- 05 12月, 2015 1 次提交
-
-
由 Junxiao Bi 提交于
introduced jbd2_write_access_granted() to improve write|undo_access speed, but missed to check the status of b_committed_data which caused a kernel panic on ocfs2. [ 6538.405938] ------------[ cut here ]------------ [ 6538.406686] kernel BUG at fs/ocfs2/suballoc.c:2400! [ 6538.406686] invalid opcode: 0000 [#1] SMP [ 6538.406686] Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront xen_fbfront parport_pc parport pcspkr i2c_piix4 acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix cirrus ttm drm_kms_helper drm fb_sys_fops sysimgblt sysfillrect i2c_core syscopyarea dm_mirror dm_region_hash dm_log dm_mod [ 6538.406686] CPU: 1 PID: 16265 Comm: mmap_truncate Not tainted 4.3.0 #1 [ 6538.406686] Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 [ 6538.406686] task: ffff88007c2bab00 ti: ffff880075b78000 task.ti: ffff880075b78000 [ 6538.406686] RIP: 0010:[<ffffffffa06a286b>] [<ffffffffa06a286b>] ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2] [ 6538.406686] RSP: 0018:ffff880075b7b7f8 EFLAGS: 00010246 [ 6538.406686] RAX: ffff8800760c5b40 RBX: ffff88006c06a000 RCX: ffffffffa06e6df0 [ 6538.406686] RDX: 0000000000000000 RSI: ffff88007a6f6ea0 RDI: ffff88007a760430 [ 6538.406686] RBP: ffff880075b7b878 R08: 0000000000000002 R09: 0000000000000001 [ 6538.406686] R10: ffffffffa06769be R11: 0000000000000000 R12: 0000000000000001 [ 6538.406686] R13: ffffffffa06a1750 R14: 0000000000000001 R15: ffff88007a6f6ea0 [ 6538.406686] FS: 00007f17fde30720(0000) GS:ffff88007f040000(0000) knlGS:0000000000000000 [ 6538.406686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6538.406686] CR2: 0000000000601730 CR3: 000000007aea0000 CR4: 00000000000406e0 [ 6538.406686] Stack: [ 6538.406686] ffff88007c2bb5b0 ffff880075b7b8e0 ffff88007a7604b0 ffff88006c640800 [ 6538.406686] ffff88007a7604b0 ffff880075d77390 0000000075b7b878 ffffffffa06a309d [ 6538.406686] ffff880075d752d8 ffff880075b7b990 ffff880075b7b898 0000000000000000 [ 6538.406686] Call Trace: [ 6538.406686] [<ffffffffa06a309d>] ? ocfs2_read_group_descriptor+0x6d/0xa0 [ocfs2] [ 6538.406686] [<ffffffffa06a3654>] _ocfs2_free_suballoc_bits+0xe4/0x320 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa06a397e>] _ocfs2_free_clusters+0xee/0x210 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa0682d50>] ? ocfs2_extend_trans+0x50/0x1a0 [ocfs2] [ 6538.406686] [<ffffffffa06a3ad5>] ocfs2_free_clusters+0x15/0x20 [ocfs2] [ 6538.406686] [<ffffffffa065072c>] ocfs2_replay_truncate_records+0xfc/0x290 [ocfs2] [ 6538.406686] [<ffffffffa06843ac>] ? ocfs2_start_trans+0xec/0x1d0 [ocfs2] [ 6538.406686] [<ffffffffa0654600>] __ocfs2_flush_truncate_log+0x140/0x2d0 [ocfs2] [ 6538.406686] [<ffffffffa0654394>] ? ocfs2_reserve_blocks_for_rec_trunc.clone.0+0x44/0x170 [ocfs2] [ 6538.406686] [<ffffffffa065acd4>] ocfs2_remove_btree_range+0x374/0x630 [ocfs2] [ 6538.406686] [<ffffffffa017486b>] ? jbd2_journal_stop+0x25b/0x470 [jbd2] [ 6538.406686] [<ffffffffa065d5b5>] ocfs2_commit_truncate+0x305/0x670 [ocfs2] [ 6538.406686] [<ffffffffa0683430>] ? ocfs2_journal_access_eb+0x20/0x20 [ocfs2] [ 6538.406686] [<ffffffffa067adb7>] ocfs2_truncate_file+0x297/0x380 [ocfs2] [ 6538.406686] [<ffffffffa01759e4>] ? jbd2_journal_begin_ordered_truncate+0x64/0xc0 [jbd2] [ 6538.406686] [<ffffffffa067c7a2>] ocfs2_setattr+0x572/0x860 [ocfs2] [ 6538.406686] [<ffffffff810e4a3f>] ? current_fs_time+0x3f/0x50 [ 6538.406686] [<ffffffff812124b7>] notify_change+0x1d7/0x340 [ 6538.406686] [<ffffffff8121abf9>] ? generic_getxattr+0x79/0x80 [ 6538.406686] [<ffffffff811f5876>] do_truncate+0x66/0x90 [ 6538.406686] [<ffffffff81120e30>] ? __audit_syscall_entry+0xb0/0x110 [ 6538.406686] [<ffffffff811f5bb3>] do_sys_ftruncate.clone.0+0xf3/0x120 [ 6538.406686] [<ffffffff811f5bee>] SyS_ftruncate+0xe/0x10 [ 6538.406686] [<ffffffff816aa2ae>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 6538.406686] Code: 28 48 81 ee b0 04 00 00 48 8b 92 50 fb ff ff 48 8b 80 b0 03 00 00 48 39 90 88 00 00 00 0f 84 30 fe ff ff 0f 0b eb fe 0f 0b eb fe <0f> 0b 0f 1f 00 eb fb 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 [ 6538.406686] RIP [<ffffffffa06a286b>] ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2] [ 6538.406686] RSP <ffff880075b7b7f8> [ 6538.691128] ---[ end trace 31cd7011d6770d7e ]--- [ 6538.694492] Kernel panic - not syncing: Fatal exception [ 6538.695484] Kernel Offset: disabled Fixes: de92c8ca("jbd2: speedup jbd2_journal_get_[write|undo]_access()") Cc: <stable@vger.kernel.org> Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
