As we forward the whole SCA provided by guest 2, we can directly forward
SIIF if available.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Let's provide the 64-bit-SCAO facility to guest 2, so he can set up a SCA
for guest 3 that has a 64 bit address. Please note that we already require
the 64 bit SCAO for our vsie implementation, in order to forward the SCA
directly (by pinning the page).
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As soon as guest 2 is allowed to use run-time-instrumentation (indicated
via via STFLE), it can also enable it for guest 3.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As soon as guest 2 is allowed to use the vector facility (indicated via
STFLE), it can also enable it for guest 3. We have to take care of the
sattellite block that might be used when not relying on lazy vector
copying (not the case for KVM).
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As soon as guest 2 is allowed to use transactional execution (indicated via
STFLE), he can also enable it for guest 3.

Active transactional execution requires also the second prefix page to be
mapped. If that page cannot be mapped, a validity icpt has to be presented
to the guest.

We have to take care of tx being toggled on/off, otherwise we might get
wrong prefix validity icpt.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As soon as message-security-assist extension 3 is enabled for guest 2,
we have to allow key wrapping for guest 3.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Issuing STFLE is extremely rare. Instead of copying 2k on every
VSIE call, let's do this lazily, when a guest 3 tries to execute
STFLE. We can setup the block and retry.

Unfortunately, we can't directly forward that facility list, as
we only have a 31 bit address for the facility list designation.
So let's use a DMA allocation for our vsie_page instead for now.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Introduced with ESOP, therefore available for the guest if it
is allowed to use ESOP.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If guest 2 is allowed to use edat 1 / edat 2, it can also set it up for
guest 3, so let's properly check and forward the edat cpuflags.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As soon as we forward an ibc to guest 2 (indicated via
kvm->arch.model.ibc), he can also use it for guest 3. Let's properly round
the ibc up/down, so we avoid any potential validity icpts from the
underlying SIE, if it doesn't simply round the values.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

In order to not always map the prefix, we have to take care of certain
aspects that implicitly unmap the prefix:
- Changes to the prefix address
- Changes to MSO, because the HVA of the prefix is changed
- Changes of the gmap shadow (e.g. unshadowed, asce or edat changes)

By properly handling these cases, we can stop remapping the prefix when
there is no reason to do so.

This also allows us now to not acquire any gmap shadow locks when
rerunning the vsie and still having a valid gmap shadow.

Please note, to detect changing gmap shadows, we have to keep the reference
of the gmap shadow. The address of a gmap shadow does otherwise not
reliably indicate if the gmap shadow has changed (the memory chunk
could get reused).
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch adds basic support for nested virtualization on s390x, called
VSIE (virtual SIE) and allows it to be used by the guest if the necessary
facilities are supported by the hardware and enabled for the guest.

In order to make this work, we have to shadow the sie control block
provided by guest 2. In order to gain some performance, we have to
reuse the same shadow blocks as good as possible. For now, we allow
as many shadow blocks as we have VCPUs (that way, every VCPU can run the
VSIE concurrently).

We have to watch out for the prefix getting unmapped out of our shadow
gmap and properly get the VCPU out of VSIE in that case, to fault the
prefix pages back in. We use the PROG_REQUEST bit for that purpose.

This patch is based on an initial prototype by Tobias Elpelt.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Let's introduce that helper.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Nested virtualization will have to enable own gmaps. Current code
would enable the wrong gmap whenever scheduled out and back in,
therefore resulting in the wrong gmap being enabled.

This patch reenables the last enabled gmap, therefore avoiding having to
touch vcpu->arch.gmap when enabling a different gmap.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The default kvm gmap notifier doesn't have to handle shadow gmaps.
So let's just directly exit in case we get notified about one.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Let's not fault in everything in read-write but limit it to read-only
where possible.

When restricting access rights, we already have the required protection
level in our hands. When reading from guest 2 storage (gmap_read_table),
it is obviously PROT_READ. When shadowing a pte, the required protection
level is given via the guest 2 provided pte.

Based on an initial patch by Martin Schwidefsky.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

It will be very helpful to have a mechanism to check without any locks
if a given gmap shadow is still valid and matches the given properties.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

For nested virtualization, we want to know if we are handling a protection
exception, because these can directly be forwarded to the guest without
additional checks.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We have no known user of real-space designation and only support it to
be architecture compliant.

