Replace m_flags feature checks with xfs_has_<feature>() calls and
rework the setup code to set flags in m_features.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

This provides separation of mount time feature flags from runtime
mount flags and mount option state. It also makes the feature
checks use the same interface as the superblock features. i.e. we
don't care if the feature is enabled by superblock flags or mount
options, we just care if it's enabled or not.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

Convert the xfs_sb_version_hasfoo() to checks against
mp->m_features. Checks of the superblock itself during disk
operations (e.g. in the read/write verifiers and the to/from disk
formatters) are not converted - they operate purely on the
superblock state. Everything else should use the mount features.

Large parts of this conversion were done with sed with commands like
this:

for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do
	sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f
done

With manual cleanups for things like "xfs_has_extflgbit" and other
little inconsistencies in naming.

The result is ia lot less typing to check features and an XFS binary
size reduced by a bit over 3kB:

$ size -t fs/xfs/built-in.a
	text	   data	    bss	    dec	    hex	filenam
before	1130866  311352     484 1442702  16038e (TOTALS)
after	1127727  311352     484 1439563  15f74b (TOTALS)
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

Currently on-disk feature checks require decoding the superblock
fileds and so can be non-trivial. We have almost 400 hundred
individual feature checks in the XFS code, so this is a significant
amount of code. To reduce runtime check overhead, pre-process all
the version flags into a features field in the xfs_mount at mount
time so we can convert all the feature checks to a simple flag
check.

There is also a need to convert the dynamic feature flags to update
the m_features field. This is required for attr, attr2 and quota
features. New xfs_mount based wrappers are added for this.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

The attr2 feature is somewhat unique in that it has both a superblock
feature bit to enable it and mount options to enable and disable it.

Back when it was first introduced in 2005, attr2 was disabled unless
either the attr2 superblock feature bit was set, or the attr2 mount
option was set. If the superblock feature bit was not set but the
mount option was set, then when the first attr2 format inode fork
was created, it would set the superblock feature bit. This is as it
should be - the superblock feature bit indicated the presence of the
attr2 on disk format.

The noattr2 mount option, however, did not affect the superblock
feature bit. If noattr2 was specified, the on-disk superblock
feature bit was ignored and the code always just created attr1
format inode forks.  If neither of the attr2 or noattr2 mounts
option were specified, then the behaviour was determined by the
superblock feature bit.

This was all pretty sane.

Fast foward 3 years, and we are dealing with fallout from the
botched sb_features2 addition and having to deal with feature
mismatches between the sb_features2 and sb_bad_features2 fields. The
attr2 feature bit was one of these flags. The reconciliation was
done well after mount option parsing and, unfortunately, the feature
reconciliation had a bug where it ignored the noattr2 mount option.

For reasons lost to the mists of time, it was decided that resolving
this issue in commit 7c12f296 ("[XFS] Fix up noattr2 so that it
will properly update the versionnum and features2 fields.") required
noattr2 to clear the superblock attr2 feature bit.  This greatly
complicated the attr2 behaviour and broke rules about feature bits
needing to be set when those specific features are present in the
filesystem.

By complicated, I mean that it introduced problems due to feature
bit interactions with log recovery. All of the superblock feature
bit checks are done prior to log recovery, but if we crash after
removing a feature bit, then on the next mount we see the feature
bit in the unrecovered superblock, only to have it go away after the
log has been replayed.  This means our mount time feature processing
could be all wrong.

Hence you can mount with noattr2, crash shortly afterwards, and
mount again without attr2 or noattr2 and still have attr2 enabled
because the second mount sees attr2 still enabled in the superblock
before recovery runs and removes the feature bit. It's just a mess.

Further, this is all legacy code as the v5 format requires attr2 to
be enabled at all times and it cannot be disabled.  i.e. the noattr2
mount option returns an error when used on v5 format filesystems.

To straighten this all out, this patch reverts the attr2/noattr2
mount option behaviour back to the original behaviour. There is no
reason for disabling attr2 these days, so we will only do this when
the noattr2 mount option is set. This will not remove the superblock
feature bit. The superblock bit will provide the default behaviour
and only track whether attr2 is present on disk or not. The attr2
mount option will enable the creation of attr2 format inode forks,
and if the superblock feature bit is not set it will be added when
the first attr2 inode fork is created.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

xfs_has_attr() is poorly named. It has global scope as it is defined
in a header file, but it has no namespace scope that tells us what
it is checking has attributes. It's not even clear what "has_attr"
means, because what it is actually doing is an attribute fork lookup
to see if the attribute exists.

