Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 24 3月, 2011 1 次提交
  3. 10 3月, 2011 1 次提交
  5. 21 1月, 2011 2 次提交
  7. 30 12月, 2010 1 次提交
    • S
      of/flattree: Add Kconfig for EARLY_FLATTREE · e6ce1324
      由 Stephen Neuendorffer 提交于 
      The device tree code is now in two pieces: some which can be used generically
on any platform which selects CONFIG_OF_FLATTREE, and some early which is used
at boot time on only a few architectures.  This patch segregates the early
code so that only those architectures which care about it need compile it.
This also means that some of the requirements in the early code (such as
a cmd_line variable) that most architectures (e.g. X86) don't provide
can be ignored.
Signed-off-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
[grant.likely@secretlab.ca: remove extra blank line addition]
[grant.likely@secretlab.ca: fixed incorrect #ifdef CONFIG_EARLY_FLATTREE check]
[grant.likely@secretlab.ca: Made OF_EARLY_FLATTREE select instead of depend
                            on OF_FLATTREE]
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
      e6ce1324
  9. 29 11月, 2010 2 次提交
  11. 18 11月, 2010 1 次提交
  13. 25 10月, 2010 1 次提交
  15. 19 10月, 2010 1 次提交
    • P
      irq_work: Add generic hardirq context callbacks · e360adbe
      由 Peter Zijlstra 提交于 
      Provide a mechanism that allows running code in IRQ context. It is
most useful for NMI code that needs to interact with the rest of the
system -- like wakeup a task to drain buffers.

Perf currently has such a mechanism, so extract that and provide it as
a generic feature, independent of perf so that others may also
benefit.

The IRQ context callback is generated through self-IPIs where
possible, or on architectures like powerpc the decrementer (the
built-in timer facility) is set to generate an interrupt immediately.

Architectures that don't have anything like this get to do with a
callback from the timer tick. These architectures can call
irq_work_run() at the tail of any IRQ handlers that might enqueue such
work (like the perf IRQ handler) to avoid undue latencies in
processing the work.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NKyle McMartin <kyle@mcmartin.ca>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
[ various fixes ]
Signed-off-by: NHuang Ying <ying.huang@intel.com>
LKML-Reference: <1287036094.7768.291.camel@yhuang-dev>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e360adbe
  17. 20 9月, 2010 1 次提交
  19. 03 8月, 2010 1 次提交
  21. 31 7月, 2010 1 次提交
  23. 27 7月, 2010 1 次提交
  25. 14 7月, 2010 1 次提交
  27. 09 7月, 2010 1 次提交
  29. 08 7月, 2010 1 次提交
  31. 06 7月, 2010 4 次提交
  33. 22 6月, 2010 1 次提交
    • K
      powerpc, hw_breakpoints: Implement hw_breakpoints for 64-bit server processors · 5aae8a53
      由 K.Prasad 提交于 
      Implement perf-events based hw-breakpoint interfaces for PowerPC
64-bit server (Book III S) processors.  This allows access to a
given location to be used as an event that can be counted or
profiled by the perf_events subsystem.

This is done using the DABR (data breakpoint register), which can
also be used for process debugging via ptrace.  When perf_event
hw_breakpoint support is configured in, the perf_event subsystem
manages the DABR and arbitrates access to it, and ptrace then
creates a perf_event when it is requested to set a data breakpoint.

[Adopted suggestions from Paul Mackerras <paulus@samba.org> to
- emulate_step() all system-wide breakpoints and single-step only the
  per-task breakpoints
- perform arch-specific cleanup before unregistration through
  arch_unregister_hw_breakpoint()
]
Signed-off-by: NK.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      5aae8a53
  35. 28 5月, 2010 1 次提交
  37. 25 5月, 2010 1 次提交
    • S
      powerpc/kexec: Add support for FSL-BookE · b3df895a
      由 Sebastian Andrzej Siewior 提交于 
      This adds support kexec on FSL-BookE where the MMU can not be simply
switched off. The code borrows the initial MMU-setup code to create the
identical mapping mapping. The only difference to the original boot code
is the size of the mapping(s) and the executeable address.
The kexec code maps the first 2 GiB of memory in 256 MiB steps. This
should work also on e500v1 boxes.
SMP support is still not available.

