Before adding any more global entry points into shmem.c, gather such
prototypes into shmem_fs.h.  Remove mm's own declarations from swap.h,
but for now leave the ones in mm.h: because shmem_file_setup() and
shmem_zero_setup() are called from various places, and we should not
force other subsystems to update immediately.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

You would expect to find vmtruncate_range() next to vmtruncate() in
mm/truncate.c: move it there.
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix 'make htmldocs' warnings:

  Warning(/include/linux/hrtimer.h:153): No description found for parameter 'clockid'
  Warning(/include/linux/device.h:604): Excess struct/union/enum/typedef member 'of_match' description in 'device'
  Warning(/include/net/sock.h:349): Excess struct/union/enum/typedef member 'sk_rmem_alloc' description in 'sock'
Signed-off-by: NVitaliy Ivanov <vitalivanov@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: queue: bring discard_granularity/alignment into line with SCSI
  mmc: queue: append partition subname to queue thread name
  mmc: core: make erase timeout calculation allow for gated clock
  mmc: block: switch card to User Data Area when removing the block driver
  mmc: sdio: reset card during power_restore
  mmc: cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
  mmc: sdhi: DMA slave ID 0 is invalid
  mmc: tmio: fix regression in TMIO_MMC_WRPROTECT_DISABLE handling
  mmc: omap_hsmmc: use original sg_len for dma_unmap_sg
  mmc: omap_hsmmc: fix ocr mask usage
  mmc: sdio: fix runtime PM path during driver removal
  mmc: Add PCI fixup quirks for Ricoh 1180:e823 reader
  mmc: sdhi: fix module unloading
  mmc: of_mmc_spi: add NO_IRQ define to of_mmc_spi.c
  mmc: vub300: fix null dereferences in error handling

commit 21a3c964 uses node_start/end_pfn(nid) for detection start/end
of nodes. But, it's not defined in linux/mmzone.h but defined in
/arch/???/include/mmzone.h which is included only under
CONFIG_NEED_MULTIPLE_NODES=y.

Then, we see
  mm/page_cgroup.c: In function 'page_cgroup_init':
  mm/page_cgroup.c:308: error: implicit declaration of function 'node_start_pfn'
  mm/page_cgroup.c:309: error: implicit declaration of function 'node_end_pfn'

So, fixiing page_cgroup.c is an idea...

But node_start_pfn()/node_end_pfn() is a very generic macro and
should be implemented in the same manner for all archs.
(m32r has different implementation...)

This patch removes definitions of node_start/end_pfn() in each archs
and defines a unified one in linux/mmzone.h. It's not under
CONFIG_NEED_MULTIPLE_NODES, now.

A result of macro expansion is here (mm/page_cgroup.c)

for !NUMA
 start_pfn = ((&contig_page_data)->node_start_pfn);
  end_pfn = ({ pg_data_t *__pgdat = (&contig_page_data); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;});

for NUMA (x86-64)
  start_pfn = ((node_data[nid])->node_start_pfn);
  end_pfn = ({ pg_data_t *__pgdat = (node_data[nid]); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;});

Changelog:
 - fixed to avoid using "nid" twice in node_end_pfn() macro.
Reported-and-acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Reported-and-tested-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  btrfs: fix inconsonant inode information
  Btrfs: make sure to update total_bitmaps when freeing cache V3
  Btrfs: fix type mismatch in find_free_extent()
  Btrfs: make sure to record the transid in new inodes

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: prevent bogus assert when trying to remove non-existent attribute
  xfs: clear XFS_IDIRTY_RELEASE on truncate down
  xfs: reset inode per-lifetime state when recycling it

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-multitouch: add support for a new Lumio dual-touch panel
  HID: hid-multitouch: correct VID for Stantum panels
  HID: hid-multitouch: ensure slots are initialized

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: pm: ensure ARMv7 CPUs save and restore the TLS register
  ARM: pm: proc-v7: fix missing struct processor pointers for suspend code
  ARM: 6969/1: plat-iop: fix build error
  ARM: 6961/1: zImage: Add build-time check for correctly-sized proc_type entries
  ARM: SMP: wait for CPU to be marked active
  ARM: 6963/1: Thumb-2: Relax relocation requirements for non-function symbols
  ARM: 6962/1: mach-h720x: fix build error
  ARM: 6959/1: SMP build fix for entry-macro-multi.S

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] allow setting of upper 32 bit in smp_ctl_set_bit
  [S390] hwsampler: Set a sane default sampling rate
  [S390] s390: enforce HW limits for the initial sampling rate
  [S390] kvm-s390: fix kconfig dependencies

When iputting the inode, We may leave the delayed nodes if they have some
delayed items that have not been dealt with. So when the inode is read again,
we must look up the relative delayed node, and use the information in it to
initialize the inode. Or we will get inconsonant inode information, it may
cause that the same directory index number is allocated again, and hit the
following oops:

