- 21 12月, 2011 11 次提交
-
-
由 Ursula Braun 提交于
The NETIUCV device driver allows to connect a Linux guest on z/VM to another z/VM guest based on the z/VM communication facility IUCV. Multiple output paths to different guests are possible, as well as multiple input paths from different guests. With this feature, you can configure multiple point-to-point NETIUCV interfaces between your Linux on System z instance and another z/VM guest. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
A recovery does not make sense during shutdown and may even cause an error like this: qeth 0.0.f503: A recovery process has been started for the device Badness at drivers/s390/cio/qdio_main.c:1156 Modules linked in: autofs4 sunrpc dm_multipath scsi_dh scsi_mod qeth_l3 ipv6 vmu r qeth qdio ccwgroup ext3 jbd mbcache dasd_eckd_mod dasd_mod dm_mirror dm_region _hash dm_log dm_mod [last unloaded: scsi_wait_scan] CPU: 3 Not tainted 2.6.32-202.el6.s390x #1 Process qeth_recover (pid: 1498, task: 000000003efe2040, ksp: 000000003d5e3b80) Krnl PSW : 0404200180000000 000003c000be6da8 (qdio_int_handler+0x88/0x43c [qdio] ) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: ffffffffffff3bac 0000000000000005 0000000000000000 fffffffffffffff4 0000000000000000 000000000000000c 0000000000000000 000000003ca97000 0000000000000380 fffffffffffffff4 000000003f22d800 000000003f22c478 000003c000bdf000 000003c000bea270 000000003f447e10 000000003f447db0 Krnl Code: 000003c000be6d9a: c21f00000004 clfi %r1,4 000003c000be6da0: a7c40021 brc 12,3c000be6de2 000003c000be6da4: a7f40001 brc 15,3c000be6da6 >000003c000be6da8: e320a0080004 lg %r2,8(%r10) 000003c000be6dae: a7390003 lghi %r3,3 000003c000be6db2: a72b0178 aghi %r2,376 000003c000be6db6: a7490001 lghi %r4,1 000003c000be6dba: a7590000 lghi %r5,0 Call Trace: ([<000000000080ee80>] __per_cpu_offset+0x0/0x200) [<00000000003d90e8>] ccw_device_call_handler+0x70/0xcc [<00000000003d83a2>] ccw_device_irq+0x82/0x180 [<00000000003cc6a8>] do_IRQ+0x16c/0x1ec [<0000000000118abe>] io_return+0x0/0x8 [<000003c000d04c74>] qeth_determine_capabilities+0x208/0x5cc [qeth] ([<000003c000d04c4a>] qeth_determine_capabilities+0x1de/0x5cc [qeth]) [<000003c000d0a6e0>] qeth_core_hardsetup_card+0x160/0x1258 [qeth] [<000003c000f49f56>] __qeth_l3_set_online+0x132/0xb14 [qeth_l3] [<000003c000f4ac70>] qeth_l3_recover+0x168/0x224 [qeth_l3] [<000000000016e210>] kthread+0xa4/0xac [<0000000000109c6e>] kernel_thread_starter+0x6/0xc [<0000000000109c68>] kernel_thread_starter+0x0/0xc The patch forbids start of a recovery once qeth shutdown is running. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
qeth layer3 recovery invokes its set_multicast_list function, which invokes function __vlan_find_dev_deep requiring rcu_read_lock or rtnl lock. This causes kernel messages: kernel: [ INFO: suspicious rcu_dereference_check() usage. ] kernel: --------------------------------------------------- kernel: net/8021q/vlan_core.c:70 invoked rcu_dereference_check() without protection! kernel: stack backtrace: kernel: CPU: 0 Not tainted 3.1.0 #9 kernel: Process qeth_recover (pid: 2078, task: 000000007e584680, ksp: 000000007e3e3930) kernel: 000000007e3e3d08 000000007e3e3c88 0000000000000002 0000000000000000 kernel: 000000007e3e3d28 000000007e3e3ca0 000000007e3e3ca0 00000000005e77ce kernel: 0000000000000000 0000000000000001 ffffffffffffffff 0000000000000001 kernel: 000000000000000d 000000000000000c 000000007e3e3cf0 0000000000000000 kernel: 0000000000000000 0000000000100a18 000000007e3e3c88 000000007e3e3cc8 kernel: Call Trace: kernel: ([<0000000000100926>] show_trace+0xee/0x144) kernel: [<00000000005d395c>] __vlan_find_dev_deep+0xb0/0x108 kernel: [<00000000004acd3a>] qeth_l3_set_multicast_list+0x976/0xe38 kernel: [<00000000004ae0f4>] __qeth_l3_set_online+0x75c/0x1498 kernel: [<00000000004aefec>] qeth_l3_recover+0xc4/0x1d0 kernel: [<0000000000185372>] kthread+0xa6/0xb0 kernel: [<00000000005ed4c6>] kernel_thread_starter+0x6/0xc kernel: [<00000000005ed4c0>] kernel_thread_starter+0x0/0xc The patch makes sure the rtnl lock is held once qeth recovery invokes its set_multicast_list function. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
af_iucv differs unnecessarily between state IUCV_SEVERED and IUCV_DISCONN. This patch removes state IUCV_SEVERED. While simplifying af_iucv, this patch removes the 2nd invocation of cpcmd as well. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
af_iucv contains timer infrastructure which is not exploited. This patch removes the timer related code parts. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
For HiperSockets transport skbs sent are bound to one of the available HiperSockets devices. Add missing release of reference to a HiperSockets device before freeing an skb. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Closing an af_iucv socket may wait for confirmation of outstanding send requests. This patch adds confirmation code for the new HiperSockets transport. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
The AF_IUCV address family offers support for ancillary data. This patch enables usage of ancillary data with the new HiperSockets transport. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Krishna Kumar 提交于
It was reported that the macvtap device selects a Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
When UDP RSS is enabled, we use same QPN for TCP and UDP ranges The bug is that the default_qpn was used base UDP qpn before it was set. Fixes bug introduced in commit: 1202d460Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cyrill Gorcunov 提交于
Otherwise getting | net/unix/diag.c:312:16: error: expected declaration specifiers or ‘...’ before string constant | net/unix/diag.c:313:1: error: expected declaration specifiers or ‘...’ before string constant Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 12月, 2011 18 次提交
-
-
由 Rusty Russell 提交于
