- 23 7月, 2021 2 次提交
-
-
由 Lucas De Marchi 提交于
XeHP SDV is a Intel® dGPU without display. This is just the definition of some basic platform macros, by large a copy of current state of Tigerlake which does not reflect the end state of this platform. v2: - Switch to intel_step infrastructure for stepping matches. (Jani) v3: - Bring earlier in patch series and leave addition of new media engines to the engine mask for a later patch. Bspec: 44467, 48077 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NStuart Summers <stuart.summers@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-3-matthew.d.roper@intel.com
-
由 Lucas De Marchi 提交于
Besides the arch version returned by GRAPHICS_VER(), new platforms contain a "release id" to make clear the difference from one platform to another. The release id number is not formally defined by hardware until future platforms that will expose it via a new GMD_ID register. For the platforms we support before that register becomes available we will set the values in software and we can set them as we please. So the plan is to set them so we can group different features under a single GRAPHICS_VER_FULL() check. After GMD_ID is used, the usefulness of a "full version check" will be greatly reduced and will be mostly used for deciding workarounds and a few code paths. So it makes sense to keep it as a separate field from graphics_ver. Also, as a platform with `release == n` may be closer feature-wise to `n - 2` than to `n - 1`, use the word "release" rather than the more common "minor" for this This is a mix of 2 independent changes: one by me and the other by Matt Roper. v2: - Reword commit message to make it clearer why we don't call it "minor" (Matt Roper and Tvrtko) - Rename variables s/*_ver_release/*_rel/ and print them in a single line formatted as {ver}.{rel:2} (Jani and Matt Roper) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-2-lucas.demarchi@intel.com (cherry picked from commit ca6374e2) Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
-
- 15 7月, 2021 9 次提交
-
-
由 Matt Roper 提交于
We're past the point at which we usually drop workarounds that were never needed on production hardware. The driver will already print an error and apply taint if loaded on pre-production hardware. Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-13-matthew.d.roper@intel.com
-
由 Matt Roper 提交于
All of the Cannon Lake hardware that came out had graphics fused off, and our userspace drivers have already dropped their support for the platform; CNL-specific code in i915 that isn't inherited by subsequent platforms is effectively dead code. Let's remove all of the CNL-specific workarounds as a quick and easy first step. References: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6899Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-12-matthew.d.roper@intel.com
-
由 Matt Roper 提交于
Switch DG1 to use a revid->stepping table as we're trying to do on all platforms going forward. This removes the last use of IS_REVID() and REVID_FOREVER, so remove those now-unused macros as well to prevent their accidental use on future platforms. v2: - Use COMMON_STEP() macro in table. (Anusha) Bspec: 44463 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-11-matthew.d.roper@intel.com
-
由 Matt Roper 提交于
Switch RKL to use a revid->stepping table as we're trying to do on all platforms going forward. Bspec: 44501 Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-10-matthew.d.roper@intel.com
-
由 Matt Roper 提交于
Switch JSL/EHL to use a revid->stepping table as we're trying to do on all platforms going forward. v2: - Use COMMON_STEP(). (Anusha) Bspec: 29153 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-9-matthew.d.roper@intel.com
-
由 Matt Roper 提交于
