We have a few places where we skip doing csums if we mounted with one of
the rescue options that ignores bad csum roots.  In the future when
there are multiple csum roots it'll be costly to check and see if there
are any missing csum roots, so simply add a flag to indicate the fs
should skip loading csums in case of errors.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In the future we may have multiple csum roots, so simply check the
objectid is for a csum root instead of checking against ->csum_root.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When we start having multiple extent roots we'll need to use a helper to
get to the correct extent_root.  Rename fs_info->extent_root to
_extent_root and convert all of the users of the extent root to using
the btrfs_extent_root() helper.  This will allow us to easily clean up
the remaining direct accesses in the future.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In the future we're going to have multiple csum and extent root trees,
so init the roots block_rsv at setup_root time based on their root key
objectid.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We only need the root to start a transaction, and since it's a global
root we can pick anything, change to the tree_root as we'll have a lot
of extent roots in the future.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We are going to have many extent_roots soon, and we don't need a root
here necessarily as we're not modifying anything, we're just getting the
trans handle so we can have an accurate view of references, so use the
tree_root here.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We're just using the extent_root to set the chunk owner to
root_key->objectid, which is BTRFS_EXTENT_TREE_OBJECTID, so use that
directly instead of using the root.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We only defrag leaves on roots that have SHAREABLE set, so we don't need
to check if we're the extent root as it doesn't have SHAREABLE set.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This is a leftover from when we used to independently swap the extent
root's commit root and the fs tree commit roots.  At the time I simply
changed the helper to a list_add.  There's actually no reason to not add
the extent root to the switch commit root at this point, we don't care
about the order we do the switching since it's all done under the
commit_root_sem.

If we re-mark the extent root dirty after adding it to the
switch_commits list we'll see that BTRFS_ROOT_DIRTY isn't set and then
list_move it back onto the dirty list, and then we'll redo the tree
update and everything will be ok.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We're only using this to start the transaction with to possibly allocate
a chunk.  It doesn't really matter which root to use, but with extent
tree v2 we'll need a bytenr to look up a extent root which makes the
usage of the extent_root awkward here.  Simply change it to the
chunk_root.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

With extent tree v2 we'll have a different extent root based on where
the bytenr is located, so adjust the remove_extent_backref() helper and
it's helpers to pass the extent_root around.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

With extent tree v2 we will have a separate root to hold the block group
items.  Add a btrfs_block_group_root() that will return the appropriate
root given the flags of the fs, and convert all functions that need to
modify block group items to use the helper.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If we're looking for leafs that point to a data extent we want to record
the extent items that point at our bytenr.  At this point we have the
reference and we know for a fact that this leaf should have a reference
to our bytenr.  However if there's some sort of corruption we may not
find any references to our leaf, and thus could end up with eie == NULL.
Replace this BUG_ON() with an ASSERT() and then return -EUCLEAN for the
mortals.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We search for an extent entry with .offset = -1, which shouldn't be a
thing, but corruption happens.  Add an ASSERT() for the developers,
return -EUCLEAN for mortals.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We define __TRANS_DUMMY always, so this extra ifdef stuff is not needed.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This comment was much closer to the related code when it was originally
added, but has slowly migrated north far from its ancestral lands.  Move
it back down with its people.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We pass in the path, but use btrfs_next_item() using the root we
searched with.  Pass the root down to add_keyed_refs() instead of the
fs_info so we can continue to use the same root we searched with.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Nobody is using this anymore, remove it.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The root on the trans->root can be anything, and generally we're
committing from the transaction kthread so it's usually the tree_root.
Change this to just take an fs_info, and to maintain compatibility
simply put the ROOT_TREE_OBJECTID as the root objectid for the
tracepoint.  This will allow use to remove trans->root.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently we do this awful thing where we get another ref on a trans
handle, async off that handle and commit the transaction from that work.
Because we do this we have to mess with current->journal_info and the
freeze counting stuff.

