- 24 3月, 2014 1 次提交
-
-
由 Daniel Vetter 提交于
With the recent addition of locking checks in commit 62ff94a5 Author: Daniel Vetter <daniel.vetter@ffwll.ch> AuthorDate: Thu Jan 23 22:18:47 2014 +0100 drm/crtc-helper: remove LOCKING from kerneldoc drm_add_edid_modes started to WARN about the mode_config.mutex not being held in the lvds and dp initialization code. Now since this is init code locking is fairly redudant if it wouldn't be for the drm core registering sysfs files a bit early. And the locking WARNINGs nicely enforce that indeed all access to the mode lists are properly protected. And a full audit shows that only i915 and gma500 touch the modes lists at init time. Hence I've opted to wrap up this entire mode detection sequence for fixed panels with the mode_config mutex for both lvds and edp outputs. Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 22 3月, 2014 3 次提交
-
-
由 Dave Airlie 提交于
Since Daniel documented things with a sledge hammer, we got lots of nice backtraces in suspend/resume operations, I've check the callers of this and they all seems safe to me, This fixes one set of warns I reported. Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
The locking in drm_fb_helper_initial_config is a bit troublesome for a few reasons: - We can't just wrap the entire function up into modeset locks since the fbdev registration might call down into fbcon code, which then through our ->set_par implementation needs to be able to grab all modeset locks. So we'd have a neat deadlock. - This implies though that all current callers don't hold any modeset locks by necessity, so we have free reign to grab any modeset locks we need to grab. - The private state of the fbdev helper doesn't need any protection through locks, since once we have the fbdev registered it is mostly invariant or protected through the modeset locking in ->set_par and other callbacks. We can fully rely on driver having non-racy setup sequences here. For the initial config computation we actually may not grab locks since drivers which provide their own magic sauce (like i915) might need to grab locks themselves. - We should grab locks though when we probe outputs. Currently there's not much risk, but already now userspace could start poking at sysfs files and so probe concurrently. I expect that in the future driver init will be much more async, and since probing is really time-consuming this is a prime candidate. - We must not hold any crtc->mutex locks while calling probe functions since those might need to lock a crtc for e.g. load detection. i915 is such a driver. Also it's the probing calls which hit upon piles of new locking asserts I've recently added in commit 62ff94a5 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 22:18:47 2014 +0100 drm/crtc-helper: remove LOCKING from kerneldoc and commit 63951385 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 15:14:15 2014 +0100 drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c Hence the right fix is to grab the mode_config mutex, but only that and only right around the probe calls. It seems to be sufficient to shut up all the locking WARNINGs I see on i915 and nouveau in drm_fb_helper_initial_config. Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Tested-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
We have two calling contexts for thise function: - In the crtc helper code itself as part of the ->set_config implementation. In this calling context all modeset locks are already held, as they should. - In drivers not implementing fastboot before the fbdev/fbcon setup and initialization. This has been added for all drivers in commit 76a39dbf Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Jan 20 23:12:54 2013 +0100 drm/fb-helper: don't disable everything in initial_config In this calling context we do not hold any modeset locks since the immediately following call to initialize the fbev emulation grabs all these locks themselves. - There are two exceptions to the above rule: shmob doesn't have fbdev emulation support. I've manually checked the callchain up to the driver load function and no kms locks are held. The right fix therefore is to split this helper into an internal and external version and add the required locking to the function exported to drivers. This remedies locking inconsistencies exposed by me adding locking WARNs as part of the recent kerneldoc abi polishing done in commit 62ff94a5 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 22:18:47 2014 +0100 drm/crtc-helper: remove LOCKING from kerneldoc and commit 63951385 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 15:14:15 2014 +0100 drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c v2: It helps when I actually git add the entire thing. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Tested-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 21 3月, 2014 1 次提交
-
-
git://github.com/patjak/drm-gma500由 Dave Airlie 提交于
