Entering SMM while running in guest mode wasn't working very well because several
pieces of the vcpu state were left set up for nested operation.

Some of the issues observed:

* L1 was getting unexpected VM exits (using L1 interception controls but running
  in SMM execution environment)
* MMU was confused (walk_mmu was still set to nested_mmu)
* INTERCEPT_SMI was not emulated for L1 (KVM never injected SVM_EXIT_SMI)

Intel SDM actually prescribes the logical processor to "leave VMX operation" upon
entering SMM in 34.14.1 Default Treatment of SMI Delivery. AMD doesn't seem to
document this but they provide fields in the SMM state-save area to stash the
current state of SVM. What we need to do is basically get out of guest mode for
the duration of SMM. All this completely transparent to L1, i.e. L1 is not given
control and no L1 observable state changes.

To avoid code duplication this commit takes advantage of the existing nested
vmexit and run functionality, perhaps at the cost of efficiency. To get out of
guest mode, nested_svm_vmexit is called, unchanged. Re-entering is performed using
enter_svm_guest_mode.

This commit fixes running Windows Server 2016 with Hyper-V enabled in a VM with
OVMF firmware (OVMF_CODE-need-smm.fd).
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Analogous to 858e25c0 ("kvm: nVMX: Refactor nested_vmx_run()"), this commit splits
nested_svm_vmrun into two parts. The newly introduced enter_svm_guest_mode modifies the
vcpu state to transition from L1 to L2, while the code left in nested_svm_vmrun handles
the VMRUN instruction.
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Entering SMM while running in guest mode wasn't working very well because several
pieces of the vcpu state were left set up for nested operation.

Some of the issues observed:

* L1 was getting unexpected VM exits (using L1 interception controls but running
  in SMM execution environment)
* SMM handler couldn't write to vmx_set_cr4 because of incorrect validity checks
  predicated on nested.vmxon
* MMU was confused (walk_mmu was still set to nested_mmu)

Intel SDM actually prescribes the logical processor to "leave VMX operation" upon
entering SMM in 34.14.1 Default Treatment of SMI Delivery. What we need to do is
basically get out of guest mode and set nested.vmxon to false for the duration of
SMM. All this completely transparent to L1, i.e. L1 is not given control and no
L1 observable state changes.

To avoid code duplication this commit takes advantage of the existing nested
vmexit and run functionality, perhaps at the cost of efficiency. To get out of
guest mode, nested_vmx_vmexit with exit_reason == -1 is called, a trick already
used in vmx_leave_nested. Re-entering is cleaner, using enter_vmx_non_root_mode.

This commit fixes running Windows Server 2016 with Hyper-V enabled in a VM with
OVMF firmware (OVMF_CODE-need-smm.fd).
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Intel SDM 27.5.2 Loading Host Segment and Descriptor-Table Registers:

"The GDTR and IDTR limits are each set to FFFFH."
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Similar to NMI, there may be ISA specific reasons why an SMI cannot be
injected into the guest. This commit adds a new smi_allowed callback to
be implemented in following commits.
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Entering and exiting SMM may require ISA specific handling under certain
circumstances. This commit adds two new callbacks with empty implementations.
Actual functionality will be added in following commits.

* pre_enter_smm() is to be called when injecting an SMM, before any
  SMM related vcpu state has been changed
* pre_leave_smm() is to be called when emulating the RSM instruction,
  when the vcpu is in real mode and before any SMM related vcpu state
  has been restored
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It has always annoyed me a bit how SVM_EXIT_NPF is handled by
pf_interception.  This is also the only reason behind the
under-documented need_unprotect argument to kvm_handle_page_fault.
Let NPF go straight to kvm_mmu_page_fault, just like VMX
does in handle_ept_violation and handle_ept_misconfig.
Reviewed-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Checking the mode is unnecessary, and is done without a memory barrier
separating the LAPIC write from the vcpu->mode read; in addition,
kvm_vcpu_wake_up is already doing a check for waiters on the wait queue
that has the same effect.