Switch ICL to use a revid->stepping table as we're trying to do on all platforms going forward. While we're at it, let's include some additional steppings that have popped up, even if we don't yet have any workarounds tied to those steppings (we probably need to audit our workaround list soon to see if any of the bounds have moved or if new workarounds have appeared). Note that the current bspec table is missing information about how to map PCI revision ID to GT/display steppings; it only provides an SoC stepping. The mapping to GT/display steppings (which aren't always the same as the SoC stepping) used to be in the bspec, but was apparently dropped during an update in Nov 2019; I've made my changes here based on an older bspec snapshot that still had the necessary information. We've requested that the missing information be restored. I'm only including the production revids in the table here since we're past the point at which we usually stop trying to support pre-production hardware. An appropriate check is added to intel_detect_preproduction_hw() to print an error and taint the kernel just in case someone still tries to load the driver on old pre-production hardware. v2: - Drop pre-production steppings and add error/taint at startup when loading on pre-production hardware. Bspec: 21141 # pre-Nov 2019 snapshot Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-8-matthew.d.roper@intel.com
-
由 Matt Roper 提交于
Switch GLK to use a revid->stepping table as we're trying to do on all platforms going forward. Pre-production and placeholder revisions are omitted. Although nothing in the code is using the data from this table at the moment, we expect some upcoming DMC patches to start utilizing it. Bspec: 19131 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-7-matthew.d.roper@intel.com
-
由 Matt Roper 提交于
Switch BXT to use a revid->stepping table as we're trying to do on all platforms going forward. Note that the REVID macros we had before weren't being used anywhere in the code and weren't even correct; the table values come from the bspec (and omits all the placeholder and preproduction revisions). Although nothing in the code is using the data from this table at the moment, we expect some upcoming DMC patches to start utilizing it. Bspec: 13620 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-6-matthew.d.roper@intel.com
-
由 Matt Roper 提交于
Switch SKL to use a revid->stepping table as we're trying to do on all platforms going forward. Also drop the preproduction revisions and add the newer steppings we hadn't already handled. Note that SKL has a case where a newer revision ID corresponds to an older GT/disp stepping (0x9 -> STEP_J0, 0xA -> STEP_I1). Also, the lack of a revision ID 0x8 in the table is intentional and not an oversight. We'll re-write the KBL-specific comment to make it clear that these kind of quirks are expected. v2: - Since GT and display steppings are always identical on SKL use a macro to set both values at once in a more readable manner. (Anusha) - Drop preproduction steppings. Bspec: 13626 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-4-matthew.d.roper@intel.com
-
- 07 6月, 2021 1 次提交
-
-
由 Lucas De Marchi 提交于
For some reason coccinelle misses a few cases in header files with calls to INTEL_GEN()/IS_GEN(). Do a manual conversion for those. Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-6-lucas.demarchi@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20210606045050.103862-3-lucas.demarchi@intel.com
-
- 03 6月, 2021 1 次提交
-
-
由 Anusha Srivatsa 提交于
Move struct intel_dmc from i915_drv.h to intel_dmc.h. v2: Add includes along with moving the struct. Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-4-anusha.srivatsa@intel.com
-
- 02 6月, 2021 3 次提交
-
-
由 Thomas Hellström 提交于
Temporarily remove the buddy allocator and related selftests and hook up the TTM range manager for i915 regions. Also modify the mock region selftests somewhat to account for a fragmenting manager. Signed-off-by: NThomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: NMatthew Auld <matthew.auld@intel.com> Signed-off-by: NMatthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210602083818.241793-2-thomas.hellstrom@linux.intel.com
-
由 Matthew Auld 提交于