Summary of what's included: - SGX MMU support - SGX IRQ handling (Page faults and blitter fences) - Minor Cedarview and Poulsbo unification - Work queue for ASLE interrupt work - Various cleanups, style fixes and removal of dead code * 'gma500-next' of git://github.com/patjak/drm-gma500: drm/gma500: remove stub .open/postclose drm/gma500: Code cleanup - inline documentation drm/gma500: Code cleanup - style fixes drm/gma500: Code cleanup - removal of centralized exiting of function drm/gma500/cdv: Cedarview display cleanups drm/gma500: Unify encoder mode fixup drm/gma500: Unify _get_core_freq for cdv and psb drm/gma500: Move asle interrupt work into a work task drm/gma500: Remove dead code drm/gma500: Add backing type and base align to psb_gem_create() drm/gma500: Remove unused ioctls drm/gma500: Always trap MMU page faults drm/gma500: Hook up the MMU drm/gma500: Add first piece of blitter code drm/gma500: Give MMU code it's own header file drm/gma500: Add support for SGX interrupts drm/gma500: Make SGX MMU driver actually do something
-
- 20 3月, 2014 1 次提交
-
-
由 Dave Airlie 提交于
Not sure why git didn't flag this, but the result of automerge from 3.14-rc7 screwed up the radeon init procedure. Reported-by: Fireburn on #radeon Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 18 3月, 2014 24 次提交
-
-
git://git.freedesktop.org/git/drm-intel由 Dave Airlie 提交于
Merge straggling core drm patches. * 'topic/core-stuff' of git://git.freedesktop.org/git/drm-intel: drm: Fix use-after-free in the shadow-attache exit code drm/fb-helper: Do the 'max_conn_count' zero check drm: Check if the allocation has succeeded before dereferencing newmode drm/fb-helper: Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par() drm/edid: request HDMI underscan by default
-
由 Joonyoung Shim 提交于
The sg_table made when gem cma is created isn't used anywhere. The sgt of struct drm_gem_cma_object will have only sg_tabel imported. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~dvdhrm/linux由 Dave Airlie 提交于
This is the 3rd respin of the drm-anon patches. They allow module unloading, use the pin_fs_* helpers recommended by Al and are rebased on top of drm-next. Note that there are minor conflicts with the "drm-minor" branch. * 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux: drm: init TTM dev_mapping in ttm_bo_device_init() drm: use anon-inode instead of relying on cdevs drm: add pseudo filesystem for shared inodes
-
由 Dave Airlie 提交于
Linux 3.14-rc7 Backmerge to help out Intel guys.
-
ssh://people.freedesktop.org/~danvet/drm由 Dave Airlie 提交于
Here's my drm documentation update and driver api polish pull request. Alex reviewed the entire pile, I've applied a little bit of spelling polish in a few places since then and otherwise the Usual Suspects (David, Rob, ...) don't seem up to have another look at it (I've poked them on irc). So I think it's as good as it gets ;-) Note that I've dropped the final imx breaker patch since that's blocked on imx getting sane. Once that's landed I'll ping you to pick up that straggler. * 'drm-docs' of ssh://people.freedesktop.org/~danvet/drm: (34 commits) drm/imx: remove drm_mode_connector_detach_encoder harder drm: kerneldoc polish for drm_crtc.c drm: kerneldoc polish for drm_crtc_helper.c drm: drop error code for drm_helper_resume_force_mode drm/crtc-helper: remove LOCKING from kerneldoc drm: remove return value from drm_helper_mode_fill_fb_struct drm/doc: Fix misplaced </para> drm: remove drm_display_mode->private_size drm: polish function kerneldoc for drm_modes.[hc] drm/modes: drop maxPitch from drm_mode_validate_size drm/modes: drop return value from drm_display_mode_from_videomode drm/modes: remove drm_mode_height/width drm: extract drm_modes.h for drm_crtc.h functions drm: move drm_mode related functions into drm_modes.c drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c drm/doc: Integrate drm_modes.c kerneldoc drm/kms: rip out drm_mode_connector_detach_encoder drm/doc: Add function reference documentation for drm_mm.c drm/doc: Overview documentation for drm_mm.c drm/mm: Remove MM_UNUSED_TARGET ...
-
git://git.freedesktop.org/git/drm-intel由 Dave Airlie 提交于
- fine-grained display power domains for byt (Imre) - runtime pm prep patches for !hsw from Paulo - WiZ hashing flag updates from Ville - ppgtt setup cleanup and enabling of full 4G range on bdw (Ben) - fixes from Jesse for the inherited intial config code - gpu reset code improvements from Mika - per-pipe num_planes refactoring from Damien - stability fixes around bdw forcewake handling and other bdw w/a from Mika Ken - and as usual a pile of smaller fixes all over * 'drm-intel-next' of git://git.freedesktop.org/git/drm-intel: (107 commits) drm/i915: Go OCD on the Makefile drm/i915: Implement command buffer parsing logic drm/i915: Refactor shmem pread setup drm/i915: Avoid div by zero when pixel clock is large drm/i915: power domains: add vlv power wells drm/i915: factor out intel_set_cpu_fifo_underrun_reporting_nolock drm/i915: vlv: factor out valleyview_display_irq_install drm/i915: sanity check power well sw state against hw state drm/i915: factor out reset_vblank_counter drm/i915: sanitize PUNIT register macro definitions drm/i915: vlv: keep first level vblank IRQs masked drm/i915: check pipe power domain when reading its hw state drm/i915: check port power domain when reading the encoder hw state drm/i915: get port power domain in connector detect handlers drm/i915: add port power domains drm/i915: add noop power well handlers instead of NULL checking them drm/i915: split power well 'set' handler to separate enable/disable/sync_hw drm/i915: add init power domain to always-on power wells drm/i915: move power domain macros to intel_pm.c drm/i915: Disable full ppgtt by default ...
