This reverts commit:

  f47233c2 ("x86/mm/ASLR: Propagate base load address calculation")

The main reason for the revert is that the new boot flag does not work
at all currently, and in order to make this work, we need non-trivial
changes to the x86 boot code which we didn't manage to get done in
time for merging.

And even if we did, they would've been too risky so instead of
rushing things and break booting 4.1 on boxes left and right, we
will be very strict and conservative and will take our time with
this to fix and test it properly.
Reported-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: H. Peter Anvin <hpa@linux.intel.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Junjie Mao <eternal.n08@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20150316100628.GD22995@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit:

  e2b32e67 ("x86, kaslr: randomize module base load address")

makes the base address for module to be unconditionally randomized in
case when CONFIG_RANDOMIZE_BASE is defined and "nokaslr" option isn't
present on the commandline.

This is not consistent with how choose_kernel_location() decides whether
it will randomize kernel load base.

Namely, CONFIG_HIBERNATION disables kASLR (unless "kaslr" option is
explicitly specified on kernel commandline), which makes the state space
larger than what module loader is looking at. IOW CONFIG_HIBERNATION &&
CONFIG_RANDOMIZE_BASE is a valid config option, kASLR wouldn't be applied
by default in that case, but module loader is not aware of that.

Instead of fixing the logic in module.c, this patch takes more generic
aproach. It introduces a new bootparam setup data_type SETUP_KASLR and
uses that to pass the information whether kaslr has been applied during
kernel decompression, and sets a global 'kaslr_enabled' variable
accordingly, so that any kernel code (module loading, livepatching, ...)
can make decisions based on its value.

x86 module loader is converted to make use of this flag.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Link: https://lkml.kernel.org/r/alpine.LNX.2.00.1502101411280.10719@pobox.suse.cz
[ Always dump correct kaslr status when panicking ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

There is already defined macro KEEP_SEGMENTS in
<asm/bootparam.h>, let's use it instead of hardcoded
constants.
Signed-off-by: NAlexander Kuleshov <kuleshovmail@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1424331298-7456-1-git-send-email-kuleshovmail@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Recently instrumentation of builtin functions calls was removed from GCC
5.0.  To check the memory accessed by such functions, userspace asan
always uses interceptors for them.

So now we should do this as well.  This patch declares
memset/memmove/memcpy as weak symbols.  In mm/kasan/kasan.c we have our
own implementation of those functions which checks memory before accessing
it.

Default memset/memmove/memcpy now now always have aliases with '__'
prefix.  For files that built without kasan instrumentation (e.g.
mm/slub.c) original mem* replaced (via #define) with prefixed variants,
cause we don't want to check memory accesses there.
Signed-off-by: NAndrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: NAndrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds arch specific code for kernel address sanitizer.

16TB of virtual addressed used for shadow memory.  It's located in range
[ffffec0000000000 - fffffc0000000000] between vmemmap and %esp fixup
stacks.

At early stage we map whole shadow region with zero page.  Latter, after
pages mapped to direct mapping address range we unmap zero pages from
corresponding shadow (see kasan_map_shadow()) and allocate and map a real
shadow memory reusing vmemmap_populate() function.

Also replace __pa with __pa_nodebug before shadow initialized.  __pa with
CONFIG_DEBUG_VIRTUAL=y make external function call (__phys_addr)
__phys_addr is instrumented, so __asan_load could be called before shadow
area initialized.
Signed-off-by: NAndrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: NAndrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jim Davis <jim.epost@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Andy pointed out that if an NMI or MCE is received while we're in the
middle of an EFI mixed mode call a triple fault will occur. This can
happen, for example, when issuing an EFI mixed mode call while running
perf.

The reason for the triple fault is that we execute the mixed mode call
in 32-bit mode with paging disabled but with 64-bit kernel IDT handlers
installed throughout the call.

At Andy's suggestion, stop playing the games we currently do at runtime,
such as disabling paging and installing a 32-bit GDT for __KERNEL_CS. We
can simply switch to the __KERNEL32_CS descriptor before invoking
firmware services, and run in compatibility mode. This way, if an
NMI/MCE does occur the kernel IDT handler will execute correctly, since
it'll jump to __KERNEL_CS automatically.

However, this change is only possible post-ExitBootServices(). Before
then the firmware "owns" the machine and expects for its 32-bit IDT
handlers to be left intact to service interrupts, etc.

