Document compatible string, and required DT properties for APDS9960
chipset driver.
Reviewed-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NMatt Ranostay <mranostay@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds support for IIO buffer to the Vybrid ADC driver.
IIO triggered buffer infrastructure along with iio sysfs trigger
is used to leverage continuous sampling support provided by the
ADC block.
Signed-off-by: NSanchayan Maity <maitysanchayan@gmail.com>
Acked-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

To lpc32xx_adc driver, when platform_get_resource or
platform_get_irq failed, we should use -ENXIO as a
return value, but not -EBUSY.
Signed-off-by: NPeng Fan <van.freenix@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

drivers/iio/light/opt3001.c:796:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add Holt Integrated Circuits, Inc. to the list of device tree vendor
prefixes
Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Support triggered events.

This is useful for chips that don't have their own interrupt sources.
It allows to use generic/standalone iio triggers for those drivers.
Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Implemented Low pass 3db frequency filter which configures
FIR and IIR values within the configuration register of EEPROM.
For more standardized interface we have fixed the FIR value
to 1024, while changes in IIR value are directly connected to
filter responses. The new datasheet version will provide a
simplified table (also in reStructured text format below) with
this change, to provide quick overview of possible settings.

Below sensor timings (bandwidth) are calculated for 3db frequency
low pass filter.

+--------------------+-----------------+
| Filter setting (%) | Band width (Hz) |
|  (rounded to 1.0)  |                 |
+====================+=================+
|         13         |      0.15       |
+--------------------+-----------------+
|         17         |      0.20       |
+--------------------+-----------------+
|         25         |      0.31       |
+--------------------+-----------------+
|         50         |      0.77       |
+--------------------+-----------------+
|         57         |      0.86       |
+--------------------+-----------------+
|         67         |      1.10       |
+--------------------+-----------------+
|         80         |      1.53       |
+--------------------+-----------------+
|        100         |      7.23       |
+--------------------+-----------------+

The diff is made towards togreg branch. Added myself to MAINTAINERS and
authors as per discussion with Jonathan.
Signed-off-by: NCrt Mori <cmo@melexis.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The maximum possible value for the relative humidity is 55575 (100%RH).
This value, if shifted right by 2 bits, uses 14 bits and masking it with
a 12 bit mask removes 2 meaningful bits.
The masking has been replaced with a range check that sets the minimum
value at 786 (0%RH) and the maximum at 13893 (99.998%RH).
Signed-off-by: NNicola Corna <nicola@corna.info>
Reviewed-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver has an OF id table but the .of_match_table is not set so
the SPI core can't do an OF style match and the table was unused.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NMichael Welling <mwelling@ieee.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The SPI core always reports the MODALIAS uevent as "spi:<modalias>"
regardless of the mechanism that was used to register the device
(i.e: OF or board code) and the table that is used later to match
the driver with the device (i.e: SPI id table or OF match table).

So drivers needs to export the SPI id table and this be built into
the module or udev won't have the necessary information to autoload
the needed driver module when the device is added.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The Documentation/devicetree/bindings/iio/dac/ad7303.txt DT binding doc
lists "adi,ad7303" as a compatible string but the corresponding driver
does not have an OF match table. Add the table to the driver so the SPI
core can do an OF style match.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The Documentation/devicetree/bindings/iio/frequency/adf4350.txt DT binding
doc lists "adi,adf4350" or "adi,adf4351" as compatible strings but the
corresponding driver does not have an OF match table. Add the table to the
driver so the SPI core can do an OF style match.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt DT binding
doc lists "ti,adc128s052" or "ti,adc122s021" as compatible strings but the
corresponding driver does not have an OF match table. Add the table to the
driver so the SPI core can do an OF style match.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The Documentation/devicetree/bindings/iio/proximity/as3935.txt DT binding
doc lists "ams,as3935" as a compatible string but the corresponding driver
does not have an OF match table. Add the table to the driver so the SPI
core can do an OF style match.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver has an OF id table but the .of_match_table is not set so
the SPI core can't do an OF style match and the table was unused.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The SPI core always reports the MODALIAS uevent as "spi:<modalias>"
regardless of the mechanism that was used to register the device
(i.e: OF or board code) and the table that is used later to match
the driver with the device (i.e: SPI id table or OF match table).

So drivers needs to export the SPI id table and this be built into
the module or udev won't have the necessary information to autoload
the needed driver module when the device is added.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fix style issue related to missing braces, detected by checkpatch.pl.
Signed-off-by: NCristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fix alignment for function parameters as suggested by checkpatch.pl.
Signed-off-by: NCristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver currently registers a pair of irq handlers using
request_threaded_irq(), however the synchronization mechanism between the
hardirq and the threadedirq handler is a regular spinlock.

Unfortunately, this breaks PREEMPT_RT builds, where a spinlock can sleep,
and is thus not able to be acquired from a hardirq handler. This patch gets
rid of the threaded handler and pushes all interrupt handling into the
hardirq context, and uses request_irq().

