009]  Possible unsafe locking scenario:
[   13.173009]
[   13.173009]        CPU0                    CPU1
[   13.173009]        ----                    ----
[   13.173009]   lock(rcu_node_level_0);
[   13.173009]                                lock(&rq->lock);
[   13.173009]                                lock(rcu_node_level_0);
[   13.173009]   lock(&p->pi_lock);
[   13.173009]
[   13.173009]  *** DEADLOCK ***
[   13.173009]
[   13.173009] 3 locks held by blkid/267:
[   13.173009]  #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff8156cdb4>] do_page_fault+0x1f3/0x5de
[   13.173009]  #1:  (&yield_timer){+.-...}, at: [<ffffffff810451da>] call_timer_fn+0x0/0x1e9
[   13.173009]  #2:  (rcu_node_level_0){..-...}, at: [<ffffffff810901cc>] rcu_cpu_kthread_timer+0x27/0x58
[   13.173009]
[   13.173009] stack backtrace:
[   13.173009] Pid: 267, comm: blkid Not tainted 2.6.39-rc6-mmotm0506 #1
[   13.173009] Call Trace:
[   13.173009]  <IRQ>  [<ffffffff8154a529>] print_circular_bug+0xc8/0xd9
[   13.173009]  [<ffffffff81067788>] check_prev_add+0x68/0x20e
[   13.173009]  [<ffffffff8100c861>] ? save_stack_trace+0x28/0x46
[   13.173009]  [<ffffffff810679b9>] check_prevs_add+0x8b/0x104
[   13.173009]  [<ffffffff81067da1>] validate_chain+0x36f/0x3ab
[   13.173009]  [<ffffffff8106846b>] __lock_acquire+0x369/0x3e2
[   13.173009]  [<ffffffff81032d8f>] ? try_to_wake_up+0x29/0x1aa
[   13.173009]  [<ffffffff81068a0f>] lock_acquire+0xfc/0x14c
[   13.173009]  [<ffffffff81032d8f>] ? try_to_wake_up+0x29/0x1aa
[   13.173009]  [<ffffffff810901a5>] ? rcu_check_quiescent_state+0x82/0x82
[   13.173009]  [<ffffffff815698ea>] _raw_spin_lock_irqsave+0x44/0x57
[   13.173009]  [<ffffffff81032d8f>] ? try_to_wake_up+0x29/0x1aa
[   13.173009]  [<ffffffff81032d8f>] try_to_wake_up+0x29/0x1aa
[   13.173009]  [<ffffffff810901a5>] ? rcu_check_quiescent_state+0x82/0x82
[   13.173009]  [<ffffffff81032f3c>] wake_up_process+0x10/0x12
[   13.173009]  [<ffffffff810901e9>] rcu_cpu_kthread_timer+0x44/0x58
[   13.173009]  [<ffffffff810901a5>] ? rcu_check_quiescent_state+0x82/0x82
[   13.173009]  [<ffffffff81045286>] call_timer_fn+0xac/0x1e9
[   13.173009]  [<ffffffff810451da>] ? del_timer+0x75/0x75
[   13.173009]  [<ffffffff810901a5>] ? rcu_check_quiescent_state+0x82/0x82
[   13.173009]  [<ffffffff8104556d>] run_timer_softirq+0x1aa/0x1f2
[   13.173009]  [<ffffffff8103e487>] __do_softirq+0x109/0x26a
[   13.173009]  [<ffffffff8106365f>] ? tick_dev_program_event+0x37/0xf6
[   13.173009]  [<ffffffff810a0e4a>] ? time_hardirqs_off+0x1b/0x2f
[   13.173009]  [<ffffffff8157144c>] call_softirq+0x1c/0x30
[   13.173009]  [<ffffffff81003207>] do_softirq+0x44/0xf1
[   13.173009]  [<ffffffff8103e8b9>] irq_exit+0x58/0xc8
[   13.173009]  [<ffffffff81017f5a>] smp_apic_timer_interrupt+0x79/0x87
[   13.173009]  [<ffffffff81570fd3>] apic_timer_interrupt+0x13/0x20
[   13.173009]  <EOI>  [<ffffffff810bd384>] ? get_page_from_freelist+0x114/0x310
[   13.173009]  [<ffffffff810bd51a>] ? get_page_from_freelist+0x2aa/0x310
[   13.173009]  [<ffffffff812220e7>] ? clear_page_c+0x7/0x10
[   13.173009]  [<ffffffff810bd1ef>] ? prep_new_page+0x14c/0x1cd
[   13.173009]  [<ffffffff810bd51a>] get_page_from_freelist+0x2aa/0x310
[   13.173009]  [<ffffffff810bdf03>] __alloc_pages_nodemask+0x178/0x243
[   13.173009]  [<ffffffff810d46b9>] ? __pmd_alloc+0x87/0x99
[   13.173009]  [<ffffffff8101fe2f>] pte_alloc_one+0x1e/0x3a
[   13.173009]  [<ffffffff810d46b9>] ? __pmd_alloc+0x87/0x99
[   13.173009]  [<ffffffff810d27fe>] __pte_alloc+0x22/0x14b
[   13.173009]  [<ffffffff810d48a8>] handle_mm_fault+0x17e/0x1e0
[   13.173009]  [<ffffffff8156cfee>] do_page_fault+0x42d/0x5de
[   13.173009]  [<ffffffff810d915f>] ? sys_brk+0x32/0x10c
[   13.173009]  [<ffffffff810a0e4a>] ? time_hardirqs_off+0x1b/0x2f
[   13.173009]  [<ffffffff81065c4f>] ? trace_hardirqs_off_caller+0x3f/0x9c
[   13.173009]  [<ffffffff812235dd>] ? trace_hardirqs_off_thunk+0x3a/0x3c
[   13.173009]  [<ffffffff8156a75f>] page_fault+0x1f/0x30
[   14.010075] usb 5-1: new full speed USB device number 2 using uhci_hcd
Reported-by: NValdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

