- 11 1月, 2017 1 次提交
-
-
由 Daniel Vetter 提交于
Pull in latest drm-next from Dave Airlie to get at all the drm-misc goodies, specifically: - dma_fence error state handling rework (Chris needs that for error recovery) - crc support locking changes (Tomeu's i915 crc patches need that). Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
- 10 1月, 2017 15 次提交
-
-
由 Chris Wilson 提交于
Expose an interface for changing the tiling and stride on an object, that includes the complexity of checking for conflicting bindings and fence registers. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170110121045.27144-2-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Make it clear that these functions are the user entry points for the tiling/fence registers. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170110121045.27144-1-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The VMA is later clipped against the vm_area_struct before insertion of the faulting PTE so we are free to create the partial view as we desire. If we use the object as the extents rather than the area, this partial can then be used for other areas. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170110095633.6612-2-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
In order to reuse the partial view for selftesting, extract the common function for computing the view. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170110095633.6612-1-chris@chris-wilson.co.uk
-
由 Michel Thierry 提交于
Commit cc3f90f0 ("drm/i915/glk: Reuse broxton code for geminilake") missed a few of occurences of IS_BROXTON() that should have been coverted to IS_GEN9_LP(). v2: Cite the right commit. (Ander) Fixes: cc3f90f0 ("drm/i915/glk: Reuse broxton code for geminilake") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by: NMichel Thierry <michel.thierry@intel.com> Signed-off-by: NTomasz Lis <tomasz.lis@intel.com> Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> (v1) Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483973495-15138-1-git-send-email-ander.conselvan.de.oliveira@intel.com
-
由 Rodrigo Vivi 提交于
Besides having the DMC firmware in place and loaded let's handle runtime suspend and dc9 as we do for Broxton. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481902946-18593-2-git-send-email-ander.conselvan.de.oliveira@intel.com
-
由 Anusha Srivatsa 提交于
This patch loads the DMC on GLK. There is a single firmware image for all steppings on a GLK. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481902946-18593-1-git-send-email-ander.conselvan.de.oliveira@intel.com
-
由 Chris Wilson 提交于
Rename i915_gem_get_ggtt_size() and i915_gem_get_ggtt_alignment() to i915_gem_fence_size() and i915_gem_fence_alignment() respectively to better match usage. Similarly move the pair of functions into i915_gem_tiling.c next to the fence restrictions. Suggested-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-6-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Chris Wilson 提交于
Restricting the fence to the end of the previous tile-row breaks access to the final portion of the object. On gen2/3 we employed lazy fencing to pad out the fence with scratch page to provide access to the tail, and now we also pad out the object on gen4+ we can apply the same fix. Fixes: af1a7301 ("drm/i915: Only fence tiled region of object.") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-5-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The fence size/alignment is a combination of the vma size plus object tiling parameters. Those parameters are rarely changed, making the fence size/alignemnt roughly constant for the lifetime of the VMA. We can simplify subsequent calculations by precalculating the size/alignment required for GGTT vma taking fencing into account (with an update if we do change the tiling or stride). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-4-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
All of these conditions are prechecked by i915_tiling_ok() before we allow setting the tiling/stride on the object and so we should never fail asserting those conditions before writing the register. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-3-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Ensure the view occupies the full tile row so that reads/writes into the VMA do not escape (via fenced detiling) into neighbouring objects - we will pad the object with scratch pages to satisfy the fence. This applies the lazy-tiling we employed on gen2/3 to gen4+. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-2-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Computing the tile row size of a tiled object (for use with fence registers) is repeated, so extract it to a common helper. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
git://anongit.freedesktop.org/git/drm-misc由 Dave Airlie 提交于
Back to regular -misc pulls with reasonable sizes: - dma_fence error clarification (Chris) - drm_crtc_from_index helper (Shawn), pile more patches on the m-l to roll this out to drivers - mmu-less support for fbdev helpers from Benjamin - piles of kerneldoc work - some polish for crc support from Tomeu and Benjamin - odd misc stuff all over * tag 'drm-misc-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-misc: (48 commits) dma-fence: Introduce drm_fence_set_error() helper dma-fence: Wrap querying the fence->status dma-fence: Clear fence->status during dma_fence_init() drm: fix compilations issues introduced by "drm: allow to use mmuless SoC" drm: Change the return type of the unload hook to void drm: add more document for drm_crtc_from_index() drm: remove useless parameters from drm_pick_cmdline_mode function drm: crc: Call wake_up_interruptible() each time there is a new CRC entry drm: allow to use mmuless SoC drm: compile drm_vm.c only when needed fbmem: add a default get_fb_unmapped_area function drm: crc: Wait for a frame before returning from open() drm: Move locking into drm_debugfs_crtc_crc_add drm/imx: imx-tve: Remove unused variable Revert "drm: nouveau: fix build when LEDS_CLASS=m" drm: Add kernel-doc for drm_crtc_commit_get/put drm/atomic: Fix outdated comment. drm: reference count event->completion gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap drm: Document deprecated load/unload hook ...