- 27 11月, 2015 3 次提交
-
-
由 Xu Cang 提交于
to fix sparse warning, add static to ext4_seq_##name##_fops struct. Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Al Viro 提交于
applying le32_to_cpu() to 16bit value is a bad idea... Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Al Viro 提交于
ex->ee_block is not host-endian (note that accesses of other fields of *ex right next to that line go through the helpers that do proper conversion from little-endian to host-endian; it might make sense to add similar for ->ee_block to avoid reintroducing that kind of bugs...) Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
- 25 11月, 2015 2 次提交
-
-
由 Jan Kara 提交于
Ted and Namjae have reported that truncated pages don't get timely reclaimed after being truncated in data=journal mode. The following test triggers the issue easily: for (i = 0; i < 1000; i++) { pwrite(fd, buf, 1024*1024, 0); fsync(fd); fsync(fd); ftruncate(fd, 0); } The reason is that journal_unmap_buffer() finds that truncated buffers are not journalled (jh->b_transaction == NULL), they are part of checkpoint list of a transaction (jh->b_cp_transaction != NULL) and have been already written out (!buffer_dirty(bh)). We clean such buffers but we leave them in the checkpoint list. Since checkpoint transaction holds a reference to the journal head, these buffers cannot be released until the checkpoint transaction is cleaned up. And at that point we don't call release_buffer_page() anymore so pages detached from mapping are lingering in the system waiting for reclaim to find them and free them. Fix the problem by removing buffers from transaction checkpoint lists when journal_unmap_buffer() finds out they don't have to be there anymore. Reported-and-tested-by: NNamjae Jeon <namjae.jeon@samsung.com> Fixes: de1b7941Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 David Turner 提交于
In ext4, the bottom two bits of {a,c,m}time_extra are used to extend the {a,c,m}time fields, deferring the year 2038 problem to the year 2446. When decoding these extended fields, for times whose bottom 32 bits would represent a negative number, sign extension causes the 64-bit extended timestamp to be negative as well, which is not what's intended. This patch corrects that issue, so that the only negative {a,c,m}times are those between 1901 and 1970 (as per 32-bit signed timestamps). Some older kernels might have written pre-1970 dates with 1,1 in the extra bits. This patch treats those incorrectly-encoded dates as pre-1970, instead of post-2311, until kernel 4.20 is released. Hopefully by then e2fsck will have fixed up the bad data. Also add a comment explaining the encoding of ext4's extra {a,c,m}time bits. Signed-off-by: NDavid Turner <novalis@novalis.org> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reported-by: NMark Harris <mh8928@yahoo.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23732 Cc: stable@vger.kernel.org
-
- 30 10月, 2015 1 次提交
-
-
由 Yaowei Bai 提交于
As new_valid_dev always returns 1, so !new_valid_dev check is not needed, remove it. Signed-off-by: NYaowei Bai <bywxiaobai@163.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
- 19 10月, 2015 4 次提交
-
-
由 John Stultz 提交于
The ext4_fsblk_t type is a long long, which should not be used with abs(), as is done in ext4_mb_check_group_pa(). This patch modifies ext4_mb_check_group_pa() to use abs64() instead. Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Dmitry Monakhov 提交于
It is appeared that we can pass journal related mount options and such options be shown in /proc/mounts Example: #mkfs.ext4 -F /dev/vdb #tune2fs -O ^has_journal /dev/vdb #mount /dev/vdb /mnt/ -ocommit=20,journal_async_commit #cat /proc/mounts | grep /mnt /dev/vdb /mnt ext4 rw,relatime,journal_checksum,journal_async_commit,commit=20,data=ordered 0 0 But options:"journal_checksum,journal_async_commit,commit=20,data=ordered" has nothing with reality because there is no journal at all. This patch disallow following options for journalless configurations: - journal_checksum - journal_async_commit - commit=%ld - data={writeback,ordered,journal} Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
