It's under CONFIG_IP_VS_LBLCR_DEBUG option which never existed.
Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The file /proc/net/if_inet6 is removed twice.
First time in:
        inet6_exit
             ->addrconf_cleanup
And followed a few lines after by:
        inet6_exit
             -> if6_proc_exit
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a network namespace reference is held by a network subsystem,
and when this reference is decremented in a rcu update callback, we
must ensure that there is no more outstanding rcu update before
trying to free the network namespace.

In the normal case, the rcu_barrier is called when the network namespace
is exiting in the cleanup_net function.

But when a network namespace creation fails, and the subsystems are
undone (like the cleanup), the rcu_barrier is missing.

This patch adds the missing rcu_barrier.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Point 1:
The unregistering of a network device schedule a netdev_run_todo.
This function calls dev->destructor when it is set and the
destructor calls free_netdev.

Point 2:
In the case of an initialization of a network device the usual code
is:
 * alloc_netdev
 * register_netdev
    -> if this one fails, call free_netdev and exit with error.

Point 3:
In the register_netdevice function at the later state, when the device
is at the registered state, a call to the netdevice_notifiers is made.
If one of the notification falls into an error, a rollback to the
registered state is done using unregister_netdevice.

Conclusion:
When a network device fails to register during initialization because
one network subsystem returned an error during a notification call
chain, the network device is freed twice because of fact 1 and fact 2.
The second free_netdev will be done with an invalid pointer.

Proposed solution:
The following patch move all the code of unregister_netdevice *except*
the call to net_set_todo, to a new function "rollback_registered".

The following functions are changed in this way:
 * register_netdevice: calls rollback_registered when a notification fails
 * unregister_netdevice: calls rollback_register + net_set_todo, the call
                         order to net_set_todo is changed because it is the
                         latest now. Since it justs add an element to a list
                         that should not break anything.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix links to files in Documentation/* in various Kconfig files
Signed-off-by: NDirk Hohndel <hohndel@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit commit 65b8291c ("dio: invalidate
clean pages before dio write") introduced a bug which stopped dio from
ever invalidating the page cache after writes.  It still invalidated it
before writes so most users were fine.

Karl Schendel reported ( http://lkml.org/lkml/2007/10/26/481 ) hitting
this bug when he had a buffered reader immediately reading file data
after an O_DIRECT wirter had written the data.  The kernel issued
read-ahead beyond the position of the reader which overlapped with the
O_DIRECT writer.  The failure to invalidate after writes caused the
reader to see stale data from the read-ahead.

The following patch is originally from Karl.  The following commentary
is his:

	The below 3rd try takes on your suggestion of just invalidating
	no matter what the retval from the direct_IO call.  I ran it
	thru the test-case several times and it has worked every time.
	The post-invalidate is probably still too early for async-directio,
	but I don't have a testcase for that;  just sync.  And, this
	won't be any worse in the async case.

I added a test to the aio-dio-regress repository which mimics Karl's IO
pattern.  It verifed the bad behaviour and that the patch fixed it.  I
agree with Karl, this still doesn't help the case where a buffered
reader follows an AIO O_DIRECT writer.  That will require a bit more
work.

This gives up on the idea of returning EIO to indicate to userspace that
stale data remains if the invalidation failed.
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Cc: Karl Schendel <kschendel@datallegro.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Leonid Ananiev <leonid.i.ananiev@linux.intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix incorrect return value from ia64_setup_msi_irq()
  [IA64] arch/ia64/sn/kernel/mca.c: undo lock when sn_oemdata can't be extended
  [IA64] update sn2 defconfig to 64kb pages
  [IA64] fix typo in per_cpu_offset
  [IA64] /proc/cpuinfo "physical id" field cleanups
  [IA64] vDSO vs --build-id
  [IA64] check-segrel.lds vs --build-id
  [IA64] vmcore_find_descriptor_size should be in __init
  [IA64] ia64/mm/init.c: fix section mismatches

