Perf tries to find probe function addresses from map when debuginfo
could not be found.

To the first added function, the value of ref_reloc_sym was set in
maps__set_kallsyms_ref_reloc_sym() and can be obtained from
host_machine->kmaps->maps. After that, new maps are added to
host_machine->kmaps->maps in dso__load_kcore(), all these new added maps
do not have a valid ref_reloc_sym.

When adding a second function, get_target_map() may get a map without
valid ref_reloc_sym, and raise the error "Relocated base symbol is not
found".

Fix this by using kernel_get_ref_reloc_sym() to get ref_reloc_sym.

This problem can be reproduced as following:

  $ perf probe --add='sys_write' --add='sys_open'
  Relocated base symbol is not found!
    Error: Failed to add events.

After this patch:

  $ perf probe --add='sys_write' --add='sys_open'
  Added new event:
    probe:sys_write      (on sys_write)

  You can now use it in all perf tools, such as:

      perf record -e probe:sys_write -aR sleep 1

  Added new event:
    probe:sys_open       (on sys_open)

  You can now use it in all perf tools, such as:

      perf record -e probe:sys_open -aR sleep 1
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426816616-2394-1-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

They are all auto-generated files during the perf building.

Before this patch:

 $ git status
 Untracked files:
   (use "git add <file>..." to include in what will be committed)

	config/feature-checks/test-all.make.output
	config/feature-checks/test-backtrace.make.output
	config/feature-checks/test-bionic.make.output
	config/feature-checks/test-dwarf.make.output
	config/feature-checks/test-fortify-source.make.output
	config/feature-checks/test-glibc.make.output
	config/feature-checks/test-gtk2-infobar.make.output
	config/feature-checks/test-gtk2.make.output
	config/feature-checks/test-libaudit.make.output
	config/feature-checks/test-libbabeltrace.make.output
	config/feature-checks/test-libbfd.make.output
	config/feature-checks/test-libdw-dwarf-unwind.make.output
	config/feature-checks/test-libelf-getphdrnum.make.output
	config/feature-checks/test-libelf-mmap.make.output
	config/feature-checks/test-libelf.make.output
	config/feature-checks/test-libnuma.make.output
	config/feature-checks/test-libperl.make.output
	config/feature-checks/test-libpython-version.make.output
	config/feature-checks/test-libpython.make.output
	config/feature-checks/test-libslang.make.output
	config/feature-checks/test-libunwind.make.output
	config/feature-checks/test-pthread-attr-setaffinity-np.make.output
	config/feature-checks/test-stackprotector-all.make.output
	config/feature-checks/test-sync-compare-and-swap.make.output
	config/feature-checks/test-timerfd.make.output
	config/feature-checks/test-zlib.make.output

After this patch:

 $ git status
 nothing to commit, working directory clean
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426821638-11227-3-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since commit 4ae61202 ("perf build: Rename PERF-FEATURES into
FEATURE-DUMP") renames PERF-FEATURES into FEATURE-DUMP, the .gitignore
file should also do this thing for consistency.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426821638-11227-2-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Both 'perf diff' and 'perf mem' have 'field-separator' option, which
causes segfault if passed with empty string. This patch uses previously
introduced 'OPT_STRING_NOEMPTY' option macro to prevent fault.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: pi3orama@163.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1426820272-23302-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
                          const char *name, bool is_kallsyms, bool is_vdso)
{
...
        if (access(filename, F_OK)) {
               ^--------------------------------------------------------- [1]
                if (is_kallsyms) {
                         if (copyfile("/proc/kallsyms", filename))
                                goto out_free;
                } else if (link(realname, filename) && copyfile(name, filename))
                             ^-----------------------------^------------- [2]
                                                            \------------ [3]
                        goto out_free;
        }
...

When multiple instances of perf record get to [1] at more or less same time and
run access() one or more may get failure because the file does not exist yet
(since the first instance did not have chance to link it yet).