This reverts commit b739f125. We are unfortunately seeing more issues like we did in 293837b9 ("Revert "i915: fix remap_io_sg to verify the pgprot""), except this is now for the vm_fault_gtt path, where we are now hitting the same BUG_ON(!pte_none(*pte)): [10887.466150] kernel BUG at mm/memory.c:2183! [10887.466162] invalid opcode: 0000 [#1] PREEMPT SMP PTI [10887.466168] CPU: 0 PID: 7775 Comm: ffmpeg Tainted: G U 5.13.0-rc3-CI-Nightly #1 [10887.466174] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.40 07/14/2017 [10887.466177] RIP: 0010:remap_pfn_range_notrack+0x30f/0x440 [10887.466188] Code: e8 96 d7 e0 ff 84 c0 0f 84 27 01 00 00 48 ba 00 f0 ff ff ff ff 0f 00 4c 89 e0 48 c1 e0 0c 4d 85 ed 75 96 48 21 d0 31 f6 eb a9 <0f> 0b 48 39 37 0f 85 0e 01 00 00 48 8b 0c 24 48 39 4f 08 0f 85 00 [10887.466193] RSP: 0018:ffffc90006e33c50 EFLAGS: 00010286 [10887.466198] RAX: 800000000000002f RBX: 00007f5e01800000 RCX: 0000000000000028 [10887.466201] RDX: 0000000000000001 RSI: ffffea0000000000 RDI: 0000000000000000 [10887.466204] RBP: ffffea000033fea8 R08: 800000000000002f R09: ffff8881072256e0 [10887.466207] R10: ffffc9000b84fff8 R11: 0000000017dab000 R12: 0000000000089f9f [10887.466210] R13: 800000000000002f R14: 00007f5e017e4000 R15: ffff88800cffaf20 [10887.466213] FS: 00007f5e04849640(0000) GS:ffff888278000000(0000) knlGS:0000000000000000 [10887.466216] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10887.466220] CR2: 00007fd9b191a2ac CR3: 00000001829ac000 CR4: 00000000003506f0 [10887.466223] Call Trace: [10887.466233] vm_fault_gtt+0x1ca/0x5d0 [i915] [10887.466381] ? ktime_get+0x38/0x90 [10887.466389] __do_fault+0x37/0x90 [10887.466395] __handle_mm_fault+0xc46/0x1200 [10887.466402] handle_mm_fault+0xce/0x2a0 [10887.466407] do_user_addr_fault+0x1c5/0x660 Reverting this commit is reported to fix the issue. Reported-by: NEero Tamminen <eero.t.tamminen@intel.com> References: https://gitlab.freedesktop.org/drm/intel/-/issues/3519 Fixes: b739f125 ("i915: use io_mapping_map_user") Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NMatthew Auld <matthew.auld@intel.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210527185145.458021-1-matthew.auld@intel.com (cherry picked from commit 0e4fe0c9) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Matthew Auld 提交于
This reverts commit b739f125. We are unfortunately seeing more issues like we did in 293837b9 ("Revert "i915: fix remap_io_sg to verify the pgprot""), except this is now for the vm_fault_gtt path, where we are now hitting the same BUG_ON(!pte_none(*pte)): [10887.466150] kernel BUG at mm/memory.c:2183! [10887.466162] invalid opcode: 0000 [#1] PREEMPT SMP PTI [10887.466168] CPU: 0 PID: 7775 Comm: ffmpeg Tainted: G U 5.13.0-rc3-CI-Nightly #1 [10887.466174] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.40 07/14/2017 [10887.466177] RIP: 0010:remap_pfn_range_notrack+0x30f/0x440 [10887.466188] Code: e8 96 d7 e0 ff 84 c0 0f 84 27 01 00 00 48 ba 00 f0 ff ff ff ff 0f 00 4c 89 e0 48 c1 e0 0c 4d 85 ed 75 96 48 21 d0 31 f6 eb a9 <0f> 0b 48 39 37 0f 85 0e 01 00 00 48 8b 0c 24 48 39 4f 08 0f 85 00 [10887.466193] RSP: 0018:ffffc90006e33c50 EFLAGS: 00010286 [10887.466198] RAX: 800000000000002f RBX: 00007f5e01800000 RCX: 0000000000000028 [10887.466201] RDX: 0000000000000001 RSI: ffffea0000000000 RDI: 0000000000000000 [10887.466204] RBP: ffffea000033fea8 R08: 800000000000002f R09: ffff8881072256e0 [10887.466207] R10: ffffc9000b84fff8 R11: 0000000017dab000 R12: 0000000000089f9f [10887.466210] R13: 800000000000002f R14: 00007f5e017e4000 R15: ffff88800cffaf20 [10887.466213] FS: 00007f5e04849640(0000) GS:ffff888278000000(0000) knlGS:0000000000000000 [10887.466216] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10887.466220] CR2: 00007fd9b191a2ac CR3: 00000001829ac000 CR4: 00000000003506f0 [10887.466223] Call Trace: [10887.466233] vm_fault_gtt+0x1ca/0x5d0 [i915] [10887.466381] ? ktime_get+0x38/0x90 [10887.466389] __do_fault+0x37/0x90 [10887.466395] __handle_mm_fault+0xc46/0x1200 [10887.466402] handle_mm_fault+0xce/0x2a0 [10887.466407] do_user_addr_fault+0x1c5/0x660 Reverting this commit is reported to fix the issue. Reported-by: NEero Tamminen <eero.t.tamminen@intel.com> References: https://gitlab.freedesktop.org/drm/intel/-/issues/3519 Fixes: b739f125 ("i915: use io_mapping_map_user") Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NMatthew Auld <matthew.auld@intel.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210527185145.458021-1-matthew.auld@intel.com
-
- 26 5月, 2021 1 次提交
-
-
由 Manasi Navare 提交于
