1. 14 10月, 2015 1 次提交
    • C
      f2fs crypto: fix racing of accessing encrypted page among · 08b39fbd
      Chao Yu 提交于
       different competitors
      
      Since we use different page cache (normally inode's page cache for R/W
      and meta inode's page cache for GC) to cache the same physical block
      which is belong to an encrypted inode. Writeback of these two page
      cache should be exclusive, but now we didn't handle writeback state
      well, so there may be potential racing problem:
      
      a)
      kworker:				f2fs_gc:
       - f2fs_write_data_pages
        - f2fs_write_data_page
         - do_write_data_page
          - write_data_page
           - f2fs_submit_page_mbio
      (page#1 in inode's page cache was queued
      in f2fs bio cache, and be ready to write
      to new blkaddr)
      					 - gc_data_segment
      					  - move_encrypted_block
      					   - pagecache_get_page
      					(page#2 in meta inode's page cache
      					was cached with the invalid datas
      					of physical block located in new
      					blkaddr)
      					   - f2fs_submit_page_mbio
      					(page#1 was submitted, later, page#2
      					with invalid data will be submitted)
      
      b)
      f2fs_gc:
       - gc_data_segment
        - move_encrypted_block
         - f2fs_submit_page_mbio
      (page#1 in meta inode's page cache was
      queued in f2fs bio cache, and be ready
      to write to new blkaddr)
      					user thread:
      					 - f2fs_write_begin
      					  - f2fs_submit_page_bio
      					(we submit the request to block layer
      					to update page#2 in inode's page cache
      					with physical block located in new
      					blkaddr, so here we may read gabbage
      					data from new blkaddr since GC hasn't
      					writebacked the page#1 yet)
      
      This patch fixes above potential racing problem for encrypted inode.
      Signed-off-by: NChao Yu <chao2.yu@samsung.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      08b39fbd
  2. 13 10月, 2015 3 次提交
  3. 10 10月, 2015 7 次提交
  4. 27 8月, 2015 1 次提交
    • C
      f2fs: update extent tree in batches · 19b2c30d
      Chao Yu 提交于
      This patch introduce a new helper f2fs_update_extent_tree_range which can
      do extent mapping update at a specified range.
      
      The main idea is:
      1) punch all mapping info in extent node(s) which are at a specified range;
      2) try to merge new extent mapping with adjacent node, or failing that,
         insert the mapping into extent tree as a new node.
      
      In order to see the benefit, I add a function for stating time stamping
      count as below:
      
      uint64_t rdtsc(void)
      {
      	uint32_t lo, hi;
      	__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
      	return (uint64_t)hi << 32 | lo;
      }
      
      My test environment is: ubuntu, intel i7-3770, 16G memory, 256g micron ssd.
      
      truncation path:	update extent cache from truncate_data_blocks_range
      non-truncataion path:	update extent cache from other paths
      total:			all update paths
      
      a) Removing 128MB file which has one extent node mapping whole range of
      file:
      1. dd if=/dev/zero of=/mnt/f2fs/128M bs=1M count=128
      2. sync
      3. rm /mnt/f2fs/128M
      
      Before:
      		total		count		average
      truncation:	7651022		32768		233.49
      
      Patched:
      		total		count		average
      truncation:	3321		33		100.64
      
      b) fsstress:
      fsstress -d /mnt/f2fs -l 5 -n 100 -p 20
      Test times:		5 times.
      
      Before:
      		total		count		average
      truncation:	5812480.6	20911.6		277.95
      non-truncation:	7783845.6	13440.8		579.12
      total:		13596326.2	34352.4		395.79
      
      Patched:
      		total		count		average
      truncation:	1281283.0	3041.6		421.25
      non-truncation:	7355844.4	13662.8		538.38
      total:		8637127.4	16704.4		517.06
      