[ 5447.554187] err add delayed dir index item(name: pglog_0.965_0) into the
insertion tree of the delayed node(root id: 262, inode id: 258, errno: -17)
[ 5447.569766] ------------[ cut here ]------------
[ 5447.575361] kernel BUG at fs/btrfs/delayed-inode.c:1301!
[SNIP]
[ 5447.790721] Call Trace:
[ 5447.793191]  [<ffffffffa0641c4e>] btrfs_insert_dir_item+0x189/0x1bb [btrfs]
[ 5447.800156]  [<ffffffffa0651a45>] btrfs_add_link+0x12b/0x191 [btrfs]
[ 5447.806517]  [<ffffffffa0651adc>] btrfs_add_nondir+0x31/0x58 [btrfs]
[ 5447.812876]  [<ffffffffa0651d6a>] btrfs_create+0xf9/0x197 [btrfs]
[ 5447.818961]  [<ffffffff8111f840>] vfs_create+0x72/0x92
[ 5447.824090]  [<ffffffff8111fa8c>] do_last+0x22c/0x40b
[ 5447.829133]  [<ffffffff8112076a>] path_openat+0xc0/0x2ef
[ 5447.834438]  [<ffffffff810c58e2>] ? __perf_event_task_sched_out+0x24/0x44
[ 5447.841216]  [<ffffffff8103ecdd>] ? perf_event_task_sched_out+0x59/0x67
[ 5447.847846]  [<ffffffff81121a79>] do_filp_open+0x3d/0x87
[ 5447.853156]  [<ffffffff811e126c>] ? strncpy_from_user+0x43/0x4d
[ 5447.859072]  [<ffffffff8111f1f5>] ? getname_flags+0x2e/0x80
[ 5447.864636]  [<ffffffff8111f179>] ? do_getname+0x14b/0x173
[ 5447.870112]  [<ffffffff8111f1b7>] ? audit_getname+0x16/0x26
[ 5447.875682]  [<ffffffff8112b1ab>] ? spin_lock+0xe/0x10
[ 5447.880882]  [<ffffffff81112d39>] do_sys_open+0x69/0xae
[ 5447.886153]  [<ffffffff81112db1>] sys_open+0x20/0x22
[ 5447.891114]  [<ffffffff813b9aab>] system_call_fastpath+0x16/0x1b

Fix it by reusing the old delayed node.
Reported-by: NJim Schutt <jaschut@sandia.gov>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Tested-by: NJim Schutt <jaschut@sandia.gov>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: mark CONFIG_CIFS_NFSD_EXPORT as BROKEN
  cifs: free blkcipher in smbhash

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  cifs: propagate errors from cifs_get_root() to mount(2)
  cifs: tidy cifs_do_mount() up a bit
  cifs: more breakage on mount failures
  cifs: close sget() races
  cifs: pull freeing mountdata/dropping nls/freeing cifs_sb into cifs_umount()
  cifs: move cifs_umount() call into ->kill_sb()
  cifs: pull cifs_mount() call up
  sanitize cifs_umount() prototype
  cifs: initialize ->tlink_tree in cifs_setup_cifs_sb()
  cifs: allocate mountdata earlier
  cifs: leak on mount if we share superblock
  cifs: don't pass superblock to cifs_mount()
  cifs: don't leak nls on mount failure
  cifs: double free on mount failure
  take bdi setup/destruction into cifs_mount/cifs_umount
Acked-by: NSteve French <smfrench@gmail.com>

SCSI defines discard alignment as the offset to the first
optimal discard.  In the case of SD/MMC, that is always zero
which is the default.

SCSI defines discard granularity as a hint of a optimal
discard size.  That is much better expressed by the MMC
"preferred erase size" (pref_erase) field.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

For example, an eMMC with 2 boot partitions will have 3 threads.
The names change from:

   40 ?        00:00:00 mmcqd/0
   41 ?        00:00:00 mmcqd/0
   42 ?        00:00:00 mmcqd/0

to:

   40 ?        00:00:00 mmcqd/0
   41 ?        00:00:00 mmcqd/0boot0
   42 ?        00:00:00 mmcqd/0boot1
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Andrei Warkentin <andreiw@motorola.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

The erase timeout calculation may depend on clock rate
which is zero if the clock is gated, so use
mmc_host_clk_rate() which allows for that case.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

The MMC block driver and other drivers (e.g. mmc-test) will expect
the card to be switched to the User Data Area eMMC partition when
they start.  Hence the MMC block driver should ensure it is that
way when it is removed.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Andrei Warkentin <andreiw@motorola.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

mmc_sdio_power_restore() skips some steps that are performed in other
power-related codepaths which are necessary to fully reset the card.
Without this, runtime PM fails for SD8686 SDIO wifi on OLPC XO-1.5.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NChris Ball <cjb@laptop.org>

HAVE_EFFICIENT_UNALIGNED_ACCESS is a config option, therefore it needs
the CONFIG_ before it when used by the preprocessor.
Signed-off-by: NJames Hogan <james@albanarts.com>
Acked-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NChris Ball <cjb@laptop.org>

Don't try to allocate DMA resources if the platform didn't specify
positive DMA slave IDs.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NChris Ball <cjb@laptop.org>