Gmap shadows with real-space designation are never unshadowed
automatically, as there is nothing to protect for the top level table.

So let's simply limit the number of such shadows to one by removing
existing ones on creation of another one.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We can easily support real-space designation just like EDAT1 and EDAT2.
So guest2 can provide for guest3 an asce with the real-space control being
set.

We simply have to allocate the biggest page table possible and fake all
levels.

There is no protection to consider. If we exceed guest memory, vsie code
will inject an addressing exception (via program intercept). In the future,
we could limit the fake table level to the gmap page table.

As the top level page table can never go away, such gmap shadows will never
get unshadowed, we'll have to come up with another way to limit the number
of kept gmap shadows.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Just like we already do with ste protection, let's take rte protection
into account. This way, the host pte doesn't have to be mapped writable.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If the guest is enabled for EDAT2, we can easily create shadows for
guest2 -> guest3 provided tables that make use of EDAT2.

If guest2 references a 2GB page, this memory looks consecutive for guest2,
but it does not have to be so for us. Therefore we have to create fake
segment and page tables.

This works just like EDAT1 support, so page tables are removed when the
parent table (r3t table entry) is changed.

We don't hve to care about:
- ACCF-Validity Control in RTTE
- Access-Control Bits in RTTE
- Fetch-Protection Bit in RTTE
- Common-Region Bit in RTTE

Just like for EDAT1, all bits might be dropped and there is no guaranteed
that they are active.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If the guest is enabled for EDAT1, we can easily create shadows for
guest2 -> guest3 provided tables that make use of EDAT1.

If guest2 references a 1MB page, this memory looks consecutive for guest2,
but it might not be so for us. Therefore we have to create fake page tables.

We can easily add that to our existing infrastructure. The invalidation
mechanism will make sure that fake page tables are removed when the parent
table (sgt table entry) is changed.

As EDAT1 also introduced protection on all page table levels, we have to
also shadow these correctly.

We don't have to care about:
- ACCF-Validity Control in STE
- Access-Control Bits in STE
- Fetch-Protection Bit in STE
- Common-Segment Bit in STE

As all bits might be dropped and there is no guaranteed that they are
active ("unpredictable whether the CPU uses these bits", "may be used").
Without using EDAT1 in the shadow ourselfes (STE-format control == 0),
simply shadowing these bits would not be enough. They would be ignored.

Please note that we are using the "fake" flag to make this look consistent
with further changes (EDAT2, real-space designation support) and don't let
the shadow functions handle fc=1 stes.

In the future, with huge pages in the host, gmap_shadow_pgt() could simply
try to map a huge host page if "fake" is set to one and indicate via return
value that no lower fake tables / shadow ptes are required.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

In preparation for EDAT1/EDAT2 support for gmap shadows, we have to store
the requested edat level in the gmap shadow.

The edat level used during shadow translation is a property of the gmap
shadow. Depending on that level, the gmap shadow will look differently for
the same guest tables. We have to store it internally in order to support
it later.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If a guest ste is read-only, it doesn't make sense to force the ptes in as
writable in the host. If the source page is read-only in the host, it won't
have to be made writable. Please note that if the source page is not
available, it will still be faulted in writable. This can be changed
internally later on.

If ste protection is removed, underlying shadow tables are also removed,
therefore this change does not affect the guest.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Let's take the ipte_lock while working on guest 2 provided page table, just
like the other gaccess functions.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As gmap shadows contains correct protection permissions, protection
exceptons can directly be forwarded to guest 3. If we would encounter
a protection exception while faulting, the next guest 3 run will
automatically handle that for us.

Keep the dat_protection logic in place, as it will be helpful later.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Instead of doing it in the caller, let's just take the mmap_sem
in kvm_s390_shadow_fault(). By taking it as read, we allow parallel
faulting on shadow page tables, gmap shadow code is prepared for that.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Before any thread is allowed to use a gmap_shadow, it has to be fully
initialized. However, for invalidation to work properly, we have to
register the new gmap_shadow before we protect the parent gmap table.

Because locking is tricky, and we have to avoid duplicate gmaps, let's
introduce an initialized field, that signalizes other threads if that
gmap_shadow can already be used or if they have to retry.