At this point the race moves to link() at [2] where first thread to get
there links file and goes on but second one gets -EEXIST so it runs
copyfile [3] which truncates the file.

reproducer:

rm -rf /root/.debug
for cpu in $(awk '/processor/ {print $3}' /proc/cpuinfo); do
	perf record -a -v -T -F 1000 -C $cpu \
		-o perf-${cpu}.data sleep 5 2> /dev/null &
done
wait

and simply search for empty files by:

find /lib/modules/`uname -r`/kernel/* -size 0
Signed-off-by: NMilos Vyletel <milos@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1426847846-11112-1-git-send-email-milos@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Without this patch, perf report cause segfault if pass "" as '-t':

  $ perf report -t ""

   # To display the perf.data header info, please use --header/--header-only options.
   #
   # Samples: 37  of event 'syscalls:sys_enter_write'
   # Event count (approx.): 37
   #
   # Children    SelfCommand   Shared Object         Symbol
   Segmentation fault

Since -t is used to add field-separator for generate table, -t "" is
actually meanless. This patch defines a new OPT_STRING_NOEMPTY() option
generator to ensure user never pass empty string to that option.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1426251114-198991-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit f1f13af9 ("perf callchain: Cache eh/debug frame offset for
dwarf unwind") introduces a cache for .debug_frame and .eh_frame_hdr.
Unfortunately, it makes them share a same cache (dso->frame_offset).
Which causes unwind failure on ARM:

   $ perf test unwind
  Test dwarf unwind: FAILED!

The reason is that, if a dso has '.debug_frame' but doesn't have
'.eh_frame_hdr' (like ARM), dso->frame_offset will be filled by offset
of '.debug_frame' during the first time calling of find_proc_info() ->
read_unwind_spec_debug_frame(), and be regarded to '.eh_frame_hdr' when
the second time calling of find_proc_info() ->
read_unwind_spec_eh_frame(), since '.eh_frame_hdr' is checked prior to
'.debug_frame'.

This patch solves the problem by creating two cache fields for
'.eh_frame_hdr' and '.debug_frame'.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/55028BA0.1030701@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash
completion script are originally taken from git bash completion script,
these functions may be preloaded before perf bash completion script
runs.

In order to avoid repeating loading the same function twice, some test
constraints are used before these function definitions in the perf bash
completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||').

The problem is that, if these functions in perf bash completion script
are changed for some reason, perf will still use the preloaded bash
functions rather than the customized functions of its own.

As a result, the perf bash completion will behave incorrectly. To get
rid of this problem, a flag can be defined to determine the proper
situation.

And to avoid overwriting the preloaded functions, the names of these
functions in perf bash completion script should be renamed to the
perf-customized ones.

Example:

Before this patch:

 $ type _get_comp_words_by_ref
 _get_comp_words_by_ref is a function
 _get_comp_words_by_ref ()
 {
     local exclude flag i OPTIND=1;
     local cur cword words=();
     local upargs=() upvars=() vcur vcword vprev vwords;
     while getopts "c:i:n:p:w:" flag "$@"; do
         case $flag in
             c)
                 vcur=$OPTARG
             ;;
             i)
                 vcword=$OPTARG
             ;;
             n)
                 exclude=$OPTARG
             ;;
             p)
                 vprev=$OPTARG
             ;;
             w)
                 vwords=$OPTARG
             ;;
         esac;
     done;
     while [[ $# -ge $OPTIND ]]; do
         case ${!OPTIND} in
             cur)
                 vcur=cur
             ;;
             prev)
                 vprev=prev
             ;;
             cword)
                 vcword=cword
             ;;
             words)
                 vwords=words
             ;;
             *)
                 echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2;
                 return 1
             ;;
         esac;
         let "OPTIND += 1";
     done;
     __get_cword_at_cursor_by_ref "$exclude" words cword cur;
     [[ -n $vcur ]] && {
         upvars+=("$vcur");
         upargs+=(-v $vcur "$cur")
     };
     [[ -n $vcword ]] && {
         upvars+=("$vcword");
         upargs+=(-v $vcword "$cword")
     };
     [[ -n $vprev && $cword -ge 1 ]] && {
         upvars+=("$vprev");
         upargs+=(-v $vprev "${words[cword - 1]}")
     };
     [[ -n $vwords ]] && {
         upvars+=("$vwords");
         upargs+=(-a${#words[@]} $vwords "${words[@]}")
     };
     (( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}"
 }

As shown above, the _get_comp_words_by_ref is the preloaded function in
fact, rather than the function defined in perf-completion.sh. So if we
happen to change the function for some reason, the result will behave in
a wrong state.