So, we now need to distinguish between early boot and runtime
invocations of EFI services. During early boot, we need to restore the
GDT that the firmware expects to be present. We can only jump to the
__KERNEL32_CS code segment for mixed mode calls after ExitBootServices()
has been invoked.

A liberal sprinkling of comments in the thunking code should make the
differences in early and late environments more apparent.
Reported-by: NAndy Lutomirski <luto@amacapital.net>
Tested-by: NBorislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Commit e6023367 ("x86, kaslr: Prevent .bss from overlaping initrd")
added Perl to the required build environment.  This reimplements in
shell the Perl script used to find the size of the kernel with bss and
brk added.
Signed-off-by: NKees Cook <keescook@chromium.org>
Reported-by: NRob Landley <rob@landley.net>
Acked-by: NRob Landley <rob@landley.net>
Cc: Anca Emanuel <anca.emanuel@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Junjie Mao <eternal.n08@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On 64-bit, relocation is not required unless the load address gets
changed. Without this, relocations do unexpected things when the kernel
is above 4G.
Reported-by: NBaoquan He <bhe@redhat.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Tested-by: NThomas D. <whissi@whissi.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Junjie Mao <eternal.n08@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20150116005146.GA4212@www.outflux.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

commit e6023367 'x86, kaslr: Prevent .bss from overlaping initrd'
broke the cross compile of x86. It added a objdump invocation, which
invokes the host native objdump and ignores an active cross tool
chain.

Use $(OBJDUMP) instead which takes the CROSS_COMPILE prefix into
account.

[ tglx: Massage changelog and use $(OBJDUMP) ]

Fixes: e6023367 'x86, kaslr: Prevent .bss from overlaping initrd'
Signed-off-by: NChris Clayton <chris2553@googlemail.com>
Acked-by: NKees Cook <keescook@chromium.org>
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: Junjie Mao <eternal.n08@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/54705C8E.1080400@googlemail.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This reverts commit 84be8805, which itself reverted my original
attempt to move x86 from #include'ing .c files from across the tree
to using the EFI stub built as a static library.

The issue that affected the original approach was that splitting
the implementation into several .o files resulted in the variable
'efi_early' becoming a global with external linkage, which under
-fPIC implies that references to it must go through the GOT. However,
dealing with this additional GOT entry turned out to be troublesome
on some EFI implementations. (GCC's visibility=hidden attribute is
supposed to lift this requirement, but it turned out not to work on
the 32-bit build.)

Instead, use a pure getter function to get a reference to efi_early.
This approach results in no additional GOT entries being generated,
so there is no need for any changes in the early GOT handling.
Tested-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This is in preparation of using RIP-relative addressing in many of the
per-CPU accesses.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/5458A15A0200007800044A9A@mail.emea.novell.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This adds a comment detailing the various intermediate files used to build
the bootable decompression image for the x86 kernel.
Signed-off-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Junjie Mao <eternal.n08@gmail.com>
Link: http://lkml.kernel.org/r/20141031162204.GA26268@www.outflux.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

When choosing a random address, the current implementation does not take into
account the reversed space for .bss and .brk sections. Thus the relocated kernel
may overlap other components in memory. Here is an example of the overlap from a
x86_64 kernel in qemu (the ranges of physical addresses are presented):

 Physical Address

    0x0fe00000                  --+--------------------+  <-- randomized base
                               /  |  relocated kernel  |
                   vmlinux.bin    | (from vmlinux.bin) |
    0x1336d000    (an ELF file)   +--------------------+--
                               \  |                    |  \
    0x1376d870                  --+--------------------+   |
                                  |    relocs table    |   |
    0x13c1c2a8                    +--------------------+   .bss and .brk
                                  |                    |   |
    0x13ce6000                    +--------------------+   |
                                  |                    |  /
    0x13f77000                    |       initrd       |--
                                  |                    |
    0x13fef374                    +--------------------+

The initrd image will then be overwritten by the memset during early
initialization:

[    1.655204] Unpacking initramfs...
[    1.662831] Initramfs unpacking failed: junk in compressed archive

This patch prevents the above situation by requiring a larger space when looking
for a random kernel base, so that existing logic can effectively avoids the
overlap.

[kees: switched to perl to avoid hex translation pain in mawk vs gawk]
[kees: calculated overlap without relocs table]

Fixes: 82fa9637 ("x86, kaslr: Select random position from e820 maps")
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJunjie Mao <eternal.n08@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1414762838-13067-1-git-send-email-eternal.n08@gmail.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

All other calls to allocate memory seem to make some noise already, with the
exception of two calls (for gop, uga) in the setup_graphics path.

