Some PCI devices (e.g. 3c905B, 3c556B) lose all configuration
(including BARs) when transitioning from D3hot->D0.  This leaves such
a device in an inaccessible state.  The patch below causes the BARs
to be restored when enabling such a device, so that its driver will
be able to access it.

The patch also adds pci_restore_bars as a new global symbol, and adds a
correpsonding EXPORT_SYMBOL_GPL for that.

Some firmware (e.g. Thinkpad T21) leaves devices in D3hot after a
(re)boot.  Most drivers call pci_enable_device very early, so devices
left in D3hot that lose configuration during the D3hot->D0 transition
will be inaccessible to their drivers.

Drivers could be modified to account for this, but it would
be difficult to know which drivers need modification.  This is
especially true since often many devices are covered by the same
driver.  It likely would be necessary to replicate code across dozens
of drivers.

The patch below should trigger only when transitioning from D3hot->D0
(or at boot), and only for devices that have the "no soft reset" bit
cleared in the PM control register.  I believe it is safe to include
this patch as part of the PCI infrastructure.

The cleanest implementation of pci_restore_bars was to call
pci_update_resource.  Unfortunately, that does not currently exist
for the sparc64 architecture.  The patch below includes a null
implemenation of pci_update_resource for sparc64.

Some have expressed interest in making general use of the the
pci_restore_bars function, so that has been exported to GPL licensed
modules.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

For systems with multiple hotplug controllers, you need to use more than
just the slot number to uniquely name the slot.  Without a unique slot
name, the pci_hp_register() will fail.  This patch adds the bus number
to the name.
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert i386/pci to use io_remap_pfn_range instead of remap_pfn_range.
This is good for Xen which reuses i386/pci/i386.c for domain 0 code.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This cleans up some of the #ifdef CONFIG_PCI stuff up, and moves the pci register
info out to a separate file, where it belongs.  Eventually we can stop including
this file from within pci.h, but lots of code needs to be audited first.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes CONFIG_PCI_NAMES.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make PCI fixup data const, so it'll end up in a r/o section.

This also fixes the conversion into ECOFF which gets broken by too many
changes between r/w and r/o sections.  Call it a hack but it's a change
that's correct by itself.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Run PCI driver initialization on local node

Instead of adding messy kmalloc_node()s everywhere run the
PCI driver probe on the node local to the device.

This would not have helped for IDE, but should for
other more clean drivers that do more initialization in probe().
It won't help for drivers that do most of the work
on first open (like many network drivers)
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently rpaphp registers the following bus types as hotplug slots:
1) Actual PCI Hotplug slots
2) Embedded/Internal PCI slots
3) PCI Host Bridges

The second and third bus types are not actually direct parents of
removable adapters.  As such, the rpaphp has special case code to fake
results for attributes like power, adapter status, etc.  This patch
removes types 2 and 3 from the rpaphp module.

This patch also changes the DLPAR module so that slots can be
DLPAR-added/removed without having been designated as hotplug-capable.
Signed-off-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch exports rpaphp_config_pci_adapter() for use by the rpadlpar
module.  It also changes this function by removing any dependencies on
struct slot.  The patch also changes the RPA DLPAR-add path to enable
newly-added slots in a separate step from that which registers them as
hotplug slots.
Signed-off-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The rpaphp module currently uses a fragile method to find a pci device
by its device node.  This function is unnecessary, so this patch scraps
it.
Signed-off-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The slot structure in the rpaphp module currently references the PCI
contents of the slot using the PCI device of the parent bridge.  This
is unnecessary, since the module is actually interested in the
subordinate bus of the bridge.  The dependency on a PCI bridge device
also prohibits the module from registering hotplug slots that have a
root bridge as a parent, since root bridges on PPC64 don't have PCI
devices.

This patch changes struct slot to reference the PCI subsystem using a
pci_bus rather than a pci_dev.
Signed-off-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently, rpaphp registers Virtual I/O slots as hotplug slots.  The
only purpose of this registration is to ensure that the VIO subsystem
is notified of new VIO buses during DLPAR adds.  Similarly, rpaphp
notifies the VIO subsystem when a VIO bus is DLPAR-removed.  The rpaphp
module has special case code to fake results for attributes like power,
adapter status, etc.

The VIO register/unregister functions could just as easily be made from
the DLPAR module.  This patch moves the VIO registration calls to the
DLPAR module, and removes the VIO fluff from rpaphp altogether.
Signed-off-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Subject line says it all :)
Signed-off-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When we copy 32bit ->msg_control contents to kernel, we walk the same
userland data twice without sanity checks on the second pass.

Second version of this patch: the original broke with 64-bit arches
running 32-bit-compat-mode executables doing sendmsg() syscalls with
unaligned CMSG data areas

Another thing is that we use kmalloc() to allocate and sock_kfree_s()
to free afterwards; less serious, but also needs fixing.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NChris Wright <chrisw@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

head_4xx.S wasn't compiling due to a missing #endif
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ICH6 spec defines the PORT_ bits as:

PORT_ENABLED (R/W):

  0 = Disabled.  The port is in the off state and cannot detect any
  devices.

  1 = Enabled.  The port can transition between the on, partial, and
  slumber states and can detect devices.

PORT_PRESENT  (R/O)

  The status of this bit may change at any time.  This bit is cleared
  when the port is disabled via PORT_ENABLED.  This bit is not cleared upon
  surprise removal of a device.

So from a textual view it is not necessary that PORT_PRESENT _must_ be set,
especially if a device detection has to be done anyway.  And, in fact, this
is the view that ACER has been taken with its new Laptops (e.g.  Travelmate
4150).

And the definition of PORT_ENABLED / PORT_PRESENT is mixed up, btw.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJens Axboe <axboe@suse.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NNathan Scott <nathans@sgi.com>

Signed-off-by: NEric Sandeen <sandeen@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

Christoph).

SGI-PV: 942400
SGI-Modid: xfs-linux-melb:xfs-kern:23771a
Signed-off-by: NNathan Scott <nathans@sgi.com>

With the previous commit that introduces the klist enhancements, we can
now re-do 2b7d6a8c again.

The problem is that klists claim to provide semantics for safe traversal of
lists which are being modified.  The failure case is when traversal of a
list causes element removal (a fairly common case).  The issue is that
although the list node is refcounted, if it is embedded in an object (which
is universally the case), then the object will be freed regardless of the
klist refcount leading to slab corruption because the klist iterator refers
to the prior element to get the next.

The solution is to make the klist take and release references to the
embedding object meaning that the embedding object won't be released until
the list relinquishes the reference to it.

(akpm: fast-track this because it's needed for the 2.6.13 scsi merge)
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Revert commit 2b7d6a8c.

The "fix" was known to not even compile.  Duh.  That's not a fix.
That's just stupid.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds support for the SiS182 sata chipset. This is a
minimalistic version of the patch from
http://bugme.osdl.org/show_bug.cgi?id=4192. Basically, it add the PCI
IDs and handles the change of the 2nd port adress register.
Signed-Off-By: NArnaud Patard <apatard@mandriva.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that asm-powerpc/* is using ifdefs on __powerpc64__ we need to add it
to CHECKFLAGS on ppc64.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>