After this patch:

We can set preload_get_comp_words_by_ref="false" to not use the preloaded
function. Instead, it will use the function defined in perf-completion.sh,
which is renamed as __perf_get_comp_words_by_ref to avoid overwriting
the preloaded function _get_comp_words_by_ref.

 $ type __perf_get_comp_words_by_ref
 __perf_get_comp_words_by_ref is a function
 __perf_get_comp_words_by_ref ()
 {
     local exclude cur_ words_ cword_;
     if [ "$1" = "-n" ]; then
         exclude=$2;
         shift 2;
     fi;
     __my_reassemble_comp_words_by_ref "$exclude";
     cur_=${words_[cword_]};
     while [ $# -gt 0 ]; do
         case "$1" in
             cur)
                 cur=$cur_
             ;;
             prev)
                 prev=${words_[$cword_-1]}
             ;;
             words)
                 words=("${words_[@]}")
             ;;
             cword)
                 cword=$cword_
             ;;
         esac;
         shift;
     done
 }

As shown above, the function __perf_get_comp_words_by_ref is loaded and
can work this time.

Note that we do not change the original behavior when those functions are
not preloaded before perf bash completion script runs. In this case,
although the flag is set to "true", the code will still change it to
"false" to use the function defined in perf-completion.sh.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-14-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion does not support listing subsubcommands for 'perf
trace <TAB>', so fix it.

Example:

Before this patch:

 $ perf trace <TAB>
 $

As shown above, the subsubcommands of perf trace does not come out.

After this patch:

 $ perf trace <TAB>
 record

As shown above, the subsubcommands of perf trace can come out now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-13-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion does not support listing subsubcommands for 'perf
timechart <TAB>', so fix it.

Example:

Before this patch:

 $ perf timechart <TAB>
 $

As shown above, the subsubcommands of perf timechart does not come out.

After this patch:

 $ perf timechart <TAB>
 record

As shown above, the subsubcommands of perf timechart can come out now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-12-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion does not support listing subsubcommands for 'perf
test <TAB>', so fix it.

Example:

Before this patch:

 $ perf test <TAB>
 $

As shown above, the subsubcommands of perf test does not come out.

After this patch:

 $ perf test <TAB>
 list

As shown above, the subsubcommands of perf test can come out now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-11-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion does not support listing subsubcommands for 'perf
script <TAB>', so fix it.

Example:

Before this patch:

 $ perf script <TAB>
 $

As shown above, the subsubcommands of perf script does not come out.

After this patch:

 $ perf script <TAB>
 record  report

As shown above, the subsubcommands of perf script can come out now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-10-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion does not support listing subsubcommands for 'perf
help <TAB>', so fix it.

Example:

Before this patch:

 $ perf help <TAB>
 $

As shown above, the subsubcommands of perf help does not come out.

After this patch:

 $ perf help <TAB>
 annotate       buildid-cache  data           evlist         inject
 kvm            lock           probe          report         script
 test           top
 bench          buildid-list   diff           help           kmem
 list           mem            record         sched          stat
 timechart      trace

As shown above, the subsubcommands of perf help can come out now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-9-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion does not support listing subsubcommands for 'perf
data <TAB>', so fix it.

Example:

Before this patch:

 $ perf data <TAB>
 $

As shown above, the subsubcommands of perf data does not come out.

After this patch:

 $ perf data <TAB>
 convert

As shown above, the subsubcommands of perf data can come out now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-8-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion does not support listing subcommands for 'perf
--<long option> <TAB>'.

Example:

Before this patch:

 $ perf --debug <TAB>
 $

As shown above, the subcommands of perf does not come out.

After this patch:

 $ perf --debug <TAB>
 annotate       buildid-cache  data           evlist         inject
 kvm            lock           probe          report         script
 test           top            version
 bench          buildid-list   diff           help           kmem
 list           mem            record         sched          stat
 timechart      trace

As shown above, the subcommands of perf can come out now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-7-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion only supports -e rather than --event, so fix it.

Example:

Before this patch:

 $ perf record --event <TAB>
 $

As shown above, the events of record does not come out.