(Kumar: Added minor change to build to ifdef CONFIG_PPC_STD_MMU_64 some
code that was PPC64 specific)
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
      b3df895a
  39. 07 4月, 2010 1 次提交
  41. 19 3月, 2010 1 次提交
    • F
      powerpc: Remove IOMMU_VMERGE config option · 191aee58
      由 FUJITA Tomonori 提交于 
      The description says:

 Cause IO segments sent to a device for DMA to be merged virtually
 by the IOMMU when they happen to have been allocated contiguously.
 This doesn't add pressure to the IOMMU allocator. However, some
 drivers don't support getting large merged segments coming back
 from *_map_sg().

 Most drivers don't have this problem; it is safe to say Y here.

It's out of date. Long ago, drivers didn't have a way to tell IOMMUs
about their segment length limit (that is, the maximum segment length
that they can handle). So IOMMUs merged as many segments as possible
and gave too large segments to drivers.

dma_get_max_seg_size() was introduced to solve the above
problem. Device drives can use the API to tell IOMMU about the maximum
segment length that they can handle. In addition, the default limit
(64K) should be safe for everyone.

So this config option seems to be unnecessary.

Note that this config option just enables users to disable the virtual
merging by default. Users can still disable the virtual merging by the
boot parameter.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      191aee58
  43. 13 3月, 2010 1 次提交
  45. 17 2月, 2010 1 次提交
    • D
      powerpc/booke: Introduce new CONFIG options for advanced debug registers · 172ae2e7
      由 Dave Kleikamp 提交于 
      powerpc/booke: Introduce new CONFIG options for advanced debug registers

From: Dave Kleikamp <shaggy@linux.vnet.ibm.com>

Introduce new config options to simplify the ifdefs pertaining to the
advanced debug registers for booke and 40x processors:

CONFIG_PPC_ADV_DEBUG_REGS - boolean: true for dac-based processors
CONFIG_PPC_ADV_DEBUG_IACS - number of IAC registers
CONFIG_PPC_ADV_DEBUG_DACS - number of DAC registers
CONFIG_PPC_ADV_DEBUG_DVCS - number of DVC registers
CONFIG_PPC_ADV_DEBUG_DAC_RANGE - DAC ranges supported

Beginning conservatively, since I only have the facilities to test 440
hardware.  I believe all 40x and booke platforms support at least 2 IAC
and 2 DAC registers.  For 440, 4 IAC and 2 DVC registers are enabled, as
well as the DAC ranges.
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Acked-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      172ae2e7
  47. 03 2月, 2010 1 次提交
    • A
      powerpc: Increase NR_IRQS Kconfig maximum to 32768 · 859aefc5
      由 Anton Blanchard 提交于 
      With dynamic irq descriptors the overhead of a large NR_IRQS is much lower
than it used to be. With more MSI-X capable adapters and drivers exploiting
multiple vectors we may as well allow the user to increase it beyond the
current maximum of 512.

32768 seems large enough that we'd never have to bump it again (although I bet
my prediction is horribly wrong). It boot tests OK and the vmlinux footprint
increase is only around 500kB due to:

struct irq_map_entry irq_map[NR_IRQS];

We format /proc/interrupts correctly with the previous changes:

             CPU0       CPU1       CPU2       CPU3       CPU4       CPU5
  286:          0          0          0          0          0          0
  516:          0          0          0          0          0          0
16689:       1833          0          0          0          0          0
17157:          0          0          0          0          0          0
17158:        319          0          0          0          0          0
25092:          0          0          0          0          0          0
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      859aefc5
  49. 13 12月, 2009 1 次提交
  51. 09 12月, 2009 1 次提交
    • N
      sysfs/cpu: Add probe/release files · 12633e80
      由 Nathan Fontenot 提交于 
      Version 3 of this patch is updated with documentation added to
Documentation/ABI.  There are no changes to any of the C code from v2
of the patch.

In order to support kernel DLPAR of CPU resources we need to provide an
interface to add (probe) and remove (release) the resource from the system.
This patch Creates new generic probe and release sysfs files to facilitate
cpu probe/release.  The probe/release interface provides for allowing each
arch to supply their own routines for implementing the backend of adding
and removing cpus to/from the system.

This also creates the powerpc specific stubs to handle the arch callouts
from writes to the sysfs files.

The creation and use of these files is regulated by the
CONFIG_ARCH_CPU_PROBE_RELEASE option so that only architectures that need the
capability will have the files created.
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      12633e80
  53. 24 11月, 2009 1 次提交
  55. 12 11月, 2009 1 次提交
  57. 30 10月, 2009 4 次提交
    • M
      powerpc: Enable sparse irq_descs on powerpc · cd015707
      由 Michael Ellerman 提交于 
      Defining CONFIG_SPARSE_IRQ enables generic code that gets rid of the
static irq_desc array, and replaces it with an array of pointers to
irq_descs.

