In the next patch we will be adding a second valid
termination condition which will require a small
amount of refactoring to share logic with the BB_END
case.

Refactor all error conditions to jump to a dedicated
exit path, with 'break' reserved only for a successful
parse.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

For gen9 we enable cmdparsing on the BCS ring, specifically
to catch inadvertent accesses to sensitive registers

Unlike gen7/hsw, we use the parser only to block certain
registers. We can rely on h/w to block restricted commands,
so the command tables only provide enough info to allow the
parser to delineate each command, and identify commands that
access registers.

Note: This patch deliberately ignores checkpatch issues in
favour of matching the style of the surrounding code. We'll
correct the entire file in one go in a later patch.

v3: rebase (Mika)
v4: Add RING_TIMESTAMP registers to whitelist (Jon)
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

In "drm/i915: Add support for mandatory cmdparsing" we introduced the
concept of mandatory parsing. This allows the cmdparser to be invoked
even when user passes batch_len=0 to the execbuf ioctl's.

However, the cmdparser needs to know the extents of the buffer being
scanned. Refactor the code to ensure the cmdparser uses the actual
object size, instead of the incoming length, if user passes 0.
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

For Gen7, the original cmdparser motive was to permit limited
use of register read/write instructions in unprivileged BB's.
This worked by copying the user supplied bb to a kmd owned
bb, and running it in secure mode, from the ggtt, only if
the scanner finds no unsafe commands or registers.

For Gen8+ we can't use this same technique because running bb's
from the ggtt also disables access to ppgtt space. But we also
do not actually require 'secure' execution since we are only
trying to reduce the available command/register set. Instead we
will copy the user buffer to a kmd owned read-only bb in ppgtt,
and run in the usual non-secure mode.

Note that ro pages are only supported by ppgtt (not ggtt), but
luckily that's exactly what we need.

Add the required paths to map the shadow buffer to ppgtt ro for Gen8+

v2: IS_GEN7/IS_GEN (Mika)
v3: rebase
v4: rebase
v5: rebase
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

The existing cmdparser for gen7 can be bypassed by specifying
batch_len=0 in the execbuf call. This is safe because bypassing
simply reduces the cmd-set available.

In a later patch we will introduce cmdparsing for gen9, as a
security measure, which must be strictly enforced since without
it we are vulnerable to DoS attacks.

Introduce the concept of 'required' cmd parsing that cannot be
bypassed by submitting zero-length bb's.

v2: rebase (Mika)
v2: rebase (Mika)
v3: fix conflict on engine flags (Mika)
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

The previous patch has killed support for secure batches
on gen6+, and hence the cmdparsers master tables are
now dead code. Remove them.
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

Retroactively stop reporting support for secure batches
through the api for gen6+ so that older binaries trigger
the fallback path instead.

Older binaries use secure batches pre gen6 to access resources
that are not available to normal usermode processes. However,
all known userspace explicitly checks for HAS_SECURE_BATCHES
before relying on the secure batch feature.

Since there are no known binaries relying on this for newer gens
we can kill secure batches from gen6, via I915_PARAM_HAS_SECURE_BATCHES.

v2: rebase (Mika)
v3: rebase (Mika)
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

We're about to introduce some new tables for later gens, and the
current naming for the gen7 tables will no longer make sense.

v2: rebase
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris.p.wilson@intel.com>

A final attempt at enabling sse2 for GCC users.

Orininally attempted in:
commit 10117450 ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines")

Reverted due to "reported instability" in:
commit 193392ed ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"")

Re-added just for Clang in:
commit 0f0727d9 ("drm/amd/display: readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines")

The original report didn't have enough information to know if the GPF
was due to misalignment, but I suspect that it was. (The missing
information was the disassembly of the function at the bottom of the
trace, to see if the instruction pointer pointed to an instruction with
16B alignment memory operand requirements.  The stack trace does show
the stack was only 8B but not 16B aligned though, which makes this a
strong possibility).

Now that the stack misalignment issue has been fixed for users of GCC
7.1+, reattempt adding -msse2. This matches Clang.

It will likely never be safe to enable this for pre-GCC 7.1 AND use a
16B aligned stack in these translation units.