      1) For the updates in truncation path:
       - we can see updating in batches leads total tsc and update count reducing
         explicitly;
       - besides, for a single batched updating, punching multiple extent nodes
         in a loop, result in executing more operations, so our average tsc
         increase intensively.
      2) For the updates in non-truncation path:
       - there is a little improvement, that is because for the scenario that we
         just need to update in the head or tail of extent node, new interface
         optimize to update info in extent node directly, rather than removing
         original extent node for updating and then inserting that updated one
         into cache as new node.
      Signed-off-by: NChao Yu <chao2.yu@samsung.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      19b2c30d
  5. 25 8月, 2015 1 次提交
  6. 21 8月, 2015 1 次提交
  7. 11 8月, 2015 1 次提交
  8. 05 8月, 2015 8 次提交
  9. 25 7月, 2015 1 次提交
    • J
      f2fs: call set_page_dirty to attach i_wb for cgroup · 6282adbf
      Jaegeuk Kim 提交于
      The cgroup attaches inode->i_wb via mark_inode_dirty and when set_page_writeback
      is called, __inc_wb_stat() updates i_wb's stat.
      
      So, we need to explicitly call set_page_dirty->__mark_inode_dirty in prior to
      any writebacking pages.
      
      This patch should resolve the following kernel panic reported by Andreas Reis.
      
      https://bugzilla.kernel.org/show_bug.cgi?id=101801
      
      --- Comment #2 from Andreas Reis <andreas.reis@gmail.com> ---
      BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
      IP: [<ffffffff8149deea>] __percpu_counter_add+0x1a/0x90
      PGD 2951ff067 PUD 2df43f067 PMD 0
      Oops: 0000 [#1] PREEMPT SMP
      Modules linked in:
      CPU: 7 PID: 10356 Comm: gcc Tainted: G        W       4.2.0-1-cu #1
      Hardware name: Gigabyte Technology Co., Ltd. G1.Sniper M5/G1.Sniper M5, BIOS
      T01 02/03/2015
      task: ffff880295044f80 ti: ffff880295140000 task.ti: ffff880295140000
      RIP: 0010:[<ffffffff8149deea>]  [<ffffffff8149deea>]
      __percpu_counter_add+0x1a/0x90
      RSP: 0018:ffff880295143ac8  EFLAGS: 00010082
      RAX: 0000000000000003 RBX: ffffea000a526d40 RCX: 0000000000000001
      RDX: 0000000000000020 RSI: 0000000000000001 RDI: 0000000000000088
      RBP: ffff880295143ae8 R08: 0000000000000000 R09: ffff88008f69bb30
      R10: 00000000fffffffa R11: 0000000000000000 R12: 0000000000000088
      R13: 0000000000000001 R14: ffff88041d099000 R15: ffff880084a205d0
      FS:  00007f8549374700(0000) GS:ffff88042f3c0000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: 00000000000000a8 CR3: 000000033e1d5000 CR4: 00000000001406e0
      DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      Stack:
       0000000000000000 ffffea000a526d40 ffff880084a20738 ffff880084a20750
       ffff880295143b48 ffffffff811cc91e ffff880000000000 0000000000000296
       0000000000000000 ffff880417090198 0000000000000000 ffffea000a526d40
      Call Trace:
       [<ffffffff811cc91e>] __test_set_page_writeback+0xde/0x1d0
       [<ffffffff813fee87>] do_write_data_page+0xe7/0x3a0
       [<ffffffff813faeea>] gc_data_segment+0x5aa/0x640
       [<ffffffff813fb0b8>] do_garbage_collect+0x138/0x150
       [<ffffffff813fb3fe>] f2fs_gc+0x1be/0x3e0
       [<ffffffff81405541>] f2fs_balance_fs+0x81/0x90
       [<ffffffff813ee357>] f2fs_unlink+0x47/0x1d0
       [<ffffffff81239329>] vfs_unlink+0x109/0x1b0
       [<ffffffff8123e3d7>] do_unlinkat+0x287/0x2c0
       [<ffffffff8123ebc6>] SyS_unlink+0x16/0x20
       [<ffffffff81942e2e>] entry_SYSCALL_64_fastpath+0x12/0x71
      Code: 41 5e 5d c3 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 55 49
      89 f5 41 54 49 89 fc 53 48 83 ec 08 65 ff 05 e6 d9 b6 7e <48> 8b 47 20 48 63 ca
      65 8b 18 48 63 db 48 01 f3 48 39 cb 7d 0a
      RIP  [<ffffffff8149deea>] __percpu_counter_add+0x1a/0x90
       RSP <ffff880295143ac8>
      CR2: 00000000000000a8
      ---[ end trace 5132449a58ed93a3 ]---
      note: gcc[10356] exited with preempt_count 2
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      6282adbf
  10. 12 6月, 2015 1 次提交
    • C
      f2fs: do not trim preallocated blocks when truncating after i_size · 3c454145
      Chao Yu 提交于
      When we perform generic/092 in xfstests, output is like below:
      
           XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
           0: [0..10239]: data
           0: [0..10239]: data
          -1: [10240..20479]: unwritten
          +1: [10240..14335]: unwritten
      
      This is because with this testcase, we redefine the regulation for
      truncate in perallocated space past i_size as below:
      
      "There was some confused about what the fs was supposed to do when you
      truncate at i_size with preallocated space past i_size. We decided on the
      following things.
      
      1) truncate(i_size) will trim all blocks past i_size.
      2) truncate(x) where x > i_size will not trim all blocks past i_size.
      "
      
      This method is used in xfs, and then ext4/btrfs will follow the rule.
      
      This patch fixes to follow the new rule for f2fs.
      Signed-off-by: NChao Yu <chao2.yu@samsung.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      3c454145
  11. 10 6月, 2015 1 次提交
  12. 09 6月, 2015 1 次提交
  13. 03 6月, 2015 2 次提交
    • C
      f2fs: support FALLOC_FL_INSERT_RANGE · f62185d0
      Chao Yu 提交于
      FALLOC_FL_INSERT_RANGE flag for ->fallocate was introduced in commit
      dd46c787 ("fs: Add support FALLOC_FL_INSERT_RANGE for fallocate").
      
      The effect of FALLOC_FL_INSERT_RANGE command is the opposite of
      FALLOC_FL_COLLAPSE_RANGE, if this command was performed, all data from
      offset to EOF in our file will be shifted to right as given length, and
      then range [offset, offset + length] becomes a hole.
      
      This command is useful for our user who wants to add some data in the
      middle of the file, for example: video/music editor will insert a keyframe
      in specified position of media file, with this command we can easily create
      a hole for inserting without removing original data.
      
      This patch introduces f2fs_insert_range() to support FALLOC_FL_INSERT_RANGE.
      Signed-off-by: NChao Yu <chao2.yu@samsung.com>
      Signed-off-by: NYuan Zhong <yuan.mark.zhong@samsung.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      f62185d0
    • C
      f2fs: hide common code in f2fs_replace_block · 528e3459
      Chao Yu 提交于
      This patch clean up codes through:
      1.rename f2fs_replace_block to __f2fs_replace_block().
      2.introduce new f2fs_replace_block() to include __f2fs_replace_block()
      and some common related codes around __f2fs_replace_block().
      
      Then, newly introduced function f2fs_replace_block can be used by
      following patch.
      Signed-off-by: NChao Yu <chao2.yu@samsung.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      528e3459
  14. 02 6月, 2015 1 次提交
  15. 29 5月, 2015 9 次提交
    • J
      f2fs crypto: add filename encryption for roll-forward recovery · e7d55452
      Jaegeuk Kim 提交于
      This patch adds a bit flag to indicate whether or not i_name in the inode
      is encrypted.
      
      If this name is encrypted, we can't do recover_dentry during roll-forward.
      So, f2fs_sync_file() needs to do checkpoint, if this will be needed in future.
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      e7d55452
    • J
      f2fs crypto: add encryption support in read/write paths · 4375a336
      Jaegeuk Kim 提交于
      This patch adds encryption support in read and write paths.
      
      Note that, in f2fs, we need to consider cleaning operation.
      In cleaning procedure, we must avoid encrypting and decrypting written blocks.
      So, this patch implements move_encrypted_block().
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      4375a336
    • J
      f2fs crypto: activate encryption support for fs APIs · fcc85a4d
      Jaegeuk Kim 提交于
      This patch activates the following APIs for encryption support.
      
      The rules quoted by ext4 are:
       - An unencrypted directory may contain encrypted or unencrypted files
         or directories.
       - All files or directories in a directory must be protected using the
         same key as their containing directory.
       - Encrypted inode for regular file should not have inline_data.
       - Encrypted symlink and directory may have inline_data and inline_dentry.
      