-
由 Dmitry Monakhov 提交于
Currently MOPT_EXPLICIT treated as EXPLICIT_DELALLOC which may be changed in future. Let's fix it now. Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Daeho Jeong 提交于
If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the journaling will be aborted first and the error number will be recorded into JBD2 superblock and, finally, the system will enter into the panic state in "errors=panic" option. But, in the rare case, this sequence is little twisted like the below figure and it will happen that the system enters into panic state, which means the system reset in mobile environment, before completion of recording an error in the journal superblock. In this case, e2fsck cannot recognize that the filesystem failure occurred in the previous run and the corruption wouldn't be fixed. Task A Task B ext4_handle_error() -> jbd2_journal_abort() -> __journal_abort_soft() -> __jbd2_journal_abort_hard() | -> journal->j_flags |= JBD2_ABORT; | | __ext4_abort() | -> jbd2_journal_abort() | | -> __journal_abort_soft() | | -> if (journal->j_flags & JBD2_ABORT) | | return; | -> panic() | -> jbd2_journal_update_sb_errno() Tested-by: NHobin Woo <hobin.woo@samsung.com> Signed-off-by: NDaeho Jeong <daeho.jeong@samsung.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 18 10月, 2015 10 次提交
-
-
由 Andy Leiserson 提交于
"group" is the group where the backup will be placed, and is initialized to zero in the declaration. This meant that backups for meta_bg descriptors were erroneously written to the backup block group descriptors in groups 1 and (desc_per_block-1). Reproduction information: mke2fs -Fq -t ext4 -b 1024 -O ^resize_inode /tmp/foo.img 16G truncate -s 24G /tmp/foo.img losetup /dev/loop0 /tmp/foo.img mount /dev/loop0 /mnt resize2fs /dev/loop0 umount /dev/loop0 dd if=/dev/zero of=/dev/loop0 bs=1024 count=2 e2fsck -fy /dev/loop0 losetup -d /dev/loop0 Signed-off-by: NAndy Leiserson <andy@leiserson.org> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Lukas Czerner 提交于
There is a use-after-free possibility in __ext4_journal_stop() in the case that we free the handle in the first jbd2_journal_stop() because we're referencing handle->h_err afterwards. This was introduced in 9705acd6 and it is wrong. Fix it by storing the handle->h_err value beforehand and avoid referencing potentially freed handle. Fixes: 9705acd6Signed-off-by: NLukas Czerner <lczerner@redhat.com> Reviewed-by: NAndreas Dilger <adilger@dilger.ca> Cc: stable@vger.kernel.org
-
由 Jan Kara 提交于
Unlike comments and expectation of callers journal_clean_one_cp_list() returned 1 not only if it freed the transaction but also if it freed some buffers in the transaction. That could make __jbd2_journal_clean_checkpoint_list() skip processing t_checkpoint_io_list and continue with processing the next transaction. This is mostly a cosmetic issue since the only result is we can sometimes free less memory than we could. But it's still worth fixing. Fix journal_clean_one_cp_list() to return 1 only if the transaction was really freed. Fixes: 50849db3Signed-off-by: NJan Kara <jack@suse.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Daeho Jeong 提交于
When you repeatly execute xfstest generic/269 with bigalloc_1k option enabled using the below command: "./kvm-xfstests -c bigalloc_1k -m nodelalloc -C 1000 generic/269" you can easily see the below bug message. "JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh);" This means that an already revoked buffer is erroneously revoked again and it is caused by doing revoke for the buffer at the wrong position in ext4_free_blocks(). We need to re-position the buffer revoke procedure for an unspecified buffer after checking the cluster boundary for bigalloc option. If not, some part of the cluster can be doubly revoked. Signed-off-by: NDaeho Jeong <daeho.jeong@samsung.com>
-
由 Darrick J. Wong 提交于
Make the bitmap reaading routines return real error codes (EIO, EFSCORRUPTED, EFSBADCRC) which can then be reflected back to userspace for more precise diagnosis work. In particular, this means that mballoc no longer claims that we're out of memory if the block bitmaps become corrupt. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Darrick J. Wong 提交于