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  ixgb: fix TX hangs under heavy load
  e1000e: Fix typo ! &
  ixgbe: minor sparse fixes
  e1000: sparse warnings fixes
  ixgb: fix sparse warnings
  e1000e: fix sparse warnings
  mv643xx_eth: Fix MV643XX_ETH offsets used by Pegasos 2
  Blackfin EMAC driver: Fix Ethernet communication bug (dupliated and lost packets)
  DM9601: Support for ADMtek ADM8515 NIC

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: implement and use ATA_QCFLAG_QUIET
  libata: stop being overjealous about non-IO commands
  libata: flush is an IO command
  sata_promise: cleanups
  sata_promise: ASIC PRD table bug workaround, take 2

A merge error occurred where we merged the wrong block here
in version 1.0.120. The right condition for frags is slightly
different then for the skb, so account for the difference properly
and trim the TSO based size right.

Originally part of a fix reported by IBM to fix TSO hangs on
pSeries hardware.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Make strings const if possible, and fix includes so forward definitions
are seen.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix sparse warnings and problems from e1000 driver.

Added a sparse fix for the module param array index
-- Auke
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix sparse warnings in ixgb driver for net-2.6.24.

Added a sparse fix for invalid declaration using non-constant value
in ixgb_set_multi. Added a fix for the module param array index
and allows int params in the array. --Auke
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix sparse warnings from e1000e driver in net-2.6.24.

Added a sparse fix for module param arrays which can have int values
but only the array index needs to be unsigned. --Auke
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

In the mv643xx_eth driver, we now use offsets from the ethernet
register block within the chip, but the pegasos 2 platform still
needs offsets from the full chip's register base address.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix Ethernet communication bug(dupliated and lost packets)
in RMII PHY mode- dont call mac_disable and mac_enable during
10/100 REFCLK changes - mac_enable screws up the DMA descriptor chain
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add device ID for the ADMtek ADM8515 USB NIC to the DM9601 driver.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix the problem that pci_enable_msi() fails on ia64 platform. The cause of
this problem is incorrect return value of ia64_setup_msi_irq(). It must
return 0 on success, instead of irq number.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

It's currently possible to send posix_locks_deadlock() into an infinite
loop (under the BKL).

For now, fix this just by bailing out after a few iterations.  We may
want to fix this in a way that better clarifies the semantics of
deadlock detection.  But that will take more time, and this minimal fix
is probably adequate for any realistic scenario, and is simple enough to
be appropriate for applying to stable kernels now.

Thanks to George Davis for reporting the problem.

Cc: "George G. Davis" <gdavis@mvista.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: use a less common define name in BF549
  Blackfin arch: Add missing definitions for BF561
  Blackfin arch: reclaim a few bytes from the end of our init section
  Blackfin arch: fix libata data struct member from irq_type to irq_flags
  Blackfin arch: Do not pollute name space used in linux-2.6.x/sound
  Blackfin arch: Fix bug set correct baud for spi mmc and enable SPI after DMA.
  Blackfin arch: update board defconfig files according to latest information from ADI datasheet
  Blackfin arch: ensure that speculative loads of bad pointers don't cause us to do bad things.
  Blackfin arch: Add missing definitions of BF54x
  Blackfin arch: Fix random crash issue found by Michael.
  Blackfin arch: fix bug: tell users if the kernel is recovering from a fault condition
  Blackfin arch: add support for checking/clearing overruns in generic purpose Timer API
  Blackfin arch: cleanup arch/blackfin/kernel/traps.c handling code.
  Blackfin arch: Apply Bluetchnix vendor patch provided by Harald Krapfenbauer
  Blackfin arch: fix bug BlueTechnix CM-BF537 board config uses wrong IRQ for net2272 driver
  Blackfin arch: fix bug: kernel prints out error message twice
  Blackfin arch: add NFC driver support in BF527-EZKIT board
  Blackfin arch: Added support for HV Sistemas H8606 board