This is only a functional change for GCC 7.1+ users, and should be boot
tested.

Link: https://bugs.freedesktop.org/show_bug.cgi?id=109487Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GCC earlier than 7.1 errors when compiling code that makes use of
`double`s and sets a stack alignment outside of the range of [2^4-2^12]:

$ cat foo.c
double foo(double x, double y) {
  return x + y;
}
$ gcc-4.9 -mpreferred-stack-boundary=3 foo.c
error: -mpreferred-stack-boundary=3 is not between 4 and 12

This is likely why the AMDGPU driver was ever compiled with a different
stack alignment (and thus different ABI) than the rest of the x86
kernel. The kernel uses 8B stack alignment, while the driver was using
16B stack alignment in a few places.

Since GCC 7.1+ doesn't error, fix the ABI mismatch for users of newer
versions of GCC.

There was discussion about whether to mark the driver broken or not for
users of GCC earlier than 7.1, but since the driver currently is
working, don't explicitly break the driver for them here.

Relying on differing stack alignment is unspecified behavior, and
brittle, and may break in the future.

This patch is no functional change for GCC users earlier than 7.1. It's
been compile tested on GCC 4.9 and 8.3 to check the correct flags. It
should be boot tested when built with GCC 7.1+.

-mincoming-stack-boundary= or -mstackrealign may help keep this code
building for pre-GCC 7.1 users.

The version check for GCC is broken into two conditionals, both because
cc-ifversion is currently GCC specific, and it simplifies a subsequent
patch.
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The x86 kernel is compiled with an 8B stack alignment via
`-mpreferred-stack-boundary=3` for GCC since 3.6-rc1 via
commit d9b0cde9 ("x86-64, gcc: Use -mpreferred-stack-boundary=3 if supported")
or `-mstack-alignment=8` for Clang. Parts of the AMDGPU driver are
compiled with 16B stack alignment.

Generally, the stack alignment is part of the ABI. Linking together two
different translation units with differing stack alignment is dangerous,
particularly when the translation unit with the smaller stack alignment
makes calls into the translation unit with the larger stack alignment.
While 8B aligned stacks are sometimes also 16B aligned, they are not
always.

Multiple users have reported General Protection Faults (GPF) when using
the AMDGPU driver compiled with Clang. Clang is placing objects in stack
slots assuming the stack is 16B aligned, and selecting instructions that
require 16B aligned memory operands.

At runtime, syscall handlers with 8B aligned stack call into code that
assumes 16B stack alignment.  When the stack is a multiple of 8B but not
16B, these instructions result in a GPF.

Remove the code that added compatibility between the differing compiler
flags, as it will result in runtime GPFs when built with Clang. Cleanups
for GCC will be sent in later patches in the series.

Link: https://github.com/ClangBuiltLinux/linux/issues/735Debugged-by: NYuxuan Shui <yshuiv7@gmail.com>
Reported-by: NShirish S <shirish.s@amd.com>
Reported-by: NYuxuan Shui <yshuiv7@gmail.com>
Suggested-by: NAndrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

During kexec some adapters hit an EEH since they are not properly
shut down in the radeon_pci_shutdown() function. Adding
radeon_suspend_kms() fixes this issue.
Enabled only on PPC because this patch causes issues on some other
boards.
Signed-off-by: NKyle Mahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These were not aligned for optimal performance for GPUVM.
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NTianci Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The vega10_odn_update_soc_table() function does not allow the SCLK
dependent voltage to be set for power-state 7 to a value below the default
in pptable. Change the for-loop condition to allow undervolting in the
highest state.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205277Signed-off-by: NPelle van Gils <pelle@vangils.xyz>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

dc.c:583:null check is needed after using kzalloc function
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: Nzhongshiqi <zhong.shiqi@zte.com.cn>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
This patch is for fixing Navi14 HDMI display pink screen issue.

[How]
Call stream->link->link_enc->funcs->setup twice. This is setting
the DIG_MODE to the correct value after having been overridden by
the call to transmitter control.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
i2c_read is called to differentiate passive DP->HDMI and DP->DVI-D dongles
The call is expected to fail in DVI-D case but pass in HDMI case
Some HDMI dongles have a chance to fail as well, causing misdetection as DVI-D

[HOW]
Retry i2c_read to ensure failed result is valid
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
There's a use case for inverted gamma
and it's been confirmed that negative slopes are ok.