      This patch activates the following APIs.
      1. f2fs_link              : validate context
      2. f2fs_lookup            :      ''
      3. f2fs_rename            :      ''
      4. f2fs_create/f2fs_mkdir : inherit its dir's context
      5. f2fs_direct_IO         : do buffered io for regular files
      6. f2fs_open              : check encryption info
      7. f2fs_file_mmap         :      ''
      8. f2fs_setattr           :      ''
      9. f2fs_file_write_iter   :      ''           (Called by sys_io_submit)
      10. f2fs_fallocate        : do not support fcollapse
      11. f2fs_evict_inode      : free_encryption_info
      Signed-off-by: NMichael Halcrow <mhalcrow@google.com>
      Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      fcc85a4d
    • J
      f2fs crypto: add encryption policy and password salt support · f424f664
      Jaegeuk Kim 提交于
      This patch adds encryption policy and password salt support through ioctl
      implementation.
      
      It adds three ioctls:
       F2FS_IOC_SET_ENCRYPTION_POLICY,
       F2FS_IOC_GET_ENCRYPTION_POLICY,
       F2FS_IOC_GET_ENCRYPTION_PWSALT, which use xattr operations.
      
      Note that, these definition and codes are taken from ext4 crypto support.
      For f2fs, xattr operations and on-disk flags for superblock and inode were
      changed.
      Signed-off-by: NMichael Halcrow <mhalcrow@google.com>
      Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      Signed-off-by: NIldar Muslukhov <muslukhovi@gmail.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      f424f664
    • C
      f2fs: support FALLOC_FL_ZERO_RANGE · 75cd4e09
      Chao Yu 提交于
      Now, FALLOC_FL_ZERO_RANGE flag in ->fallocate is supported in ext4/xfs.
      
      In commit, the semantics of this flag is descripted as following:"
      1) Make sure that both offset and len are block size aligned.
      2) Update the i_size of inode by len bytes.
      3) Compute the file's logical block number against offset. If the computed
         block number is not the starting block of the extent, split the extent
         such that the block number is the starting block of the extent.
      4) Shift all the extents which are lying between
         [offset, last allocated extent] towards right by len bytes. This step
         will make a hole of len bytes at offset."
      
      This patch implements fallocate's FALLOC_FL_ZERO_RANGE for f2fs.
      Signed-off-by: NChao Yu <chao2.yu@samsung.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      75cd4e09
    • C
      f2fs: support FALLOC_FL_COLLAPSE_RANGE · b4ace337
      Chao Yu 提交于
      Now, FALLOC_FL_COLLAPSE_RANGE flag in ->fallocate is supported in ext4/xfs.
      
      In commit, the semantics of this flag is descripted as following:"
      1) It collapses the range lying between offset and length by removing any
         data blocks which are present in this range and than updates all the
         logical offsets of extents beyond "offset + len" to nullify the hole
         created by removing blocks. In short, it does not leave a hole.
      2) It should be used exclusively. No other fallocate flag in combination.
      3) Offset and length supplied to fallocate should be fs block size aligned
         in case of xfs and ext4.
      4) Collaspe range does not work beyond i_size."
      
      This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for f2fs.
      Signed-off-by: NChao Yu <chao2.yu@samsung.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      b4ace337
    • J
      f2fs: split find_data_page according to specific purposes · 43f3eae1
      Jaegeuk Kim 提交于
      This patch splits find_data_page as follows.
      
      1. f2fs_gc
       - use get_read_data_page() with read only
      
      2. find_in_level
       - use find_data_page without locked page
      
      3. truncate_partial_page
       - In the case cache_only mode, just drop cached page.
       - Ohterwise, use get_lock_data_page() and guarantee to truncate
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      43f3eae1
    • J
      f2fs: add sbi and page pointer in f2fs_io_info · 05ca3632
      Jaegeuk Kim 提交于
      This patch adds f2fs_sb_info and page pointers in f2fs_io_info structure.
      With this change, we can reduce a lot of parameters for IO functions.
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      05ca3632
    • J
      f2fs: add f2fs_may_inline_{data, dentry} · 01b960e9
      Jaegeuk Kim 提交于
      This patch adds f2fs_may_inline_data and f2fs_may_inline_dentry.
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      01b960e9
  16. 08 5月, 2015 1 次提交