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  [TIPC]: Add tipc_config.h to include/linux/Kbuild.
  [WAN]: lmc_ioctl: don't return with locks held
  [SUNRPC]: fix rpc debugging
  [TCP]: Saner thash_entries default with much memory.
  [SUNRPC] rpc_rdma: we need to cast u64 to unsigned long long for printing
  [IPv4] SNMP: Refer correct memory location to display ICMP out-going statistics
  [NET]: Fix error reporting in sys_socketpair().
  [NETFILTER]: nf_ct_alloc_hashtable(): use __GFP_NOWARN
  [NET]: Fix race between poll_napi() and net_rx_action()
  [TCP] MD5: Remove some more unnecessary casting.
  [TCP] vegas: Fix a bug in disabling slow start by gamma parameter.
  [IPVS]: use proper timeout instead of fixed value
  [IPV6] NDISC: Fix setting base_reachable_time_ms variable.

Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 97d97224 ("[SERIAL] Fix
console initialisation ordering"), serial_core calls ->pm() on
initialization even if the port was used for console.

This behaviour breaks serial_txx9 console since The serial_txx9 driver
initialize its port entirely on its ->pm() method if new state was 0.
This patch adds checking for oldstate value to fix this probelm.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix possible array overflow:

drivers/pci/intel-iommu.c: In function ¡dmar_get_fault_reason¢:
drivers/pci/intel-iommu.c:753: warning: array subscript is above array bounds
drivers/pci/intel-iommu.c: In function ¡iommu_page_fault¢:
drivers/pci/intel-iommu.c:753: warning: array subscript is above array bounds
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: Mark Gross <mgross@linux.intel.com>
Acked-by: N"Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Evgeniy said:

  I wonder on what type of UFS do you test this patch?  NetBSD and FreeBSD
  do not use "fs_state", they use "fs_clean" flag, only Solaris does check
  like this: fs_state + fs_time == FSOK.

  That's why parentheses was like that.

  At now with linux-2.6.24-rc1-git1, I get: fs need fsck, but NetBSD's fsck
  says that's all ok.

  I suggest revert this patch.

Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Satyam Sharma <satyam.sharma@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's possible to provoke unionfs (not yet in mainline, though in mm and
some distros) to hit shmem_writepage's BUG_ON(page_mapped(page)).  I expect
it's possible to provoke the 2.6.23 ecryptfs in the same way (but the
2.6.24 ecryptfs no longer calls lower level's ->writepage).

This came to light with the recent find that AOP_WRITEPAGE_ACTIVATE could
leak from tmpfs via write_cache_pages and unionfs to userspace.  There's
already a fix (e4230030 - writeback: don't
propagate AOP_WRITEPAGE_ACTIVATE) in the tree for that, and it's okay so
far as it goes; but insufficient because it doesn't address the underlying
issue, that shmem_writepage expects to be called only by vmscan (relying on
backing_dev_info capabilities to prevent the normal writeback path from
ever approaching it).

That's an increasingly fragile assumption, and ramdisk_writepage (the other
source of AOP_WRITEPAGE_ACTIVATEs) is already careful to check
wbc->for_reclaim before returning it.  Make the same check in
shmem_writepage, thereby sidestepping the page_mapped BUG also.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: Erez Zadok <ezk@cs.sunysb.edu>
Cc: <stable@kernel.org>
Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm/sparse-vmemmap.c uses init_mm in some places.  However, it is not
present in any of the headers currently included in the file.