Commit b6147490 ("mmc: tmio: split core functionality, DMA and
MFD glue") broke handling of the TMIO_MMC_WRPROTECT_DISABLE flag by
the tmio-mmc driver. This patch restores the original behaviour.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: NChris Ball <cjb@laptop.org>

Don't use the returned sg_len from dma_map_sg() as inparameter
to dma_unmap_sg(). Use the original sg_len for both dma_map_sg
and dma_unmap_sg according to the documentation in DMA-API.txt.
Signed-off-by: NPer Forlin <per.forlin@linaro.org>
Reviewed-by: NVenkatraman S <svenkatr@ti.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

The OMAP HSMMC driver uses an ocr_mask to determine the list of voltages
supported by the card. It populates this mask based on the list of
voltages supported by the regulator that supplies the voltage.

Commit 64be9782 (omap4 hsmmc: Update ocr mask for MMC2 for regulator
to use) passed a fixed ocr_mask from the OMAP4 SDP board file to limit
the voltage to 2.9-3.0 Volts, and updated the driver to use this mask
if provided, instead of using the regulator's supported voltages.

However the commit is buggy - the ocr_mask is overridden by the
regulator's capabilities anyway. Fix this.

(The bug shows up when a system-wide suspend is attempted on the OMAP4
SDP/Blaze platforms. The eMMC card comes up at 3V, but drops to 1.65V
after the system resumes).
Signed-off-by: NAnand Gadiyar <gadiyar@ti.com>
Acked-by: NBalaji T K <balajitk@ti.com>
Acked-by: NVenkatraman S <svenkatr@ti.com>
Tested-by: NKishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: NSourav Poddar <sourav.poddar@ti.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

After commit e1866b33 "PM / Runtime: Rework runtime PM handling
during driver removal" was introduced, the driver core stopped
incrementing the runtime PM usage counter of the device during
the invocation of the ->remove() callback.

This indirectly broke SDIO's runtime PM path during driver removal,
because no one calls _put_sync() anymore after ->remove() completes.

This means that the power of runtime-PM-managed SDIO cards is kept
high after their driver is removed (even if it was powered down
beforehand).

Fix that by directly calling _put_sync() when the last usage
counter is downref'ed by the SDIO bus.
Reported-and-tested-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

Merge branch 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rtc: vt8500: Fix build error & cleanup rtc_class_ops->update_irq_enable()
  alarmtimers: Return -ENOTSUPP if no RTC device is present
  alarmtimers: Handle late rtc module loading

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: Remove unneeded version.h includes from sound/
  ASoC: pxa-ssp: Correct check for stream presence
  ASoC: imx: add missing module informations
  ASoC: imx: Remove unused Kconfig SND_MXC_SOC_SSI entry
  ALSA: HDA: Pinfix quirk for HP Z200 Workstation
  ALSA: VIA HDA: Create a master amplifier control for VT1718S.
  ALSA: VIA HDA: Mute/unmute mixer conncted to Headphone for VT1718S.
  ALSA: VIA HDA: Modify initial verbs list for VT1718S.
  ALSA: hda - Remove ALC268 model override for CPR2000
  ALSA: HDA: Remove quirk for an HP device
  ASoC: Remove unused and about to be broken SND_SOC_CUSTOM I/O bus

A user reported this bug again where we have more bitmaps than we are supposed
to.  This is because we failed to load the free space cache, but don't update
the ctl->total_bitmaps counter when we remove entries from the tree.  This patch
fixes this problem and we should be good to go again.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

data parameter should be u64 because a full-sized chunk flags field is
passed instead of 0/1 for distinguishing data from metadata.  All
underlying functions expect u64.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Merge branch 'fortglx/3.0/tip/timers/rtc' of git://git.linaro.org/people/jstultz/linux into timers/urgent

  * rtc: vt8500: Fix build error & cleanup rtc_class_ops->update_irq_enable()

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
  drm/i915: save/resume forcewake lock fixes
  Revert "drm/i915: Kill GTT mappings when moving from GTT domain"
  drm/i915: Apply HWSTAM workaround for BSD ring on SandyBridge
  drm/i915: Call intel_enable_plane from i9xx_crtc_mode_set (again)

... instead of just failing with -EINVAL
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

if cifs_get_root() fails, we end up with ->mount() returning NULL,
which is not what callers expect.  Moreover, in case of superblock
reuse we end up leaking a superblock reference...
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

have ->s_fs_info set by the set() callback passed to sget()
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

all callers of cifs_umount() proceed to do the same thing; pull it into
cifs_umount() itself.
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

instead of calling it manually in case if cifs_read_super() fails
to set ->s_root, just call it from ->kill_sb().  cifs_put_super()
is gone now *and* we have cifs_sb shutdown and destruction done
after the superblock is gone from ->s_instances.
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... to the point prior to sget().  Now we have cifs_sb set up early
enough.
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

a) superblock argument is unused
b) it always returns 0
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

no need to wait until cifs_read_super() and we need it done
by the time cifs_mount() will be called.
Acked-by: NPavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>