The purpose is to be noisy on worrysome errors immediately.

commit fb86b244 ("x86/efi: Add better error logging to EFI boot
stub") introduces printing false alarms for lots of hardware. Rather
than playing Whack a Mole with non-fatal exit conditions, try the other
way round.

This is per Matt Fleming's suggestion:

> Where I think we could improve things
> is by adding efi_printk() message in certain error paths. Clearly, not
> all error paths need such messages, e.g. the EFI_INVALID_PARAMETER path
> you highlighted above, but it makes sense for memory allocation and PCI
> read failures.

Link: http://article.gmane.org/gmane.linux.kernel.efi/4628Signed-off-by: NAndre Müller <andre.muller@web.de>
Cc: Ulf Winkelvos <ulf@winkelvos.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

We need a way to customize the behaviour of the EFI boot stub, in
particular, we need a way to disable the "chunking" workaround, used
when reading files from the EFI System Partition.

One of my machines doesn't cope well when reading files in 1MB chunks to
a buffer above the 4GB mark - it appears that the "chunking" bug
workaround triggers another firmware bug. This was only discovered with
commit 4bf7111f ("x86/efi: Support initrd loaded above 4G"), and
that commit is perfectly valid. The symptom I observed was a corrupt
initrd rather than any kind of crash.

efi= is now used to specify EFI parameters in two very different
execution environments, the EFI boot stub and during kernel boot.

There is also a slight performance optimization by enabling efi=nochunk,
but that's offset by the fact that you're more likely to run into
firmware issues, at least on x86. This is the rationale behind leaving
the workaround enabled by default.

Also provide some documentation for EFI_READ_CHUNK_SIZE and why we're
using the current value of 1MB.
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Building 32-bit threw a warning on kASLR enabled builds:

arch/x86/boot/compressed/aslr.c: In function ‘mem_avoid_overlap’:
arch/x86/boot/compressed/aslr.c:198:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
   avoid.start = (u64)ptr;
                 ^

This fixes the warning; unsigned long should have been used here.
Signed-off-by: NKees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20141001183632.GA11431@www.outflux.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

If we're executing the 32-bit efi_char16_printk() code path (i.e.
running on top of 32-bit firmware) we know that efi_early->text_output
will be a 32-bit value, even though ->text_output has type u64.

Unfortunately, we currently pass ->text_output directly to
efi_early->call() so for CONFIG_X86_32 the compiler will push a 64-bit
value onto the stack, causing the other parameters to be misaligned.

The way we handle this in the rest of the EFI boot stub is to pass
pointers as arguments to efi_early->call(), which automatically do the
right thing (pointers are 32-bit on CONFIG_X86_32, and we simply ignore
the upper 32-bits of the argument register if running in 64-bit mode
with 32-bit firmware).

This fixes a corruption bug when printing strings from the 32-bit EFI
boot stub.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=84241Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

A number of people are reporting seeing the "setup_efi_pci() failed!"
error message in what used to be a quiet boot,

  https://bugzilla.kernel.org/show_bug.cgi?id=81891

The message isn't all that helpful because setup_efi_pci() can return a
non-success error code for a variety of reasons, not all of them fatal.

Let's drop the return code from setup_efi_pci*() altogether, since
there's no way to process it in any meaningful way outside of the inner
__setup_efi_pci*() functions.
Reported-by: NDarren Hart <dvhart@linux.intel.com>
Reported-by: NJosh Boyer <jwboyer@fedoraproject.org>
Cc: Ulf Winkelvos <ulf@winkelvos.de>
Cc: Andre Müller <andre.muller@web.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This reverts commit f23cf8bd ("efi/x86: efistub: Move shared
dependencies to <asm/efi.h>") as well as the x86 parts of commit
f4f75ad5 ("efi: efistub: Convert into static library").

The road leading to these two reverts is long and winding.

The above two commits were merged during the v3.17 merge window and
turned the common EFI boot stub code into a static library. This
necessitated making some symbols global in the x86 boot stub which
introduced new entries into the early boot GOT.

The problem was that we weren't fixing up the newly created GOT entries
before invoking the EFI boot stub, which sometimes resulted in hangs or
resets. This failure was reported by Maarten on his Macbook pro.