On XE_LPD, VRR CTL register adds a new VRR Guardband bitfield replacing the pipeline full and deprecating the pipeline override bit. This patch adds this corresponding bitfield in the register defs, crtc state vrr structure and populates this in vrr compute config and vrr enable functions. It also adds the corresponding HW state readout for this field. Bspec: 50508 Cc: Aditya Swarup <aditya.swarup@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: NManasi Navare <manasi.d.navare@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAditya Swarup <aditya.swarup@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-3-matthew.d.roper@intel.com
-
- 20 5月, 2021 3 次提交
-
-
由 Matt Roper 提交于
XE_LPD reduces the number of regular watermark latency levels from 8 to 6 on non-dgfx platforms. However the hardware also adds a special purpose SAGV wateramrk (and an accompanying transition watermark) that will be used by the hardware in place of the level 0 values during SAGV transitions. Bspec: 49325, 49326, 50419 Cc: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com> Reviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-4-lucas.demarchi@intel.com
-
由 Anusha Srivatsa 提交于
No functional change. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-3-anusha.srivatsa@intel.com
-
由 Anusha Srivatsa 提交于
No functional change. v2: Chchpatch fixes. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-2-anusha.srivatsa@intel.com
-
- 18 5月, 2021 1 次提交
-
-
由 Thomas Zimmermann 提交于
i915 does not use DRM legacy code. Remove the rsp include statements. Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de> Acked-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210516185937.5644-2-tzimmermann@suse.de
-
- 15 5月, 2021 1 次提交
-
-
由 José Roberto de Souza 提交于
This will allow us to better implement workarounds. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-17-matthew.d.roper@intel.com
-
- 07 5月, 2021 1 次提交
-
-
由 Clinton Taylor 提交于
Add ADL-P to the device_info table and support MACROS. Bspec: 49185, 55372, 55373 Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NImre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-4-imre.deak@intel.com
-
- 01 5月, 2021 1 次提交
-
-
由 Christoph Hellwig 提交于
Replace the home-grown remap_io_mapping that abuses apply_to_page_range with the proper io_mapping_map_user interface. Link: https://lkml.kernel.org/r/20210326055505.1424432-4-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 4月, 2021 1 次提交
-
-
由 Maarten Lankhorst 提交于
The stop_machine() lock may allocate memory, but is called inside vm->mutex, which is taken in the shrinker. This will cause a lockdep splat, as can be seen below: <4>[ 462.585762] ====================================================== <4>[ 462.585768] WARNING: possible circular locking dependency detected <4>[ 462.585773] 5.12.0-rc5-CI-Trybot_7644+ #1 Tainted: G U <4>[ 462.585779] ------------------------------------------------------ <4>[ 462.585783] i915_selftest/5540 is trying to acquire lock: <4>[ 462.585788] ffffffff826440b0 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x12/0x30 <4>[ 462.585814] but task is already holding lock: <4>[ 462.585818] ffff888125369c70 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x38e/0xb40 [i915] <4>[ 462.586301] which lock already depends on the new lock. <4>[ 462.586305] the existing dependency chain (in reverse order) is: <4>[ 462.586309] -> #2 (&vm->mutex/1){+.+.}-{3:3}: <4>[ 462.586323] i915_gem_shrinker_taints_mutex+0x2d/0x50 [i915] <4>[ 462.586719] i915_address_space_init+0x12d/0x130 [i915] <4>[ 462.587092] ppgtt_init+0x4e/0x80 [i915] <4>[ 462.587467] gen8_ppgtt_create+0x3e/0x5c0 [i915] <4>[ 462.587828] i915_ppgtt_create+0x28/0xf0 [i915] <4>[ 462.588203] intel_gt_init+0x123/0x370 [i915] <4>[ 462.588572] i915_gem_init+0x129/0x1f0 [i915] <4>[ 462.588971] i915_driver_probe+0x753/0xd80 [i915] <4>[ 462.589320] i915_pci_probe+0x43/0x1d0 [i915] <4>[ 462.589671] pci_device_probe+0x9e/0x110 <4>[ 462.589680] really_probe+0xea/0x410 <4>[ 462.589690] driver_probe_device+0xd9/0x140 <4>[ 462.589697] device_driver_attach+0x4a/0x50 <4>[ 462.589704] __driver_attach+0x83/0x140 <4>[ 462.589711] bus_for_each_dev+0x75/0xc0 <4>[ 462.589718] bus_add_driver+0x14b/0x1f0 <4>[ 462.589724] driver_register+0x66/0xb0 <4>[ 462.589731] i915_init+0x70/0x87 [i915] <4>[ 462.590053] do_one_initcall+0x56/0x2e0 <4>[ 462.590061] do_init_module+0x55/0x200 <4>[ 462.590068] load_module+0x2703/0x2990 <4>[ 462.590074] __do_sys_finit_module+0xad/0x110 <4>[ 462.590080] do_syscall_64+0x33/0x80 <4>[ 462.590089] entry_SYSCALL_64_after_hwframe+0x44/0xae <4>[ 462.590096] -> #1 (fs_reclaim){+.