Upcoming patches use this "xfs_has_<foo>" namespace for global
filesystem features, which conflicts with this function.

Rename xfs_has_attr() to xfs_attr_lookup() and make it a static
function, freeing up the "xfs_has_" namespace for global scope
usage.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

The verifier checks explicitly for bp->b_bn == XFS_SB_DADDR to match
the primary superblock buffer, but the primary superblock is an
uncached buffer and so bp->b_bn is always -1ULL. Hence this never
matches and the CRC error reporting is wholly dependent on the
mount superblock already being populated so CRC feature checks pass
and allow CRC errors to be reported.

Fix this so that the primary superblock CRC error reporting is not
dependent on already having read the superblock into memory.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

Because there are a lot of tracepoints that express numeric data with
an associated unit and tag, document what they are to help everyone else
keep these thigns straight.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

When using pretty-printed scrub tracepoints, decode the meaning of the
scrub flags as strings for easier reading.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Always print inode generation in hexadecimal and preceded with the unit
"gen".
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

For the remaining xfs_buf tracepoints, convert all the tags to
xfs_daddr_t units and retag them 'daddrcount' to match everything else.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Emit whichfork values as text strings in the ftrace output.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Whenever we record i_disk_size (i.e. the ondisk file size), use the
"disize" tag and hexadecimal format consistently.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Some of our tracepoints have a field known as "count".  That name
doesn't describe any units, which makes the fields not very useful.
Rename the fields to capture units and ensure the format is hexadecimal
when we're referring to blocks, extents, or IO operations.

"fsbcount" are in units of fs blocks
"bytecount" are in units of bytes
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Some of our tracepoints have a field known as "len".  That name doesn't
describe any units, which makes the fields not very useful.  Rename the
fields to capture units and ensure the format is hexadecimal.

"fsbcount" are in units of fs blocks
"bbcount" are in units of 512b blocks
"ireccount" are in units of inodes
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Some of our tracepoints describe fields as "offset".  That name doesn't
describe any units, which makes the fields not very useful.  Rename the
fields to capture units and ensure the format is hexadecimal.

"fileoff" means file offset, in units of fs blocks
"pos" means file offset, in bytes
"forkoff" means inode fork offset, in bytes

The one remaining "offset" value is for iclogs, since that's the byte
offset of the end of where we've written into the current iclog.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Some of our tracepoints describe fields as "blkno", "block", or "bno".
That name doesn't describe any units, which makes the fields not very
useful.  Rename the fields to capture units and ensure the format is
hexadecimal.

"startblock" is the startblock field from the bmap structure, which is a
segmented fsblock on the data device, or an rfsblock on the realtime
device.
"fileoff" is a file offset, in units of filesystem blocks
"daddr" is a raw device offset, in 512b blocks
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Always print disk addr (i.e. 512 byte block) numbers in hexadecimal and
preceded with the unit "daddr".
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Always print rmap owner number in hexadecimal and preceded with the unit
"owner".
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Always print allocation group block numbers in hexadecimal and preceded
with the unit "agbno".
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Always print allocation group numbers in hexadecimal and preceded with
the unit "agno".
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Always print inode numbers in hexadecimal and preceded with the unit
"ino" or "agino", as apropriate.  Fix one tracepoint that used "ino %u"
for an inode btree block count to reduce confusion.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

XFS_DADDR_TO_FSB converts a raw disk address (in units of 512b blocks)
to a raw disk address (in units of fs blocks).  Unfortunately, the
xchk_block_error_class tracepoints incorrectly uses this to decode
xfs_daddr_t into segmented AG number and AG block addresses.  Use the
correct translation code.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

With quotaoff not allowing disabling of accounting there is no need
for untagged lookups in this code, so remove the dead leftovers.
Repoted-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
[djwong: convert to for_each_perag_tag]
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

Constify the rest of the btree functions that take structure and union
pointers and are not supposed to modify them.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