-
由 Daniel Vetter 提交于
Conflicts: drivers/gpu/drm/i915/Makefile Makefile cleanup in drm-intel-next conflicts with a build-fix to move intel_opregion under CONFIG_ACPI. Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 David Herrmann 提交于
These are unused and can safely be dropped. DRM core verifies they're non-NULL before it calls them. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Arthur Borsboom 提交于
Improve readability by adding/changing inline documentation Signed-off-by: NArthur Borsboom <arthurborsboom@gmail.com> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Arthur Borsboom 提交于
Code cleanup by following i915 constant/variable names and ordering Code cleanup by following directions from kernel doc: Codingstyle Code cleanup by following directions from kernel doc: DRM Signed-off-by: NArthur Borsboom <arthurborsboom@gmail.com> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Arthur Borsboom 提交于
Removed centralized exiting of function (goto statement), since it was the only used in one single location with only a return statement. Signed-off-by: NArthur Borsboom <arthurborsboom@gmail.com> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
Previously the backlight code was called from IRQ context which isn't allowed. This patch moves all the asle work into a work task which takes care of the locking bug reported by users. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64221Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Thierry Reding 提交于
The gma500 driver sets DRIVER_GEM unconditionally, so testing for the absence of the feature will always fail. Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
We'll need this for our gem create ioctl in a later patch. Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
All of these ioctls are unused and most of them just duplicate what drm already provides. Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
Properly init the MMU and add MMU entries when adding GTT entries Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
Right now, all we need to know about the blitter is that it's not doing anything that can be messed up when fiddling with MMU mappings. Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
Add 2D blit status and MMU fault interrupts to the IRQ handler. Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Patrik Jakobsson 提交于
Old MMU code never wrote PDs or PTEs to any registers. Now we do, and that's a good start. Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
- 17 3月, 2014 10 次提交
-
-
由 Daniel Vetter 提交于
This regression has been introduced in commit b3f2333d Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Dec 11 11:34:31 2013 +0100 drm: restrict the device list for shadow attached drivers Reported-by: NDave Jones <davej@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
-
由 Xiubo Li 提交于
Since we cannot make sure the 'max_conn_count' will always be none zero from the users, and then if max_conn_count equals to zero, the kcalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the 'max_conn_count' zero check in the front of drm_fb_helper_init(). Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> CC: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Damien Lespiau 提交于
We allocate memory in drm_display_mode_from_vic_index() and use it without checking the pointer is valid. Fix that. Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Ville Syrjälä 提交于
Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par() to make sure extra planes get disabled whenever fbcon takes over. Otherwise the code in drm_fb_helper_set_par() was already doing the exact same thing as drm_fb_helper_restore_fbdev_mode(), so this doesn't change the behaviour in any other way. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
git://people.freedesktop.org/~dvdhrm/linux由 Dave Airlie 提交于
This series contains several cleanups for the DRM-minor handling. All but the last one reviewed by Daniel and tested by Thierry. Initially, the series included patches to convert minor-handling to a common base-ID, but have been NACKed by Daniel so I dropped them and only included the main part in the last patch. With this in place, drm_global_mutex is no longer needed for minor-handling (but still for device unregistration..). There are some pending patches that try to remove the global mutex entirely, but they need some more reviews and thus are not included. * 'drm-minor' of git://people.freedesktop.org/~dvdhrm/linux: drm: make minors independent of global lock drm: inline drm_minor_get_id() drm: coding-style fixes in minor handling drm: remove redundant minor->device field drm: remove unneeded #ifdef CONFIG_DEBUGFS drm: rename drm_unplug/get_minor() to drm_minor_register/unregister() drm: move drm_put_minor() to drm_minor_free() drm: allocate minors early drm: add minor-lookup/release helpers drm: provide device-refcount drm: turn DRM_MINOR_* into enum drm: remove unused DRM_MINOR_UNASSIGNED drm: skip redundant minor-lookup in open path drm: group dev-lifetime related members
-
由 Linus Torvalds 提交于
-
git://people.freedesktop.org/~dvdhrm/linux由 Dave Airlie 提交于