-
git://anongit.freedesktop.org/git/drm-intel由 Dave Airlie 提交于
More 4.11 stuff, holidays edition (i.e. not much): - docs and cleanups for shared dpll code (Ander) - some kerneldoc work (Chris) - fbc by default on gen9+ too, yeah! (Paulo) - fixes, polish and other small things all over gem code (Chris) - and a few small things on top Plus a backmerge, because Dave was enjoying time off too. * tag 'drm-intel-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-intel: (275 commits) drm/i915: Update DRIVER_DATE to 20170109 drm/i915: Drain freed objects for mmap space exhaustion drm/i915: Purge loose pages if we run out of DMA remap space drm/i915: Fix phys pwrite for struct_mutex-less operation drm/i915: Simplify testing for am-I-the-kernel-context? drm/i915: Use range_overflows() drm/i915: Use fixed-sized types for stolen drm/i915: Use phys_addr_t for the address of stolen memory drm/i915: Consolidate checks for memcpy-from-wc support drm/i915: Only skip requests once a context is banned drm/i915: Move a few more utility macros to i915_utils.h drm/i915: Clear ret before unbinding in i915_gem_evict_something() drm/i915/guc: Exclude the upper end of the Global GTT for the GuC drm/i915: Move a few utility macros into a separate header drm/i915/execlists: Reorder execlists register enabling drm/i915: Assert that we do create the deferred context drm/i915: Assert all timeline requests are gone before fini drm/i915: Revoke fenced GTT mmapings across GPU reset drm/i915: enable FBC on gen9+ too drm/i915: actually drive the BDW reserved IDs ...
-
- 09 1月, 2017 16 次提交
-
-
由 Chris Wilson 提交于
The dma_fence.error field (formerly known as dma_fence.status) is an optional field that may be set by drivers before calling dma_fence_signal(). The field can be used to indicate that the fence was completed in err rather than with success, and is visible to other consumers of the fence and to userspace via sync_file. This patch renames the field from status to error so that its meaning is hopefully more clear (and distinct from dma_fence_get_status() which is a composite between the error state and signal state) and adds a helper that validates the preconditions of when it is suitable to adjust the error field. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NSumit Semwal <sumit.semwal@linaro.org> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-3-chris@chris-wilson.co.uk
-
由 Matthew Auld 提交于
Now that it's obvious what the helpers do, we can simplify the code somewhat by using them when clearing the pdpe/pml4e with the relevant scratch entry. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NMatthew Auld <matthew.auld@intel.com> Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161213160512.7008-1-matthew.auld@intel.com
-
由 Matthew Auld 提交于
The function name gen8_setup_page_directory_pointer is misleading, and only serves to confuse the reader, it's not setting up a pdp, but rather encoding a specific pml4e with a given pdp. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NMatthew Auld <matthew.auld@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Matthew Auld 提交于
The function name gen8_setup_page_directory is misleading, and only serves to confuse the reader, it's not setting up a pd, but rather encoding a specific pdpe with a given pd. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NMatthew Auld <matthew.auld@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Chris Wilson 提交于
The fence->status is an optional field that is only valid once the fence has been signaled. (Driver may fill the fence->status with an error code prior to calling dma_fence_signal().) Given the restriction upon its validity, wrap querying of the fence->status into a helper dma_fence_get_status(). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NSumit Semwal <sumit.semwal@linaro.org> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-2-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
As the fence->status is an optional field that may be set before dma_fence_signal() is called to convey that the fence completed with an error, we have to ensure that it is always set to zero on initialisation so that the typical use (i.e. unset) always flags a successful completion. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NSumit Semwal <sumit.semwal@linaro.org> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-1-chris@chris-wilson.co.uk
