Set short slot also for 6 GHz band, just like 5 GHz.
Signed-off-by: NTova Mussai <tova.mussai@intel.com>
Link: https://lore.kernel.org/r/20200528213443.75f38e6f5efd.I272fbae402b03123f04e9ae69204eeab960c70cd@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Treat it like the 5 GHz band.
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Link: https://lore.kernel.org/r/20200528213443.889e5c9dd006.Id8ed3bb8000ba8738be5df05639415eb2e23c61a@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

On 6 GHz, stations don't have ht_supported set, but they can
still do aggregation since they must have HE, allow that.

Link: https://lore.kernel.org/r/20200528213443.776d3c891b64.Ifa099d450617b50c691832b3c4aa08959fab520a@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

On 6 GHz band, HE capabilities must be available for all of
the interface types, otherwise we shouldn't use 6 GHz. Check
this.

Link: https://lore.kernel.org/r/20200528213443.5881cb3c8c4a.I583b54172f91f98d44af64a16c5826fe458cbb27@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

On the 6 GHz band, HE should be used, but without any direct HT/VHT
capabilities, instead the HE 6 GHz band capabilities will capture
the relevant information. Reject HT/VHT capabilities here.

Link: https://lore.kernel.org/r/20200528213443.bfe89c35459a.Ibba5e066fa0087fd49d13cfee89d196ea0c68ae2@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

If a 6 GHz channel exists, then we can probably safely assume that
the device actually supports it, and then it should support most
bandwidths.

This will probably need to be extended to check the interface type
and then dig into the HE capabilities for that though, to have the
correct bandwidth check.

Link: https://lore.kernel.org/r/20200528213443.d4864ef52e92.I82f09b2b14a56413ce20376d09967fe954a033eb@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

On 6 GHz, the 6 GHz capabilities element should be added, do that.
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
[add commit message]
Link: https://lore.kernel.org/r/20200528213443.8ee764f0cde0.I2b0c66b60e11818c97c9803e04a6a197c6376243@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

In order to handle 6 GHz AP side, take the HE 6 GHz band capability
data and pass it to the driver (which needs it for A-MPDU spacing
and A-MPDU length).

Link: https://lore.kernel.org/r/1589399105-25472-6-git-send-email-rmanohar@codeaurora.orgCo-developed-by: NRajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: NRajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/20200528213443.784e4890d82f.I5f1230d5ab27e84e7bbe88e3645b24ea15a0c146@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

An AP supporting EMA (Enhanced Multi-BSSID advertisement) should set
bit 83 in the extended capabilities IE (9.4.2.26 in the 802.11ax D5 spec).
So the *3rd* bit of the 10th byte should be checked.
Also, in one place, the wrong byte was checked.
(cfg80211_find_ie returns a pointer to the beginning of the IE,
 so the data really starts at ie[2], so the 10th byte
 should be ie[12]. To avoid this confusion, use cfg80211_find_elem
 instead).
Signed-off-by: NShaul Triebitz <shaul.triebitz@intel.com>
Link: https://lore.kernel.org/r/20200528213443.4316121fa2a3.I9745582f8d41ad8e689dac0fefcd70b276d7c1ea@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Support connecting to HE 6 GHz APs and mesh networks on 6 GHz,
where the HT/VHT information is missing but instead the HE 6 GHz
band capability is present, and the 6 GHz Operation information
field is used to encode the channel configuration instead of the
HT/VHT operation elements.

Also add some other bits needed to connect to 6 GHz networks.

Link: https://lore.kernel.org/r/1589399105-25472-10-git-send-email-rmanohar@codeaurora.orgCo-developed-by: NRajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: NRajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/20200528213443.25687d2695bc.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

If the AP advertises inconsistent data, namely it has CCFS1 or CCFS2,
but doesn't advertise support for 160/80+80 bandwidth or "Extended NSS
BW Support", then we cannot use any MCSes in the the higher bandwidth.
Thus, avoid connecting with higher bandwidth since it's less efficient
that way.