+.}-{0:0}: <4>[ 462.590109] fs_reclaim_acquire+0x9f/0xd0 <4>[ 462.590118] kmem_cache_alloc_trace+0x3d/0x430 <4>[ 462.590126] intel_cpuc_prepare+0x3b/0x1b0 <4>[ 462.590133] cpuhp_invoke_callback+0x9e/0x890 <4>[ 462.590141] _cpu_up+0xa4/0x130 <4>[ 462.590147] cpu_up+0x82/0x90 <4>[ 462.590153] bringup_nonboot_cpus+0x4a/0x60 <4>[ 462.590159] smp_init+0x21/0x5c <4>[ 462.590167] kernel_init_freeable+0x8a/0x1b7 <4>[ 462.590175] kernel_init+0x5/0xff <4>[ 462.590181] ret_from_fork+0x22/0x30 <4>[ 462.590187] -> #0 (cpu_hotplug_lock){++++}-{0:0}: <4>[ 462.590199] __lock_acquire+0x1520/0x2590 <4>[ 462.590207] lock_acquire+0xd1/0x3d0 <4>[ 462.590213] cpus_read_lock+0x39/0xc0 <4>[ 462.590219] stop_machine+0x12/0x30 <4>[ 462.590226] bxt_vtd_ggtt_insert_entries__BKL+0x36/0x50 [i915] <4>[ 462.590601] ggtt_bind_vma+0x5d/0x80 [i915] <4>[ 462.590970] i915_vma_bind+0xdc/0x1c0 [i915] <4>[ 462.591374] i915_vma_pin_ww+0x435/0xb40 [i915] <4>[ 462.591779] make_obj_busy+0xcb/0x330 [i915] <4>[ 462.592170] igt_mmap_offset_exhaustion+0x45f/0x4c0 [i915] <4>[ 462.592562] __i915_subtests.cold.7+0x42/0x92 [i915] <4>[ 462.592995] __run_selftests.part.3+0x10d/0x172 [i915] <4>[ 462.593428] i915_live_selftests.cold.5+0x1f/0x47 [i915] <4>[ 462.593860] i915_pci_probe+0x93/0x1d0 [i915] <4>[ 462.594210] pci_device_probe+0x9e/0x110 <4>[ 462.594217] really_probe+0xea/0x410 <4>[ 462.594226] driver_probe_device+0xd9/0x140 <4>[ 462.594233] device_driver_attach+0x4a/0x50 <4>[ 462.594240] __driver_attach+0x83/0x140 <4>[ 462.594247] bus_for_each_dev+0x75/0xc0 <4>[ 462.594254] bus_add_driver+0x14b/0x1f0 <4>[ 462.594260] driver_register+0x66/0xb0 <4>[ 462.594267] i915_init+0x70/0x87 [i915] <4>[ 462.594586] do_one_initcall+0x56/0x2e0 <4>[ 462.594592] do_init_module+0x55/0x200 <4>[ 462.594599] load_module+0x2703/0x2990 <4>[ 462.594605] __do_sys_finit_module+0xad/0x110 <4>[ 462.594612] do_syscall_64+0x33/0x80 <4>[ 462.594618] entry_SYSCALL_64_after_hwframe+0x44/0xae <4>[ 462.594625] other info that might help us debug this: <4>[ 462.594629] Chain exists of: cpu_hotplug_lock --> fs_reclaim --> &vm->mutex/1 <4>[ 462.594645] Possible unsafe locking scenario: <4>[ 462.594648] CPU0 CPU1 <4>[ 462.594652] ---- ---- <4>[ 462.594655] lock(&vm->mutex/1); <4>[ 462.594664] lock(fs_reclaim); <4>[ 462.594671] lock(&vm->mutex/1); <4>[ 462.594679] lock(cpu_hotplug_lock); <4>[ 462.594686] *** DEADLOCK *** <4>[ 462.594690] 4 locks held by i915_selftest/5540: <4>[ 462.594696] #0: ffff888100fbc240 (&dev->mutex){....}-{3:3}, at: device_driver_attach+0x18/0x50 <4>[ 462.594715] #1: ffffc900006cb9a0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: make_obj_busy+0x81/0x330 [i915] <4>[ 462.595118] #2: ffff88812a6081e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: make_obj_busy+0x21f/0x330 [i915] <4>[ 462.595519] #3: ffff888125369c70 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x38e/0xb40 [i915] <4>[ 462.595934] stack backtrace: <4>[ 462.595939] CPU: 0 PID: 5540 Comm: i915_selftest Tainted: G U 5.12.0-rc5-CI-Trybot_7644+ #1 <4>[ 462.595947] Hardware name: GOOGLE Kefka/Kefka, BIOS MrChromebox 02/04/2018 <4>[ 462.595952] Call Trace: <4>[ 462.595961] dump_stack+0x7f/0xad <4>[ 462.595974] check_noncircular+0x12e/0x150 <4>[ 462.595982] ? save_stack.isra.17+0x3f/0x70 <4>[ 462.595991] ? drm_mm_insert_node_in_range+0x34a/0x5b0 <4>[ 462.596000] ? i915_vma_pin_ww+0x9ec/0xb40 [i915] <4>[ 462.596410] __lock_acquire+0x1520/0x2590 <4>[ 462.596419] ? do_init_module+0x55/0x200 <4>[ 462.596429] lock_acquire+0xd1/0x3d0 <4>[ 462.596435] ? stop_machine+0x12/0x30 <4>[ 462.596445] ? gen8_ggtt_insert_entries+0xf0/0xf0 [i915] <4>[ 462.596816] cpus_read_lock+0x39/0xc0 <4>[ 462.596824] ? stop_machine+0x12/0x30 <4>[ 462.596831] stop_machine+0x12/0x30 <4>[ 462.596839] bxt_vtd_ggtt_insert_entries__BKL+0x36/0x50 [i915] <4>[ 462.597210] ggtt_bind_vma+0x5d/0x80 [i915] <4>[ 462.597580] i915_vma_bind+0xdc/0x1c0 [i915] <4>[ 462.597986] i915_vma_pin_ww+0x435/0xb40 [i915] <4>[ 462.598395] ? make_obj_busy+0xcb/0x330 [i915] <4>[ 462.598786] make_obj_busy+0xcb/0x330 [i915] <4>[ 462.599180] ? 