-
由 Benjamin Gaignard 提交于
Removing MMU configuration flag from DRM make few automatic build failed when they answer yes to all flags. Add asm/vga.h file on Blackfin architecture to not broke compilation. Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org> Fixes: 62a0d98a ("drm: allow to use mmuless SoC") Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483789151-6603-1-git-send-email-benjamin.gaignard@linaro.org
-
由 Gabriel Krisman Bertazi 提交于
The integer returned by the unload hook is ignored by the drm core, so let's make it void. This patch was created using the following Coccinelle semantic script (except for the declaration and comment in drm_drv.h): Compile-tested only. // <smpl> @ get_name @ struct drm_driver drv; identifier fn; @@ drv.unload = fn; @ replace_type @ identifier get_name.fn; @@ - int + void fn (...) { ... } @ remove_return_param @ identifier get_name.fn; @@ void fn (...) { <... if (...) return - ... ; ...> } @ drop_final_return @ identifier get_name.fn; @@ void fn (...) { ... - return 0; } // </smpl> Suggested-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by: Christian König <christian.koenig@amd.com>. Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170106175731.29196-1-krisman@collabora.co.uk
-
由 Shawn Guo 提交于
Add a bit more document for function drm_crtc_from_index() to cross link it with drm_crtc_from_index(), and explain that the function is useful in vblank code. While at it, add cross link comment for drm_plane_from_index() as well. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483779131-19935-1-git-send-email-shawnguo@kernel.org
-
由 Vincent Abriou 提交于
drm_pick_cmdline_mode width and height parameters are useless. Just remove them. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: NVincent Abriou <vincent.abriou@st.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483721084-20278-2-git-send-email-vincent.abriou@st.com
-
由 Daniel Vetter 提交于
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
git://anongit.freedesktop.org/git/drm-misc由 Dave Airlie 提交于
First -misc pull for 4.11: - drm_mm rework + lots of selftests (Chris Wilson) - new connector_list locking+iterators - plenty of kerneldoc updates - format handling rework from Ville - atomic helper changes from Maarten for better plane corner-case handling in drivers, plus the i915 legacy cursor patch that needs this - bridge cleanup from Laurent - plus plenty of small stuff all over - also contains a merge of the 4.10 docs tree so that we could apply the dma-buf kerneldoc patches It's a lot more than usual, but due to the merge window blackout it also covers about 4 weeks, so all in line again on a per-week basis. The more annoying part with no pull request for 4 weeks is managing cross-tree work. The -intel pull request I'll follow up with does conflict quite a bit with -misc here. Longer-term (if drm-misc keeps growing) a drm-next-queued to accept pull request for the next merge window during this time might be useful. I'd also like to backmerge -rc2+this into drm-intel next week, we have quite a pile of patches waiting for the stuff in here. * tag 'drm-misc-next-2016-12-30' of git://anongit.freedesktop.org/git/drm-misc: (126 commits) drm: Add kerneldoc markup for new @scan parameters in drm_mm drm/mm: Document locking rules drm: Use drm_mm_insert_node_in_range_generic() for everyone drm: Apply range restriction after color adjustment when allocation drm: Wrap drm_mm_node.hole_follows drm: Apply tight eviction scanning to color_adjust drm: Simplify drm_mm scan-list manipulation drm: Optimise power-of-two alignments in drm_mm_scan_add_block() drm: Compute tight evictions for drm_mm_scan drm: Fix application of color vs range restriction when scanning drm_mm drm: Unconditionally do the range check in drm_mm_scan_add_block() drm: Rename prev_node to hole in drm_mm_scan_add_block() drm: Fix O= out-of-tree builds for selftests drm: Extract struct drm_mm_scan from struct drm_mm drm: Add asserts to catch overflow in drm_mm_init() and drm_mm_init_scan() drm: Simplify drm_mm_clean() drm: Detect overflow in drm_mm_reserve_node() drm: Fix kerneldoc for drm_mm_scan_remove_block() drm: Promote drm_mm alignment to u64 drm: kselftest for drm_mm and restricted color eviction ...
