- 21 7月, 2014 1 次提交
-
-
由 David Hildenbrand 提交于
This patch cleans up the code in handle_wait by reusing the common code function kvm_vcpu_block. signal_pending(), kvm_cpu_has_pending_timer() and kvm_arch_vcpu_runnable() are sufficient for checking if we need to wake-up that VCPU. kvm_vcpu_block uses these functions, so no checks are lost. The flag "timer_due" can be removed - kvm_cpu_has_pending_timer() tests whether the timer is pending, thus the vcpu is correctly woken up. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 10 7月, 2014 1 次提交
-
-
由 David Hildenbrand 提交于
This patch - adds s390 specific MP states to linux headers and documents them - implements the KVM_{SET,GET}_MP_STATE ioctls - enables KVM_CAP_MP_STATE - allows user space to control the VCPU state on s390. If user space sets the VCPU state using the ioctl KVM_SET_MP_STATE, we can disable manual changing of the VCPU state and trust user space to do the right thing. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 30 5月, 2014 1 次提交
-
-
由 Matthew Rosato 提交于
Based on original patch from Jeng-fang (Nick) Wang When standby memory is specified for a guest Linux, but no virtual memory has been allocated on the Qemu host backing that guest, the guest memory detection process encounters a memory access exception which is not thrown from the KVM handle_tprot() instruction-handler function. The access exception comes from sie64a returning EFAULT, which then passes an addressing exception to the guest. Unfortunately this does not the proper PSW fixup (nullifying vs. suppressing) so the guest will get a fault for the wrong address. Let's just intercept the tprot instruction all the time to do the right thing and not go the page fault handler path for standby memory. tprot is only used by Linux during startup so some exits should be ok. Without this patch, standby memory cannot be used with KVM. Signed-off-by: NNick Wang <jfwang@us.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Tested-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 28 5月, 2014 2 次提交
-
-
由 Martin Schwidefsky 提交于
Remove the 96-byte irb array from the lowcore and create a per-cpu variable instead. That way we will pick up any change in the definition of the struct irb automatically. Acked-By: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
The IRB might be 96 bytes if the extended-I/O-measurement facility is used. This feature is currently not used by Linux, but struct irb already has the emw defined. So let's make the irb in lowcore match the size of the internal data structure to be future proof. We also have to add a pad, to correctly align the paste. The bigger irb field also circumvents a bug in some QEMU versions that always write the emw field on test subchannel and therefore destroy the paste definitions of this CPU. Running under these QEMU version broke some timing functions in the VDSO and all users of these functions, e.g. some JREs. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: stable@vger.kernel.org
-
- 23 5月, 2014 1 次提交
-
-
由 Sebastian Ott 提交于
Let the driver core handle attribute creation by putting all s390 specific pci attributes in an attribute group which is referenced by pdev->dev.groups in pcibios_add_device. Link: https://lkml.kernel.org/r/alpine.LFD.2.11.1404141101500.1529@denkbrettReviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 20 5月, 2014 12 次提交
-
-
由 Martin Schwidefsky 提交于
In case a lock is contended it is better to do a load-and-test first before trying to get the lock with compare-and-swap. This helps to avoid unnecessary cache invalidations of the cacheline for the lock if the CPU has to wait for the lock. For an uncontended lock doing the compare-and-swap directly is a bit better, if the CPU does not have the cacheline in its cache yet the compare-and-swap will get it read-write immediately while a load-and-test would get it read-only first. Always to the load-and-test first to avoid the cacheline invalidations for the contended case outweight the potential read-only to read-write cacheline upgrade for the uncontended case. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Fix multiple definitions of struct channel_path_desc by moving it to asm/chpid.h . Also change ccw_device_get_chp_desc to use proper types. Reviewed-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
This shortens the code by ~17k (performace_defconfig, march=z196). The number of exception table entries however increases from 164 entries to 2500 entries (+~18k). However the executed code is shorter and also faster since we save the branches to the out-of-line copy_to/from_user implementations. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Add a bunch of s390 specific pci attributes to help identifying pci functions. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Let the driver core handle attribute creation by putting all s390 specific pci attributes in an attribute group which is referenced by pdev->dev.groups in pcibios_add_device. Link: https://lkml.kernel.org/r/alpine.LFD.2.11.1404141101500.1529@denkbrettReviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Always switch to the kernel ASCE in switch_mm. Load the secondary space ASCE in finish_arch_post_lock_switch after checking that any pending page table operations have completed. The primary ASCE is loaded in entry[64].S. With this the update_primary_asce call can be removed from the switch_to macro and from the start of switch_mm function. Remove the load_primary argument from update_user_asce/clear_user_asce, rename update_user_asce to set_user_asce and rename update_primary_asce to load_kernel_asce. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Currently the smp_stop_cpu() function for SMP kernels enters a busy loop when "begin" is entered on the z/VM console after Linux is halted. To avoid this behavior, use the non-SMP variant of smp_stop_cpu() which stops the CPU again after "begin" is entered. As a side effect we now have consistent behavior for SMP and non-SMP Linux. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Randy Dunlap 提交于