Link: https://lore.kernel.org/r/20200528213443.0e55d40c3ccc.I6fd0b4708ebd087e5e46466c3e91f6efbcbef668@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

As HT/VHT elements are not allowed in 6 GHz band, do not include
them in mesh beacon template formation.
Signed-off-by: NRajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1589399105-25472-9-git-send-email-rmanohar@codeaurora.org
Link: https://lore.kernel.org/r/20200528193455.76796-2-johannes@sipsolutions.netSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add 6 GHz operation information (IEEE 802.11ax/D6.0, Figure 9-787k)
while building HE operation element for non-HE AP. This field is used to
determine channel information in the absence of HT/VHT IEs.
Signed-off-by: NRajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1589399105-25472-8-git-send-email-rmanohar@codeaurora.org
[fix skb allocation size]
Link: https://lore.kernel.org/r/20200528193455.76796-1-johannes@sipsolutions.netSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Construct HE 6 GHz band capability element (IEEE 802.11ax/D6.0,
9.4.2.261) for association request and mesh beacon. The 6 GHz
capability information is passed by driver through iftypes caps.
Signed-off-by: NRajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1589399105-25472-7-git-send-email-rmanohar@codeaurora.org
[handle SMPS, adjust for previous patches, reserve SKB space properly,
 change to handle SKB directly]
Link: https://lore.kernel.org/r/20200528213443.643aa8101111.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

These capabilities cover what would otherwise be transported
in HT/VHT capabilities, but only a subset thereof that is
actually needed on 6 GHz with HE already present. Expose the
capabilities to userspace, drivers are expected to set them
as using the 6 GHz band (currently) requires HE capability.

Link: https://lore.kernel.org/r/20200528213443.244cd5cb9db8.Icd8c773277a88c837e7e3af1d4d1013cc3b66543@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Handle 6 GHz band capability element parsing for association.
Signed-off-by: NRajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1589399105-25472-4-git-send-email-rmanohar@codeaurora.org
[some renaming to be in line with previous patches]
Link: https://lore.kernel.org/r/20200528213443.a13d7a0b85b0.Ia07584da4fc77aa77c4cc563248d2ce4234ffe5d@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Handle 6 GHz HE capability while adding new station. It will be used
later in mac80211 station processing.
Signed-off-by: NRajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1589399105-25472-2-git-send-email-rmanohar@codeaurora.org
[handle nl80211_set_station, require WME,
 remove NL80211_HE_6GHZ_CAPABILITY_LEN]
Link: https://lore.kernel.org/r/20200528213443.b6b711fd4312.Ic9b97d57b6c4f2b28d4b2d23d2849d8bc20bd8cc@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add the HE extended element IDs and the definitions for the
HE 6 GHz band capabilities element, from Draft 5.0.

Link: https://lore.kernel.org/r/20200528213443.1a6689fe093f.Ifdc5400fb01779351354daf38663ebeea03c9ad9@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add some code to obtain and parse the 6 GHz operation field
inside the HE operation element.

While at it, fix the required length using sizeof() the new
struct, which is 5 instead of 4 now.

Link: https://lore.kernel.org/r/20200528213443.42ca72c45ca9.Id74bc1b03da9ea6574f9bc70deeb60dfc1634359@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add the necessary definitions to parse reduced neighbor
report elements.
Signed-off-by: NTova Mussai <tova.mussai@intel.com>
[change struct name, remove IEEE80211_MIN_AP_NEIGHBOR_INFO_SIZE]
Link: https://lore.kernel.org/r/20200528213443.4f9154461c06.I518d9898ad982f838112ea9ca14a20d6bbb16394@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This allows identifying whether or not a channel is a PSC
(preferred scanning channel).

Link: https://lore.kernel.org/r/20200528213443.414363ecf62c.Ic15e681a0e249eab7350a06ceb582cca8bb9a080@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

My previous commit here was wrong, it didn't check the new
flag in two necessary places, so things didn't work. Fix that.

