- 09 11月, 2017 6 次提交
-
-
由 Chris Wilson 提交于
The handling of contexts are peculiar. Instead of tieing their vma to activity, we pin the context. This means that we cannot simply unbind the context object itself at will (which would normally cause us to wait for the vma to be idle), but must manually idle the GPU and retire requests first. A consequence of this peculiarity is when doing a last desperate attempt to recover memory. If the memory is tied up inside active context objects, we will fail to recover any memory simply by trying to unbind the objects without first doing a wait-for-idle. A side-effect of removing the call to shrinker_lock_uninterruptible() from i915_gem_shrinker_oom() was that we removed an unlocked wait-for-idle, and so lost the "natural" shrinkage of context objects. By replacing that with a locked wait from inside i915_gem_shrink(), we not only replace it with the ability to recover all context objects, but do so for all i915_gem_shrink_all() callers. v2: Switching requires request allocation, which is not permitted from inside the shrinker as it only uses ordinary allocations. References: https://bugs.freedesktop.org/show_bug.cgi?id=102936 Fixes: f2123818 ("drm/i915: Move dev_priv->mm.[un]bound_list to its own lock") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171108094400.1386-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 2f6a3783) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
An oversight in commit 87701b4b ("drm/i915: Only free the oldest stale object before a fresh allocation") was that not only do we have to serialise concurrent users of llist_del_first(), but we also have to lock llist_del_first() vs llist_del_all(). From llist.h, * This can be summarized as follows: * * | add | del_first | del_all * add | - | - | - * del_first | | L | L * del_all | | | - * * Where, a particular row's operation can happen concurrently with a column's * operation, with "-" being no lock needed, while "L" being lock is needed. This should hopefully explain: <4>[ 89.287106] general protection fault: 0000 [#1] PREEMPT SMP <4>[ 89.287126] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp i915 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core r8169 mii mei_me mei snd_pcm prime_numbers i2c_hid pinctrl_geminilake pinctrl_intel <4>[ 89.287226] CPU: 2 PID: 23 Comm: ksoftirqd/2 Tainted: G U 4.14.0-rc8-CI-CI_DRM_3315+ #1 <4>[ 89.287247] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4>[ 89.287270] task: ffff88017ab34ec0 task.stack: ffffc90000128000 <4>[ 89.287290] RIP: 0010:llist_add_batch+0x4/0x20 <4>[ 89.287301] RSP: 0018:ffffc9000012bdb8 EFLAGS: 00010296 <4>[ 89.287314] RAX: ffffffff811017ad RBX: 6e468801a1560000 RCX: ef3e53fceecdeb81 <4>[ 89.287330] RDX: 6e468801a1566130 RSI: ffff880103d73d98 RDI: ffff880103d73d98 <4>[ 89.287346] RBP: ffffc9000012bdb8 R08: ffff88017ab35780 R09: 0000000000000000 <4>[ 89.287361] R10: ffffc9000012bd68 R11: 00000000abb18c3d R12: ffffffffa01369e0 <4>[ 89.287377] R13: ffff88017fd1b8f8 R14: ffff88017ab34ec0 R15: 000000000000000a <4>[ 89.287393] FS: 0000000000000000(0000) GS:ffff88017fd00000(0000) knlGS:0000000000000000 <4>[ 89.287411] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 89.287424] CR2: 00007ff0c0755018 CR3: 000000016df9b000 CR4: 00000000003406e0 <4>[ 89.287440] Call Trace: <4>[ 89.287511] __i915_gem_free_object_rcu+0x20/0x40 [i915] <4>[ 89.287527] rcu_process_callbacks+0x27a/0x730 <4>[ 89.287544] __do_softirq+0xc0/0x4ae <4>[ 89.287559] ? smpboot_thread_fn+0x2d/0x280 <4>[ 89.287571] run_ksoftirqd+0x1f/0x70 <4>[ 89.287582] smpboot_thread_fn+0x18a/0x280 <4>[ 89.287595] kthread+0x114/0x150 <4>[ 89.287605] ? sort_range+0x30/0x30 <4>[ 89.287615] ? kthread_create_on_node+0x40/0x40 <4>[ 89.287628] ret_from_fork+0x27/0x40 <4>[ 89.287641] Code: 0d 48 83 ea 01 4c 89 c1 48 83 fa ff 74 12 48 23 0c d7 74 ed 48 c1 e2 06 48 0f bd c9 48 8d 04 0a 5d c3 90 90 90 90 90 55 48 89 e5 <48> 8b 0a 48 89 0e 48 89 c8 f0 48 0f b1 3a 48 39 c1 75 ed 48 85 <1>[ 89.287774] RIP: llist_add_batch+0x4/0x20 RSP: ffffc9000012bdb8 <4>[ 89.287826] ---[ end trace e775d15174d8ae02 ]--- (Lockless lists are only easy (and lockless) when only using llist_add/llist_del_all!) Fixes: 87701b4b ("drm/i915: Only free the oldest stale object before a fresh allocation") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171106111508.11941-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> (cherry picked from commit f991c492) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Maarten Lankhorst 提交于