0xffffffff81000000 <4>[ 462.599187] ? debug_mutex_unlock+0x50/0xa0 <4>[ 462.599198] igt_mmap_offset_exhaustion+0x45f/0x4c0 [i915] <4>[ 462.599592] __i915_subtests.cold.7+0x42/0x92 [i915] <4>[ 462.600026] ? i915_perf_selftests+0x20/0x20 [i915] <4>[ 462.600422] ? __i915_nop_setup+0x10/0x10 [i915] <4>[ 462.600820] __run_selftests.part.3+0x10d/0x172 [i915] <4>[ 462.601253] i915_live_selftests.cold.5+0x1f/0x47 [i915] <4>[ 462.601686] i915_pci_probe+0x93/0x1d0 [i915] <4>[ 462.602037] ? _raw_spin_unlock_irqrestore+0x3d/0x60 <4>[ 462.602047] pci_device_probe+0x9e/0x110 <4>[ 462.602057] really_probe+0xea/0x410 <4>[ 462.602067] driver_probe_device+0xd9/0x140 <4>[ 462.602075] device_driver_attach+0x4a/0x50 <4>[ 462.602084] __driver_attach+0x83/0x140 <4>[ 462.602091] ? device_driver_attach+0x50/0x50 <4>[ 462.602099] ? device_driver_attach+0x50/0x50 <4>[ 462.602107] bus_for_each_dev+0x75/0xc0 <4>[ 462.602116] bus_add_driver+0x14b/0x1f0 <4>[ 462.602124] driver_register+0x66/0xb0 <4>[ 462.602133] i915_init+0x70/0x87 [i915] <4>[ 462.602453] ? 0xffffffffa0606000 <4>[ 462.602458] do_one_initcall+0x56/0x2e0 <4>[ 462.602466] ? kmem_cache_alloc_trace+0x374/0x430 <4>[ 462.602476] do_init_module+0x55/0x200 <4>[ 462.602484] load_module+0x2703/0x2990 <4>[ 462.602500] ? __do_sys_finit_module+0xad/0x110 <4>[ 462.602507] __do_sys_finit_module+0xad/0x110 <4>[ 462.602519] do_syscall_64+0x33/0x80 <4>[ 462.602527] entry_SYSCALL_64_after_hwframe+0x44/0xae <4>[ 462.602535] RIP: 0033:0x7fab69d8d89d Changes since v1: - Add lockdep annotations during init, to ensure that lockdep is primed. This also fixes a false positive when reading /proc/lockdep_stats during module reload. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210426102351.921874-1-maarten.lankhorst@linux.intel.comReviewed-by: NThomas Hellström <thomas.hellstrom@linux.intel.com>
-
- 27 4月, 2021 1 次提交
-
-
Determine the possible coherent map type based on object location, and if target has llc or if user requires an always coherent mapping. Cc: Matthew Auld <matthew.auld@intel.com> Cc: CQ Tang <cq.tang@intel.com> Suggested-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NVenkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: NMatthew Auld <matthew.auld@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-2-matthew.auld@intel.com
-
- 22 4月, 2021 1 次提交
-
-
由 CQ Tang 提交于
Add "REGION_STOLEN" device info to dg1, create stolen memory region from upper portion of local device memory, starting from DSMBASE. v2: - s/drm_info/drm_dbg; userspace likely doesn't care about stolen. - mem->type is only setup after the region probe, so setting the name as stolen-local or stolen-system based on this value won't work. Split system vs local stolen setup to fix this. - kill all the region->devmem/is_devmem stuff. We already differentiate the different types of stolen so such things shouldn't be needed anymore. v3: - split stolen lmem vs smem ops(Tvrtko) - add shortcut for stolen region in i915(Tvrtko) - sanity check dsm base vs bar size(Xinyun) v4(Tvrtko): - more cleanup - add some TODOs Signed-off-by: NCQ Tang <cq.tang@intel.com> Signed-off-by: NMatthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Xinyun Liu <xinyun.liu@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210421104658.304142-1-matthew.auld@intel.com
-
- 14 4月, 2021 5 次提交
-
-
由 Lucas De Marchi 提交于
Now that it's not being used anymore, finish its removal. Like for gen_mask, we replace INTEL_GEN() and IS_GEN() macros to use the new field. Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> [Jani: Minor code comment change while applying.] Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-11-lucas.demarchi@intel.com
-
由 Lucas De Marchi 提交于
Now that it's not used anywhere, remove it from struct intel_device_info. To allow a period in which code will be converted to the new macro, keep IS_GEN_RANGE() around, just redefining it to use the new fields. The size advantage from IS_GEN_RANGE() using a mask is not that big as it has pretty limited use througout the driver: text data bss dec hex filename 2758497 95965 6496 2860958 2ba79e drivers/gpu/drm/i915/i915.ko.old 2758586 95953 6496 2861035 2ba7eb drivers/gpu/drm/i915/i915.ko.new Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> [Jani: Minor code comment change while applying.] Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-9-lucas.demarchi@intel.com
