The tc35815-mac platform device used a pci bus number and a devfn to
identify its target device, but the pci bus number may vary if some
bus-bridges are found.  Use irq number which is be unique for embedded
controllers.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The JMPRS register on Malta boards keeps a 32-bit CPU-endian
value. The readw() function assumes that the value it reads is a
little-endian 16-bit number. Therefore, using readw() to obtain
the value of the JMPRS register is a mistake. This error leads
to incorrect reading of the PCI clock frequency on big-endian
during board start-up.

Change readw() to __raw_readl().

This was tested by injecting a call to printk() and verifying
that the value of the jmpr variable was consistent with current
setting of the JP4 "PCI CLK" jumper.
Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fix compile warning (which becomes compile error due to -Werror).  Type of
argument "flags" for spin_lock_irqsave() was incorrect in some functions.
Signed-off-by: NFrank Rowand <frank.rowand@am.sony.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It was moved to arch/x86/lguest/Kconfig, but I lost the deletion part in a
patch suffle.  My confused one-liner "fix" to turn it on is also reverted:
84f7466eSigned-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The i386 and x86_64 arch directories contain nothing but a generated symlink
to arch/x86/boot/bzImage when a tree a built.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The PDC202xx older devices do not support ATAPI DMA via the usual
interfaces. What documentation I have isn't sufficient to support DMA and
it isn't clear if the Windows drivers do this or it is possible at all.
(Neither do the drivers/ide old drivers)

So turn it ATAPI DMA off, these are disk optimised controllers.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ipath: Fix receiving UD messages with immediate data

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (31 commits)
  Replace cpmac fix
  dl2k: the rest
  dl2k: MSCR, MSSR, ESR, PHY_SCR fixes
  dl2k: BMSR fixes
  dl2k: ANAR, ANLPAR fixes
  dl2k: BMCR_t fixes
  3c574, 3c515 bitfields abuse
  sbni endian fixes
  wan/lmc bitfields fixes
  dscc4 endian fixes
  S2io: Fixed synchronization between scheduling of napi with card reset and close
  atl1: fix frame length bug
  Documentation: add a guideline for hard_start_xmit method
  Revert "sky2: remove check for PCI wakeup setting from BIOS"
  e1000e Kconfig: remove ref to nonexistant docs
  bonding: Don't hold lock when calling rtnl_unlock
  bonding: fix lock ordering for rtnl and bonding_rwsem
  bonding: Fix up parameter parsing
  bonding: release slaves when master removed via sysfs
  bonding: fix locking during alb failover and slave removal
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] clarify watchdog operation in documentation
  [WATCHDOG] Revert "Stop looking for device as soon as one is found"

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86: add support for the latest Intel processors to Oprofile

There's currently no way to turn on Lguest guest support; the planned
Kconfig virtualization reorg didn't get into 2.6.25.

This was unnoticed because if you already had CONFIG_LGUEST_GUEST=y in
your config, it worked.  Too bad about new users...

Also, the Kconfig help was wrong now the virtio drivers are merged.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The latest Intel processors (the 45nm ones) have a model number of 23
(old ones had 15); they're otherwise compatible on the oprofile side.
This patch adds the new model number to the oprofile code.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

It was not clear what the difference is/was between the 
nowayout feature and the Magic Close feature.
Signed-off-by: N"Andrew Dyer" <amdyer@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This reverts commit 3ff6eb4a.

the !found check in the for loop allready made sure that only one
device was found.
Signed-Off-By: NPádraig Brady <P@draigBrady.com>
Signed-Off-By: NWim Van Sebroeck <wim@iguana.be>

Please apply this patch since i reverted by mistake
the commit 4e3ab47a
in 6cd043d9Signed-off-by: NMatteo Croce <technoboy85@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

remove an unused union-with-bitfield of the same sort,
add missing conversions in debugging printk
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

same story, different registers...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

broken use of bitfields; FUBAR on big-endian (and not valid C,
strictly speaking).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

wn3_config is shared by these cards; the way we deal with it is both bad C
(union abuse) and broken on big-endian.  For 3c515 it's less serious (ISA
cards are quite rare outside of little-endian boxen), but 3c574 is a pcmcia
one and that'd better be endian-independent...  Fix is the same in both
cases.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

