Updated Kconfig & Makefiles in prep for adding support for the Freescale
MPC83xx family of processors to arch/powerpc.  Moved around some config
options that are more globally applicable to other PowerPC processors.
Added a temporary config option (83xx) to match existing arch/ppc support
for the MPC83xx line.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The SPE Book IV indicates that MFC DMA operations must be
suspended and restored on SPU context switch (in Step 8).

This patch adds that operation, which is missing from the
current spufs implementation.
Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Acked-by: NArnd Bergmann <arndb@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch fixes the compilation error (shown below) when CONFIG_SMP=n.
    arch/powerpc/kernel/crash.c: In function `crash_kexec_prepare_cpus':
    arch/powerpc/kernel/crash.c:236: error: implicit declaration of
    function `smp_release_cpus'
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We were getting elfcorehdr_addr undefined in this case.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The current ppc64 per cpu data implementation is quite slow. eg:

        lhz 11,18(13)           /* smp_processor_id() */
        ld 9,.LC63-.LCTOC1(30)  /* per_cpu__variable_name */
        ld 8,.LC61-.LCTOC1(30)  /* __per_cpu_offset */
        sldi 11,11,3            /* form index into __per_cpu_offset */
        mr 10,9
        ldx 9,11,8              /* __per_cpu_offset[smp_processor_id()] */
        ldx 0,10,9              /* load per cpu data */

5 loads for something that is supposed to be fast, pretty awful. One
reason for the large number of loads is that we have to synthesize 2
64bit constants (per_cpu__variable_name and __per_cpu_offset).

By putting __per_cpu_offset into the paca we can avoid the 2 loads
associated with it:

        ld 11,56(13)            /* paca->data_offset */
        ld 9,.LC59-.LCTOC1(30)  /* per_cpu__variable_name */
        ldx 0,9,11              /* load per cpu data

Longer term we can should be able to do even better than 3 loads.
If per_cpu__variable_name wasnt a 64bit constant and paca->data_offset
was in a register we could cut it down to one load. A suggestion from
Rusty is to use gcc's __thread extension here. In order to do this we
would need to free up r13 (the __thread register and where the paca
currently is). So far Ive had a few unsuccessful attempts at doing that :)

The patch also allocates per cpu memory node local on NUMA machines.
This patch from Rusty has been sitting in my queue _forever_ but stalled
when I hit the compiler bug. Sorry about that.

Finally I also only allocate per cpu data for possible cpus, which comes
straight out of the x86-64 port. On a pseries kernel (with NR_CPUS == 128)
and 4 possible cpus we see some nice gains:

             total       used       free     shared    buffers cached
Mem:       4012228     212860    3799368          0          0 162424

             total       used       free     shared    buffers cached
Mem:       4016200     212984    3803216          0          0 162424

A saving of 3.75MB. Quite nice for smaller machines. Note: we now have
to be careful of per cpu users that touch data for !possible cpus.

At this stage it might be worth making the NUMA and possible cpu
optimisations generic, but per cpu init is done so early we have to be
careful that all architectures have their possible map setup correctly.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This stops parport from accessing nonexistent parallel ports.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch adds Kconfig entries to control the early debugging options,
currently in setup_64.c.

Doing this via Kconfig rather than #defines means you can have one source tree,
which is buildable for multiple platforms - and you can enable the correct
early debug option for each platform via .config.

I made udbg_early_init() a static inline because otherwise GCC is to daft to
optimise it away when debugging is off.

Now that we have udbg_init_rtas() we can make call_rtas_display_status* static.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Connect iSeries up to the standard early debugging infrastructure.

To actually use this you need to enable the iSeries early debugging
in setup_64.c. Then after the messages are logged hit Ctrl-x Ctrl-x on
your console to dump the Hypervisor console buffer.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

remove remaining crash_notes definition to fix compile error

/dev/shm/linux-2.6/arch/powerpc/kernel/machine_kexec.c:21: error: conflicting types for `crash_notes'
/dev/shm/linux-2.6/include/linux/kexec.h:129: error: previous declaration of `crash_notes'
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The RPAPHP hoplug driver will not build as a module, because it calls
on a pcibios routine which is not exported. This exports the symbol.
Problem reported by Olaf Hering <olh@suse.de>
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Enable the RTC driver.
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mark mutex_lock() and mutex_lock_interruptible() as might_sleep()
functions.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Call the mutex slowpath more conservatively - e.g.  FRAME_POINTERS can
change the calling convention, in which case a direct branch to the
slowpath becomes illegal.  Bug found by Hugh Dickins.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove unnecessary (and incorrect) inclusion of asm/mutex.h, pointed out
by David Howells.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NBart De Schuymer <bdschuym@pandora.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jean-Luc Leger <reiga@dspnet.fr.eu.org> reported this alternative 
dependency on a non-existing symbol.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

EXPORT_SYMBOL's do nowadays belong to the files where the actual
functions are.