We already have an async thing to kick for the transaction commit, the
transaction kthread.  Replace this work struct with a flag on the
fs_info to tell the kthread to go ahead and commit even if it's before
our timeout.  Then we can drastically simplify the async transaction
commit path.

Note: this can be simplified and functionality based on the pending
operation COMMIT.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
[ add note ]
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This is no longer used, the -o nobarrier is handled by
BTRFS_MOUNT_NOBARRIER.  Remove the flag.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Reshuffle the code inside the first loop of tree_search_offset so that
one if() is eliminated and the becomes more linear.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

[BUG]
When debugging calc_bio_boundaries(), I found that even for RAID1
metadata, we're following stripe length to calculate stripe boundary.

  # mkfs.btrfs -m raid1 -d raid1 /dev/test/scratch[12]
  # mount /dev/test/scratch /mnt/btrfs
  # xfs_io -f -c "pwrite 0 64K" /mnt/btrfs/file
  # umount

Above very basic operations will make calc_bio_boundaries() to report
the following result:

  submit_extent_page: r/i=1/1 file_offset=22036480 len_to_stripe_boundary=49152
  submit_extent_page: r/i=1/1 file_offset=30474240 len_to_stripe_boundary=65536
  ...
  submit_extent_page: r/i=1/1 file_offset=30523392 len_to_stripe_boundary=16384
  submit_extent_page: r/i=1/1 file_offset=30457856 len_to_stripe_boundary=16384
  submit_extent_page: r/i=5/257 file_offset=0 len_to_stripe_boundary=65536
  submit_extent_page: r/i=5/257 file_offset=65536 len_to_stripe_boundary=65536
  submit_extent_page: r/i=1/1 file_offset=30490624 len_to_stripe_boundary=49152
  submit_extent_page: r/i=1/1 file_offset=30507008 len_to_stripe_boundary=32768

Where "r/i" is the rootid and inode, 1/1 means they metadata.
The remaining names match the member used in kernel.

Even all data/metadata are using RAID1, we're still following stripe
length.

[CAUSE]
This behavior is caused by a wrong condition in btrfs_get_io_geometry():

	if (map->type & BTRFS_BLOCK_GROUP_PROFILE_MASK) {
		/* Fill using stripe_len */
		len = min_t(u64, em->len - offset, max_len);
	} else {
		len = em->len - offset;
	}

This means, only for SINGLE we will not follow stripe_len.

However for profiles like RAID1*, DUP, they don't need to bother
stripe_len.

This can lead to unnecessary bio split for RAID1*/DUP profiles, and can
even be a blockage for future zoned RAID support.

[FIX]
Introduce one single-use macro, BTRFS_BLOCK_GROUP_STRIPE_MASK, and
change the condition to only calculate the length using stripe length
for stripe based profiles.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This is a small optimisation since the currently 'entry' is already
checked in the if () {} else if {} construct above the loop. In essence
the first iteration of the final while loop is redundant. To eliminate
this extra check simply get the next entry at the beginning of the loop.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

I noticed a few corner cases when looking at my bytes_index patch for
obvious bugs, so add a bunch of tests to validate proper behavior of the
bytes_index tree.  A couple of basic tests to make sure it puts things
in the correct order, and then more complicated tests to make sure it
re-arranges bitmap entries properly and does the right thing when we try
to make allocations.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently we index free space on offset only, because usually we have a
hint from the allocator that we want to honor for locality reasons.
However if we fail to use this hint we have to go back to a brute force
search through the free space entries to find a large enough extent.

With sufficiently fragmented free space this becomes quite expensive, as
we have to linearly search all of the free space entries to find if we
have a part that's long enough.

To fix this add a cached rb tree to index based on free space entry
bytes.  This will allow us to quickly look up the largest chunk in the
free space tree for this block group, and stop searching once we've
found an entry that is too small to satisfy our allocation.  We simply
choose to use this tree if we're searching from the beginning of the
block group, as we know we do not care about locality at that point.