Fix new s390 kernel-doc warning: Warning(arch/s390/include/asm/ccwgroup.h:27): No description found for parameter 'ungroup_work' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Philipp Hachtmann 提交于
Use lowcore constant to improve the code generated for spinlocks. [ Martin Schwidefsky: patch breakdown and code beautification ] Signed-off-by: NPhilipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Philipp Hachtmann 提交于
Improve the spinlock code in several aspects: - Have _raw_compare_and_swap return true if the operation has been successful instead of returning the old value. - Remove the "volatile" from arch_spinlock_t and arch_rwlock_t - Rename 'owner_cpu' to 'lock' - Add helper functions arch_spin_trylock_once / arch_spin_tryrelease_once [ Martin Schwidefsky: patch breakdown and code beautification ] Signed-off-by: NPhilipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Philipp Hachtmann 提交于
The original bootmem allocator is getting replaced by memblock. To cover the needs of the s390 kdump implementation the physical memory list is used. With this patch the bootmem allocator and its bitmaps are completely removed from s390. Signed-off-by: NPhilipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 16 5月, 2014 3 次提交
-
-
由 Michael Mueller 提交于
This patch splits the SIE state guest prefix at offset 4 into a prefix bit field. Additionally it provides the access functions: - kvm_s390_get_prefix() - kvm_s390_set_prefix() to access the prefix per vcpu. Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Michael Mueller 提交于
The patch adds functionality to retrieve the IBC configuration by means of function sclp_get_ibc(). Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL operations will be interpreted instead of intercepted. A partial execution interception will occurr at the sending cpu only if the target cpu is in the wait state ("W" bit in the cpuflags set). Instruction interception will only happen in error cases (e.g. cpu addr invalid). As a sending cpu might set the external call interrupt pending flags at the target cpu at every point in time, we can't handle this kind of interrupt using our kvm interrupt injection mechanism. The injection will be done automatically by the SIE when preparing the start of the target cpu. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> CC: Thomas Huth <thuth@linux.vnet.ibm.com> [Adopt external call injection to check for sigp interpretion] Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 07 5月, 2014 2 次提交
-
-
由 Vincent Guittot 提交于
BOOK level is only relevant for s390 so we create a dedicated topology table with BOOK level and remove it from default table. Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Cc: cmetcalf@tilera.com Cc: benh@kernel.crashing.org Cc: dietmar.eggemann@arm.com Cc: preeti@linux.vnet.ibm.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/1397209481-28542-3-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Vincent Guittot 提交于
We replace the old way to configure the scheduler topology with a new method which enables a platform to declare additionnal level (if needed). We still have a default topology table definition that can be used by platform that don't want more level than the SMT, MC, CPU and NUMA ones. This table can be overwritten by an arch which either wants to add new level where a load balance make sense like BOOK or powergating level or wants to change the flags configuration of some levels. For each level, we need a function pointer that returns cpumask for each cpu, a function pointer that returns the flags for the level and a name. Only flags that describe topology, can be set by an architecture. The current topology flags are: SD_SHARE_CPUPOWER SD_SHARE_PKG_RESOURCES SD_NUMA SD_ASYM_PACKING Then, each level must be a subset on the next one. The build sequence of the sched_domain will take care of removing useless levels like those with 1 CPU and those with the same CPU span and no more relevant information for load balancing than its children. Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org> Tested-by: NDietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com> Reviewed-by: NDietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jason Low <jason.low2@hp.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux390@de.ibm.com Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/1397209481-28542-2-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 06 5月, 2014 1 次提交
-
-
由 Thomas Huth 提交于
The external interrupt interception can only occur in rare cases, e.g. when the PSW of the interrupt handler has a bad value. The old handler for this interception simply ignored these events (except for increasing the exit_external_interrupt counter), but for proper operation we either have to inject the interrupts manually or we should drop to userspace in case of errors. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 29 4月, 2014 1 次提交
-
-
由 David Hildenbrand 提交于
This patch enables the IBS facility when a single VCPU is running. The facility is dynamically turned on/off as soon as other VCPUs enter/leave the stopped state. When this facility is operating, some instructions can be executed faster for single-cpu guests. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 26 4月, 2014 2 次提交
-
-
由 Linus Torvalds 提交于