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an artifact of the holiday break I think. Lots of gadget and the usual XHCI fixups for reported issues (one day that driver will calm down...) Also included are a bunch of usb-serial driver fixes, and for good measure, a number of much-reported MUSB driver issues have finally been resolved. All of these have been in linux-next with no reported issues" * tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits) USB: fix problems with duplicate endpoint addresses usb: ohci-at91: use descriptor-based gpio APIs correctly usb: storage: unusual_uas: Add JMicron JMS56x to unusual device usb: hub: Move hub_port_disable() to fix warning if PM is disabled usb: musb: blackfin: add bfin_fifo_offset in bfin_ops usb: musb: fix compilation warning on unused function usb: musb: Fix trying to free already-free IRQ 4 usb: musb: dsps: implement clear_ep_rxintr() callback usb: musb: core: add clear_ep_rxintr() to musb_platform_ops USB: serial: ti_usb_3410_5052: fix NULL-deref at open USB: serial: spcp8x5: fix NULL-deref at open USB: serial: quatech2: fix sleep-while-atomic in close USB: serial: pl2303: fix NULL-deref at open USB: serial: oti6858: fix NULL-deref at open USB: serial: omninet: fix NULL-derefs at open and disconnect USB: serial: mos7840: fix misleading interrupt-URB comment USB: serial: mos7840: remove unused write URB USB: serial: mos7840: fix NULL-deref at open USB: serial: mos7720: remove obsolete port initialisation USB: serial: mos7720: fix parallel probe ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc fixes from Greg KH: "Here are a few small char/misc driver fixes for 4.10-rc3. Two MEI driver fixes, and three NVMEM patches for reported issues, and a new Hyper-V driver MAINTAINER update. Nothing major at all, all have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: hyper-v: Add myself as additional MAINTAINER nvmem: fix nvmem_cell_read() return type doc nvmem: imx-ocotp: Fix wrong register size nvmem: qfprom: Allow single byte accesses for read/write mei: move write cb to completion on credentials failures mei: bus: fix mei_cldev_enable KDoc
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging/IIO fixes from Greg KH: "Here are some staging and IIO driver fixes for 4.10-rc3. Most of these are minor IIO fixes of reported issues, along with one network driver fix to resolve an issue. And a MAINTAINERS update with a new mailing list. All of these, except the MAINTAINERS file update, have been in linux-next with no reported issues (the MAINTAINERS patch happened on Friday...)" * tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: MAINTAINERS: add greybus subsystem mailing list staging: octeon: Call SET_NETDEV_DEV() iio: accel: st_accel: fix LIS3LV02 reading and scaling iio: common: st_sensors: fix channel data parsing iio: max44000: correct value in illuminance_integration_time_available iio: adc: TI_AM335X_ADC should depend on HAS_DMA iio: bmi160: Fix time needed to sleep after command execution iio: 104-quad-8: Fix active level mismatch for the preset enable option iio: 104-quad-8: Fix off-by-one errors when addressing IOR iio: 104-quad-8: Fix index control configuration
-
- 08 1月, 2017 4 次提交
-
-
由 Johannes Weiner 提交于
Several people report seeing warnings about inconsistent radix tree nodes followed by crashes in the workingset code, which all looked like use-after-free access from the shadow node shrinker. Dave Jones managed to reproduce the issue with a debug patch applied, which confirmed that the radix tree shrinking indeed frees shadow nodes while they are still linked to the shadow LRU: WARNING: CPU: 2 PID: 53 at lib/radix-tree.c:643 delete_node+0x1e4/0x200 CPU: 2 PID: 53 Comm: kswapd0 Not tainted 4.10.0-rc2-think+ #3 Call Trace: delete_node+0x1e4/0x200 __radix_tree_delete_node+0xd/0x10 shadow_lru_isolate+0xe6/0x220 __list_lru_walk_one.isra.4+0x9b/0x190 list_lru_walk_one+0x23/0x30 scan_shadow_nodes+0x2e/0x40 shrink_slab.part.44+0x23d/0x5d0 shrink_node+0x22c/0x330 kswapd+0x392/0x8f0 This is the WARN_ON_ONCE(!list_empty(&node->private_list)) placed in the inlined radix_tree_shrink(). The problem is with 14b46879 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking"), which passes an update callback into the radix tree to link and unlink shadow leaf nodes when tree entries change, but forgot to pass the callback when reclaiming a shadow node. While the reclaimed shadow node itself is unlinked by the shrinker, its deletion from the tree can cause the left-most leaf node in the tree to be shrunk. If that happens to be a shadow node as well, we don't unlink it from the LRU as we should. Consider this tree, where the s are shadow entries: root->rnode | [0 n] | | [s ] [sssss] Now the shadow node shrinker reclaims the rightmost leaf node through the shadow node LRU: root->rnode | [0 ] | [s ] Because the parent of the deleted node is the first level below the root and has only one child in the left-most slot, the intermediate level is shrunk and the node containing the single shadow is put in its place: