- 02 4月, 2010 1 次提交
-
-
由 FUJITA Tomonori 提交于
acenic wrongly assumes that zero is an invalid dma address (calls dma_unmap_page for only non zero dma addresses). Zero is a valid dma address on some architectures. The dma length can be used here. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2010 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 3月, 2010 31 次提交
-
-
由 Hagen Paul Pfeifer 提交于
Remove duplicate declaration of symbol: struct hlist_node *node was already declared, the seconds declaration shadows the first one. CC: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NHagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hagen Paul Pfeifer 提交于
struct _zone *tipc_zones has local scope level and should defined with the correct scoping. CC: Per Liden <per.liden@nospam.ericsson.com> Signed-off-by: NHagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
eth_type_trans(skb, netdev) does the "skb->dev = netdev;" initialization, we can remove it from various network drivers. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marc Zyngier 提交于
Chip model can now be selected directly by matching the modalias name (instead of filling the .model field in platform_data), and allows the module to be auto-loaded. Previous behaviour is of course still supported. Convert the two in-tree users to this feature (icontrol & zeus). Tested on an Zeus platform (mcp2515). Signed-off-by: NMarc Zyngier <maz@misterjones.org> Acked-by: NChristian Pellegrin <chripell@fsfe.org> Cc: Edwin Peer <epeer@tmtservices.co.za> Acked-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 laurent chavey 提交于
Fix coding style errors and warnings output while running checkpatch.pl on the file net/core/dst.c. Signed-off-by: Nchavey <chavey@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
This adds ethtool and device feature flag to allow control of receive hashing offload. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nick Nunley 提交于
This patch adds support for per-packet timestamping for the 82580 adapter. The rx timestamp code is also pulled out of the inlined rx hotpath and instead moved to a seperate function. This version adds a comment explaining the per-packet timestamping code added to igb_hwtstamp_ioctl(). Signed-off-by: NNicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Some no longer valid IPG_DDEBUG_MSG uses are removed Validate IPG_DDEBUG_MSG arguments when not #defined Neaten #defines marco/macro typo correction Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
addr_bit_test() is used in various places in IPv6 routing table subsystem. It checks if the given fn_bit is set, where fn_bit counts bits from MSB in words in network-order. fn_bit : 0 .... 31 32 .... 64 65 .... 95 96 ....127 fn_bit >> 5 gives offset of word, and (~fn_bit & 0x1f) gives count from LSB in the network-endian word in question. fn_bit >> 5 : 0 1 2 3 ~fn_bit & 0x1f: 31 .... 0 31 .... 0 31 .... 0 31 .... 0 Thus, the mask was generated as htonl(1 << (~fn_bit & 0x1f)). This can be optimized by "sweezle" (See include/asm-generic/bitops/le.h). In little-endian, htonl(1 << bit) = 1 << (bit ^ BITOP_BE32_SWIZZLE) where BITOP_BE32_SWIZZLE is (0x1f & ~7) So, htonl(1 << (~fn_bit & 0x1f)) = 1 << ((~fn_bit & 0x1f) ^ (0x1f & ~7)) = 1 << ((~fn_bit ^ ~7) & 0x1f) = 1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f) In big-endian, BITOP_BE32_SWIZZLE is equal to 0. 1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f) = 1 << ((~fn_bit) & 0x1f) = htonl(1 << (~fn_bit & 0x1f)) Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Because we have ensured that the argument is non-zero, it is better to use __fls() and generate better code. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Here are the other miscellaneous corrections done by an earlier larger suggested patch now made unnecessary by a less invasive change. Correct a few missing newlines from logging messages and a typo fix. Fix speed/duplex logging message. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change updates the igb driver to make use of the netdev_dbg function macros now provided in netdevice.h This is meant to be provided as an alternative to the patch provided by Joe Perches. It also removes igb_get_time_str since I found that it is unused code that is no longer used even in debug. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Goff 提交于