This btree function is called when updating a record in the rightmost
block of a btree so that we can update the AGF's longest free extent
length field.  Neither parameter is supposed to be updated, so mark them
both const.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The @start pointer passed to each per-AG btree type's ->alloc_block
function isn't supposed to be modified, since it's a hint about the
location of the btree block being split that is to be fed to the
allocator, so mark the parameter const.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The pointer passed to each per-AG btree type's ->set_root function isn't
supposed to be modified (that function sets an external pointer to the
root block) so mark them const.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

xchk_btree calls a user-supplied function to validate each btree record
that it finds.  Those functions are not supposed to change the record
data, so mark the parameter const.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The inorder functions are simple predicates, which means that they don't
modify the parameters.  Mark them all const.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

These functions initialize a key from a record, but they aren't supposed
to modify the record.  Mark it const.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The query_range functions are supposed to call a caller-supplied
function on each record found in the dataset.  These functions don't
own the memory storing the record, so don't let them change the record.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Range query functions are not supposed to modify the query keys that are
being passed in, so mark them all const.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The btree key comparison functions are not allowed to change the keys
that are passed in, so mark them const.  We'll need this for the next
patch, which adds const to the btree range query functions.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Add a tracepoint for fs shutdowns so we can capture that in ftrace
output.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Now that we always grab an active reference to a perag structure when
dealing with perag metadata, we can remove this unnecessary variable.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

There are several GETFSMAP backend functions for XFS to cover the three
devices and various feature support.  Each of these functions are passed
pointers to the low and high keys for the dataset that userspace
requested, and a pointer to scratchpad variables that are used to
control the iteration and fill out records.  The scratchpad data can be
changed arbitrarily, but the keys are supposed to remain unchanged (and
under the control of the outermost loop in xfs_getfsmap).

Unfortunately, the data and rt backends modify the keys that are passed
in from the main control loop, which causes subsequent calls to return
incorrect query results.  Specifically, each of those two functions set
the block number in the high key to the size of their respective device.
Since fsmap results are sorted in device number order, if the lower
numbered device is smaller than the higher numbered device, the first
function will set the high key to the small size, and the key remains
unchanged as it is passed into the function for the higher numbered
device.  The second function will then fail to return all of the results
for the dataset that userspace is asking for because the keyspace is
incorrectly constrained.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com>

The fsmap implementation for realtime devices uses the gap between
info->next_daddr and a free rtextent reported by xfs_rtalloc_query_range
to feed userspace fsmap records with an "unknown" owner.  We use this
trick to report to userspace when the last rtextent in the filesystem is
in use by synthesizing a null rmap record starting at the next block
after the query range.

Unfortunately, there's a minor accounting bug in the way that we
construct the null rmap record.  Originally, ahigh.ar_startext contains
the last rtextent for which the user wants records.  It's entirely
possible that number is beyond the end of the rt volume, so the location
synthesized rmap record /must/ be constrained to the minimum of the high
key and the number of extents in the rt volume.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com>

In commit 8ad560d2, we changed xfs_rtalloc_query_range to constrain
the range of bits in the realtime bitmap file that would actually be
searched.  In commit a3a374bf, we changed the range again
(incorrectly), leading to the fix in commit d88850bd, which finally
corrected the range check code.  Unfortunately, the author never noticed
that the function modifies its input parameters, which is a totaly no-no
since none of the other range query functions change their input
parameters.

So, fix this function yet again to stash the upper end of the query
range (i.e. the high key) in a local variable and hope this is the last
time I have to fix my own function.  While we're at it, mark the key
inputs const so nobody makes this mistake again. :(

Fixes: 8ad560d2 ("xfs: strengthen rtalloc query range checks")
Not-fixed-by: a3a374bf ("xfs: fix off-by-one error in xfs_rtalloc_query_range")
Not-fixed-by: d88850bd ("xfs: fix high key handling in the rt allocator's query_range function")
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com>

->writepage is only used in one place - single page writeback from
memory reclaim. We only allow such writeback from kswapd, not from
direct memory reclaim, and so it is rarely used. When it comes from
kswapd, it is effectively random dirty page shoot-down, which is
horrible for IO patterns. We will already have background writeback
trying to clean all the dirty pages in memory as efficiently as
possible, so having kswapd interrupt our well formed IO stream only
slows things down. So get rid of xfs_vm_writepage() completely.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
[djwong: forward port to 5.15]
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>