The proposed fix was commit 9cb0e394 ("x86/efi: Fixup GOT in all
boot code paths"). However, that caused issues for Linus when booting
his Sony Vaio Pro 11. It was subsequently reverted in commit
f3670394.

So that leaves us back with Maarten's Macbook pro not booting.

At this stage in the release cycle the least risky option is to revert
the x86 EFI boot stub to the pre-merge window code structure where we
explicitly #include efi-stub-helper.c instead of linking with the static
library. The arm64 code remains unaffected.

We can take another swing at the x86 parts for v3.18.

Conflicts:
	arch/x86/include/asm/efi.h
Tested-by: NJosh Boyer <jwboyer@fedoraproject.org>
Tested-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org> [arm64]
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This reverts commit 9cb0e394.

It causes my Sony Vaio Pro 11 to immediately reboot at startup.
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The KASLR location-choosing logic needs to avoid the setup_data
list memory areas as well. Without this, it would be possible to
have the ASLR position stomp on the memory, ultimately causing
the boot to fail.
Signed-off-by: NKees Cook <keescook@chromium.org>
Tested-by: NBaoquan He <bhe@redhat.com>
Cc: stable@vger.kernel.org
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140911161931.GA12001@www.outflux.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Maarten reported that his Macbook pro 8.2 stopped booting after commit
f23cf8bd ("efi/x86: efistub: Move shared dependencies to
<asm/efi.h>"), the main feature of which is changing the visibility of
symbol 'efi_early' from local to global.

By making 'efi_early' global we end up requiring an entry in the Global
Offset Table. Unfortunately, while we do include code to fixup GOT
entries in the early boot code, it's only called after we've executed
the EFI boot stub.

What this amounts to is that references to 'efi_early' in the EFI boot
stub don't point to the correct place.

Since we've got multiple boot entry points we need to be prepared to
fixup the GOT in multiple places, while ensuring that we never do it
more than once, otherwise the GOT entries will still point to the wrong
place.
Reported-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Mantas found that after commit 4bf7111f ("x86/efi: Support initrd
loaded above 4G"), the kernel freezes at the earliest possible moment
when trying to boot via UEFI on Asus laptop.

Revert to old way to load initrd under 4G on first try, second try will
use above 4G buffer when initrd is too big and does not fit under 4G.

[ The cause of the freeze appears to be a firmware bug when reading
  file data into buffers above 4GB, though the exact reason is unknown.
  Mantas reports that the hang can be avoid if the file size is a
  multiple of 512 bytes, but I've seen some ASUS firmware simply
  corrupting the file data rather than freezing.

  Laszlo fixed an issue in the upstream EDK2 DiskIO code in Aug 2013
  which may possibly be related, commit 4e39b75e ("MdeModulePkg/DiskIoDxe:
  fix source/destination pointer of overrun transfer").

  Whatever the cause, it's unlikely that a fix will be forthcoming
  from the vendor, hence the workaround - Matt ]

Cc: Laszlo Ersek <lersek@redhat.com>
Reported-by: NMantas Mikulėnas <grawity@gmail.com>
Reported-by: NHarald Hoyer <harald@redhat.com>
Tested-by: NAnders Darander <anders@chargestorm.se>
Tested-by: NCalvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

All the code in early_serial_console.c gets compiled out if
!CONFIG_EARLY_PRINTK, but early_serial_console.o itself still gets
compiled in.  Eliminate it from the compile entirely in that case.

This does not change the generated code at all, in either case.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

All the code in aslr.c gets compiled out if !CONFIG_RANDOMIZE_BASE, but
aslr.o itself still gets compiled in.  Eliminate it from the compile
entirely in that case.

This does not change the generated code at all, in either case.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

Switch VMLINUX_OBJS to vmlinux-objs-y, to eliminate Makefile
conditionals in favor of vmlinux-objs-$(CONFIG_*) constructs.

This does not change the generated code at all.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

Hopefully this will enable us to better debug:
https://bugzilla.kernel.org/show_bug.cgi?id=68761Signed-off-by: NUlf Winkelvos <ulf@winkelvos.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This patch changes both x86 and arm64 efistub implementations
from #including shared .c files under drivers/firmware/efi to
building shared code as a static library.

The x86 code uses a stub built into the boot executable which
uncompresses the kernel at boot time. In this case, the library is
linked into the decompressor.

