Atomic mode set requires us to refactor existing vmw_stdu_crtc_set_config
code into sections that check the validity of the new mode, and sections
that actually program the hardware state.

vmw_du_crtc_atomic_check() takes CRTC-related checking code.  In a later
patch, vmw_du_primary_plane_atomic_check() will take framebuffer-related
checking code.

These helpers won't be called until we flip on the atomic support
flag or set drm_crtc_funcs->set_config to using the atomic
helper.

v2:
* The state->num_connector is actually the total number of potential
  connectors, not just the one associated with the display unit.
  The proper one to check is ->connector_mask.

* Add the check to only allow plane state to be the same as crtc state
  (Thanks to mlankhorst)

* Make sure to turn on SVGA mode before using VRAM.  SVGA mode is
  disabled in master_drop if dbdev is not running.

v3:
* Moved dot clock override to crtc_atomic_check
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>

Add connector handling functions. Start tracking is_implicity in
the connector state.  Eventually, this field should be tracked
exclusively in a connector state.

Now that plane and connector states have been created, we can also
activate the code that use CRTC state.
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

Add plane state handling functions.

We have to keep track of a few plane states so we cannot use the
DRM helper for this.

Created vmw_plane_state along with functions to reset, duplicate,
and destroty it.

v2
* Removed cursor clean up special case
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>

Create and Add CRTC state.  We currently do not track any properties
or custom states so we can technically use the DRM helpers.  Creating
this code just to make potential future additions easier.

Most of the new code will be compiled but not enabled until
plane/connector state handling code is also in place.

This is the first of a series to enable atomic mode set for vmwgfx.

The atomic enabling effort was done in collaboration with Thomas
Hellstrom and the VMware Graphics Team.
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

Universal support is prerequisite for atomic mode set.

Explicitly create planes for the cursor and the primary FB.  With
a functional cursor plane, the DRM will no longer use the legacy
cursor_set2 and cursor_move entry points.
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

This field is not being used anymore
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

New stuff for 4.12:
- Preliminary vega10 support
- Support for multi-level page tables
- GPU sensor stuff for mesa
- job tracing improvements
- PRT support for sparse buffers
- Additional SR-IOV improvements
- ttm improvements
- misc bug fixes and code cleanups

* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (315 commits)
  drm/amdgpu: Fix 32bit x86 compilation warning
  drm/amdgpu: just disallow reading untouched registers
  drm/amdgpu: remove duplicate allowed reg CP_CPF_BUSY_STAT
  drm/amdgpu/soc15: enable psp block for SRIOV
  drm/amdgpu/soc15: bypass pp block for vf
  drm/amdgpu/psp: add check sOS sign
  drm/amd/amdgpu: Correct ring wptr address in debugfs (v2)
  drm/amdgpu: Fix multi-level page table bugs for large BOs v3
  drm/amdgpu: Fix Vega10 VM initialization
  drm/amdgpu: Make max_pfn 64-bit
  drm/amdgpu: drop GB_GPU_ID from the golden settings
  drm/amdgpu: fix vm pte pde flags to 64-bit for sdma (v3)
  drm/amd/amdgpu: fix Tonga S3 resume hang on rhel6.8
  drm/ttm: decrease ttm bo priority number
  drm/amd/amdgpu: fix performance drop when VRAM pressure
  drm/amdgpu: Couple small warning fixes
  drm/amdgpu: Clean up GFX 9 VM fault messages
  drm/amdgpu: Register UTCL2 as a source of VM faults
  drm/amdgpu/soc15: drop support for reading some registers
  drm/amdgpu/soc15: return cached values for some registers (v2)
  ...

drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c:187:2: warning: right shift count >= width of type [enabled by default]
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c:173:2: warning: right shift count >= width of type [enabled by default]
drivers/gpu/drm/amd/amdgpu/vega10_ih.c:106:3: warning: right shift count >= width of type [enabled by default]

v2: Add a space between "&" and "0xff"

Reported by: kbuild-all@01.org
Signed-off-by: NAlex Xie <AlexBin.Xie@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not sure what the original intention was here, but returning a random piece of
kernel memory to userspace because we didn't set the value at all is clearly
not a good idea.

This patch disallows reading the register and returns
a proper error code instead.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NTom St Denis <tom.stdenis@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove duplicate mmCP_CPF_BUSY_STAT from the allowed registers.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SRIOV can support for loading ucode with PSP block, enable it.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Disable pp block if device is  vf.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMonk Liu <Monk.Liu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Confirm if sys driver and sOS are already been loaded through sOS
sign register, skip loading sys driver and sOS if finding the sign.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On gfx9 hardware the value is not wrapped and is a 64-bit value.  So
we reduce it modulo the ring size.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

(v2) use buf_mask instead of computing on the fly
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the start/end address calculation for address ranges that span
multiple page directories in amdgpu_vm_alloc_levels.