-
由 Lucas De Marchi 提交于
Like it was done in commit 01eb15c9 ("drm/i915: Add DISPLAY_VER() and related macros") add the correspondent macros for graphics and media. Going forward we will prefer checking the versions for the specific IPs (graphics, media and display) rather than grouping everything under a "gen" version. For consistency and to make the maintenance easier, it'd be preferred not to mix the *GEN* macros with the new ones. For older platforms we can simply consider that the previous "gen" number will extend to all 3 IPs. Then we can start replacing its use in the driver. Right now this replacement is not done and only the infrastructure is put in place. We also leave gen and gen_mask inside struct intel_device_info while it's still being used throughout the code. v2: Repurpose IS_{GRAPHICS,MEDIA}_VER() macros to work with a range Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> [Jani: Minor code comment change while applying.] Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-5-lucas.demarchi@intel.com
-
由 Lucas De Marchi 提交于
While converting the rest of the driver to use GRAPHICS_VER() and MEDIA_VER(), following what was done for display, some discussions went back on what we did for display: 1) Why is the == comparison special that deserves a separate macro instead of just getting the version and comparing directly like is done for >, >=, <=? 2) IS_DISPLAY_RANGE() is weird in that it omits the "_VER" for brevity. If we remove the current users of IS_DISPLAY_VER(), we could actually repurpose it for a range check With (1) there could be an advantage if we used gen_mask since multiple conditionals be combined by the compiler in a single and instruction and check the result. However a) INTEL_GEN() doesn't use the mask since it would make the code bigger everywhere else and b) in the cases it made sense, it also made sense to convert to the _RANGE() variant. So here we repurpose IS_DISPLAY_VER() to work with a [ from, to ] range like was the IS_DISPLAY_RANGE() and convert the current IS_DISPLAY_VER() users to use == and != operators. Aside from the definition changes, this was done by the following semantic patch: @@ expression dev_priv, E1; @@ - !IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) != E1 @@ expression dev_priv, E1; @@ - IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) == E1 @@ expression dev_priv, from, until; @@ - IS_DISPLAY_RANGE(dev_priv, from, until) + IS_DISPLAY_VER(dev_priv, from, until) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> [Jani: Minor conflict resolve while applying.] Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-4-lucas.demarchi@intel.com
-
由 Lucas De Marchi 提交于
The macro we use to check is called DISPLAY_VER(). While using this macro and the new ones being added in following changes I made the mistake multiple times when mixing both "ver" and "version". Although it's usually better to prefer the complete name, the shorhand DISPLAY_VER() / GRAPHICS_VER / MEDIA_VER are clear and cause less visual polution. Another issue is when copying the variable to other places. "display.version" would be copied to a "display_version" variable which is long and would make people abbreviate as "version", or "display_ver". In the first case it's not always clear what version refers to, and in the second case it just hints it should be the name in the first place. So, in the same way use used "gen" rather than "generation", use "ver" instead of "version". Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Acked-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-3-lucas.demarchi@intel.com
-
- 29 3月, 2021 6 次提交
-
-
由 Jani Nikula 提交于
Matter of taste. Step matches the enums. Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1724c8bde0e0f596240437d72ace60b9c34ae9db.1616764798.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Matter of taste. STEP matches the enums. Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/cf2dccd1c9c7fdcf5de08ea10a9265292b45d8c7.1616764798.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