It also allows node local allocation of irq_descs, however we
currently don't have the information available to do that, so we just
allocate them on all on node 0.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      cd015707
    • M
      powerpc: Make NR_IRQS a CONFIG option · 551b81f2
      由 Michael Ellerman 提交于 
      The irq_desc array consumes quite a lot of space, and for systems
that don't need or can't have 512 irqs it's just wasted space.

The first 16 are reserved for ISA, so the minimum of 32 is really
16 - and no one has asked for more than 512 so leave that as the
maximum.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      551b81f2
    • A
      powerpc: Make it possible to select hibernation on all PowerPCs · 64eb38a6
      由 Anton Vorontsov 提交于 
      Just as with kexec, hibernation may fail even on well-tested platforms:
some PCI device, a driver of which doesn't play well with hibernation,
is enough to break resuming.

Hibernation code is not much platform dependent, and hiding features only
because these were not verified on a particular hardware is
counterproductive: we just prevent the features from being widely tested.

For example, with this patch I just tested hibernation on a MPC83xx
board, and it works quite well, modulo a few drivers that need some
fixing.

So, let's make it possible to select hibernation support for all
PowerPCs, then let's wait for any possible bug reports, and actually fix
(or just collect ;-) the bugs instead of hiding them. If some platforms
really can't stand hibernation, we can make a blacklist, with proper
comments why exactly hibernation doesn't work, whether it is possible to
fix, and what needs to be done to fix it.

CONFIG_HIBERNATION is still =n by default, so the commit doesn't change
anything apart from ability to set it to =y.

I'm not sure if EXPERIMENTAL dependency is needed, I'd rather not add it
for a few reasons:

1) It doesn't matter much, for distro kernels user has no clue that some
   feature is experimental. Majority of defconfigs enable EXPERIMENTAL
   anyway (90 vs. 4, which, btw, means that EXPERIMENTAL is overused
   in Kconfigs);

2) EXPERIMENTAL is a good thing for features that change default
   behaviour of a kernel, while for hibernation user has to explicitly
   issue 'echo disk > /sys/power/state' to trigger any hibernation bugs;

3) Per init/Kconfig, EXPERIMENTAL is a good thing to scare and discourage
   users from 'widespread use of a feature', while we want to encourage
   that use.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      64eb38a6
    • B
      powerpc: Cleanup Kconfig selection of hugetlbfs support · 5a1eb5c4
      由 Benjamin Herrenschmidt 提交于 
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      5a1eb5c4
  59. 24 9月, 2009 1 次提交
    • A
      powerpc: Increase NODES_SHIFT on 64bit from 4 to 8 · ea55bf29
      由 Anton Blanchard 提交于 
      Some System p configurations can already have more than 16 nodes so we
need to increase NODES_SHIFT. I chose 256 to give us some room to grow in the
future, although we can look at something smaller if the memory bloat is
considered too much.

Unless we clamp MAX_ACTIVE_REGIONS we end up with 300kB of extra bloat in
early_node_map in mm/page_alloc.c:

< 6144   early_node_map
> 307200 early_node_map

due to:

    #if MAX_NUMNODES >= 32
      /* If there can be many nodes, allow up to 50 holes per node */
      #define MAX_ACTIVE_REGIONS (MAX_NUMNODES*50)
    #else
      /* By default, allow up to 256 distinct regions */
    #define MAX_ACTIVE_REGIONS 256

Since our memory is mostly contiguous it seems reasonable to keep this
at 256 for now. I also set 32bit to 32 to save space (is there any chance
a 32bit system will have more than 32 discontiguous memory ranges?).

Even with that fixed we have a few data structures that grow:

< 896   bootmem_node_data
> 14336 bootmem_node_data

< 1280  node_devices
> 20480 node_devices

< 25088 kmalloc_caches
> 59648 kmalloc_caches

< 1632  hstates
> 21792 hstates
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      ea55bf29
  61. 21 9月, 2009 1 次提交
    • I
      perf: Do the big rename: Performance Counters -> Performance Events · cdd6c482
      由 Ingo Molnar 提交于 
      Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )
Suggested-by: NStephane Eranian <eranian@google.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Reviewed-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      cdd6c482
  63. 28 8月, 2009 1 次提交