The watermarks it should calculate against are the old optimal watermarks. The currently active crtc watermarks are pure fiction, and are invalid in case of a nonblocking modeset, page flip enabling/disabling planes or any other reason. When the crtc is disabled or during a modeset the intermediate watermarks don't need to be programmed separately, and could be directly assigned to the optimal watermarks. Changes since v1: - Use intel_atomic_get_old_crtc_state. (ville) Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-2-maarten.lankhorst@linux.intel.com [mlankhorst: Add cc stable and bugzilla link, since previous patch doesn't fix issue by itself] Cc: stable@vger.kernel.org #v4.8+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373 (cherry picked from commit b6b178a7) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Joonas Lahtinen 提交于
When running under virtualization (vGPU active), we must disable the lazy PPGTT page table initialization optimization introduced by commit 14826673 ("drm/i915: Only initialize partially filled pagetables"). We must do this because GVT-g makes unduly assumptions about guest behaviour, which this optimization breaks. This results in following looking errors in the host: ERROR gvt: guest page write error -22, gfn 0x7ada8, pa 0x7ada89a8, var 0x6, len 1 The real fix is to not to depend on i915 driver behaviour, but instead either rely on only the contracts that i915 has with the hardware, or add some paravirtualization. While the real fix is en route, it won't be finished in time for 4.15, so the best option is to disable the optimization for now when vGPU is active to avoid breaking 4.15 guests in existing VM environments. Fixes: 14826673 ("drm/i915: Only initialize partially filled pagetables") Suggested-by: NXiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: NXiaolin Zhang <xiaolin.zhang@intel.com> [Joonas: Rewrote the commit message and added tags.] Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NZhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023153209.10527-1-joonas.lahtinen@linux.intel.com (cherry picked from commit 22a8a4fc) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
Originally we set the priority to max upon inserting the request into the execlists queue (and removing it from the scheduler lists). We could then use the prio==INT_MAX as a shortcut within execlists_schedule() to detect the end of the dependency chain. Since commit 1f181225 ("drm/i915/execlists: Keep request->priority for its lifetime") this is no longer true as we use the request completion as an indicator the schedule dependency chain is complete instead. (This allows us to then reschedule requests even when its context is in flight.) However, this makes the GEM_BUG_ON() inside execlists_schedule() racy as we may change the rq->prio at the same time. As the assertion is useful, let's keep the assertion and remove the micro-optimisation. Fixes: 1f181225 ("drm/i915/execlists: Keep request->priority for its lifetime") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171024115501.21033-1-chris@chris-wilson.co.ukReviewed-by: NMichał Winiarski <michal.winiarski@intel.com> (cherry picked from commit 64b80085) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
Back in commit a4b2b015 ("drm/i915: Don't mark an execlists context-switch when idle") we noticed the presence of late context-switch interrupts. We were able to filter those out by looking at whether the ELSP remained active, but in commit beecec90 ("drm/i915/execlists: Preemption!") that became problematic as we now anticipate receiving a context-switch event for preemption while ELSP may be empty. To restore the spurious interrupt suppression, add a counter for the expected number of pending context-switches and skip if we do not need to handle this interrupt to make forward progress. v2: Don't forget to switch on for preempt. v3: Reduce the counter to a on/off boolean tracker. Declare the HW as active when we first submit, and idle after the final completion event (with which we confirm the HW says it is idle), and track each source of activity separately. With a finite number of sources, it should aide us in debugging which gets stuck. Fixes: beecec90 ("drm/i915/execlists: Preemption!") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023213237.26536-3-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> (cherry picked from commit 4a118ecb) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 06 11月, 2017 1 次提交