- Fixed synchronization between scheduling of napi with card reset and close
  by moving the enabling and disabling of napi to card up and card down
  functions respectively instead of open and close.
Signed-off-by: NSurjit Reang <surjit.reang@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The driver sets up the hardware to accept a frame with max length
equal to MTU + Ethernet header + FCS + VLAN tag, but we neglect to
add the VLAN tag size to the ingress buffer.  When a VLAN-tagged
frame arrives, the hardware passes it, but bad things happen
because the buffer is too small.  This patch fixes that.

Thanks to David Harris for reporting the bug and testing the fix.
Tested-by: NDavid Harris <david.harris@cpni-inc.com>
Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add a guideline not to modify SKBs.
Signed-off-by: NMatti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This reverts commit 84cd2dfb.

Some BIOS's break if Wake On Lan is enabled, and the machine
can't boot. Better to have some user's have to call ethtool to
enable WOL than to break a single user's boot.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

There is no Documentation/networking/e1000e.txt.
Signed-off-by: NJason Uhlenkott <jasonuhl@jasonuhl.org>
Cc: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'ipg-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into upstream-fixes

Change bond_mii_monitor to not hold any locks when calling rtnl_unlock,
as rtnl_unlock can sleep (when acquring another mutex in netdev_run_todo).

Bug reported by Makito SHIOKAWA <mshiokawa@miraclelinux.com>, who
included a different patch.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix the handling of rtnl and the bonding_rwsem to always be acquired
in a consistent order (rtnl, then bonding_rwsem).

The existing code sometimes acquired them in this order, and sometimes
in the opposite order, which opens a window for deadlock between ifenslave
and sysfs.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	A recent change to add an additional hash policy modified
bond_parse_parm, but it now does not correctly match parameters passed in
via sysfs.

	Rewrote bond_parse_parm to handle (a) parameter matches that
are substrings of one another and (b) user input with whitespace (e.g.,
sysfs input often has a trailing newline).
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Add a call to bond_release_all in the bonding netdev event
handler for the master.  This releases the slaves for the case of, e.g.,
"echo -bond0 > /sys/class/net/bonding_masters", which otherwise will spin
forever waiting for references to be released.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	alb_fasten_mac_swap (actually rlb_teach_disabled_mac_on_primary)
requries RTNL and no other locks.  This could cause dev_set_promiscuity
and/or dev_set_mac_address to be called with improper locking.

	Changed callers to hold only RTNL during calls to alb_fasten_mac_swap
or functions calling it.  Updated header comments in affected functions to
reflect proper reality of locking requirements.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Move an ASSERT_RTNL down to where we should hold only RTNL;
the existing check produces spurious warnings because we hold additional
locks at _bh, tripping a debug warning in spin_lock_mutex().
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Fix the functions that store the primary and active slave
options via sysfs to hold the correct locks in the correct order.

	The bond_change_active_slave and bond_select_active_slave
functions both require rtnl, bond->lock for read and curr_slave_lock for
write_bh, and no other locks.  This is so that the lower level
mode-specific functions (notably for balance-alb mode) can release locks
down to just rtnl in order to call, e.g., dev_set_mac_address with the
locks it expects (rtnl only).
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ALPS - fix sync loss on Acer Aspire 5720ZG
  Input: psmouse - fix input_dev leak in lifebook driver
  Input: psmouse - fix potential memory leak in psmouse_connect()
  Input: usbtouchscreen - fix buffer overflow, make more egalax work
  Input: mousedev - handle mice that use absolute coordinates

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  [NIU]: Fix 1G PHY link state handling.
  [NET]: Fix TX timeout regression in Intel drivers.