I wrote an allocator test that creates a 10TiB ram backed null block
device and then fallocates random files until the file system is full.
I think go through and delete all of the odd files.  Then I spawn 8
threads that fallocate 64MiB files (1/2 our extent size cap) until the
file system is full again.  I use bcc's funclatency to measure the
latency of find_free_extent.  The baseline results are

     nsecs               : count     distribution
         0 -> 1          : 0        |                                        |
         2 -> 3          : 0        |                                        |
         4 -> 7          : 0        |                                        |
         8 -> 15         : 0        |                                        |
        16 -> 31         : 0        |                                        |
        32 -> 63         : 0        |                                        |
        64 -> 127        : 0        |                                        |
       128 -> 255        : 0        |                                        |
       256 -> 511        : 10356    |****                                    |
       512 -> 1023       : 58242    |*************************               |
      1024 -> 2047       : 74418    |********************************        |
      2048 -> 4095       : 90393    |****************************************|
      4096 -> 8191       : 79119    |***********************************     |
      8192 -> 16383      : 35614    |***************                         |
     16384 -> 32767      : 13418    |*****                                   |
     32768 -> 65535      : 12811    |*****                                   |
     65536 -> 131071     : 17090    |*******                                 |
    131072 -> 262143     : 26465    |***********                             |
    262144 -> 524287     : 40179    |*****************                       |
    524288 -> 1048575    : 55469    |************************                |
   1048576 -> 2097151    : 48807    |*********************                   |
   2097152 -> 4194303    : 26744    |***********                             |
   4194304 -> 8388607    : 35351    |***************                         |
   8388608 -> 16777215   : 13918    |******                                  |
  16777216 -> 33554431   : 21       |                                        |

avg = 908079 nsecs, total: 580889071441 nsecs, count: 639690

And the patch results are

     nsecs               : count     distribution
         0 -> 1          : 0        |                                        |
         2 -> 3          : 0        |                                        |
         4 -> 7          : 0        |                                        |
         8 -> 15         : 0        |                                        |
        16 -> 31         : 0        |                                        |
        32 -> 63         : 0        |                                        |
        64 -> 127        : 0        |                                        |
       128 -> 255        : 0        |                                        |
       256 -> 511        : 6883     |**                                      |
       512 -> 1023       : 54346    |*********************                   |
      1024 -> 2047       : 79170    |********************************        |
      2048 -> 4095       : 98890    |****************************************|
      4096 -> 8191       : 81911    |*********************************       |
      8192 -> 16383      : 27075    |**********                              |
     16384 -> 32767      : 14668    |*****                                   |
     32768 -> 65535      : 13251    |*****                                   |
     65536 -> 131071     : 15340    |******                                  |
    131072 -> 262143     : 26715    |**********                              |
    262144 -> 524287     : 43274    |*****************                       |
    524288 -> 1048575    : 53870    |*********************                   |
   1048576 -> 2097151    : 55368    |**********************                  |
   2097152 -> 4194303    : 41036    |****************                        |
   4194304 -> 8388607    : 24927    |**********                              |
   8388608 -> 16777215   : 33       |                                        |
  16777216 -> 33554431   : 9        |                                        |

avg = 623599 nsecs, total: 397259314759 nsecs, count: 637042

There's a little variation in the amount of calls done because of timing
of the threads with metadata requirements, but the avg, total, and
count's are relatively consistent between runs (usually within 2-5% of
each other).  As you can see here we have around a 30% decrease in
average latency with a 30% decrease in overall time spent in
find_free_extent.
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

While adding self tests for my space index change I was hitting a
problem where the space indexed tree wasn't returning the expected
->max_extent_size.  This is because we will skip searching any entry
that doesn't have ->bytes >= the amount of bytes we want.  However we'll
still set the max_extent_size based on that entry.  The problem is if we
don't search the bitmap we won't have ->max_extent_size set properly, so
we can't really trust it.