This changes the way revids not present in the array are handled: - For gaps in the array, the next present revid is used. - For revids beyond the array, the new STEP_FUTURE is used instead of the last revid in the array. In both cases, we'll get debug logging of what's going on. v2: Rename stepping->step Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/756fe3d75b1e91ef812fc1fd3f70337e9c571d91.1616764798.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Add new symbolic names for revision ids, and convert KBL revids to use them via the new stepping check macros. This also fixes theoretical out of bounds access to kbl_revids array. v3: upgrade dbg to warn on unknown revid (José) v2: Rename stepping->step Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/79b6c48211c6b214165391d350d556bad748f747.1616764798.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
Add new runtime info field for stepping. Add new helpers for accessing them. As we'll be switching platforms over to the new scheme incrementally, check for non-initialized steppings. In case a platform does not have separate display and gt steppings, it's okay to use a common shorthand. However, in this case the display stepping must not be initialized, and gt stepping is the single point of truth. v3: Remove IS_STEP() (José) v2: Rename stepping->step Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/bb4275733fa390ea3dbf6f62794d55b616665230.1616764798.git.jani.nikula@intel.com
-
由 Jani Nikula 提交于
gt/intel_workarounds.c is decidedly the wrong place for handling stepping info. Add new intel_step.[ch] for the data, and move the stepping arrays there. No functional changes. v2: Rename stepping->step Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f69baf82819a8a35815fca25a520de5c38a7e1b5.1616764798.git.jani.nikula@intel.com
-
- 25 3月, 2021 2 次提交
-
-
由 Tvrtko Ursulin 提交于
Commit 6ce1c33d ("drm/i915: Kill INTEL_SUBPLATFORM_AML") removed the only platform which used bit 2 so could also decrease the INTEL_SUBPLATFORM_BITS definition. This is not a fixes material but still lets make it precise. v2: * Fix assert in intel_device_info_subplatform_init by introducing INTEL_SUBPLATFORM_MASK. (Chris) * Update intel_subplatform(). Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> References: 6ce1c33d ("drm/i915: Kill INTEL_SUBPLATFORM_AML") Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20210121161936.746591-2-tvrtko.ursulin@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Maarten Lankhorst 提交于
Instead of doing what we do currently, which will never work with PROVE_LOCKING, do the same as AMD does, and something similar to relocation slowpath. When all locks are dropped, we acquire the pages for pinning. When the locks are taken, we transfer those pages in .get_pages() to the bo. As a final check before installing the fences, we ensure that the mmu notifier was not called; if it is, we return -EAGAIN to userspace to signal it has to start over. Changes since v1: - Unbinding is done in submit_init only. submit_begin() removed. - MMU_NOTFIER -> MMU_NOTIFIER Changes since v2: - Make i915->mm.notifier a spinlock. Changes since v3: - Add WARN_ON if there are any page references left, should have been 0. - Return 0 on success in submit_init(), bug from spinlock conversion. - Release pvec outside of notifier_lock (Thomas). Changes since v4: - Mention why we're clearing eb->[i + 1].vma in the code. (Thomas) - Actually check all invalidations in eb_move_to_gpu. (Thomas) - Do not wait when process is exiting to fix gem_ctx_persistence.userptr. Changes since v5: - Clarify why check on PF_EXITING is (temporarily) required. Changes since v6: - Ensure userptr validity is checked in set_domain through a special path. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: NDave Airlie <airlied@redhat.com> [danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the previous review round, but which got lost. The other open questions around page refcount are imo better discussed in a separate series, with amdgpu folks involved]. Reviewed-by: NThomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
-