These changes were suggested by Alexey Dobriyan <adobriyan@gmail.com>: - psched_show() does not use any private data so just pass NULL to psched_open() - remove unnecessary return statement Signed-off-by: NTom Goff <thomas.goff@boeing.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The Optima version has feature to detect link quickly without PHY interrupt, but it causes duplicate link up events. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Add definitions for Yukon XL revisions. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Need to change logic to support later versions of Yukon 2 EC_U chip. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Add CAIF Serial driver. This driver is implemented as a line discipline. caif_serial uses the following module parameters: ser_use_stx - specifies if STart of frame eXtension is in use. ser_loop - sets the interface in loopback mode. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Documentation of the CAIF Protocol. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Kconfig and Makefiles with options for: CAIF: Including caif CAIF_DEBUG: CAIF Debug CAIF_NETDEV: CAIF Network Device for GPRS Contexts Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Adding GPRS Net Device for PDP Contexts. The device can be managed by RTNL as defined in if_caif.h. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Implementation of CAIF sockets for protocol and address family PF_CAIF and AF_CAIF. CAIF socket is connection oriented implementing SOCK_SEQPACKET and SOCK_STREAM interface with supporting blocking and non-blocking mode. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Registration and deregistration of CAIF Link Layer. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Support functions for the caif protocol stack: cfcnfg.c - CAIF Configuration Module used for adding and removing drivers and connection cfpkt_skbuff.c - CAIF Packet layer (SKB helper functions) Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
CAIF generic protocol implementation. This layer is somewhat generic in order to be able to use and test it outside the Linux Kernel. cfctrl.c - CAIF control protocol layer cfdbgl.c - CAIF debug protocol layer cfdgml.c - CAIF datagram protocol layer cffrml.c - CAIF framing protocol layer cfmuxl.c - CAIF mux protocol layer cfrfml.c - CAIF remote file manager protocol layer cfserl.c - CAIF serial (fragmentation) protocol layer cfsrvl.c - CAIF generic service layer functions cfutill.c - CAIF utility protocol layer cfveil.c - CAIF AT protocol layer cfvidl.c - CAIF video protocol layer Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Header files for CAIF Link layer net-device, and link-layer registration. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Add include files for the CAIF Core protocol stack. caif_layer.h - Defines the structure of the CAIF protocol layers cfcnfg.h - CAIF Configuration Module for services and link layers cfctrl.h - CAIF Control Protocol Layer cffrml.h - CAIF Framing Layer cfmuxl.h - CAIF Muxing Layer cfpkt.h - CAIF Packet layer (skb helper functions) cfserl.h - CAIF Serial Layer cfsrvl.h - CAIF Service Layer Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Add CAIF types for Socket Address, Socket Options, and configuration parameters for the GPRS IP network interface. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Add CAIF definitions to existing header files. Files: if_arp.h, if_ether.h, socket.h. Types: ARPHRD_CAIF, ETH_P_CAIF, AF_CAIF, PF_CAIF, SOL_CAIF, N_CAIF Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shirley Ma 提交于
Add missing sg_init_table for sg_set_buf in virtio_net which induced in defer skb patch. Reported-by: NThomas Müller <thomas@mathtm.de> Tested-by: NThomas Müller <thomas@mathtm.de> Signed-off-by: NShirley Ma <xma@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2010 7 次提交
-
-
由 Sreenivasa Honnur 提交于
- updating Maintainer list of S2IO 10GbE drivers (xframe / vxge). Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Version update Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- For Normal function (MR-IOV disabled, SR-IOV disabled) Function-0 is the privilaged function. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Fixed MSIX interrupt configuration to support non contiguous vpaths in functions. Four msi-x vectors are reserved per vpath internal to the chip. In all, there are 68 msi-x vectors for the 17 vpaths in the chip. In the multi function configurations, non-contiguous vpaths are configured to represent a function. For instance vpaths 0 and 8 can be configured to represent function zero. - If pci_enable_msix fails for the requested vectors, try with a lesser number vectors by reducing the vpath count. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Fixed "ethtool -d" prints - reg_space pointer was getting over written, updating it correctly. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Align the memory only if it is misaligned. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Fix starvation of receive ring controller when blasted by short packets. This was because the driver was posting 64 rxds initially while the ring controller was expecting to read 256 replenished rxds. While the driver was coming up, the internal rxd memory filled up the 64 buffers provided and the ring controller was left waiting for the remaining 192 rxds to complete the write back of completed rxds to the host and generation of an interrupt. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-