An atomic_or() function is needed by TREE_RCU to avoid deadlock, so
add a generic version.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/urgent

Vince noticed that unless we mmap() a buffer, SIGIO gets lost. So
explicitly push the wakeup (including signals) when requested.
Reported-by: NVince Weaver <vweaver1@eecs.utk.edu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/n/tip-2euus3f3x3dyvdk52cjxw8zu@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Explain what the trailing "/1" on some lock class names of
lock_stat output means.
Reviewed-by: NYong Zhang <yong.zhang0@gmail.com>
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4DD4F6C1.5090701@gmail.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

The rule is, we have to update tsk->rt.nr_cpus_allowed if we change
tsk->cpus_allowed. Otherwise RT scheduler may confuse.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4DD4B3FA.5060901@jp.fujitsu.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Dima Zavin <dima@android.com> reported:

"After pulling the thread off the run-queue during a cgroup change,
the cfs_rq.min_vruntime gets recalculated. The dequeued thread's vruntime
then gets normalized to this new value. This can then lead to the thread
getting an unfair boost in the new group if the vruntime of the next
task in the old run-queue was way further ahead."
Reported-by: NDima Zavin <dima@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Recalls-having-tested-once-upon-a-time-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1305674470-23727-1-git-send-email-john.stultz@linaro.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Marc reported that e4a52bcb (sched: Remove rq->lock from the first
half of ttwu()) broke his ARM-SMP machine. Now ARM is one of the few
__ARCH_WANT_INTERRUPTS_ON_CTXSW users, so that exception in the ttwu()
code was suspect.

Yong found that the interrupt could hit after context_switch() changes
current but before it clears p->on_cpu, if that interrupt were to
attempt a wake-up of p we would indeed find ourselves spinning in IRQ
context.

Fix this by reverting to the old behaviour for this situation and
perform a full remote wake-up.

Cc: Frank Rowand <frank.rowand@am.sony.com>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reported-by: NMarc Zyngier <Marc.Zyngier@arm.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

sched_domain iterations needs to be protected by rcu_read_lock() now,
this patch adds another two places which needs the rcu lock, which is
spotted by following suspicious rcu_dereference_check() usage warnings.

kernel/sched_rt.c:1244 invoked rcu_dereference_check() without protection!
kernel/sched_stats.h:41 invoked rcu_dereference_check() without protection!
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1303469634-11678-1-git-send-email-dfeng@redhat.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NLiam Girdwood <lrg@ti.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

With the addition of a device platform mfd_cell pointer, MFD drivers
can go back to passing platform data back to their sub drivers.
This allows for an mfd_cell->mfd_data removal and thus keep the
sub drivers MFD agnostic. This is mostly needed for non MFD aware
sub drivers.
Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Merge branch 'for_2.6.40/gpio-move' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next

For filesystems such as nilfs2 and xfs that use block_page_mkwrite, modify that
function to wait for pending writeback before allowing the page to become
writable.  This is needed to stabilize pages during writeback for those two
filesystems.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When grabbing a page for a buffered IO write, the mm should wait for writeback
on the page to complete so that the page does not become writable during the IO
operation.  This change is needed to provide page stability during writes for
all filesystems.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

configfs does not have problems with references to unlinked directories.

CC: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

fat does not have problems with references to unlinked directories.

CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Hpfs has no problems with references to unlinked directories.

We leave one dentry_unhash call in place, in hpfs_unlink's strange path
where it tries to truncate a file because the disk is full.  I'm not sure
what the full story is there.

CC: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Minix has no issues with references to unlinked directories.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Fuse has no problems with references to unlinked directories.

CC: Miklos Szeredi <miklos@szeredi.hu>
CC: fuse-devel@lists.sourceforge.net
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Coda has no problems with references to unlinked directories.

CC: Jan Harkes <jaharkes@cs.cmu.edu>
CC: coda@cs.cmu.edu
CC: codalist@coda.cs.cmu.edu
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

afs has no problems with references to unlinked directories.

CC: David Howells <dhowells@redhat.com>
CC: linux-afs@lists.infradead.org
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

affs has no problems with references to unlinked directories.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

9p has no problems with references to unlinked directories.

CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

ncpfs does not handle references to unlinked directories (or so it would
seem given the ncp_rmdir check).  Since it is also possible to rename over
an empty directory, perform the same check here.

CC: Petr Vandrovec <petr@vandrovec.name>
CC: linux-kernel@vger.kernel.org
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>