Fixes: 155d7c73 ("nl80211: allow client-only BIGTK support")
Link: https://lore.kernel.org/r/20200528213443.993f108e96ca.I0086ae42d672379380d04ac5effb2f3d5135731b@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The 6GHz band does not have regulatory approval yet, but things are
moving forward. However, that has led to a change in the channelization
of the 6GHz band which has been accepted in the 11ax specification. It
also fixes a missing MHZ_TO_KHZ() macro for 6GHz channels while at it.

This change is primarily thrown in to discuss how to deal with it.
I noticed ath11k adding 6G support with old channelization and ditto
for iw. It probably involves changes in hostapd as well.

Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Cc: Jouni Malinen <jouni@w1.fi>
Signed-off-by: NArend van Spriel <arend.vanspriel@broadcom.com>
Link: https://lore.kernel.org/r/edf07cdd-ad15-4012-3afd-d8b961a80b69@broadcom.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The updates to change to kHz frequencies and the 6 GHz
additions evidently overlapped (or rather, I didn't see
it when applying the latter), so the 6 GHz is broken.
Fix this.

Fixes: 934f4c7d ("cfg80211: express channels with a KHz component")
Link: https://lore.kernel.org/r/20200529140425.1bf824f6911b.I4a1174916b8f5965af4366999eb9ffc7a0347470@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add support for TX status reporting for the control port
TX API; this will be used by hostapd when it moves to the
control port TX API.
Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200527160334.19224-1-markus.theil@tu-ilmenau.de
[fix commit message, it was referring to nl80211]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Signed-off-by: NRamon Fontes <ramonreisfontes@gmail.com>
Link: https://lore.kernel.org/r/20200515164640.97276-1-ramonreisfontes@gmail.com
[fix indentation to use tabs]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If we receive management frames with an HT-Control field, we cannot
parse them properly, as we assume a fixed length management header.

Since we don't even need the HTC field (for these frames, or really
at all), just remove it at the beginning of RX.
Reported-by: NHaggai Abramovsky <haggai.abramovsky@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200526143346.cf5ce70521c5.I333251a084ec4cfe67b7ef7efe2d2f1a33883931@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

When compiling inside the kernel include linux/stddef.h instead of
stddef.h. When I compile this header file in backports for power PC I
run into a conflict with ptrdiff_t. I was unable to reproduce this in
mainline kernel. I still would like to fix this problem in the kernel.

Fixes: 6989310f ("wireless: Use offsetof instead of custom macro.")
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20200521201422.16493-1-hauke@hauke-m.deSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Back with commit c8c240e2 (cfg80211: reg: remove support for
built-in regdb, 2015-10-15), support for using CFG80211_INTERNAL_REGDB
was removed in favor of loading the regulatory database as firmware
file. The documentation of CFG80211_CRDA_SUPPORT was not adjusted,
though, which is why it still mentions mentions the old way of loading
via the internal regulatory database.

Remove it so that the kernel option only mentions using the firmware
file.
Signed-off-by: NPatrick Steinhardt <ps@pks.im>
Link: https://lore.kernel.org/r/c56e60207fbd0512029de8c6276ee00f73491924.1589732954.git.ps@pks.imSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds support to configure per TID Tx Rate configuration
through NL80211_TID_CONFIG_ATTR_TX_RATE* attributes. And it uses
nl80211_parse_tx_bitrate_mask api to validate the Tx rate mask.
Signed-off-by: NTamizh Chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1589357504-10175-1-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

As discussed with Mathy almost two years ago in
http://lore.kernel.org/r/20180806224857.14853-1-Mathy.Vanhoef@cs.kuleuven.be
we should let userspace process SA-QUERY frames if it
wants to, so that it can handle OCV (operating channel
validation) which mac80211 doesn't know how to.

Evidently I had been expecting Mathy to (re)send such a
patch, but he never did, perhaps expecting me to do it
after our discussion.