-
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
some more amd/ttm fixes. * 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: drm/ttm: Downgrade pr_err to pr_debug for memory allocation failures drm/ttm: Always and only destroy bo->ttm_resv in ttm_bo_release_list drm/amd/amdgpu: Enabling ACP clock in hw_init (v2) drm/amdgpu/virt: don't dereference undefined 'module' struct
-
- 04 11月, 2017 4 次提交
-
-
由 Michel Dänzer 提交于
Memory allocation failure should generally be handled gracefully by callers. In particular, with transparent hugepage support, attempts to allocate huge pages can fail under memory pressure, but the callers fall back to allocating individual pages instead. In that case, there would be spurious [TTM] Unable to get page %u error messages in dmesg. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michel Dänzer 提交于
Fixes a use-after-free due to a race condition in ttm_bo_cleanup_refs_and_unlock, which allows one task to reserve a BO and destroy its ttm_resv while another task is waiting for it to signal in reservation_object_wait_timeout_rcu. v2: * Always initialize bo->ttm_resv in ttm_bo_init_reserved (Christian König) Fixes: 0d2bd2ae "drm/ttm: fix memory leak while individualizing BOs" Reviewed-by: Chunming Zhou <david1.zhou@amd.com> # v1 Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Akshu Agrawal 提交于
Enabling of ACP in hw_init does away with requirement of order of probe on designware_i2s and acp dma driver. designware_i2s reads i2s registers and this use to fail if acp dma driver was not probed prior to it. BUG=:b:62103837 TEST=modprobe snd-soc-acp-pcm modprobe snd-soc-acp-rt5645-mach aplay -l **** List of PLAYBACK Hardware Devices **** card 0: acprt5650 [acprt5650], device 0: RT5645_AIF1 rt5645-aif1-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 v2: use proper device in dev_err to fix warnings (Alex) Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://chromium-review.googlesource.com/670207Reviewed-by: NJason Clinton <jclinton@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/676628Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
git://anongit.freedesktop.org/drm/drm-intel由 Dave Airlie 提交于
This time really the last i915 batch for v4.15: - PSR state tracking in crtc state (Ville) - Fix eviction when the GGTT is idle but full (Chris) - BDW DP aux channel timeout fix (James) - LSPCON detection fixes (Shashank) - Use for_each_pipe to iterate over pipes (Mika Kahola) - Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha) - Refactoring and preparation for DDI encoder type cleanup (Ville) - Broadwell DDI FDI buf translation fix (Chris) - Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan) - GuC/HuC firmware loader refactoring (Michal) - Make shrinking more effective and not stall so much (Chris) - Cannonlake PLL fixes (Rodrigo) - DP MST connector error propagation fixes (James) - Convert timers to use timer_setup (Kees Cook) - Skylake plane enable/disable unification (Juha-Pekka) - Fix to actually free driver internal objects when requested (Chris) - DDI buf trans refactoring (Ville) - Skip waking the device to service pwrite (Chris) - Improve DSI VBT backlight parsing abstraction (Madhav) - Cannonlake VBT DDC pin mapping fix (Rodrigo) * tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits) drm/i915: Update DRIVER_DATE to 20171023 drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin. drm/i915: Let's use more enum intel_dpll_id pll_id. drm/i915: Use existing DSI backlight ports info drm/i915: Parse DSI backlight/cabc ports. drm/i915: Skip waking the device to service pwrite drm/i915/crt: split compute_config hook by platforms drm/i915: remove g4x lowfreq_avail and has_pipe_cxsr drm/i915: Drop the redundant hdmi prefix/suffix from a lot of variables drm/i915: Unify error handling for missing DDI buf trans tables drm/i915: Centralize the SKL DDI A/E vs. B/C/D buf trans handling drm/i915: Kill off the BXT buf_trans default_index drm/i915: Pass encoder type to cnl_ddi_vswing_sequence() explicitly drm/i915: Integrate BXT into intel_ddi_dp_voltage_max() drm/i915: Pass the level to intel_prepare_hdmi_ddi_buffers() drm/i915: Pass the encoder type explicitly to skl_set_iboost() drm/i915: Extract intel_ddi_get_buf_trans_hdmi() drm/i915: Relocate intel_ddi_get_buf_trans_*() functions drm/i915: Flush the idle-worker for debugfs/i915_drop_caches drm/i915: adjust get_crtc_fence_y_offset() to use base.y instead of crtc.y ...
