The hardware has enums for altering the Cr and Cb order,
so use this instead of having a flag which swaps the
order the pointers are presented to the hardware
(that only worked for 3 plane formats anyway).

Explicitly sets .pixel_order in each case, rather than
relying on then default XYCBCR order being a value 0.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/563872b69c1e5df142cb15ebfca7f20056b8a64c.1510841336.git.dave.stevenson@raspberrypi.org

Filling out the list of supported formats based on those the
hardware can support.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/b551205d1c33fa49eef2c33ed2d60c5339b2f299.1510841336.git.dave.stevenson@raspberrypi.org

drm_plane_helper_check_update() isn't a transitional helper, so let's
rename it to drm_atomic_helper_check_plane_state() and move it into
drm_atomic_helper.c.

v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc

Cc: Daniel Vetter <daniel@ffwll.ch>
Suggested-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201619.6175-1-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drm_plane_helper_check_state() is supposed to do things the atomic way,
so it should not be inspecting crtc->enabled. Rather we should be
looking at crtc_state->enable.

We have a slight complication due to drm_plane_helper_check_update()
reusing drm_plane_helper_check_state() for non-atomic drivers. Thus
we'll have to pass the crtc_state in manally and construct a fake
crtc_state in drm_plane_helper_check_update().

v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201558.6059-1-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Try to fix the code to actually clip the plane to the crtc bounds
instead of the user provided crtc coordinates (which would be a no-op
since those are exactly the coordinates before clipping).

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101182920.14386-4-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

Atomic drivers have no reason to use drm_plane_helper_check_update()
instead of drm_plane_helper_check_state(). So let's switch over.

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101182920.14386-3-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

Throw away the bugs crtc coords vs. fb size check. Crtc coords don't
define the viewport inside the fb, that's a job for the src coords,
which have been checked by the core already.

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101182920.14386-2-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

There is no need to #define the license of the driver, just put it in
the MODULE_LICENSE() line directly as a text string.

This allows tools that check that the module license matches the source
code license to work properly, as there is no need to unwind the
unneeded dereference, especially when the string is defined in a .h file
far away from the .c file it is used in.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Reported-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117141632.GA17880@kroah.com

The i2c adapter on DP AUX is purely a software construct. Linking
it to the device node of the parent device is wrong, as it leads to
2 devices sharing the same device node, which is bad practice, as
well as the i2c trying to populate children of the i2c adapter by
looking at the child device nodes of the parent device.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170113173630.22138-1-l.stach@pengutronix.de

The Mitsubishi AA070MC01 is a 7.0" WVGA (800x480) TFT panel working in
8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).
Signed-off-by: NLukasz Majewski <lukma@denx.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508537917-1723-1-git-send-email-lukma@denx.de

The Tianma TM070RVHG71 is a 7" WVGA (800x480) TFT LCD panel connected
via LVDS and can be supported by the simple-panel binding.
Signed-off-by: NLukasz Majewski <lukma@denx.de>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107153058.5554-1-lukma@denx.de

If the sink device is in HDMI mode, enable infoframe interrupt in scdt
irq handle function else call start_video function immediately, because
in DVI mode, there is no infoframe interrupt provided.

Rename start_hdmi function to start_video and get rid of the old
start_video function. In start_video, if the sink is DVI and mode is
MHL1 or MHl2, write appropriate values to registers else the path
should remain the same as in HDMI mode.
Signed-off-by: NMaciej Purski <m.purski@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510224822-7732-1-git-send-email-m.purski@samsung.com

The maximum pixel clock depends on the version of the connected MHL
adapter. Add mode_valid callback to filter out modes with too high pixel
clock to avoid failure in mode_fixup later.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109102831.19844-1-m.szyprowski@samsung.com

RK3126 vop register layout is similar with rk3036, so some feature
can reuse with rk3036.

RK3126 support two overlay plane and one hwc plane, max output
resolution is 1080p. it support IOMMU, and its IOMMU same as
rk3288's
Signed-off-by: NSandy Huang <hjc@rock-chips.com>
Reviewed-by: NMark Yao <mark.yao@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510658857-90299-1-git-send-email-hjc@rock-chips.com

Signed-off-by: NSandy Huang <hjc@rock-chips.com>
Acked-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1510658855-90223-1-git-send-email-hjc@rock-chips.com

drm_gem_cma_prime_import_sg_table() will fail if the number of entries
in the sg_table > 1. However, you can have a device that uses an IOMMU
engine and can map a discontiguous buffer with multiple entries that
have consecutive sg_dma_addresses, effectively making it contiguous.
Allow for that scenario by testing the entries in the sg_table for
contiguous coverage.
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NLiviu Dudau <liviu.dudau@arm.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110133310.1225-1-Liviu.Dudau@arm.com

It's useful for syncing async connector work like link retraining.

v2: Make it work (Manasi&Ville)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110105313.16718-1-daniel.vetter@ffwll.ch

Add the missing kerneldoc for modifiers and modifier_count.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191021.15591-3-ville.syrjala@linux.intel.comReviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Use the correct name for the function argument in the docs.

Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191021.15591-1-ville.syrjala@linux.intel.comAcked-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

The member is called 'modifiers_property' instead of 'modifiers'. Adjust
the kernel docs to match.

Cc: dri-devel@lists.freedesktop.org
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-11-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The amdgpu issue to also need signaled fences in the reservation objects should
be fixed by now.

Optimize the handling by replacing a signaled fence when adding a new
shared one.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114142436.1360-2-christian.koenig@amd.com

The amdgpu issue to also need signaled fences in the reservation objects
should be fixed by now.

Optimize the list by keeping only the not signaled yet fences around.

v2: temporary put the signaled fences at the end of the new container
v3: put the old fence at the end of the new container as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114142436.1360-1-christian.koenig@amd.com

The introduction of: drm/framebuffer: Add framebuffer debugfs file
broke vgem. That patch assumed that all drivers had initialized the
dev->mode_config.fb_lock mutex which happens in drm_mode_config_init().
vgem doesn't need to call drm_mode_config_init().

Fix this by only creating the framebuffer debugfs file for modesetting
drivers.

Fixes: 45d58b40 ("drm/framebuffer: Add framebuffer debugfs file")
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113231201.26177-1-noralf@tronnes.org

That's the only wrapper function missing and necessary to cleanup TTM.
Reviewed-and-Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109085909.1653-3-christian.koenig@amd.com

drm_fb_cma_debugfs_show() and drm_gem_cma_describe() are superseded
by drm_framebuffer_debugfs_init() and drm_gem_cma_print_info().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-13-noralf@tronnes.org

There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer

Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-12-noralf@tronnes.org

There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer

Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NJyri Sarha <jsarha@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-11-noralf@tronnes.org

There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer

Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NLiviu Dudau <liviu.dudau@arm.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-10-noralf@tronnes.org

There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer

Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NAlexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-9-noralf@tronnes.org

Add drm_gem_cma_print_info() for debugfs printing
struct drm_gem_cma_object specific info.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-8-noralf@tronnes.org

This allows the argument to be a const.

The other option was to keep it an inline function and make the argument
a const:

static inline struct drm_gem_cma_object *
to_drm_gem_cma_obj(const struct drm_gem_object *gem_obj)
{
	return container_of(gem_obj, struct drm_gem_cma_object, base);
}

This will happily return a non-const pointer to the drm_gem_cma_object
based on a const pointer to the contained drm_gem_object, thus creating
const-safety problems.

There was an attempt to fix the problem in the container_of() macro
itself (see https://lkml.org/lkml/2017/5/19/381) but the patch seems to
have fallen through the cracks. It would require turning this inline
function into a macro.

By making this a macro now, we will benefit from a possible future
enhancement of container_of(). We don't loose type checking by doing
this, container_of() takes care of that.
Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-7-noralf@tronnes.org

Use drm_framebuffer_print_info() to print framebuffer info in
drm_atomic_plane_print_state(). This will give optional GEM info as well.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-6-noralf@tronnes.org

Add debugfs file that dumps info about the framebuffers and its planes.
Also dump info about any connected gem object(s).
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-5-noralf@tronnes.org

Add drm_printf_indent() that adds tab indentation according to argument.
Indentation overflow is marked with an X.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-4-noralf@tronnes.org

Constify argument so functions calling into this take a const argument.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-3-noralf@tronnes.org

Constify argument so functions calling into this take a const argument.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-2-noralf@tronnes.org

Remove redundant task name copying because:

1. task->comm is already NUL-terminated
2. virtio_gpu_context_create() trims passed dbgname anyway
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Link: http://patchwork.freedesktop.org/patch/msgid/588612bbc672e8b598e10f79fcbc041122e844ba.1504202471.git.mirq-linux@rere.qmqm.plSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Simply mmap'ing /dev/dri/card0 repeatedly will spam the kernel
log with qxl_mmap information messages. The following example code
illustrates this:

int main(void)
{
	int fd = open("/dev/dri/card0", O_RDONLY);
	if (fd == -1)
		err(1, "open failed");

	for (;;) {
		void *m = mmap(NULL, 4096, PROT_READ,
			MAP_SHARED, fd, 0);
		if (m != MAP_FAILED)
			munmap(m, 4096);
	}
}

Stop the spamming by removing the pr_info message. Since the mmap'ing
returns -EINVAL there is no need for the pr_info message.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170912173422.14062-1-colin.king@canonical.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add create_handle support to cirrus fb. Without this, screenshot tool
in chromium OS can't work.
Signed-off-by: NLepton Wu <ytht.net@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20171108185537.56167-1-ytht.net@gmail.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add create_handle support to virtio fb. Without this, screenshot tool
in chromium OS can't work.
Signed-off-by: NLepton Wu <ytht.net@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20171108184209.46211-1-ytht.net@gmail.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>