Moving the module_init/module_exit to the file with the actual functions
has the advantage of saving a few bytes due to the removal of two
functions.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NJean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Small cleanups for drivers/atm/zatm.c
 Get rid of unneeded cast of kmalloc() return value.
 Small whitespace/CodingStyle/formatting cleanup (since I was in there anyway).
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Get rid of needless casting of kmalloc() return value in net/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Decrease the number of pointer derefs in net/rxrpc/connection.c

Benefits of the patch:
 - Fewer pointer dereferences should make the code slightly faster.
 - Size of generated code is smaller
 - improved readability
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Martin Murray <murrayma@citi.umich.edu>

Sanity check nlmsg_len during netlink_rcv_skb.  An nlmsg_len == 0 can
cause infinite loop in kernel, effectively DoSing machine.  Noted by
Matin Murray.
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The connection tracking timeout variables are unsigned long, but
proc_dointvec_jiffies is used with sizeof(unsigned int) in the sysctl
tables. Since there is no proc_doulongvec_jiffies function, change the
timeout variables to unsigned int.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

->print and ->print_range are not used (and apparently never were).
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_nat_mangle_tcp_packet doesn't return NF_* values but 0/1 for
failure/success.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The PPTP NAT helper calculates the offset at which the packet needs
to be mangled as difference between two pointers to the header. With
non-linear skbs however the pointers may point to two seperate buffers
on the stack and the calculation results in a wrong offset beeing
used.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an inbound PPTP_IN_CALL_REQUEST packet is received the
PPTP NAT helper uses a NULL pointer in pointer arithmentic to
calculate the offset in the packet which needs to be mangled
and corrupts random memory or crashes.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't wrap entire file in #ifdef CONFIG_NETFILTER, remove a few
unneccessary includes.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This changes some memcmp(one,two,ETH_ALEN) to compare_ether_addr(one,two).
Signed-off-by: NKris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The congestion ops and af_ops in the inet_connection_sock
can be const.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This requires the proper capabilities for the moxa bios update ioctl's.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a5 register corruption when processing user space signals handlers.
We need to save a5 through each contenxt change.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We're starting a number of big applications (memory footprint app.
1MByte) on our Arcturus uC5272.  Therefore memory fragmentation is a
real pain for us.  We've switched to uClinux-2.4.27-uc1 and found that
page_alloc2 fragments the memory heavily.

Digging into it we found a bug in the find_next_zero_bit function in the
m68knommu/bitops.h file.  if the size isn't a multiple of 32 than the
upper bits of the last word to be searched should be masked.  But the
functions masks the lower bits of the last word because it uses a right
shift instead of a left shift operator.

Patch submitted by Sascha Smejkal <s.smejkal@centersystems.at>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Modify the initial trace output (which is based on flags in the binary
header) so that it is not done until after the magic number check.  This
may well not be a flat format binary, so the flags could be invalid.
(Prime example, running a script).

Changes prompted by patches from Stuart Hughs.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Set the hardware interrupt priority to a different value for each
attached ColdFire serial port.  According to the CPU documentation you
should not use the same combination of level/priority on more than one
device.  People have reported odd serial port behavior with them set the
same.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allow the ColdFire FEC ethernet driver to be enabled on the M520x CPU
family.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Adjust length of M5208EVB ram define.  It should size up to 32MB after
adding in the dBUG reserved 128k.

Problem pointed out be Milton Miller <miltonm@bga.com>.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a patch adapted from a posting by Andrea Tarani which was
pointed out to me by Bernardo Innocenti.  Thanks to both of them for
their help and patience.

The original posting is here:
  http://mailman.uclinux.org/pipermail/uclinux-dev/2005-July/033543.html

The problem first manifest itself as busybox ping terminating with an
"Illegal instruction".  I reduced this to a test case and found that
variable size arrays allocated on the stack could lead to stacks not
aligned on 32 bit boundaries.  For the Coldfire this proved fatal.

Having been pointed out this patch by Bernardo, I applied it and it
fixed the first test case.  I then went back to busybox's ping.  This
still failed with "Illegal instruction", but in a different way.  Before
it depended on the size allocated for the ping buffer, now it happened
every time.  I also found it depended on optimisation level (gcc-3.4.0)
-Os was okay but not -O2.

After a lot of looking, it turned out that register a5 was being
corrupted by the signal handler (after applying the patch).  I re-worked
the patch a bit to save/restore a5 and now all seems well.

Patch submitted by Stuart Hughs <stuarth@freescale.com>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>