After this patch:

 $ perf record --event <TAB>
 lignment-faults                   cpu/instructions/
 L1-dcache-prefetch-misses          node-prefetches
 uncore_rbox_0/qpi0_idle_filt/
 branch-instructions                cpu/mem-loads/
 L1-dcache-store-misses             node-prefetch-misses
 uncore_rbox_0/qpi1_date_response/
 branch-load-misses                 cpu-migrations
 L1-dcache-stores                   node-store-misses
 uncore_rbox_0/qpi1_filt_send/
 branch-loads                       dTLB-load-misses
 L1-icache-load-misses              node-stores
 uncore_rbox_0/qpi1_idle_filt/
 ...

As shown above, the events of record can come out now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-6-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion does not support listing events for 'perf kvm|kmem|
mem|lock|sched record|stat|top -e <TAB>', where 'kvm|kmem|mem|lock|sched'
are all subcommands of perf.

Example:

Before this patch:

 $ perf kvm record -e <TAB>
 $

As shown above, the events of record does not come out.

After this patch:

 $ perf kvm record -e <TAB>
 alignment-faults                   cpu/instructions/
 L1-dcache-prefetch-misses          node-prefetches
 uncore_rbox_0/qpi0_idle_filt/
 branch-instructions                cpu/mem-loads/
 L1-dcache-store-misses             node-prefetch-misses
 uncore_rbox_0/qpi1_date_response/
 branch-load-misses                 cpu-migrations
 L1-dcache-stores                   node-store-misses
 uncore_rbox_0/qpi1_filt_send/
 branch-loads                       dTLB-load-misses
 L1-icache-load-misses              node-stores
 uncore_rbox_0/qpi1_idle_filt/
 ...

As shown above, the events of record can come out now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-5-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion gives wrong options for 'perf kvm|kmem|mem|lock|
sched subsubcommand --<TAB>', where 'kvm|kmem|mem|lock|sched' are all
subcommands of perf and 'subsubcommand' is a subcommand of 'kvm|kmem|mem
|lock|sched'. In fact, the result incorrectly lists the bash completion
of 'perf subcommand' rather than 'perf subcommand subsubcommand'.

Example:

Before this patch:

 $ perf kvm record --<TAB>
 --guest          --guestkallsyms  --guestmodules   --guestmount
 --guestvmlinux   --host           --input          --output
 --verbose

As shown above, the result is the options of kvm rather than record.

After this patch:

 $ perf kvm record --<TAB>
 --all-cpus          --cgroup            --delay             --group
 --no-buildid        --output            --quiet             --stat
 --uid
 --branch-any        --count             --event             --intr-regs
 --no-buildid-cache  --period            --raw-samples       --tid
 --verbose
 --branch-filter     --cpu               --filter            --mmap-pages
 --no-inherit        --per-thread        --realtime          --timestamp
 --weight
 --call-graph        --data              --freq
 --no-buffering      --no-samples        --pid
 --running-time      --transaction

As shown above, the result is exactly the options of record as we wished.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-4-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion does not support listing subsubcommands for 'perf
kvm|kmem|mem|lock|sched --<long option> <TAB>', where 'kvm|kmem|mem|
lock|sched' are all subcommands of perf.

Example:

Before this patch:

 $ perf kvm --verbose <TAB>
 $

As shown above, the subsubcommands of perf kvm does not come out.

After this patch:

 $ perf kvm --verbose <TAB>
 buildid-list  diff          record        report        stat
 top

As shown above, the subsubcommands of perf kvm can come out now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-3-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The bash completion does not support listing options for 'perf
kvm|kmem|mem|lock|sched --<TAB>', where 'kvm|kmem|mem|lock|sched' are
all subcommands of perf.

Example:

Before this patch:

 $ perf kvm --<TAB>
 $

As shown above, the options of perf kvm does not come out.

After this patch:

 $ perf kvm --<TAB>
 --alloc    --caller   --input    --line     --raw-ip   --sort
 --verbose

As shown above, the options of perf kvm can come out now.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-2-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit:

  c6e5e9fb ("perf tools: Fix building error in x86_64 when dwarf unwind is on")

removed the definition of IS_X86_64 but not all places using it, with
the consequence that perf-read-vdsox32 would not be built anymore, and
the default lib install directory was 'lib' instead of 'lib64'.