[how]
Remove code for blocking non-monotonically increasing gamma
Signed-off-by: NAidan Yang <Aidan.Yang@amd.com>
Reviewed-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Acked-by: NReza Amini <Reza.Amini@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
A display that supports DRR can never really be considered
"synchronized" with any other display because we can dynamically
enable DRR (i.e. without modeset).  this will cause their
relative CRTC positions to drift and lose sync.  this will disrupt
features such as MCLK switching that assume and depend on
their permanent alignment (that can only change with modeset)

[how]
check for ignore_msa in stream when considered synchronizability
this ignore_msa is basically actually implemented as "supports drr"
Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use ERR_PTR to return back the error happened during amdgpu_ib_schedule.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Problem:
When run_job fails and HW fence returned is NULL we still signal
the s_fence to avoid hangs but the user has no way of knowing if
the actual HW job was ran and finished.

Fix:
Allow .run_job implementations to return ERR_PTR in the fence pointer
returned and then set this error for s_fence->finished fence so whoever
wait on this fence can inspect the signaled fence for an error.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

update registers: mmCGTT_SPI_CLK_CTRL
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

update registers: mmCGTT_SPI_CLK_CTRL
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

update registers: mmCGTT_SPI_CLK_CTRL
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
DWB (Display Writeback) flag needs to be enabled as 1, or system
will throw out a few warnings when creating dcn20 resource pool.
Also, Navi14's dwb setting needs to match Navi10's,
which has already been set to 1.

[How]
Change value of num_dwb from 0 to 1.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This seems to help with https://bugs.freedesktop.org/show_bug.cgi?id=111481.

v2: insert a NOP instead of skipping all 0-sized IBs to avoid breaking older hw
Signed-off-by: NPierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VKexample test hang during Occlusion/SDMA/Varia runs.
Clear XNACK_WATERMK in reg SDMA0_UTCL1_WATERMK to fix this issue.
Signed-off-by: Nchen gong <curry.gong@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The change to skip the PCH reference initialization during fastboot
did end up breaking FDI. To fix that let's try to do the PCH reference
init whenever we're disabling a DPLL that was using said reference
previously.

Cc: stable@vger.kernel.org
Tested-by: NAndrija <akijo97@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112084
Fixes: b16c7ed9 ("drm/i915: Do not touch the PCH SSC reference if a PLL is using it")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022185643.1483-1-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>
(cherry picked from commit dd5279c7)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Replace PLLs names used in documentation to that used in the code.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Fixes: 68ff39c3 ("drm/i915/tgl: Add new pll ids")
Signed-off-by: NAnna Karas <anna.karas@intel.com>
Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926123559.15717-1-anna.karas@intel.com
(cherry picked from commit d328bd4f)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

It seems that killing an application while faults are occurring
(particularly with a GPU in FPGA at a whopping 40MHz) can lead to
handling a lingering page fault after all the address space contexts
have already been freed. In this situation, the LRU list is empty so
addr_to_drm_mm_node() ends up dereferencing the list head as if it were
a struct panfrost_mmu entry; this leaves "mmu->as" actually pointing at
the pfdev->alloc_mask bitmap, which is also empty, and given that the
fault has a high likelihood of being in AS0, hilarity ensues.

Sadly, the cleanest solution seems to involve another goto. Oh well, at
least it's robust...