To validate that this change has no impact on RT performance, here are
cyclictest values with no processes running:

$ sudo cyclictest -S -m -p 98
policy: fifo: loadavg: 0.00 0.01 0.05 1/174 2539
T: 0 ( 1405) P:98 I:1000 C:167010520 Min: 9 Act: 12 Avg: 12 Max: 75
T: 1 ( 1862) P:98 I:1500 C:111340339 Min: 9 Act: 12 Avg: 12 Max: 73

Then, all xadc raw handles were accessed in a continuous loop via
/sys/bus/iio/devices/iio:device0:

$ sudo cyclictest -S -m -p 98
policy: fifo: loadavg: 7.84 7.70 7.63 3/182 4260
T: 0 ( 2559) P:98 I:1000 C:241557018 Min: 11 Act: 18 Avg: 21 Max: 74
T: 1 ( 2560) P:98 I:1500 C:161038006 Min: 10 Act: 21 Avg: 20 Max: 73
Signed-off-by: NXander Huff <xander.huff@ni.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Load the driver using the below command:
echo hmc5983 0x1e > /sys/bus/i2c/devices/i2c-?/new_device

In sysfs, the iio name is hmc5843, however the i2c name is hmc5983,
they are inconsistent.

With this patch, the iio name will be the same as the i2c device name
Signed-off-by: NYong Li <sdliyong@gmail.com>
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This makes the error from iio_event_getfd() percolate up
to userspace properly so we can know for sure there is no
events on this device (-ENODEV returned). Before this patch
we would bail out looking for the unsupported events on the
erroneous (negative) file descriptor.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Currently if generic_buffer is invoked without first enabling any
channels in scan_elements/*_en, it will fail unable to enable the
buffer because bytes_per_datum inside the kernel will be zero if
no channels are available.

It is implied that the user of the program should enable channels
manually or with a script before executing generic_buffer.

Be more helpful by stopping execution if no enabled channels can
be found, and print a helptext that will tell you what is wrong
and what needs to be done.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This makes the event monitor bail out with a helpful error
message if a device does not support events, as a related
fix to iio core now makes it return -ENODEV properly.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This adds a debugfs hook to read/write registers in the ST
sensors using debugfs. Proved to be awesome help when trying
to debug why IRQs do not arrive.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NDenis Ciocca <denis.ciocca@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds the documentation ABI for the remove_trigger
attribute, provided by the iio-trig-sysfs stand-alone driver.
Signed-off-by: NCristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds the ABI documentation for the add_trigger
attribute, which is provided by the iio-trig-sysfs stand-alone driver.
Signed-off-by: NCristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

i2c_get_clientdata() is specifically for i2c. Replace it with the
generic dev_get/set_drvdata() to support different protocols.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

i2c_client variable is not really used anymore in the core driver. It is
only used to get the device to make proper outputs.

This patch replaces all i2c_client usage through direct usage of the
device pointer.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch introduces regmap usage into the driver. This is done to
later easily support the SPI interface of this chip.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

For generic IIO trigger implementations we already have a sub-directory,
but the generic buffer implementations currently reside in the IIO
top-level directory. The main reason is that things have historically grown
into this form.

With more generic buffer implementations on its way now is the perfect time
to clean this up and introduce a sub-directory for generic buffer
implementations to avoid too much clutter in the top-level directory.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Currently the IIO callback buffer implementation is directly built into the
IIO core module when enabled. Given that the callback buffer module is
standalone functionallity there is really no reason to do this. So move it
to its own module.

Also rename the source to follow the standard IIO module naming convention
as well as add a license notice to the file.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Move the entry for the CC 10001 ADC driver in Kconfig and Makefile up to
maintain alphabetic order.
Signed-off-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Sort the entry for bmc105_magn in Kconfig and Makefile to its correct
position. Also add the minor module information for completeness.

Fixes: c91746a2 ("iio: magn: Add support for BMC150 magnetometer")
Signed-off-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Adjust some indentation issues as spotted by checkpatch.pl --strict
Signed-off-by: NHartmut Knaack <knaack.h@gmx.de>
Reviewed-by: NTiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Indicate the bit number of predefined states, make use of these names and
change the state type in _resume to u8 to avoid type casting.
Signed-off-by: NHartmut Knaack <knaack.h@gmx.de>
Reviewed-by: NTiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Check for the following error cases:
  * lower boundary for val in _write_event
  * return value of regmap_(field_)read
  * possible values for chan->type
  * return value of stk3310_gpio_probe

Also add an error path in _probe to put the sensor back into stand-by mode
in case of serious errors.
Signed-off-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Some adjustment of indentation to make checkpatch.pl happy in strict mode.
Signed-off-by: NHartmut Knaack <knaack.h@gmx.de>
Acked-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Move the call to enable channel interrupts into its _read() function to
have it protected by a mutex. This ensures that only one channel is
sampled at a time.
Signed-off-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Make use of GENMASK for consecutive bitmasks and BIT for single bitmasks.
Signed-off-by: NHartmut Knaack <knaack.h@gmx.de>
Acked-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>