Also needs to go to v3.19.
Signed-off-by: NH.J. Lu <hjl.tools@gmail.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org # 3.19
Link: http://lkml.kernel.org/r/CAMe9rOqpGVq3D88w+D15ef7sv6G6k57ZeTvxBm46=WFgzo9p1w@mail.gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As it has nothing to do with features and won't be moved
into tools/build.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-6qgf37nss4wwjatgj5i4ng0o@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Preparing for feature checks separation, moving related stuff under
'FEATURE*' namespace.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-v9oo22ra70rrk1dy495a7bjc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Preparing for feature checks separation, moving related
stuff under 'feature*' namespace.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-ciaflab01mf0ljmfb9xr4p41@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Preparing for feature checks separation, moving related stuff under
'feature*' namespace.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-t72o4nwx81owjv14y43b2wpf@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It only contains (FEATURE_TESTS - FEATURE_DISPLAY) tests to display the
rest of the checks on 'make VF=1'. But we can actually compute this
list, which is less confusing.

Also renaming LIB_FEATURE_TESTS into FEATURE_DISPLAY, so it reflects
what this variable actually does - display its tests status to user.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-gs160y03hpmx5ezpcr4gunxc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Preparing for feature checks separation, moving related stuff under
'FEATURE*' namespace.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-iobj4f9gygcakrk2v5u61159@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It has no use, so we can directly use the value for CFLAGS.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-ywyr5v962s32daq5hpgfkjap@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The test-all fails to build due to type in pthread-attr-setaffinity-np
include.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-awn2658267slejnebyrlns86@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Following commit introduced features build dump:
  443a7054 perf tools: Output feature detection's gcc output to a file

Moving them into to have code more compact and renaming build dump
files. For each feature 'test-X' new file 'test-X.make.output' is
created and contains the build out.  It's created in the same directory
as the feature itself.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-dk6svnhcephrzgz4mfpcmtm7@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Remove libbabeltrace check from default features set, because the
requested version is not released yet in most distributions. We'll
enable later.

Calling libbabeltrace check manually via feature_check before
$(feature-libbabeltrace) is used.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-5n7mr6ugcwdbxk0n1z8uukaa@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit b11db658 ("perf tools: Fix build
error on ARCH=i386/x86_64/sparc64") uses sed on ARCH, which triggers a
bug in sequence of sed expression, where 's/arm.*/arm/' will replace
'arm64' to 'arm', causes arm64 building failure.

This patch prevent 'arm64' to be mached for 'arm.*' case.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1426598987-75245-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead of annotating just the top level hist_entry, allow instead
annotating a map_symbol, i.e. the top level hist_entry or one of the
callchains for which there were samples.
Suggested-by: NStephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-k1zxj5564je9jei4yd15ouwn@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since hist_entry__delete() nowadays doesn't actually frees anything that
may be in use by the annotation code.

Eventually we will solve this for good by reference counting struct
symbol.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uldtgljymtrkns0knpiso5op@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Those asprintf return checks should be aligned with the other
conditionals, fix it.

Also add {} blocks to further clarify.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
echo Link: http://lkml.kernel.org/n/tip-`ranpwd -l 24`@git.kernel.org
Link: http://lkml.kernel.org/n/tip-nqgs07jfphbkw67wja870d3r@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

No need to repeat some tests, skip annotation instead.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6h6igrb81u4e6rwfmx7dv47n@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - Fix UI bug after zoom into thread/dso/symbol and another, after fold/unfold,
    in the TUI hists browser (He Kuang)

  - Fixes for 'perf probe' to better handle aliased symbols, for instance in glibc (Masami Hiramatsu, Namhyung Kim)

  - 'perf kmem' improvements and fixes: (Namhyung Kim)
    - Fix segfault when invalid sort key is given
    - Allow -v option
    - Fix alignment of slab result table

  - 'perf stat' improvements and fixes: (Andi Kleen)
    - Output running time and run/enabled ratio in CSV mode
    - Fix IPC and other formulas with -A
    - Always correctly indent ratio column

  - Add tracepoint events fields CTF conversion support to 'perf data' (Sebastian Andrzej Siewior)

Infrastructure changes:

  - Output feature detection's gcc output to a file, to help in debugging (Arnaldo Carvalho de Melo)

  - Fix 'perf probe' compiles due to declarations using perf_probe_point (David Ahern)

  - Fix possible double free on error in 'perf probe' (He Kuang)

  - Remove superfluous thread->comm_set setting (Jiri Olsa)

  - Fix libbabeltrace detection (Jiri Olsa)

  - More work on separating ordered_events code out of perf_session (Arnaldo Carvalho de Melo)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Adding support to convert tracepoint event fields into CTF
event fields.