Create separate predicate functions to test/set/clear feature flags, thereby replacing the wordy old macros. Furthermore, clean out the places where we open-coded feature tests. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Darrick J. Wong 提交于
Create separate predicate functions to test/set/clear feature flags, thereby replacing the wordy old macros. Furthermore, clean out the places where we open-coded feature tests. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Darrick J. Wong 提交于
Instead of overloading EIO for CRC errors and corrupt structures, return the same error codes that XFS returns for the same issues. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Darrick J. Wong 提交于
Allow the filesystem to store the metadata checksum seed in the superblock and add an incompat feature to say that we're using it. This enables tune2fs to change the UUID on a mounted metadata_csum FS without having to (racy!) rewrite all disk metadata. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
- 15 10月, 2015 3 次提交
-
-
由 Darrick J. Wong 提交于
Prevent clean ext3 filesystems from mounting by default with the ext2 driver (with no journal!) by putting ext4 ahead of ext2 in the default probe order. This will have the effect of mounting ext2 filesystems with ext4.ko by default, which is a safer failure than hoping the user notices that their journalled ext3 is now running without a journal! Users who require ext2.ko for ext2 can either disable ext4.ko or explicitly request ext2 via "mount -t ext2" or "rootfstype=ext2". Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Darrick J. Wong 提交于
Change the journal's checksum functions to gate on whether or not the crc32c driver is loaded, and gate the loading on the superblock bits. This prevents a journal crash if someone loads a journal in no-csum mode and then randomizes the superblock, thus flipping on the feature bits. Tested-By: NNikolay Borisov <kernel@kyup.com> Reported-by: NNikolay Borisov <kernel@kyup.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
If there is a error while copying data from userspace into the page cache during a write(2) system call, in data=journal mode, in ext4_journalled_write_end() were using page_zero_new_buffers() from fs/buffer.c. Unfortunately, this sets the buffer dirty flag, which is no good if journalling is enabled. This is a long-standing bug that goes back for years and years in ext3, but a combination of (a) data=journal not being very common, (b) in many case it only results in a warning message. and (c) only very rarely causes the kernel hang, means that we only really noticed this as a problem when commit 998ef75d caused this failure to happen frequently enough to cause generic/208 to fail when run in data=journal mode. The fix is to have our own version of this function that doesn't call mark_dirty_buffer(), since we will end up calling ext4_handle_dirty_metadata() on the buffer head(s) in questions very shortly afterwards in ext4_journalled_write_end(). Thanks to Dave Hansen and Linus Torvalds for helping to identify the root cause of the problem. Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.com>
-
- 03 10月, 2015 5 次提交
-
-
由 Theodore Ts'o 提交于
Fix multiple bugs in ext4_encrypted_zeroout(), including one that could cause us to write an encrypted zero page to the wrong location on disk, potentially causing data and file system corruption. Fortunately, this tends to only show up in stress tests, but even with these fixes, we are seeing some test failures with generic/127 --- but these are now caused by data failures instead of metadata corruption. Since ext4_encrypted_zeroout() is only used for some optimizations to keep the extent tree from being too fragmented, and ext4_encrypted_zeroout() itself isn't all that optimized from a time or IOPS perspective, disable the extent tree optimization for encrypted inodes for now. This prevents the data corruption issues reported by generic/127 until we can figure out what's going wrong. Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Theodore Ts'o 提交于