The mmu-gather operation 'tlb_flush_mmu()' has done two things: the actual tlb flush operation, and the batched freeing of the pages that the TLB entries pointed at. This splits the operation into separate phases, so that the forced batched flushing done by zap_pte_range() can now do the actual TLB flush while still holding the page table lock, but delay the batched freeing of all the pages to after the lock has been dropped. This in turn allows us to avoid a race condition between set_page_dirty() (as called by zap_pte_range() when it finds a dirty shared memory pte) and page_mkclean(): because we now flush all the dirty page data from the TLB's while holding the pte lock, page_mkclean() will be held up walking the (recently cleaned) page tables until after the TLB entries have been flushed from all CPU's. Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: NDave Hansen <dave.hansen@intel.com> Acked-by: NHugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christian Borntraeger 提交于
commit 0b60f9ea (s390: use device_remove_file_self() instead of device_schedule_callback()) caused random memory corruption on my s390 box. Turns out that the last element of the ccwgroup structure is of dynamic size, so we must move the newly introduced work structure _before_ the zero length array. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> CC: Tejun Heo <tj@kernel.org> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: Heiko Carstens <heiko.carstens@de.ibm.com> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> CC: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 4月, 2014 13 次提交
-
-
由 David Hildenbrand 提交于
This patch adds support to debug the guest using the PER facility on s390. Single-stepping, hardware breakpoints and hardware watchpoints are supported. In order to use the PER facility of the guest without it noticing it, the control registers of the guest have to be patched and access to them has to be intercepted(stctl, stctg, lctl, lctlg). All PER program interrupts have to be intercepted and only the relevant PER interrupts for the guest have to be given back. Special care has to be taken about repeated exits on the same hardware breakpoint. The intervention of the host in the guests PER configuration is not fully transparent. PER instruction nullification can not be used by the guest and too many storage alteration events may be reported to the guest (if it is activated for special address ranges only) when the host concurrently debugging it. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Introduce the methods to emulate the stctl and stctg instruction. Added tracing code. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
When a program interrupt was to be delivered until now, no program interrupt parameters were stored in the low-core of the target vcpu. This patch enables the delivery of those program interrupt parameters, takes care of concurrent PER events which can be injected in addition to any program interrupt and uses the correct instruction length code (depending on the interception code) for the injection of program interrupts. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Whenever a program interrupt is intercepted, some parameters are stored in the sie control block. These parameters have to be extracted in order to be reinjected correctly. This patch also takes care of intercepted PER events which can occurr in addition to any program interrupt. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Jens Freimann 提交于
per_perc_atmid is currently a two-byte field that combines two fields, the PER code and the PER Addressing-and-Translation-Mode Identification (ATMID) Let's make them accessible indepently and also rename per_cause to per_code. Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Jens Freimann 提交于
According to the Principles of Operation, at offset 0xA3 in the lowcore we have the "Architectural-Mode identification", not an "access identification". Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Heiko Carstens 提交于
Check if siif is available before setting. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Heiko Carstens 提交于
Add a 'struct kvm_s390_pgm_info pgm' member to kvm_vcpu_arch. This structure will be used if during instruction emulation in the context of a vcpu exception data needs to be stored somewhere. Also add a helper function kvm_s390_inject_prog_cond() which can inject vcpu's last exception if needed. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Heiko Carstens 提交于
Add 'union ctlreg0_bits' to easily allow setting and testing bits of control register 0 bits. This patch only adds the bits needed for the new guest access functions. Other bits and control registers can be added when needed. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Heiko Carstens 提交于
Introduce a 'struct psw' which makes it easier to decode and test if certain bits in a psw are set or are not set. In addition also add a 'psw_bits()' helper define which allows to directly modify and test a psw_t structure. E.g. psw_t psw; psw_bits(psw).t = 1; /* set dat bit */ Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Jens Freimann 提交于
Add a new data structure and function that allows to inject all kinds of interrupt as defined in the PoP Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Dominik Dingel 提交于
When userspace reset the guest without notifying kvm, the CMMA state of the pages might be unused, resulting in guest data corruption. To avoid this, CMMA must be enabled only if userspace understands the implications. CMMA must be enabled before vCPU creation. It can't be switched off once enabled. All subsequently created vCPUs will be enabled for CMMA according to the CMMA state of the VM. Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> [remove now unnecessary calls to page_table_reset_pgste]
-