Add error messages if page tables aren't found. Otherwise the page
table update would just fail silently.

v2:
 * Change WARN_ON to WARN_ON_ONCE
 * Move masking of high address bits to caller
 * Add range-check for "from" and "to"
v3:
 * Replace WARN_ON_ONCE in get_pt with pr_err in caller
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

adev->family is not initialized yet when amdgpu_get_block_size is
called. Use adev->asic_type instead.

Minimum VM size is 512GB, not 256GB, for a single page table entry
in the root page table.

gmc_v9_0_vm_init is called after adev->vm_manager.max_pfn is
initialized. Move the minimum VM-size enforcement ahead of max_pfn
initializtion. Cast to 64-bit before the left-shift.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With 4-level page tables the maximum VM size is 256TB. That's 64G
pages, which can't be represented in 32-bit.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

That register is marked deprecated, reading it results in a bus error.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: fix for all sdma engines
v3: squash in fix for SI/CI
Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. security firmware loading has moved to sw init, so this code
   is useless.
2. it seems that driver could not call request_firmware on
   kernel 2.6, when S3 resume. for request firmware depends on
   userspace, at this time, userspace is freeze.
Signed-off-by: NJim Qu <Jim.Qu@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

decrease and also reserve priority number for KFD using
Signed-off-by: NRoger.He <Hongbo.He@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When VRAM pressue and trigger huge evictions there is performance drop,
this patch fix it.
Signed-off-by: NRoger.He <Hongbo.He@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clean up the VM fault message format and use rate-limiting similar
to other ASICs.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The RB harvest registers are not necessary, the driver already
exposes this info via the info ioctl.  GB_BACKEND_MAP has
been deprecated since SI and is not relevant to the RB mapping.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required for SR-IOV and saves MMIO transactions.

v2: drop cached RB harvest registers
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Match what we do for other asics.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We check the mem config register to make sure it's been
programmed by the vbios to determine if we need to post
so we check for a non-0 value.  However, when the asic
comes out of reset, we may see all ones here, so check
for that too.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This used by DAL ISR logic for VBLANK handling.
Signed-off-by: NAndrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1) Adapt to vulkan:
Now use double SWITCH BUFFER to replace the 128 nops w/a,
because when vulkan introduced, umd can insert 7 ~ 16 IBs
per submit which makes 256 DW size cannot hold the whole
DMAframe (if we still insert those 128 nops), CP team suggests
use double SWITCH_BUFFERs, instead of tricky 128 NOPs w/a.

2) To fix the CE VM fault issue when MCBP introduced:
Need one more COND_EXEC wrapping IB part (original one us
for VM switch part).

this change can fix vm fault issue caused by below scenario
without this change:

>CE passed original COND_EXEC (no MCBP issued this moment),
 proceed as normal.

>DE catch up to this COND_EXEC, but this time MCBP issued,
 thus DE treats all following packages as NOP. The following
 VM switch packages now looks just as NOP to DE, so DE
 dosen't do VM flush at all.

>Now CE proceeds to the first IBc, and triggers VM fault,
 because DE didn't do VM flush for this DMAframe.

3) change estimated alloc size for gfx9.
with new DMAframe scheme, we need modify emit_frame_size
for gfx9

4) No need to insert 128 nops after gfx8 vm flush anymore
because there was double SWITCH_BUFFER append to vm flush,
and for gfx7 we already use double SWITCH_BUFFER following
after vm_flush so no change needed for it.

5) Change emit_frame_size for gfx8

v2: squash in BUG removal from Monk
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

those MC_VM registers won't be programed by VBIOS in VF
so driver is responsible to programe them.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ring_write_multiple should use buf_mask instead of ptr_mask
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

for SRIOV we cannot use access register when in IRQ routine
with regular KIQ method
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

no CG for SRIOV on SOC15
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

no hw_fini for SRIOV, otherwise other VF will be affected
no CG for SRIOV
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

must set minor_update.enable before write smaller value
to wptr/doorbell, so for sriov we need set that register
bit in hw_init period.

this could fix the SDMA ring test fail after guest reboot
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ring->buf_mask need be set prior to ring_clear_ring invoke
and fix ring_clear_ring as well which should use buf_mask
instead of ptr_mask
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this must be invoked during early init
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when MCBP supported, we will set pre_enb bit for those
IBs with PREEMPT flag tagged
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>