In any case, this came up now with OCV getting more
attention, so move the code around as discussed there
to let userspace handle it, and do it properly.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200526103131.1f9cf7e5b6db.Iae5b42b09ad2b1cbcbe13492002c43f0d1d51dfc@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This adds the necessary capabilities in nl80211 to allow drivers to
assign a cookie to control port TX frames (returned via extack in
the netlink ACK message of the command) and then later report the
frame's status.
Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200508144202.7678-2-markus.theil@tu-ilmenau.de
[use extack cookie instead of explicit message, recombine patches]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200507185907.GA15102@embeddedorSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200507183909.GA12993@embeddedorSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add IEEE80211_HE_VHT_MAX_AMPDU_FACTOR and IEEE80211_HE_HT_MAX_AMPDU_FACTOR
as per spec to use for peer max ampdu factor.
Signed-off-by: NTamizh Chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1588611900-21185-1-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

These are found in IEEE-802.11ah-2016.
Signed-off-by: NThomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200430172554.18383-5-thomas@adapt-ip.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

If the driver advertises NL80211_EXT_FEATURE_SCAN_FREQ_KHZ
userspace can omit NL80211_ATTR_SCAN_FREQUENCIES in favor
of an NL80211_ATTR_SCAN_FREQ_KHZ. To get scan results in
KHz userspace must also set the
NL80211_SCAN_FLAG_FREQ_KHZ.

This lets nl80211 remain compatible with older userspaces
while not requring and sending redundant (and potentially
incorrect) scan frequency sets.
Signed-off-by: NThomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200430172554.18383-4-thomas@adapt-ip.com
[use just nla_nest_start() (not _noflag) for NL80211_ATTR_SCAN_FREQ_KHZ]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

cfg80211 recently gained the ability to understand a
frequency offset component in KHz. Expose this in nl80211
through the new attributes NL80211_ATTR_WIPHY_FREQ_OFFSET,
NL80211_FREQUENCY_ATTR_OFFSET,
NL80211_ATTR_CENTER_FREQ1_OFFSET, and
NL80211_BSS_FREQUENCY_OFFSET.

These add support to send and receive a KHz offset
component with the following NL80211 commands:

- NL80211_CMD_FRAME
- NL80211_CMD_GET_SCAN
- NL80211_CMD_AUTHENTICATE
- NL80211_CMD_ASSOCIATE
- NL80211_CMD_CONNECT

Along with any other command which takes a chandef, ie:

- NL80211_CMD_SET_CHANNEL
- NL80211_CMD_SET_WIPHY
- NL80211_CMD_START_AP
- NL80211_CMD_RADAR_DETECT
- NL80211_CMD_NOTIFY_RADAR
- NL80211_CMD_CHANNEL_SWITCH
- NL80211_JOIN_IBSS
- NL80211_CMD_REMAIN_ON_CHANNEL
- NL80211_CMD_JOIN_OCB
- NL80211_CMD_JOIN_MESH
- NL80211_CMD_TDLS_CHANNEL_SWITCH

If the driver advertises a band containing channels with
frequency offset, it must also verify support for
frequency offset channels in its cfg80211 ops, or return
an error.
Signed-off-by: NThomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200430172554.18383-3-thomas@adapt-ip.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Drivers may wish to report the RX frequency in units of
KHz. Provide cfg80211_rx_mgmt_khz() and wrap it with
cfg80211_rx_mgmt() so exisiting drivers which can't report
KHz anyway don't need to change. Add a similar wrapper for
cfg80211_report_obss_beacon() so the frequency units stay
somewhat consistent.

This doesn't actually change the nl80211 API yet.
Signed-off-by: NThomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200430172554.18383-2-thomas@adapt-ip.com
[fix mac80211 calling the non-khz version of obss beacon report,
 drop trace point name changes]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Current rule for applying TID configuration for specific peer looks overly
complicated. No need to reject new TID configuration when override flag is
specified. Another call with the same TID configuration, but without
override flag, allows to apply new configuration anyway.

Use the same approach as for the 'all peers' case: if override flag is
specified, then reset existing TID configuration and immediately
apply a new one.
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200424112905.26770-5-sergey.matyukevich.os@quantenna.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>