This patch contains following things.

1) Limit the max size of btrfs_ordered_sum structure to PAGE_SIZE.  This
struct is kmalloced so we want to keep it reasonable.

2) Replace copy_extent_csums by btrfs_lookup_csums_range.  This was
duplicated code in tree-log.c

3) Remove replay_one_csum. csum items are replayed at the same time as
   replaying file extents. This guarantees we only replay useful csums.

4) nbytes accounting fix.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

There were many, most are fixed now.  struct-funcs.c generates some warnings
but these are bogus.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_insert_empty_items takes the space needed by the btrfs_item
structure into account when calculating the required free space.

So the tree balancing code shouldn't add sizeof(struct btrfs_item)
to the size when checking the free space. This patch removes these
superfluous additions.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

Btrfs maintains a cache of blocks available for allocation in ram.  The
code that frees extents was marking the extents free and then deleting
the checksum items.

This meant it was possible the extent would be reallocated before the
checksum item was actually deleted, leading to races and other
problems as the checksums were updated for the newly allocated extent.

The fix is to delete the checksum before marking the extent free.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Checksums on data can be disabled by mount option, so it's
possible some data extents don't have checksums or have
invalid checksums. This causes trouble for data relocation.
This patch contains following things to make data relocation
work.

1) make nodatasum/nodatacow mount option only affects new
files. Checksums and COW on data are only controlled by the
inode flags.

2) check the existence of checksum in the nodatacow checker.
If checksums exist, force COW the data extent. This ensure that
checksum for a given block is either valid or does not exist.

3) update data relocation code to properly handle the case
of checksum missing.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

This finishes off the new checksumming code by removing csum items
for extents that are no longer in use.

The trick is doing it without racing because a single csum item may
hold csums for more than one extent.  Extra checks are added to
btrfs_csum_file_blocks to make sure that we are using the correct
csum item after dropping locks.

A new btrfs_split_item is added to split a single csum item so it
can be split without dropping the leaf lock.  This is used to
remove csum bytes from the middle of an item.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs stores checksums for each data block.  Until now, they have
been stored in the subvolume trees, indexed by the inode that is
referencing the data block.  This means that when we read the inode,
we've probably read in at least some checksums as well.

But, this has a few problems:

* The checksums are indexed by logical offset in the file.  When
compression is on, this means we have to do the expensive checksumming
on the uncompressed data.  It would be faster if we could checksum
the compressed data instead.

* If we implement encryption, we'll be checksumming the plain text and
storing that on disk.  This is significantly less secure.

* For either compression or encryption, we have to get the plain text
back before we can verify the checksum as correct.  This makes the raid
layer balancing and extent moving much more expensive.

* It makes the front end caching code more complex, as we have touch
the subvolume and inodes as we cache extents.

* There is potentitally one copy of the checksum in each subvolume
referencing an extent.

The solution used here is to store the extent checksums in a dedicated
tree.  This allows us to index the checksums by phyiscal extent
start and length.  It means:

* The checksum is against the data stored on disk, after any compression
or encryption is done.

* The checksum is stored in a central location, and can be verified without
following back references, or reading inodes.

This makes compression significantly faster by reducing the amount of
data that needs to be checksummed.  It will also allow much faster
raid management code in general.

The checksums are indexed by a key with a fixed objectid (a magic value
in ctree.h) and offset set to the starting byte of the extent.  This
allows us to copy the checksum items into the fsync log tree directly (or
any other tree), without having to invent a second format for them.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch gives us the space we will need in order to have different csum
algorithims at some point in the future.  We save the csum algorithim type
in the superblock, and use those instead of define's.
Signed-off-by: NJosef Bacik <jbacik@redhat.com>

With all the recent fixes to the delalloc locking, it is now safe
again to use invalidatepage inside the writepage code for
pages outside of i_size.  This used to deadlock against some of the
code to write locked ranges of pages, but all of that has been fixed.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This is a large change for adding compression on reading and writing,
both for inline and regular extents.  It does some fairly large
surgery to the writeback paths.

Compression is off by default and enabled by mount -o compress.  Even
when the -o compress mount option is not used, it is possible to read
compressed extents off the disk.

If compression for a given set of pages fails to make them smaller, the
file is flagged to avoid future compression attempts later.

* While finding delalloc extents, the pages are locked before being sent down
to the delalloc handler.  This allows the delalloc handler to do complex things
such as cleaning the pages, marking them writeback and starting IO on their
behalf.

* Inline extents are inserted at delalloc time now.  This allows us to compress
the data before inserting the inline extent, and it allows us to insert
an inline extent that spans multiple pages.

* All of the in-memory extent representations (extent_map.c, ordered-data.c etc)
are changed to record both an in-memory size and an on disk size, as well
as a flag for compression.

From a disk format point of view, the extent pointers in the file are changed
to record the on disk size of a given extent and some encoding flags.
Space in the disk format is allocated for compression encoding, as well
as encryption and a generic 'other' field.  Neither the encryption or the
'other' field are currently used.