Buggy (or hostile) userspace should not be able to cause the kernel to crash. Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Theodore Ts'o 提交于
Since ext4_page_crypto() doesn't need an encryption context (at least not any more), this allows us to simplify a number function signature and also allows us to avoid needing to allocate a context in ext4_block_write_begin(). It also means we no longer need a separate ext4_decrypt_one() function. Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
In cases where the file system block size is the same as the page size, and ext4_writepage() is asked to write out a page which is either has the unwritten bit set in the extent tree, or which does not yet have a block assigned due to delayed allocation, we can bail out early and, unlocking the page earlier and avoiding a round trip through ext4_bio_write_page() with the attendant calls to set_page_writeback() and redirty_page_for_writeback(). Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
There are times when ext4_bio_write_page() is called even though we don't actually need to do any I/O. This happens when ext4_writepage() gets called by the jbd2 commit path when an inode needs to force its pages written out in order to provide data=ordered guarantees --- and a page is backed by an unwritten (e.g., uninitialized) block on disk, or if delayed allocation means the page's backing store hasn't been allocated yet. In that case, we need to skip the call to ext4_encrypt_page(), since in addition to wasting CPU, it leads to a bounce page and an ext4 crypto context getting leaked. Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 24 9月, 2015 3 次提交
-
-
由 Theodore Ts'o 提交于
This allows us to refactor the procfs code, which saves a bit of compiled space. More importantly it isolates most of the procfs support code into a single file, so it's easier to #ifdef it out if the proc file system has been disabled. Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Make the code more easily extensible as well as taking up less compiled space. Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Also statically allocate the ext4_kset and ext4_feat objects, since we only need exactly one of each, and it's simpler and less code if we drop the dynamic allocation and deallocation when it's not needed. Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
-
- 21 9月, 2015 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 20 9月, 2015 7 次提交
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Three fixes and a resulting cleanup for -rc2: - Andre Przywara reported that he was seeing a warning with the new cast inside DMA_ERROR_CODE's definition, and fixed the incorrect use. - Doug Anderson noticed that kgdb causes a "scheduling while atomic" bug. - OMAP5 folk noticed that their Thumb-2 compiled X servers crashed when enabling support to cover ARMv6 CPUs due to a kernel bug leaking some conditional context into the signal handler" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8425/1: kgdb: Don't try to stop the machine when setting breakpoints ARM: 8437/1: dma-mapping: fix build warning with new DMA_ERROR_CODE definition ARM: get rid of needless #if in signal handling code ARM: fix Thumb2 signal handling when ARMv6 is enabled
-
由 Linus Torvalds 提交于
Merge tag 'linux-kselftest-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This update contains 7 fixes for problems ranging from build failurs to incorrect error reporting" * tag 'linux-kselftest-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: exec: revert to default emit rule selftests: change install command to rsync selftests: mqueue: simplify the Makefile selftests: mqueue: allow extra cflags selftests: rename jump label to static_keys selftests/seccomp: add support for s390 seltests/zram: fix syntax error