In practice it's safe because spin_lock has full-barrier semantics on x86,
but don't be too clever.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Remove redundant null checks before calling kmem_cache_destroy.

Found with make coccicheck M=arch/x86/kvm on linux-next tag
next-20170929.
Signed-off-by: NTim Hansen <devtimhansen@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

SDM mentioned:

 "If either the “unrestricted guest†VM-execution control or the “mode-based
  execute control for EPT†VM- execution control is 1, the “enable EPTâ€
  VM-execution control must also be 1."

However, we can still observe unrestricted_guest is Y after inserting the kvm-intel.ko
w/ ept=N. It depends on later starts a guest in order that the function
vmx_compute_secondary_exec_control() can be executed, then both the module parameter
and exec control fields will be amended.

This patch fixes it by amending module parameter immediately during vmcs data setup.
Reviewed-by: NJim Mattson <jmattson@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- XCR0 is reset to 1 by RESET but not INIT
- XSS is zeroed by both RESET and INIT
- BNDCFGU, BND0-BND3, BNDCFGS, BNDSTATUS are zeroed by both RESET and INIT

This patch does this according to SDM.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Our routines look at tscdeadline and period when deciding state of a
timer.  The timer is disarmed when switching between TSC deadline and
other modes, so we should set everything to disarmed state.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

preemption timer only looks at tscdeadline and could inject already
disarmed timer.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

0 should disable the timer, but start_hv_timer will recognize it as an
expired timer instead.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The kvm slabs can consume a significant amount of system memory
and indeed in our production environment we have observed that
a lot of machines are spending significant amount of memory that
can not be left as system memory overhead. Also the allocations
from these slabs can be triggered directly by user space applications
which has access to kvm and thus a buggy application can leak
such memory. So, these caches should be accounted to kmemcg.
Signed-off-by: NShakeel Butt <shakeelb@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Let's just name these according to the SDM. This should make it clearer
that the are used to enable exiting and not the feature itself.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Changing it afterwards doesn't make too much sense and will only result
in inconsistencies.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Setting it to 0 leads to setting it to the default value, let's document
this.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

No need for another enable_ept check. kvm->arch.ept_identity_map_addr
only has to be inititalized once. Having alloc_identity_pagetable() is
overkill and dropping BUG_ONs is always nice.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

They are inititally 0, so no need to reset them to 0.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

vcpu->cpu is not cleared when doing a vmx_vcpu_put/load, so this can be
dropped.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Without this, we won't be able to do any flushes, so let's just require
it. Should be absent in very strange configurations.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

ept_* function should only be called with enable_ept being set.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

This function is only called with enable_ept.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

vmx and svm use zalloc, so this is not necessary.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Make it a void and drop error handling code.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

And also get rid of that superfluous local variable "kvm".
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Let's just drop the return.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

The description in the Intel SDM of how the divide configuration
register is used: "The APIC timer frequency will be the processor's bus
clock or core crystal clock frequency divided by the value specified in
the divide configuration register."

Observation of baremetal shown that when the TDCR is change, the TMCCT
does not change or make a big jump in value, but the rate at which it
count down change.

The patch update the emulation to APIC timer to so that a change to the
divide configuration would be reflected in the value of the counter and
when the next interrupt is triggered.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
[Fixed some whitespace and added a check for negative delta and running
 timer. - Radim]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

If we take TSC-deadline mode timer out of the picture, the Intel SDM
does not say that the timer is disable when the timer mode is change,
either from one-shot to periodic or vice versa.

After this patch, the timer is no longer disarmed on change of mode, so
the counter (TMCCT) keeps counting down.

So what does a write to LVTT changes ? On baremetal, the change of mode
is probably taken into account only when the counter reach 0. When this
happen, LVTT is use to figure out if the counter should restard counting
down from TMICT (so periodic mode) or stop counting (if one-shot mode).