This branch includes 6 minor fixes mainly for udl. Everything non-trivial was reviewed by Daniel and the patches have been on the list for quite some time. * 'drm-fixes' of git://people.freedesktop.org/~dvdhrm/linux: drm/gem: dont init "ret" in drm_gem_mmap() drm/crtc: add sanity checks to create_dumb() drm/gem: free vma-node during object-cleanup drm/gem: fix indentation drm/udl: fix Bpp calculation in dumb_create() drm/udl: fix error-path when damage-req fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Three small fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/clock: Prevent tracing recursion in sched_clock_cpu() stop_machine: Fix^2 race between stop_two_cpus() and stop_cpus() sched/deadline: Deny unprivileged users to set/change SCHED_DEADLINE policy
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Misc smaller fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix leak in uncore_type_init failure paths perf machine: Use map as success in ip__resolve_ams perf symbols: Fix crash in elf_section_by_name perf trace: Decode architecture-specific signal numbers
-
由 Michael Kerrisk 提交于
While testing and documenting the msgrcv() MSG_COPY flag that Stanislav Kinsbursky added in commit 4a674f34 ("ipc: introduce message queue copy feature" => kernel 3.8), I discovered a couple of bugs in the implementation. The two bugs concern MSG_COPY interactions with other msgrcv() flags, namely: (A) MSG_COPY + MSG_EXCEPT (B) MSG_COPY + !IPC_NOWAIT The bugs are distinct (and the fix for the first one is obvious), however my fix for both is a single-line patch, which is why I'm combining them in a single mail, rather than writing two mails+patches. ===== (A) MSG_COPY + MSG_EXCEPT ===== With the addition of the MSG_COPY flag, there are now two msgrcv() flags--MSG_COPY and MSG_EXCEPT--that modify the meaning of the 'msgtyp' argument in unrelated ways. Specifying both in the same call is a logical error that is currently permitted, with the effect that MSG_COPY has priority and MSG_EXCEPT is ignored. The call should give an error if both flags are specified. The patch below implements that behavior. ===== (B) (B) MSG_COPY + !IPC_NOWAIT ===== The test code that was submitted in commit 3a665531 ("selftests: IPC message queue copy feature test") shows MSG_COPY being used in conjunction with IPC_NOWAIT. In other words, if there is no message at the position 'msgtyp'. return immediately with the error in ENOMSG. What was not (fully) tested is the behavior if MSG_COPY is specified *without* IPC_NOWAIT, and there is an odd behavior. If the queue contains less than 'msgtyp' messages, then the call blocks until the next message is written to the queue. At that point, the msgrcv() call returns a copy of the newly added message, regardless of whether that message is at the ordinal position 'msgtyp'. This is clearly bogus, and problematic for applications that might want to make use of the MSG_COPY flag. I considered the following possible solutions to this problem: (1) Force the call to block until a message *does* appear at the position 'msgtyp'. (2) If the MSG_COPY flag is specified, the kernel should implicitly add IPC_NOWAIT, so that the call fails with ENOMSG for this case. (3) If the MSG_COPY flag is specified, but IPC_NOWAIT is not, generate an error (probably, EINVAL is the right one). I do not know if any application would really want to have the functionality of solution (1), especially since an application can determine in advance the number of messages in the queue using msgctl() IPC_STAT. Obviously, this solution would be the most work to implement. Solution (2) would have the effect of silently fixing any applications that tried to employ broken behavior. However, it would mean that if we later decided to implement solution (1), then user-space could not easily detect what the kernel supports (but, since I'm somewhat doubtful that solution (1) is needed, I'm not sure that this is much of a problem). Solution (3) would have the effect of informing broken applications that they are doing something broken. The downside is that this would cause a ABI breakage for any applications that are currently employing the broken behavior. However: a) Those applications are almost certainly not getting the results they expect. b) Possibly, those applications don't even exist, because MSG_COPY is currently hidden behind CONFIG_CHECKPOINT_RESTORE. The upside of solution (3) is that if we later decided to implement solution (1), user-space could determine what the kernel supports, via the error return. In my view, solution (3) is mildly preferable to solution (2), and solution (1) could still be done later if anyone really cares. The patch below implements solution (3). PS. For anyone out there still listening, it's the usual story: documenting an API (and the thinking about, and the testing of the API, that documentation entails) is the one of the single best ways of finding bugs in the API, as I've learned from a lot of experience. Best to do that documentation before releasing the API. Signed-off-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: stable@vger.kernel.org Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-