-
- 03 11月, 2017 9 次提交
-
-
由 Arnd Bergmann 提交于
Accessing the THIS_MODULE directly is only possible when modules are enabled, otherwise we get a build failure: drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c: In function 'amdgpu_virt_init_data_exchange': drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:331:20: error: dereferencing pointer to incomplete type 'struct module' Further, THIS_MODULE is NULL when the driver is built-in, so the code would likely cause a NULL pointer dereference. This adds an #ifdef check to avoid the compile-time error, plus a NULL pointer check before dereferencing THIS_MODULE. It might be better to find a way to avoid using the module version altogether. Fixes: 2dc8f81e ("drm/amdgpu: SR-IOV data exchange between PF&VF") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Reviewed-By: NXiangliang Yu <Xiangliang.Yu@amd.com>
-
git://github.com/skeggsb/linux由 Dave Airlie 提交于
nouveau next fixes. Fixes arm32 build. * 'linux-4.15' of git://github.com/skeggsb/linux: drm/nouveau/bios/timing: mark expected switch fall-throughs drm/nouveau/devinit/nv04: mark expected switch fall-throughs drm/nouveau/bios: make const arrays hwsq_signature and edid_sig static drm/nouveau/core/memory: fix missing mutex unlock drm/nouveau/mmu: swap out round for ALIGN
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1260018 Addresses-Coverity-ID: 1260019 Addresses-Coverity-ID: 1260022 Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 143119 Addresses-Coverity-ID: 143120 Addresses-Coverity-ID: 143121 Addresses-Coverity-ID: 143122 Addresses-Coverity-ID: 143123 Addresses-Coverity-ID: 143124 Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Colin Ian King 提交于
Don't populate arrays hwsq_signature and edid_sig on the stack but instead make them static. Makes the object code smaller by over 190 bytes: Before: text data bss dec hex filename 35676 3312 64 39052 988c nouveau_bios.o After: text data bss dec hex filename 35319 3472 64 38855 97c7 nouveau_bios.o (gcc version 7.2.0 x86_64) Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Rounding value is guaranteed to be power-of-two, so this is better anyway. Fixes build on 32-bit. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
git://people.freedesktop.org/~gabbayo/linux由 Dave Airlie 提交于
- Usermode Events The current events code implemented some data structures (waitqueue, fifo) that were already implemented in the kernel. The patches below addresses this issue by replacing them with the standard kernel implementation. In addition, they simplify allocation of events IDs and memory for the events. The patches also increase the maximum number of events while maintaining compatibility with the older userspace library. - Remove radeon support Because Kaveri is fully supported in amdgpu and because current and future versions of userspace libraries will only support amdgpu, we removed radeon support from kfd. Current users can move to amdgpu while using the same userspace libraries. - Various bug fixes and cleanups * tag 'drm-amdkfd-next-2017-11-02' of git://people.freedesktop.org/~gabbayo/linux: (26 commits) drm/amdkfd: Minor cleanups drm/amdkfd: Update queue_count before mapping queues drm/amdkfd: Cleanup DQM ASIC-specific ops drm/amdkfd: Register/Deregister process on qpd resolution drm/amdkfd: Fix debug unregister procedure on process termination drm/amdkfd: Avoid calling amd_iommu_unbind_pasid() when suspending drm/amdkfd: Disable CP/SDMA ring/doorbell in MQD drm/amdkfd: Clean up the data structure in kfd_process drm/radeon: deprecate and remove KFD interface