This doesn't really result in a problem per-se, it can just result in us
not finding contiguous area that may exist.  Fix the max_extent_size
helper to return ->bytes if ->max_extent_size isn't set, and add a big
comment explaining why we're doing this.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We use @nr_written to record how many pages have been started by
btrfs_run_delalloc_range().

Currently there are only two cases that would populate @nr_written:

- Inline extent creation
- Compressed write

But both cases will also set @page_started to one.

In fact, in writepage_delalloc() we have the following code, showing
that @nr_written is really only utilized for above two cases:

	/* did the fill delalloc function already unlock and start
	 * the IO?
	 */
	if (page_started) {
		/*
		 * we've unlocked the page, so we can't update
		 * the mapping's writeback index, just update
		 * nr_to_write.
		 */
		wbc->nr_to_write -= nr_written;
		return 1;
	}

But for such cases, writepage_delalloc() will return 1, and exit
__extent_writepage() without going through __extent_writepage_io().

Thus this means, inside __extent_writepage_io(), we always get
@nr_written as 0.

So this patch is going to remove the unnecessary parameter from the
following functions:

- writepage_delalloc()

  As @nr_written passed in is always the initial value 0.

  Although inside that function, we still need a local @nr_written
  to update wbc->nr_to_write.

- __extent_writepage_io()

  As explained above, @nr_written passed in can only be 0.

  This also means we can remove one update_nr_written() call.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We used to need the root for btrfs_reserve_metadata_bytes to check the
orphan cleanup state, but we no longer need that, we simply need the
fs_info.  Change btrfs_reserve_metadata_bytes() to use the fs_info, and
change both btrfs_block_rsv_refill() and btrfs_block_rsv_add() to do the
same as they simply call btrfs_reserve_metadata_bytes() and then
manipulate the block_rsv that is being used.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that we don't care about the stage of the orphan_cleanup_state,
simply replace it with a bit on ->state to make sure we don't call the
orphan cleanup every time we wander into this root.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This is very old code before we were stealing from the global reserve
during evict.  We have proper ways to steal from the global reserve
while we're evicting, so rip out this code as it's no longer necessary.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

I forgot to convert this over when I introduced the global reserve
stealing code to the space flushing code.  Evict was simply trying to
make its reservation and then if it failed it would steal from the
global rsv, which is racey because it's outside of the normal ticketing
code.

Fix this by setting ticket->steal if we are BTRFS_RESERVE_FLUSH_EVICT,
and then make the priority flushing path do the steal for us.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We're going to use this helper in the priority flushing loop, move this
check into the helper to simplify the logic.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since we're dropping locks before we enter the priority flushing loops
we could have had our ticket granted before we got the space_info->lock.
So add this check to avoid doing some extra flushing in the priority
flushing cases.

The case in priority_reclaim_metadata_space is an optimization.  Think
we came in to reserve, we didn't have the space, we added our ticket to
the list.  But at the same time somebody was waiting on the space_info
lock to add space and do btrfs_try_granting_ticket(), so we drop the
lock, get satisfied, come in to do our loop, and we have been
satisfied.

This is the priority reclaim path, so to_reclaim could be !0 still
because we may have only satisfied the priority tickets and still left
non priority tickets on the list.  We would then have to_reclaim but
->bytes == 0.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
[ add note about the optimization ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently the error case for the priority tickets is handled where we
deal with all of the tickets, priority and non-priority.  This is OK in
general, but it makes for some awkward locking.  We take and drop the
space_info->lock back to back because of these different types of
tickets.