Fixes: 65e51e30 ("drm/panfrost: Prevent race when handling page fault")
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9a0b09e6b5851f0d4428b72dd6b8b4c0d0ef4206.1572293305.git.robin.murphy@arm.com

We get these warnings when build kernel W=1:
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:35:6: warning: no previous prototype for ‘panfrost_perfcnt_clean_cache_done’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:40:6: warning: no previous prototype for ‘panfrost_perfcnt_sample_done’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:190:5: warning: no previous prototype for ‘panfrost_ioctl_perfcnt_enable’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:218:5: warning: no previous prototype for ‘panfrost_ioctl_perfcnt_dump’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:250:6: warning: no previous prototype for ‘panfrost_perfcnt_close’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:264:5: warning: no previous prototype for ‘panfrost_perfcnt_init’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:320:6: warning: no previous prototype for ‘panfrost_perfcnt_fini’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_mmu.c:227:6: warning: no previous prototype for ‘panfrost_mmu_flush_range’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_mmu.c:435:5: warning: no previous prototype for ‘panfrost_mmu_map_fault_addr’ [-Wmissing-prototypes]

For file panfrost_mmu.c, make functions static to fix this.
For file panfrost_perfcnt.c, include header file can fix this.
Signed-off-by: NYi Wang <wang.yi59@zte.com.cn>
Reviewed-by: NSteven Price <steven.price@arm.com>
Cc: stable@vger.kernel.org
[robh: fixup function parameter alignment]
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1571967015-42854-1-git-send-email-wang.yi59@zte.com.cn

etnaviv_iommuv2_dump_size(..) returns the number of PTE * SZ_4K but
etnaviv_iommuv2_dump(..) increments buf pointer even if there is no PTE.
This results in a bad buf pointer which gets used for memcpy(..), when
copying the MMU state in the coredump buffer.

Fixes: afb7b3b1 ("drm/etnaviv: implement IOMMUv2 translation")
Cc: stable@vger.kernel.org
Signed-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>

The switch to per-process address spaces erroneously dropped the check
which validated that the command buffer is mapped through the linear
apperture as required by the hardware. This turned a system
misconfiguration with a helpful error message into a very hard to
debug issue. Reinstate the check at the appropriate location.

Fixes: 17e4660a (drm/etnaviv: implement per-process address spaces on MMUv2)
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Reviewed-by: NGuido Günther <agx@sigxcpu.org>

The GPU coredump function violates the locking order by holding the MMU
context lock while trying to acquire the etnaviv_gem_object lock. This
results in a possible ABBA deadlock with other codepaths which follow
the established locking order.
Fortunately this is easy to fix by dropping the MMU context lock
earlier, as the BO dumping doesn't need the MMU context to be stable.
The only thing the BO dumping cares about are the BO mappings, which
are stable across the lifetime of the job.

Fixes: 27b67278 (drm/etnaviv: rework MMU handling)
[ Not really the first bad commit, but the one where this fix applies
  cleanly. Stable kernels need a manual backport. ]
Reported-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Tested-by: NChristian Gmeiner <christian.gmeiner@gmail.com>

In the impelementation of v3d_submit_cl_ioctl() there are two memory
leaks. One is when allocation for bin fails, and the other is when bin
initialization fails. If kcalloc fails to allocate memory for bin then
render->base should be put. Also, if v3d_job_init() fails to initialize
bin->base then allocated memory for bin should be released.

Fixes: a783a09e ("drm/v3d: Refactor job management.")
Signed-off-by: NNavid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021185250.26130-1-navid.emamdoost@gmail.com

When deferring the probe because of a missing regulator, we were calling
pm_runtime_disable even if pm_runtime_enable wasn't called.

Move the call to pm_runtime_disable to the right place.

Fixes: 63543079 ("drm/panfrost: Rework runtime PM initialization")
Reported-by: NChen-Yu Tsai <wens@csie.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Reviewed-by: NSteven Price <steven.price@arm.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023122157.32067-1-tomeu.vizoso@collabora.com

Fix both the string and the struct member being printed.

Changes since v1:
 - Now with a bonus grammar fix, too.

Fixes: 264b9436 ("drm/komeda: Enable writeback split support")
Reviewed-by: NJames Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: NMihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930122231.33029-1-mihail.atanassov@arm.com

HW doesn't allow flushing inactive pipes and raises an MERR interrupt
if you try to do so. Stop triggering the MERR interrupt in the
middle of a commit by calling drm_atomic_helper_commit_planes
with the ACTIVE_ONLY flag.
Reviewed-by: NJames Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: NMihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010102950.56253-1-mihail.atanassov@arm.com

We need to allocate a large enough buffer for the
feedback buffer, otherwise the IB test can overwrite
other memory.
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org