In the arm64 case, the stub is part of the kernel proper so the library
is linked into the kernel proper as well.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

In order to move from the #include "../../../xxxxx.c" anti-pattern used
by both the x86 and arm64 versions of the stub to a static library
linked into either the kernel proper (arm64) or a separate boot
executable (x86), there is some prepatory work required.

This patch does the following:
- move forward declarations of functions shared between the arch
  specific and the generic parts of the stub to include/linux/efi.h
- move forward declarations of functions shared between various .c files
  of the generic stub code to a new local header file called "efistub.h"
- add #includes to all .c files which were formerly relying on the
  #includor to include the correct header files
- remove all static modifiers from functions which will need to be
  externally visible once we move to a static library
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This moves definitions depended upon both by code under arch/x86/boot
and under drivers/firmware/efi to <asm/efi.h>. This is in preparation of
turning the stub code under drivers/firmware/efi into a static library.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

For boot efi kernel directly without bootloader.
If the kernel support XLF_CAN_BE_LOADED_ABOVE_4G, we should
not limit initrd under hdr->initrd_add_max.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Changes kASLR from being compile-time selectable (blocked by
CONFIG_HIBERNATION), to being boot-time selectable (with hibernation
available by default) via the "kaslr" kernel command line.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Given the fact that we removed inclusion of boot.h from boot/string.c
does not look like we need misc.h inclusion in compressed/string.c. So
remove it.

misc.h was also pulling in string_32.h which in turn had macros for
memcmp and memcpy. So we don't need to #undef memcmp and memcpy anymore.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1398447972-27896-3-git-send-email-vgoyal@redhat.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

As requested by Linus add explicit __visible to the asmlinkage users.
This marks all functions visible to assembler.

Tree sweep for arch/x86/*
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-3-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

We really only need one phys and one virt function call, and then only
one assembly function to make firmware calls.

Since we are not using the C type system anyway, we're not really losing
much by deleting the macros apart from no longer having a check that
we are passing the correct number of parameters. The lack of duplicated
code seems like a worthwhile trade-off.

Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Instead of truncating UTF-16 assuming all characters is ASCII,
properly convert it to UTF-8.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
[ Bug and style fixes. ]
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

We're currently passing the file handle for the root file system to
efi_file_read() and efi_file_close(), instead of the file handle for the
file we wish to read/close.

While this has worked up until now, it seems that it has only been by
pure luck. Olivier explains,

 "The issue is the UEFI Fat driver might return the same function for
  'fh->read()' and 'h->read()'. While in our case it does not work with
  a different implementation of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. In our
  case, we return a different pointer when reading a directory and
  reading a file."

Fixing this actually clears up the two functions because we can drop one
of the arguments, and instead only pass a file 'handle' argument.
Reported-by: NOlivier Martin <olivier.martin@arm.com>
Reviewed-by: NOlivier Martin <olivier.martin@arm.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

code32_start should point at the start of the protected mode code, and
*not* at the beginning of the bzImage. This is much easier to do in
assembly so document that callers of make_boot_params() need to fill out
code32_start.

The fallout from this bug is that we would end up relocating the image
but copying the image at some offset, resulting in what appeared to be
memory corruption.
Reported-by: NThomas Bächler <thomas@archlinux.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

commit 54b52d87 ("x86/efi: Build our own EFI services pointer
table") introduced a regression because the 64-bit file_size()
implementation passed a pointer to a 32-bit data object, instead of a
pointer to a 64-bit object.

Because the firmware treats the object as 64-bits regardless it was
reading random values from the stack for the upper 32-bits.

This resulted in people being unable to boot their machines, after
seeing the following error messages,

    Failed to get file info size
    Failed to alloc highmem for files
Reported-by: NDzmitry Sledneu <dzmitry.sledneu@gmail.com>
Reported-by: NKoen Kooi <koen@dominion.thruhere.net>
Tested-by: NKoen Kooi <koen@dominion.thruhere.net>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The ARM EFI boot stub doesn't need to care about the efi_early
infrastructure that x86 requires in order to do mixed mode thunking. So
wrap everything up in an efi_call_early() macro.

This allows x86 to do the necessary indirection jumps to call whatever
firmware interface is necessary (native or mixed mode), but also allows
the ARM folks to mask the fact that they don't support relocation in the
boot stub and need to pass 'sys_table_arg' to every function.

[ hpa: there are no object code changes from this patch ]
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20140326091011.GB2958@console-pimps.org
Cc: Roy Franz <roy.franz@linaro.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>