- 21 7月, 2014 1 次提交
-
-
由 David Hildenbrand 提交于
This patch cleans up the code in handle_wait by reusing the common code function kvm_vcpu_block. signal_pending(), kvm_cpu_has_pending_timer() and kvm_arch_vcpu_runnable() are sufficient for checking if we need to wake-up that VCPU. kvm_vcpu_block uses these functions, so no checks are lost. The flag "timer_due" can be removed - kvm_cpu_has_pending_timer() tests whether the timer is pending, thus the vcpu is correctly woken up. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 10 7月, 2014 4 次提交
-
-
由 David Hildenbrand 提交于
This patch - adds s390 specific MP states to linux headers and documents them - implements the KVM_{SET,GET}_MP_STATE ioctls - enables KVM_CAP_MP_STATE - allows user space to control the VCPU state on s390. If user space sets the VCPU state using the ioctl KVM_SET_MP_STATE, we can disable manual changing of the VCPU state and trust user space to do the right thing. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
The function "__cpu_is_stopped" is not used any more. Let's remove it and expose the function "is_vcpu_stopped" instead, which is actually what we want. This patch also converts an open coded check for CPUSTAT_STOPPED to is_vcpu_stopped(). Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Let's move the finalization of SIGP STOP and SIGP STOP AND STORE STATUS orders to the point where the VCPU is actually stopped. This change is needed to prepare for a user space driven VCPU state change. The action_bits may only be cleared when setting the cpu state to STOPPED while holding the local irq lock. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
A SIGP STOP (AND STORE STATUS) order is complete as soon as the VCPU has been stopped. This patch makes sure that only one SIGP STOP (AND STORE STATUS) may be pending at a time (as defined by the architecture). If the action_bits are still set, a SIGP STOP has been issued but not completed yet. The VCPU is busy for further SIGP STOP orders. Also set the CPUSTAT_STOP_INT after the action_bits variable has been modified (the same order that is used when injecting a KVM_S390_SIGP_STOP from userspace). Both changes are needed in preparation for a user space driven VCPU state change (to avoid race conditions). Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 30 5月, 2014 6 次提交
-
-
由 Matthew Rosato 提交于
Based on original patch from Jeng-fang (Nick) Wang When standby memory is specified for a guest Linux, but no virtual memory has been allocated on the Qemu host backing that guest, the guest memory detection process encounters a memory access exception which is not thrown from the KVM handle_tprot() instruction-handler function. The access exception comes from sie64a returning EFAULT, which then passes an addressing exception to the guest. Unfortunately this does not the proper PSW fixup (nullifying vs. suppressing) so the guest will get a fault for the wrong address. Let's just intercept the tprot instruction all the time to do the right thing and not go the page fault handler path for standby memory. tprot is only used by Linux during startup so some exits should be ok. Without this patch, standby memory cannot be used with KVM. Signed-off-by: NNick Wang <jfwang@us.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Tested-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
This patch removes the start of a VCPU when delivering a RESTART interrupt. Interrupt delivery is called from kvm_arch_vcpu_ioctl_run. So the VCPU is already considered started - no need to call kvm_s390_vcpu_start. This function will early exit anyway. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
This patch fixes a minor bug when updating the guest debug settings. We should check the given debug flags, not the already set ones. Doesn't do any harm but too many (for now unused) flags could be set internally without error. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Jens Freimann 提交于
We have all the logic to inject interrupts available in kvm_s390_inject_vcpu(), so let's use it instead of injecting irqs manually to the list in sigp code. SIGP stop is special because we have to check the action_flags before injecting the interrupt. As the action_flags are not available in kvm_s390_inject_vcpu() we leave the code for the stop order code untouched for now. Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
由 Thomas Huth 提交于
The TPROT instruction can be used to check the accessability of storage for any kind of logical addresses. So far, our handler only supported real addresses. This patch now also enables support for addresses that have to be translated via DAT first. And while we're at it, change the code to use the common KVM function gfn_to_hva_prot() to check for the validity and writability of the memory page. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
由 Thomas Huth 提交于
This patch adds a function for translating logical guest addresses into physical guest addresses without touching the memory at the given location. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
- 20 5月, 2014 1 次提交
-
-
由 Martin Schwidefsky 提交于
The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 16 5月, 2014 8 次提交
-
-
由 Michael Mueller 提交于
This patch splits the SIE state guest prefix at offset 4 into a prefix bit field. Additionally it provides the access functions: - kvm_s390_get_prefix() - kvm_s390_set_prefix() to access the prefix per vcpu. Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL operations will be interpreted instead of intercepted. A partial execution interception will occurr at the sending cpu only if the target cpu is in the wait state ("W" bit in the cpuflags set). Instruction interception will only happen in error cases (e.g. cpu addr invalid). As a sending cpu might set the external call interrupt pending flags at the target cpu at every point in time, we can't handle this kind of interrupt using our kvm interrupt injection mechanism. The injection will be done automatically by the SIE when preparing the start of the target cpu. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> CC: Thomas Huth <thuth@linux.vnet.ibm.com> [Adopt external call injection to check for sigp interpretion] Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Alexander Yarygin 提交于
The current trace definition doesn't work very well with the perf tool. Perf shows a "insn_to_mnemonic not found" message. Let's handle the decoding completely in a parseable format. Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Alexander Yarygin 提交于
Use the symbolic translation tables from sie.h for decoding diag, sigp and sie exit codes. Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Thomas Huth 提交于
Use the new helper function kvm_arch_fault_in_page() for faulting-in the guest pages and only inject addressing errors when we've really hit a bad address (and return other error codes to userspace instead). Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Thomas Huth 提交于