This patch is based on observation of the behavior of the APIC timer on
baremetal as well as check that they does not go against the description
written in the Intel SDM.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
[Fixed rate limiting of periodic timer.]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Extract the logic of limit lapic periodic timer frequency to a new function,
this function will be used by later patches.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

SDM 10.5.4.1 TSC-Deadline Mode mentioned that "Transitioning between TSC-Deadline
mode and other timer modes also disarms the timer". So the APIC Timer Initial Count
Register for one-shot/periodic mode should be reset. This patch do it.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
[Removed unnecessary definition of APIC_LVT_TIMER_MASK.]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Make kvm_stat support Python 3 by changing the use of "print" to a
function rather than a statement, switching from "iteritems" and
"iterkeys" (removed in Python 3) to "items" and "keys" respectively,
and decoding bytes to strings when dealing with text.

With this change, kvm_stat is usable with Python 2.6 and greater.
Signed-off-by: NJeremy Cline <jeremy@jcline.org>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

KVM doesn't expose the PLE capability to the L1 hypervisor, however,
ple_window still shows the default value on L1 hypervisor. This patch
fixes it by clearing all the PLE related module parameter if there is
no PLE capability.
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Paul is handling almost all of the powerpc related KVM patches nowadays,
so he should be mentioned in the MAINTAINERS file accordingly.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When KVM emulates an exit from L2 to L1, it loads L1 CR4 into the
guest CR4. Before this CR4 loading, the guest CR4 refers to L2
CR4. Because these two CR4's are in different levels of guest, we
should vmx_set_cr4() rather than kvm_set_cr4() here. The latter, which
is used to handle guest writes to its CR4, checks the guest change to
CR4 and may fail if the change is invalid.

The failure may cause trouble. Consider we start
  a L1 guest with non-zero L1 PCID in use,
     (i.e. L1 CR4.PCIDE == 1 && L1 CR3.PCID != 0)
and
  a L2 guest with L2 PCID disabled,
     (i.e. L2 CR4.PCIDE == 0)
and following events may happen:

1. If kvm_set_cr4() is used in load_vmcs12_host_state() to load L1 CR4
   into guest CR4 (in VMCS01) for L2 to L1 exit, it will fail because
   of PCID check. As a result, the guest CR4 recorded in L0 KVM (i.e.
   vcpu->arch.cr4) is left to the value of L2 CR4.

2. Later, if L1 attempts to change its CR4, e.g., clearing VMXE bit,
   kvm_set_cr4() in L0 KVM will think L1 also wants to enable PCID,
   because the wrong L2 CR4 is used by L0 KVM as L1 CR4. As L1
   CR3.PCID != 0, L0 KVM will inject GP to L1 guest.

Fixes: 4704d0be ("KVM: nVMX: Exiting from L2 to L1")
Cc: qemu-stable@nongnu.org
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

is_last_gpte() is not equivalent to the pseudo-code given in commit
6bb69c9b ("KVM: MMU: simplify last_pte_bitmap") because an incorrect
value of last_nonleaf_level may override the result even if level == 1.

It is critical for is_last_gpte() to return true on level == 1 to
terminate page walks. Otherwise memory corruption may occur as level
is used as an index to various data structures throughout the page
walking code.  Even though the actual bug would be wherever the MMU is
initialized (as in the previous patch), be defensive and ensure here
that is_last_gpte() returns the correct value.

This patch is also enough to fix CVE-2017-12188.

Fixes: 6bb69c9b
Cc: stable@vger.kernel.org
Cc: Andy Honig <ahonig@google.com>
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
[Panic if walk_addr_generic gets an incorrect level; this is a serious
 bug and it's not worth a WARN_ON where the recovery path might hide
 further exploitable issues; suggested by Andrew Honig. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The function updates context->root_level but didn't call
update_last_nonleaf_level so the previous and potentially wrong value
was used for page walks.  For example, a zero value of last_nonleaf_level
would allow a potential out-of-bounds access in arch/x86/mmu/paging_tmpl.h's
walk_addr_generic function (CVE-2017-12188).

Fixes: 155a97a3Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>