Rework the code to handle priority ticket failures in their respective
helpers.  This allows us to be less wonky with our space_info->lock
usage, and means that the main handler simply has to check
ticket->error, as the ticket is guaranteed to be off any list and
completely handled by the time it exits one of the handlers.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When mounting a device, we are reporting the zones twice: once for
checking the zone attributes in btrfs_get_dev_zone_info and once for
loading block groups' zone info in
btrfs_load_block_group_zone_info(). With a lot of block groups, that
leads to a lot of REPORT ZONE commands and slows down the mount
process.

This patch introduces a zone info cache in struct
btrfs_zoned_device_info. The cache is populated while in
btrfs_get_dev_zone_info() and used for
btrfs_load_block_group_zone_info() to reduce the number of REPORT ZONE
commands. The zone cache is then released after loading the block
groups, as it will not be much effective during the run time.

Benchmark: Mount an HDD with 57,007 block groups
Before patch: 171.368 seconds
After patch: 64.064 seconds

While it still takes a minute due to the slowness of loading all the
block groups, the patch reduces the mount time by 1/3.

Link: https://lore.kernel.org/linux-btrfs/CAHQ7scUiLtcTqZOMMY5kbWUBOhGRwKo6J6wYPT5WY+C=cD49nQ@mail.gmail.com/
Fixes: 5b316468 ("btrfs: get zone information of zoned block devices")
CC: stable@vger.kernel.org
Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since commit ba8a9d07 ("Btrfs: delete the entire async bio submission
framework") removed submit workqueues, the parameter fs_devices is not used
anymore.

Remove it, no functional changes.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NSu Yue <l@damenly.su>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In the transaction commit path we are acquiring the tree log mutex too
early and we have a stale comment because:

1) It mentions a function named btrfs_commit_tree_roots(), which does not
   exists anymore, it was the old name of commit_cowonly_roots(), renamed
   a very long time ago by commit 5d4f98a2 ("Btrfs: Mixed back
   reference  (FORWARD ROLLING FORMAT CHANGE)"));

2) It mentions that we need to acquire the tree log mutex at that point
   to ensure we have no running log writers. That is not correct anymore,
   for many years at least, since we are guaranteed that we do not have
   any log writers at that point simply because we have set the state of
   the transaction to TRANS_STATE_COMMIT_DOING and have waited for all
   writers to complete - meaning no one can log until we change the state
   of the transaction to TRANS_STATE_UNBLOCKED. Any attempts to join the
   transaction or start a new one will block until we do that state
   transition;

3) The comment mentions a "trans mutex" which doesn't exists since 2011,
   commit a4abeea4 ("Btrfs: kill trans_mutex") removed it;

4) The current use of the tree log mutex is to ensure proper serialization
   of super block writes - if someone started a new transaction and uses it
   for logging, it will wait for the previous transaction to write its
   super block before writing the super block when attempting to sync the
   log.

So acquire the tree log mutex only when it's absolutely needed, before
setting the transaction state to TRANS_STATE_UNBLOCKED, fix and move the
stale comment, add some assertions and new comments where appropriate.

Also, this has no effect on concurrency or performance, since the new
start of the critical section is still when the transaction is in the
state TRANS_STATE_COMMIT_DOING.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_prepare_sprout() splices seed devices into its own struct fs_devices,
so that its parent function btrfs_init_new_device() can add the new sprout
device to fs_info->fs_devices.

Both btrfs_prepare_sprout() and btrfs_init_new_device() need
device_list_mutex. But they are holding it separately, thus create a
small race window. Close it and hold device_list_mutex across both
functions btrfs_init_new_device() and btrfs_prepare_sprout().

Split btrfs_prepare_sprout() into btrfs_init_sprout() and
btrfs_setup_sprout(). This split is essential because device_list_mutex
must not be held for allocations in btrfs_init_sprout() but must be held
for btrfs_setup_sprout(). So now a common device_list_mutex can be used
between btrfs_init_new_device() and btrfs_setup_sprout().
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Declare int seeding_dev as a bool. Also, move its declaration a line
below to adjust packing.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>