root->rnode | [s ] The shrinker again sees a single left-most slot in a first level node and thus decides to store the shadow in root->rnode directly and free the node - which is a leaf node on the shadow node LRU. root->rnode | s Without the update callback, the freed node remains on the shadow LRU, where it causes later shrinker runs to crash. Pass the node updater callback into __radix_tree_delete_node() in case the deletion causes the left-most branch in the tree to collapse too. Also add warnings when linked nodes are freed right away, rather than wait for the use-after-free when the list is scanned much later. Fixes: 14b46879 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking") Reported-by: NDave Chinner <david@fromorbit.com> Reported-by: NHugh Dickins <hughd@google.com> Reported-by: NAndrea Arcangeli <aarcange@redhat.com> Reported-and-tested-by: NDave Jones <davej@codemonkey.org.uk> Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Chris Leech <cleech@redhat.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
4.10-rc loadtest (even on x86, and even without THPCache) fails with "fork: Cannot allocate memory" or some such; and /proc/meminfo shows PageTables growing. Commit 953c66c2 ("mm: THP page cache support for ppc64") that got merged in rc1 removed the freeing of an unused preallocated pagetable after do_fault_around() has called map_pages(). This is usually a good optimization, so that the followup doesn't have to reallocate one; but it's not sufficient to shift the freeing into alloc_set_pte(), since there are failure cases (most commonly VM_FAULT_RETRY) which never reach finish_fault(). Check and free it at the outer level in do_fault(), then we don't need to worry in alloc_set_pte(), and can restore that to how it was (I cannot find any reason to pte_free() under lock as it was doing). And fix a separate pagetable leak, or crash, introduced by the same change, that could only show up on some ppc64: why does do_set_pmd()'s failure case attempt to withdraw a pagetable when it never deposited one, at the same time overwriting (so leaking) the vmf->prealloc_pte? Residue of an earlier implementation, perhaps? Delete it. Fixes: 953c66c2 ("mm: THP page cache support for ppc64") Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kbuild fix from Michal Marek: "The asm-prototypes.h file added in the last merge window results in invalid code with CONFIG_KMEMCHECK=y. The net result is that genksyms segfaults. This pull request fixes the header, the genksyms fix is in my kbuild branch for 4.11" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: asm-prototypes: Clear any CPP defines before declaring the functions
-
由 Greg Kroah-Hartman 提交于
The Greybus driver subsystem has a mailing list, so list it in the MAINTAINERS file so that people know to send patches there as well. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NJohan Hovold <johan@kernel.org> Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 1月, 2017 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Nothing particular stands out, only a few small fixes for USB-audio, HD-audio and Firewire. The USB-audio fix is the respin of the previous race fix after a revert due to the regression" * tag 'sound-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: Revert "ALSA: firewire-lib: change structure member with proper type" ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion ALSA: usb-audio: Fix irq/process data synchronization ALSA: hda - Apply asus-mode8 fixup to ASUS X71SL ALSA: hda - Fix up GPIO for ASUS ROG Ranger ALSA: firewire-lib: change structure member with proper type ALSA: firewire-tascam: Fix to handle error from initialization of stream data ALSA: fireworks: fix asymmetric API call at unit removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk fixes from Stephen Boyd: "One fix for a broken driver on Renesas RZ/A1 SoCs with bootloaders that don't turn all the clks on and another fix for stm32f4 SoCs where we have multiple drivers attaching to the same DT node" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: stm32f4: Use CLK_OF_DECLARE_DRIVER initialization method clk: renesas: mstp: Support 8-bit registers for r7s72100
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix temp1_max_alarm attribute in lm90 driver" * tag 'hwmon-for-linus-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (lm90) fix temp1_max_alarm attribute
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "MIPS: - fix host kernel crashes when receiving a signal with 64-bit userspace - flush instruction cache on all vcpus after generating entry code (both for stable) x86: - fix NULL dereference in MMU caused by SMM transitions (for stable) - correct guest instruction pointer after emulating some VMX errors - minor cleanup" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: remove duplicated declaration KVM: MIPS: Flush KVM entry code from icache globally KVM: MIPS: Don't clobber CP0_Status.UX KVM: x86: reset MMU on KVM_SET_VCPU_EVENTS KVM: nVMX: fix instruction skipping during emulated vm-entry
-