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. (Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false). Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rusty Russell 提交于
DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frederic LAMBERT 提交于
Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NFrederic Lambert <frdrc66@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjorn Helgaas 提交于
Replace open-coded list traversal with list_for_each_entry(). CC: Grant Grundler <grundler@parisc-linux.org> CC: netdev@vger.kernel.org Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjorn Helgaas 提交于
Replace open-coded list traversal with list_for_each_entry(). CC: David S. Miller <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We can use vzalloc() helper now instead of __vmalloc() trick Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds the ethtool callbacks necessary to change the rss indirection table from userspace. Should the number of interrupts change (e.g. across a close / open call, or through a reset) and any one of the indirection table values fall out-of-range, the driver will reset the indirection table to a default layout. [Integrated many suggestions made by Ben Hutchings.] Changes since v3 * Removed TG3_FLAG_SUPPORT_MSIX checks at the start of tg3_get_rxfh_indir() and tg3_set_rxfh_indir(). Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
bnx2-mips-06-6.2.3 and bnx2-mips-09-6.2.1.b New firmware fixes iSCSI problems with some LeftHand targets that don't set TTT=0xffffffff for Data-In according to spec. Firmware generates exception warnings for this condition and becomes very slow. This is fixed by suppressing these warnings when using default error mask. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Lancer does not have HW registers to indicate the EQ causing the INTx interrupt. As a result EQE entries of one EQ may be consumed when interrupt is caused by another EQ. Fix this by arming CQs at the end of NAPI poll routine to regenerate the EQEs. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vinson Lee 提交于
Signed-off-by: NVinson Lee <vlee@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit 5c3ddec7. S390 qeth driver actually still uses the setup ops. Reported-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
The communication channel is HW interface from PF point of view So the command return status should be stored as HW error code and only then translated to errno values. Reporetd-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
The function is always called from irq context, changing the call to spin_lock(). Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Guller 提交于
Solves an issue where we tried to free the same page twice after the port has been opened and closed. Signed-off-by: NAlexander Guller <alexg@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
New FW can give clues to driver regarding default port type and whether or not we should default to link sensing on the port. 2 bits are added to QUERY_PORT command: 1. suggested_type: This bit gives a hint whether the default port type should be IB or Ethernet. The driver will use this hint in case the user didn't specify explicitly the link layer type he wants to set. 2. default_sense: If this bit is set, we would sense the port type on start-up and default the port to link sensing Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
For ConnectX3 devices, we allow link sensing only if FW explicitly reported it supports the feature. For older versions (ConnectX1 and 2), if the card supports both link layer types (Ethenet and Infiniband), link sensing is supported. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
-
- 17 12月, 2011 11 次提交
-
-
由 Dan Carpenter 提交于
"result" isn't used. We ignore errors here because there is not much we can do about them. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Maravić 提交于
Use IS_ENABLED(CONFIG_FOO) instead of defined(CONFIG_FOO) || defined (CONFIG_FOO_MODULE) Signed-off-by: NIgor Maravić <igorm@etf.rs> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Maravić 提交于
Use IS_ENABLED(CONFIG_FOO) instead of defined(CONFIG_FOO) || defined (CONFIG_FOO_MODULE) Signed-off-by: NIgor Maravić <igorm@etf.rs> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Maravić 提交于
Use IS_ENABLED(CONFIG_FOO) instead of defined(CONFIG_FOO) || defined (CONFIG_FOO_MODULE) Signed-off-by: NIgor Maravić <igorm@etf.rs> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Maravić 提交于
Use IS_ENABLED(CONFIG_FOO) instead of defined(CONFIG_FOO) || defined (CONFIG_FOO_MODULE) Signed-off-by: NIgor Maravić <igorm@etf.rs> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In control path, its better to use GFP_KERNEL allocations where possible. Before taking qdisc spinlock, we preallocate memory just in case we'll need it in gred_change_vq() This is a followup to commit 3f1e6d3f (sch_gred: should not use GFP_KERNEL while holding a spinlock) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Glauber Costa 提交于
Reported-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NGlauber Costa <glommer@parallels.com> CC: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com> CC: David S. Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Glauber Costa 提交于
We can't scan the proto_list to initialize sock cgroups, as it holds a rwlock, and we also want to keep the code generic enough to avoid calling the initialization functions of protocols directly, Convert proto_list_lock into a mutex, so we can sleep and do the necessary allocations. This lock is seldom taken, so there shouldn't be any performance penalties associated with that Signed-off-by: NGlauber Costa <glommer@parallels.com> CC: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com> CC: David S. Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joerg Roedel 提交于
This patch fixes a compile error that occurs when the driver is compile into the kernel and not as a module. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-