Let's properly return errors using ERR_PTR() instead of simply returning
NULL, so a caller can properly react on the error.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We have to unlock sg->guest_table_lock in order to call
gmap_protect_rmap(). If we sleep just before that call, another VCPU
might pick up that shadowed page table (while it is not protected yet)
and use it.

In order to avoid these races, we have to introduce a third state -
"origin set but still invalid" for an entry. This way, we can avoid
another thread already using the entry before the table is fully protected.
As soon as everything is set up, we can clear the invalid bit - if we
had no race with the unshadowing code.
Suggested-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We really want to avoid manually handling protection for nested
virtualization. By shadowing pages with the protection the guest asked us
for, the SIE can handle most protection-related actions for us (e.g.
special handling for MVPG) and we can directly forward protection
exceptions to the guest.

PTEs will now always be shadowed with the correct _PAGE_PROTECT flag.
Unshadowing will take care of any guest changes to the parent PTE and
any host changes to the host PTE. If the host PTE doesn't have the
fitting access rights or is not available, we have to fix it up.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

For now, the tlb of shadow gmap is only flushed when the parent is removed,
not when it is removed upfront. Therefore other shadow gmaps can reuse the
tables without the tlb getting flushed.

Fix this by simply flushing the tlb
1. Before the shadow tables are removed (analogouos to other unshadow functions)
2. When the gmap is freed and therefore the top level pages are freed.
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch introduces function kvm_s390_shadow_fault() used to resolve a
fault on a shadow gmap. This function will do validity checking and
build up the shadow page table hierarchy in order to fault in the
requested page into the shadow page table structure.

If an exception occurs while shadowing, guest 2 has to be notified about
it using either an exception or a program interrupt intercept. If
concurrent unshadowing occurres, this function will simply return with
-EAGAIN and the caller has to retry.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

For a nested KVM guest the outer KVM host needs to create shadow
page tables for the nested guest. This patch adds the basic support
to the guest address space (gmap) code.

For each guest address space the inner KVM host creates, the first
outer KVM host needs to create shadow page tables. The address space
is identified by the ASCE loaded into the control register 1 at the
time the inner SIE instruction for the second nested KVM guest is
executed. The outer KVM host creates the shadow tables starting with
the table identified by the ASCE on a on-demand basis. The outer KVM
host will get repeated faults for all the shadow tables needed to
run the second KVM guest.

While a shadow page table for the second KVM guest is active the access
to the origin region, segment and page tables needs to be restricted
for the first KVM guest. For region and segment and page tables the first
KVM guest may read the memory, but write attempt has to lead to an
unshadow.  This is done using the page invalid and read-only bits in the
page table of the first KVM guest. If the first guest re-accesses one of
the origin pages of a shadow, it gets a fault and the affected parts of
the shadow page table hierarchy needs to be removed again.

PGSTE tables don't have to be shadowed, as all interpretation assist can't
deal with the invalid bits in the shadow pte being set differently than
the original ones provided by the first KVM guest.

Many bug fixes and improvements by David Hildenbrand.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Let's use a reference counter mechanism to control the lifetime of
gmap structures. This will be needed for further changes related to
gmap shadows.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The current gmap pte notifier forces a pte into to a read-write state.
If the pte is invalidated the gmap notifier is called to inform KVM
that the mapping will go away.

Extend this approach to allow read-write, read-only and no-access
as possible target states and call the pte notifier for any change
to the pte.

This mechanism is used to temporarily set specific access rights for
a pte without doing the heavy work of a true mprotect call.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The gmap notifier list and the gmap list in the mm_struct change rarely.
Use RCU to optimize the reader of these lists.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Pass an address range to the page table invalidation notifier
for KVM. This allows to notify changes that affect a larger
virtual memory area, e.g. for 1MB pages.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Hook the VMX preemption timer to the "hv timer" functionality added
by the previous patch.  This includes: checking if the feature is
supported, if the feature is broken on the CPU, the hooks to
setup/clean the VMX preemption timer, arming the timer on vmentry
and handling the vmexit.

A module parameter states if the VMX preemption timer should be
utilized.
Signed-off-by: NYunhong Jiang <yunhong.jiang@intel.com>
[Move hv_deadline_tsc to struct vcpu_vmx, use -1 as the "unset" value.
 Put all VMX bits here.  Enable it by default #yolo. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>