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI updates from Rafael Wysocki: "Included are: a somewhat late devfreq update which however is mostly fixes and cleanups with one new thing only (the PPMUv2 support on Exynos5433), an ACPI cpufreq driver fixup and two ACPI core cleanups related to preprocessor directives. Specifics: - Fix a memory allocation size in the devfreq core (Xiaolong Ye). - Fix a mistake in the exynos-ppmu DT binding (Javier Martinez Canillas). - Add support for PPMUv2 ((Platform Performance Monitoring Unit version 2.0) on the Exynos5433 SoCs (Chanwoo Choi). - Fix a type casting bug in the Exynos PPMU code (MyungJoo Ham). - Assorted devfreq code cleanups and optimizations (Javi Merino, MyungJoo Ham, Viresh Kumar). - Fix up the ACPI cpufreq driver to use a more lightweight way to get to its private data in the ->get() callback (Rafael J Wysocki). - Fix a CONFIG_ prefix bug in one of the ACPI drivers and make the ACPI subsystem use IS_ENABLED() instead of #ifdefs in function bodies (Sudeep Holla)" * tag 'pm+acpi-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: acpi-cpufreq: Use cpufreq_cpu_get_raw() in ->get() ACPI: Eliminate CONFIG_.*{, _MODULE} #ifdef in favor of IS_ENABLED() ACPI: int340x_thermal: add missing CONFIG_ prefix PM / devfreq: Fix incorrect type issue. PM / devfreq: tegra: Update governor to use devfreq_update_stats() PM / devfreq: comments for get_dev_status usage updated PM / devfreq: drop comment about thermal setting max_freq PM / devfreq: cache the last call to get_dev_status() PM / devfreq: Drop unlikely before IS_ERR(_OR_NULL) PM / devfreq: exynos-ppmu: bit-wise operation bugfix. PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2 PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433 PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk fixes from Stephen Boyd: "A few driver fixes for tegra, rockchip, and st SoCs and a two-liner in the framework to avoid oops when get_parent ops return out of range values on tegra platforms" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: drivers: clk: st: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x clk: check for invalid parent index of orphans in __clk_init() clk: tegra: dfll: Properly protect OPP list clk: rockchip: add critical clock for rk3368
-
由 Linus Torvalds 提交于
Merge tag 'led-fixes-for-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fixes from Jacek Anaszewski: - fix module autoload for six OF platform drivers (aat1290, bcm6328, bcm6358, ktd2692, max77693, ns2) - aat1290: add missing static modifier - ipaq-micro: add missing LEDS_CLASS dependency - lp55xx: correct Kconfig dependecy for f/w user helper * tag 'led-fixes-for-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds:lp55xx: Correct Kconfig dependency for f/w user helper leds: leds-ipaq-micro: Add LEDS_CLASS dependency leds: aat1290: add 'static' modifier to init_mm_current_scale leds: leds-ns2: Fix module autoload for OF platform driver leds: max77693: Fix module autoload for OF platform driver leds: ktd2692: Fix module autoload for OF platform driver leds: bcm6358: Fix module autoload for OF platform driver leds: bcm6328: Fix module autoload for OF platform driver leds: aat1290: Fix module autoload for OF platform driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Doug Ledford: "The new hfi1 driver in staging/rdma has had a number of fixup patches since being added to the tree. This is the first batch of those fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/hfi: Properly set permissions for user device files IB/hfi1: mask vs shift confusion IB/hfi1: clean up some defines IB/hfi1: info leak in get_ctxt_info() IB/hfi1: fix a locking bug IB/hfi1: checking for NULL instead of IS_ERR IB/hfi1: fix sdma_descq_cnt parameter parsing IB/hfi1: fix copy_to/from_user() error handling IB/hfi1: fix pstateinfo from returning improperly byteswapped value
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: - a boot regression (since v4.2) fix for some ARM configurations from Tyler - regression (since v4.1) fixes for mkfs.xfs on a DAX enabled device from Jeff. These are tagged for -stable. - a pair of locking fixes from Axel that are hidden from lockdep since they involve device_lock(). The "btt" one is tagged for -stable, the other only applies to the new "pfn" mechanism in v4.3. - a fix for the pmem ->rw_page() path to use wmb_pmem() from Ross. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: mm: fix type cast in __pfn_to_phys() pmem: add proper fencing to pmem_rw_page() libnvdimm: pfn_devs: Fix locking in namespace_store libnvdimm: btt_devs: Fix locking in namespace_store blockdev: don't set S_DAX for misaligned partitions dax: fix O_DIRECT I/O to the last block of a blockdev
-