In order to limit the amount of data read for a single random read in the
file, the size of a compressed extent is limited to 128k.  This is a
software only limit, the disk format supports u64 sized compressed extents.

In order to limit the ram consumed while processing extents, the uncompressed
size of a compressed extent is limited to 256k.  This is a software only limit
and will be subject to tuning later.

Checksumming is still done on compressed extents, and it is done on the
uncompressed version of the data.  This way additional encodings can be
layered on without having to figure out which encoding to checksum.

Compression happens at delalloc time, which is basically singled threaded because
it is usually done by a single pdflush thread.  This makes it tricky to
spread the compression load across all the cpus on the box.  We'll have to
look at parallel pdflush walks of dirty inodes at a later time.

Decompression is hooked into readpages and it does spread across CPUs nicely.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

This optimization had been removed because I thought it was triggering
csum errors.  The real cause of the errors was elsewhere, and so
this optimization is back.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This takes the csum mutex deeper in the call chain and releases it
more often.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Large streaming reads make for large bios, which means each entry on the
list async work queues represents a large amount of data.  IO
congestion throttling on the device was kicking in before the async
worker threads decided a single thread was busy and needed some help.

The end result was that a streaming read would result in a single CPU
running at 100% instead of balancing the work off to other CPUs.

This patch also changes the pre-IO checksum lookup done by reads to
work on a per-bio basis instead of a per-page.  This results in many
extra btree lookups on large streaming reads.  Doing the checksum lookup
right before bio submit allows us to reuse searches while processing
adjacent offsets.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The memory reclaiming issue happens when snapshot exists. In that
case, some cache entries may not be used during old snapshot dropping,
so they will remain in the cache until umount.

The patch adds a field to struct btrfs_leaf_ref to record create time. Besides,
the patch makes all dead roots of a given snapshot linked together in order of
create time. After a old snapshot was completely dropped, we check the dead
root list and remove all cache entries created before the oldest dead root in
the list.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

It was possible for stale mappings from disk to be used instead of the
new pending ordered extent.  This adds a flag to the extent map struct
to keep it pinned until the pending ordered extent is actually on disk.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Data checksumming is done right before the bio is sent down the IO stack,
which means a single bio might span more than one ordered extent.  In
this case, the checksumming data is split between two ordered extents.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The old data=ordered code would force commit to wait until
all the data extents from the transaction were fully on disk.  This
introduced large latencies into the commit and stalled new writers
in the transaction for a long time.

The new code changes the way data allocations and extents work:

* When delayed allocation is filled, data extents are reserved, and
  the extent bit EXTENT_ORDERED is set on the entire range of the extent.
  A struct btrfs_ordered_extent is allocated an inserted into a per-inode
  rbtree to track the pending extents.

* As each page is written EXTENT_ORDERED is cleared on the bytes corresponding
  to that page.

* When all of the bytes corresponding to a single struct btrfs_ordered_extent
  are written, The previously reserved extent is inserted into the FS
  btree and into the extent allocation trees.  The checksums for the file
  data are also updated.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Add a new ioctl to clone file data
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This significantly improves streaming write performance by allowing
concurrency in the data checksumming.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

When we checkum file data during writepage, the checksumming is done one
page at a time, making it difficult to do bulk metadata modifications
to insert checksums for large ranges of the file at once.

This patch changes btrfs to checksum on a per-bio basis instead.  The
bios are checksummed before they are handed off to the block layer, so
each bio is contiguous and only has pages from the same inode.

Checksumming on a bio basis allows us to insert and modify the file
checksum items in large groups.  It also allows the checksumming to
be done more easily by async worker threads.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

The fixes do a number of things:

1) Most btrfs_drop_extent callers will try to leave the inline extents in
place.  It can truncate bytes off the beginning of the inline extent if
required.

2) writepage can now update the inline extent, allowing mmap writes to
go directly into the inline extent.

3) btrfs_truncate_in_transaction truncates inline extents

4) extent_map.c fixed to not merge inline extent mappings and hole
mappings together
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Execution should goto label 'insert' when 'btrfs_next_leaf' return a
non-zero value, otherwise the parameter 'slot' for
'btrfs_item_key_to_cpu' may be out of bounds. The original codes jump
to  label 'insert' only when 'btrfs_next_leaf' return a negative
value.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This reduces the number of calls to btrfs_extend_item and greatly lowers
the cpu usage while writing large files.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Almost none of the files including module.h need to do so,
remove them.

Include sched.h in extent-tree.c to silence a warning about cond_resched()
being undeclared.
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Attaching below is some of the code cleanups that i came across while
reading the code.

a) alloc_path already calls init_path.
b) Mention that btrfs_inode is the in memory copy.Ext4 have ext4_inode_info as
the in memory copy ext4_inode as the disk copy
Signed-off-by: NChris Mason <chris.mason@oracle.com>