drm/amdkfd: use a high priority workqueue for IH work drm/amdkfd: wait only for IH work on IH exit drm/amdkfd: increase IH num entries to 8192 drm/amdkfd: use standard kernel kfifo for IH drm/amdkfd: increase limit of signal events to 4096 per process drm/amdkfd: Make event limit dependent on user mode mapping size drm/amdkfd: Use IH context ID for signal lookup drm/amdkfd: Simplify event ID and signal slot management drm/amdkfd: Simplify events page allocator drm/amdkfd: Use wait_queue_t to implement event waiting drm/amdkfd: remove redundant kfd_event_waiter.input_index ...
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Some amdgpu/ttm fixes. * 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: wrong control mode cause the fan spins faster unnecessarily drm/amd/powerplay: fix memory leak of hardcoded pptable drm/amdgpu:add fw-vram-usage for atomfirmware drm/radeon: fix atombios on big endian drm/ttm:fix memory leak due to individualize drm/amdgpu: fix error handling in amdgpu_bo_do_create drm/ttm: once more fix ttm_buffer_object_transfer drm/amd/powerplay: change ASIC temperature reading on Vega10
-
- 02 11月, 2017 20 次提交
-
-
git://github.com/skeggsb/linux由 Dave Airlie 提交于
- Pascal temperature sensor support - Improved BAR2 handling, greatly reduces time required to suspend - Rework of the MMU code - Allows us to properly support Pascal's new MMU layout (implemented) - Lays the groundwork for improved userspace APIs later - Misc other fixes * 'linux-4.15' of git://github.com/skeggsb/linux: (151 commits) drm/nouveau/gr/gf100-: don't prevent module load if firmware missing drm/nouveau/mmu: remove old vmm frontend drm/nouveau: improve selection of GPU page size drm/nouveau: switch over to new memory and vmm interfaces drm/nouveau: remove unused nouveau_fence_work() drm/nouveau: queue delayed unmapping of VMAs on client workqueue drm/nouveau: implement per-client delayed workqueue with fence support drm/nouveau: determine memory class for each client drm/nouveau: pass handle of vmm object to channel allocation ioctls drm/nouveau: switch to vmm limit drm/nouveau: allocate vmm object for every client drm/nouveau: replace use of cpu_coherent with memory types drm/nouveau: use nvif_mmu_type to determine BAR1 caching drm/nouveau: fetch memory type indices that we care about for ttm drm/nouveau: consolidate handling of dma mask drm/nouveau: check kind validity against mmu object drm/nouveau: allocate mmu object for every client drm/nouveau: remove trivial cases of nvxx_device() usage drm/nouveau/mmu: define user interfaces to mmu vmm opertaions drm/nouveau/mmu: define user interfaces to mmu memory allocation ...
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Enables the use of Pascal's 2MiB pages for larger buffers. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
VMAs are about to not take references on the VMM they belong to, which means more care is required when handling delayed unmapping. Queuing it on the client workqueue ensures all pending VMA unmaps will have completed before the VMM is destroyed. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
This is already handled in the top-level gem_new() ioctl in another manner, but this will be removed in a future commit. Ideally we'd not need to check up-front at all, and let the VMM code handle error checking, but there are paths in the current BO management code where this isn't possible due to map() not always being called during BO creation, and map() calls not being allowed to fail during buffer migration. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-