init_mm is defined as extern in sched.h, so we add it to the headers list

Up to now, this problem was masked by the fact that functions like
set_pte_at() and pmd_populate_kernel() are usually macros that expand to
simpler variants that does not use the first parameter at all.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No reason I can think of of making them default y Most people don't have
the hardware and with default y they just pollute lots of configs during
make oldconfig.
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NJeff Garzik <jeff@garzik.org>
Acked-by: N"Nelson, Shannon" <shannon.nelson@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit baa3a2a0 ("sysctl: remove broken
sunrpc debug binary sysctls"), by removing initialization of the
ctl_name field, broke this conditional, preventing the display of
rpc_tasks that you previously got when turning on rpc debugging.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove warning from powerpc ppc64_defconfig builds:

drivers/video/aty/radeon_pm.c:30: warning: 'radeon_reinitialize_M10' declared 'static' but never defined

It's used only under CONFIG_PM, and only with CONFIG_X86 before it is
defined, so the forward declaration can be moved under the ifdef.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix FB_OMAP dependencies so that the OMAP FB driver options are presented
correctly.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Coverity spotted some incorrect code in a recent change to the IPMI driver;
this patch make sure the data is really long enough to pull the
manufacturer id and product id out of a get device id message.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Stian Jordet <liste@jordet.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do not allow processes to clear their TIF_SIGPENDING if TIF_FREEZE is set,
so that they will not race with the freezer (like mysqld does, for example).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NNigel Cunningham <nigel@suspend2.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement ATA_QCFLAG_QUIET which indicates that there's no need to
report if the command fails with AC_ERR_DEV and set it for passthrough
commands.

Combined with previous changes, this now makes device errors for all
direct commands reported directly to the issuer without going through
EH actions and reporting.

Note that EH is still invoked after non-IO device errors to determine
the nature of the error and resume command execution (some controller
requires special care after error to continue).  It just performs
default maintenance after error, examines what's going on, realizes
that it's none of its business and reports the command failure without
logging any error messages.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

libata EH always revalidated device and retried failed command after
error except for ATAPI CCs.  This is unnecessary and hinders with
users issuing direct commands.  This patch makes the following
changes.

* Make sata_sil24 not request ATA_EH_REVALIDATE on device errors.
  sil24 is the only driver which does this.  All others let libata EH
  core code decide.

* Don't request revalidation after device error of non-IO command.
  Revalidation doesn't really help anybody.  As ATA_EH_REVALIDATE
  isn't set by default, there's no reason to clear it after sense data
  is read.  Kill ATA_EH_REVALIDATE clearing code while at it.

* Don't retry non-IO command after device error.  Device has rejected
  the command.  There's no point in retrying.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

ATA_QCFLAG_IO is used to mark commands which are used to perform
regluar IO transfers via block layer.  These commands are assumed to
be valid and taken more seriously during error handling.  Cache flush
is used by regular IO path and necessary for data integrity.  Mark it
with ATA_QCFLAG_IO.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Minor sata_promise cleanups:
- use C99 array initialisers in pdc_port_info[]
- add myself in the file head's Maintained by note,
  since users don't always read the MAINTAINERS file
- SG/PRD bug workaround warrants driver version bump
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
--
 drivers/ata/sata_promise.c |   17 +++++++++--------
 1 files changed, 9 insertions(+), 8 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Second-generation Promise SATA controllers have an ASIC bug
which can trigger if the last PRD entry is larger than 164 bytes,
resulting in intermittent errors and possible data corruption.

Work around this by replacing calls to ata_qc_prep() with a
private version that fills the PRD, checks the size of the
last entry, and if necessary splits it to avoid the bug.
Also reduce sg_tablesize by 1 to accommodate the new entry.

Tested on the second-generation SATA300 TX4 and SATA300 TX2plus,
and the first-generation PDC20378.

Thanks to Alexander Sabourenkov for verifying the bug by
studying the vendor driver, and for writing the initial patch
upon which this one is based.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
--
Changes since previous version:
* use new PDC_MAX_PRD constant to initialise sg_tablesize

 drivers/ata/sata_promise.c |   87 ++++++++++++++++++++++++++++++++++++++++++---
 1 files changed, 83 insertions(+), 4 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>