We parse each tracepoint event for CTF conversion and add
tracepoint fields as regular CTF event fields, so they
appear in babeltrace output like:

  $ babeltrace ./ctf-data/
  ...
  [09:02:00.950703057] (+?.?????????) sched:sched_stat_runtime: { }, { perf_ip = ... SNIP ... common_type = 298, common_flags = 1, \
  common_preempt_count = 0, common_pid = 31813, comm = "perf", pid = 31813, runtime = 458800, vruntime = 52059858071 }
  ...
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-6-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Its table was a bit misaligned.  Fix it.

Before:

  # perf kmem stat --caller -l 10
  ------------------------------------------------------------------------------------------------------
   Callsite                           | Total_alloc/Per | Total_req/Per   | Hit      | Ping-pong | Frag
  ------------------------------------------------------------------------------------------------------
   radeon_cs_parser_init.part.1+11a   |      2080/260   |      1504/188   |        8 |        0 | 27.692%
   radeon_cs_parser_init.part.1+e1    |       384/96    |       288/72    |        4 |        0 | 25.000%
   radeon_cs_parser_init.part.1+93    |       128/32    |        96/24    |        4 |        0 | 25.000%
   load_elf_binary+a39                |       512/512   |       392/392   |        1 |        0 | 23.438%
   __alloc_skb+89                     |      6144/877   |      4800/685   |        7 |        6 | 21.875%
   radeon_fence_emit+5c               |      1152/192   |       912/152   |        6 |        0 | 20.833%
   radeon_cs_parser_relocs+ad         |      8192/2048  |      6624/1656  |        4 |        0 | 19.141%
   radeon_sa_bo_new+78                |      1280/64    |      1120/56    |       20 |        0 | 12.500%
   load_elf_binary+2c4                |        32/32    |        28/28    |        1 |        0 | 12.500%
   anon_vma_prepare+101               |       576/72    |       512/64    |        8 |        0 | 11.111%
   ...                                | ...             | ...             | ...    | ...      | ...
  ------------------------------------------------------------------------------------------------------

After:

  ---------------------------------------------------------------------------------------------------------
   Callsite                           | Total_alloc/Per | Total_req/Per   | Hit      | Ping-pong | Frag
  ---------------------------------------------------------------------------------------------------------
   radeon_cs_parser_init.part.1+11a   |      2080/260   |      1504/188   |        8 |         0 | 27.692%
   radeon_cs_parser_init.part.1+e1    |       384/96    |       288/72    |        4 |         0 | 25.000%
   radeon_cs_parser_init.part.1+93    |       128/32    |        96/24    |        4 |         0 | 25.000%
   load_elf_binary+a39                |       512/512   |       392/392   |        1 |         0 | 23.438%
   __alloc_skb+89                     |      6144/877   |      4800/685   |        7 |         6 | 21.875%
   radeon_fence_emit+5c               |      1152/192   |       912/152   |        6 |         0 | 20.833%
   radeon_cs_parser_relocs+ad         |      8192/2048  |      6624/1656  |        4 |         0 | 19.141%
   radeon_sa_bo_new+78                |      1280/64    |      1120/56    |       20 |         0 | 12.500%
   load_elf_binary+2c4                |        32/32    |        28/28    |        1 |         0 | 12.500%
   anon_vma_prepare+101               |       576/72    |       512/64    |        8 |         0 | 11.111%
   ...                                | ...             | ...             | ...      | ...       | ...
  ---------------------------------------------------------------------------------------------------------
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1426145571-3065-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Current perf kmem fails when -v option is used.  As it's very useful for
debugging, let's allow it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1426145571-3065-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>