Rework the function kvm_arch_fault_in_sync() to become a proper helper function for faulting-in a guest page. Now it takes the guest address as a parameter and does not ignore the possible error code from gmap_fault() anymore (which could cause undetected error conditions before). Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Thomas Huth 提交于
If the new PSW for program interrupts is invalid, the VM ends up in an endless loop of specification exceptions. Since there is not much left we can do in this case, we should better drop to userspace instead so that the crash can be reported to the user. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Thomas Huth 提交于
As a program status word is also invalid (and thus generates an specification exception) if the instruction address is not even, we should test this in is_valid_psw(), too. This patch also exports the function so that it becomes available for other parts of the S390 KVM code as well. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 15 5月, 2014 1 次提交
-
-
由 Cornelia Huck 提交于
s390 has acquired irqfd support with commit "KVM: s390: irq routing for adapter interrupts" (84223598) but failed to announce it. Let's fix that. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 06 5月, 2014 3 次提交
-
-
由 Thomas Huth 提交于
The external interrupt interception can only occur in rare cases, e.g. when the PSW of the interrupt handler has a bad value. The old handler for this interception simply ignored these events (except for increasing the exit_external_interrupt counter), but for proper operation we either have to inject the interrupts manually or we should drop to userspace in case of errors. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Thomas Huth 提交于
Add an interface to inject clock comparator and CPU timer interrupts into the guest. This is needed for handling the external interrupt interception. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Dan Carpenter 提交于
When copy_from_user() fails, this code returns the number of bytes remaining instead of a negative error code. The positive number is returned to the user but otherwise it is harmless. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 29 4月, 2014 6 次提交
-
-
由 David Hildenbrand 提交于
This patch enables the IBS facility when a single VCPU is running. The facility is dynamically turned on/off as soon as other VCPUs enter/leave the stopped state. When this facility is operating, some instructions can be executed faster for single-cpu guests. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
This patch introduces two new functions to set/clear the CPUSTAT_STOPPED bit and makes use of it at all applicable places. These functions prepare the additional execution of code when starting/stopping a vcpu. The CPUSTAT_STOPPED bit should not be touched outside of these functions. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Thomas Huth 提交于
TEST BLOCK is also subject to the low-address protection, so we need to check the destination address in our handler. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Thomas Huth 提交于
Add a check for low-address protection to the PFMF handler and convert real-addresses to absolute if necessary, as it is defined in the Principles of Operations specification. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Thomas Huth 提交于
The s390 architecture has a special protection mechanism that can be used to prevent write access to the vital data in the low-core memory area. This patch adds a new helper function that can be used to check for such write accesses and in case of protection, it also sets up the exception data accordingly. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Thomas Huth 提交于
When the guest executes the MVPG instruction with DAT disabled, and the source or destination page is not mapped in the host, the so-called partial execution interception occurs. We need to handle this event by setting up a mapping for the corresponding user pages. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 22 4月, 2014 10 次提交
-
-
由 Michael Mueller 提交于
Factor out the new function handle_itdb(), which copies the ITDB into guest lowcore to fully handle a TX abort. Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Michael Mueller 提交于
The generically assembled low core labels already contain the address for the TDB. Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Christian Borntraeger 提交于
On hard exits (abort, sigkill) we have have some kvm_s390_interrupt_info structures hanging around. Delete those on exit to avoid memory leaks. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> CC: stable@vger.kernel.org Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
-
由 David Hildenbrand 提交于
When a guest is single-stepped, we want to disable timer interrupts. Otherwise, the guest will continuously execute the external interrupt handler and make debugging of code where timer interrupts are enabled almost impossible. The delivery of timer interrupts can be enforced in such sections by setting a breakpoint and continuing execution. In order to disable timer interrupts, they are disabled in the control register of the guest just before SIE entry and are suppressed in the interrupt check/delivery methods. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
This patch moves the checks for enabled timer (clock-comparator) interrupts and pending timer interrupts into own functions, making the code better readable and easier to maintain. The method kvm_cpu_has_pending_timer is filled with life. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
This patch adds support to debug the guest using the PER facility on s390. Single-stepping, hardware breakpoints and hardware watchpoints are supported. In order to use the PER facility of the guest without it noticing it, the control registers of the guest have to be patched and access to them has to be intercepted(stctl, stctg, lctl, lctlg). All PER program interrupts have to be intercepted and only the relevant PER interrupts for the guest have to be given back. Special care has to be taken about repeated exits on the same hardware breakpoint. The intervention of the host in the guests PER configuration is not fully transparent. PER instruction nullification can not be used by the guest and too many storage alteration events may be reported to the guest (if it is activated for special address ranges only) when the host concurrently debugging it. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Introduce the methods to emulate the stctl and stctg instruction. Added tracing code. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Whenever a program interrupt is intercepted, some parameters are stored in the sie control block. These parameters have to be extracted in order to be reinjected correctly. This patch also takes care of intercepted PER events which can occurr in addition to any program interrupt. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Heiko Carstens 提交于
Add kerneldoc comment to kvm_s390_real_to_abs() and change the code so it matches the coding style of the rest of gaccess.h. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-