Replace wlan_min() with the generic min_t(), remove unused wlan_max().
Signed-off-by: NMoritz Muehlenhoff <jmm@debian.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replace WLAN_LOG_INFO with printk() and remove it.
Signed-off-by: NMoritz Muehlenhoff <jmm@debian.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMoritz Muehlenhoff <jmm@debian.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMoritz Muehlenhoff <jmm@debian.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes the ieee2host16(), ieee2host32(), host2ieee16()
and host2ieee32() macros and replaces them with the generic ones.
Signed-off-by: NMoritz Muehlenhoff <jmm@debian.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove the ugly DBFENTER/DBFEXIT macros, which are only inserted to add "<---" and
"--->" at the function start/end at higher debug levels and which make the code
a lot less readable.
Signed-off-by: NMoritz Muehlenhoff <jmm@debian.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move version identifier into p80211netdev.h and rename it to 0.3.0-staging
to differentiate from the out-of-tree version.

Also remove the unused wlan_ethconv declaration.
Signed-off-by: NMoritz Muehlenhoff <jmm@debian.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The header files contain a few comments, which describe the
function of the header element. Remove them where not needed.
Signed-off-by: NMoritz Muehlenhoff <jmm@debian.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replace the driver local WLAN_ADDR_LEN constant through the kernel-wide ETH_ALEN definiton.
Signed-off-by: NMoritz Muehlenhoff <jmm@debian.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replace all ocurrances of the __WLAN_ATTRIB_PACK__ from wlan_compat.h
by __attribute__((packed)) and remove it afterwards.
Signed-off-by: NMoritz Muehlenhoff <jmm@debian.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The gl_80211.h header file contains only two definitions that are actually
used. Move them to mds_s.h and remove the otherwise unused file.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The ds_tkip.h header file contains declarations of a function that is not
actually defined anywhere.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPavel Machek <pavel@ucw.cz>

The bssdscpt.h header file contains definitions that are not actually used for
anything.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As this typedef is used everywhere in the driver, remove it in a separate
patch.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes some typedefs from the driver code. I also removed some
unused structs I spotted while removing the typedefs.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The only remaining thing in common.h header file is the WBDEBUG() macro which
is unconditionally defined as printk(). Kill the macro and remove the header
file.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The DebugUsbdStatusInformation macro doesn't do anything useful so remove the
definition and the two users of it from driver code.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As suggested by Harvey Harrison, convert driver to use ETH_ALEN and kill a
private macro from common.h that is used for the same thing.
Acked-by: NHarvey Harrison <harvey.harrison@gmail.com>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No need to keep function definitions separate from the rest so unify mto.h and
mto_f.h header files.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I have no idea why the driver would want to include OpenGL headers in the first
place but lets just remove the crazy includes.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert code to include sysdef.h directly and remove unnecessary os_common.h
header file.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The header files are not included anywhere so we can just remove them.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes some errors reported by checkpatch.pl
Signed-off-by: NAndre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAndre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

fix the following error reported by checkpatch.pl
ERROR: trailing statements should be on next line
Signed-off-by: NAndre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

fix the following error reported by checkpatch.pl
ERROR: do not initialise statics to 0 or NULL
Signed-off-by: NAndre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAndre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support for downloading the firmware using kernel-builtin mechanism.
This will remove the need for the firmware files in the driver source code.
Signed-off-by: NChristopher Harrer <charrer@alacritech.com>
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add a watchdog timer to take care of link change notifications.
Link changes would now be handled asynchronously as they involve large delays.
Signed-off-by: NLinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix a softlock warning message thrown up by the rtnl_timer.
This was observed during the LTP tests (interface up/down test)
Signed-off-by: NLinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Read the correct MAC address from EEPROM/Flash.
Without this fix, all the interfaces were using the same MAC address.
This works on Rev B firmware.
Signed-off-by: NChristopher Harrer <charrer@alacritech.com>
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the problem of the interface not working after a sequence of up-down-up
events. The problem was observed only on systems where the card was using MSI-X
interrupts. On the second time open, the driver did not request MSI-X vector
but was trying to use normal interrupts.
Signed-off-by: NLinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* Update the module name in Kconfig help section.
  This is a classic case of documentation keeping out of pace with
  development
  And this was overlooked by me ages ago when we had fixed the Makefile for
  sxg_ethtool to compile.
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* The receive rings were getting allocated twice. Once at probe time
  and once at open time. This leaked huge amounts of memory.
  Fix this leak and now allocation is done only once.
Signed-off-by: NLinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* This patch adds support for controling checksum feature using the ethtool
  interface.
Signed-off-by: NLinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove the deprecated microcode which was for Rev A.
Now on the driver will use Rev B microcode only.
Signed-off-by: NMichael Miles <mmiles@alacritech.com>
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch makes the Sahara SXG driver use Rev B firmware instead of Rev A.
The firmware version is 1.71
Signed-off-by: NMichael Miles <mmiles@alacritech.com>
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the new firmware files required by Rev B cards.
Signed-off-by: NMichael Miles <mmiles@alacritech.com>
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* Fix a memory leak if allocation of skb fails in sxg_fill_descriptor_block.
  In sxg_fill_descriptor_block(), if allocation of skb failed in loop,
  we just came out shouting. This rollbacks all the successful operation
  before skb allocation fails and then returns.
Signed-off-by: NLinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>