- 12 8月, 2018 4 次提交
-
-
由 Konstantin Khorenko 提交于
This patch introduces wrappers for accessing in/out streams indirectly. This will enable to replace physically contiguous memory arrays of streams with flexible arrays (or maybe any other appropriate mechanism) which do memory allocation on a per-page basis. Signed-off-by: NOleg Babin <obabin@virtuozzo.com> Signed-off-by: NKonstantin Khorenko <khorenko@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Nault 提交于
pppol2tp_ioctl() has everything in place for handling PPPIOCGL2TPSTATS on session sockets. We just need to copy the stats and set ->session_id. As a side effect of sharing session and tunnel code, ->using_ipsec is properly set even when the request was made using a session socket. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Caleb Raitto 提交于
Make vp_set_vq_affinity() take a cpumask instead of taking a single CPU. If there are fewer queues than cores, queue affinity should be able to map to multiple cores. Link: https://patchwork.ozlabs.org/patch/948149/Suggested-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NCaleb Raitto <caraitto@google.com> Acked-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
Add a new flag to indicate a one-time immediate ACK. This flag is occasionaly set under specific TCP protocol states in addition to the more common quickack mechanism for interactive application. In several cases in the TCP code we want to force an immediate ACK but do not want to call tcp_enter_quickack_mode() because we do not want to forget the icsk_ack.pingpong or icsk_ack.ato state. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NWei Wang <weiwan@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2018 1 次提交
-
-
由 Krzysztof Kozlowski 提交于
Building virtio_net driver without CONFIG_XPS fails with: drivers/net/virtio_net.c: In function ‘virtnet_set_affinity’: drivers/net/virtio_net.c:1910:3: error: implicit declaration of function ‘__netif_set_xps_queue’ [-Werror=implicit-function-declaration] __netif_set_xps_queue(vi->dev, mask, i, false); ^ Fixes: 4d99f660 ("net: allow to call netif_reset_xps_queues() under cpus_read_lock") Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 8月, 2018 5 次提交
-
-
由 Ankit Navik 提交于
Add the definitions for LE address resolution enable HCI commands. When the LE address resolution enable gets changed via HCI commands make sure that flag gets updated. Signed-off-by: NAnkit Navik <ankit.p.navik@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 YueHaibing 提交于
Fixes the following sparse warning: ./include/linux/skbuff.h:2365:58: warning: Using plain integer as NULL pointer Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
This patch adds support for tc mqprio offload, using this different traffic classes on the adapter can be utilized based on configured priority to tc map. For example - tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 This will cause SKBs with priority 0,1,2,3 to transmit over tc 0,1,2,3 hardware queues respectively. Signed-off-by: NManish Chopra <manish.chopra@cavium.com> Signed-off-by: NAriel Elior <ariel.elior@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
Add a new entry to HWIF table for XGMAC 2.10. For now we fill it with empty callbacks which will be added in posterior patches. Signed-off-by: NJose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
Add a helper for MAC drivers to use in their validate callback to deal with 2500BaseX vs 1000BaseX modes, where the hardware supports both but it is not possible to automatically select between them. This helper defaults to 1000BaseX, as that is the 802.3 standard, and will allow users to select 2500BaseX either by forcing the speed if AN is disabled, or by changing the advertising mask if AN is enabled. Disabling AN is not recommended as it is only the speed that we're interested in controlling, not the duplex or pause mode parameters. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 8月, 2018 4 次提交
-
-
由 Eli Cohen 提交于
mlx5_query_vport_admin_state() is not used anywhere. Remove it. Signed-off-by: NEli Cohen <eli@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eran Ben Elisha 提交于
Modify and query vport state commands share the same admin_state and op_mod values, rename the enums to fit them both. In addition, remove the esw prefix from the admin state enum as this also applied for vnic. Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Drozdov 提交于
New firmware has defined new HCA capability field called "max_num_eqs", that is the number of available EQs after subtracting reserved FW EQs. Before this capability the FW reported the EQ number in "log_max_eqs", the reported value also contained FW reserved EQs, but the driver might be failing to load on 320 cpus systems due to the fact that FW reserved EQs were not available to the driver. Now the driver has to obtain max_num_eqs value from new FW to get real number of EQs available. Signed-off-by: NDenis Drozdov <denisd@mellanox.com> Reviewed-by: NAlex Vesker <valex@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
xt_osf_window_size_options was originally part of include/uapi/linux/netfilter/xt_osf.h, restore it. Fixes: bfb15f2a ("netfilter: extract Passive OS fingerprint infrastructure from xt_osf") Signed-off-by: NFernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 08 8月, 2018 6 次提交
-
-
由 Cong Wang 提交于
llc_sap_put() decreases the refcnt before deleting sap from the global list. Therefore, there is a chance llc_sap_find() could find a sap with zero refcnt in this global list. Close this race condition by checking if refcnt is zero or not in llc_sap_find(), if it is zero then it is being removed so we can just treat it as gone. Reported-by: <syzbot+278893f3f7803871f7ce@syzkaller.appspotmail.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arun Parameswaran 提交于
Add support for the Broadcom Omega SoC internal Combo Ethernet GPHY to the bcm7xxx phy driver. Signed-off-by: NArun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
syzbot reported that we reinitialize an active delayed work in vsock_stream_connect(): ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x90 kernel/workqueue.c:1414 WARNING: CPU: 1 PID: 11518 at lib/debugobjects.c:329 debug_print_object+0x16a/0x210 lib/debugobjects.c:326 The pattern is apparently wrong, we should only initialize the dealyed work once and could repeatly schedule it. So we have to move out the initializations to allocation side. And to avoid confusion, we can split the shared dwork into two, instead of re-using the same one. Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Reported-by: <syzbot+8a9b1bd330476a4f3db6@syzkaller.appspotmail.com> Cc: Andy king <acking@vmware.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Allow matching on options in Geneve tunnel headers. This makes use of existing tunnel metadata support. The options can be described in the form CLASS:TYPE:DATA/CLASS_MASK:TYPE_MASK:DATA_MASK, where CLASS is represented as a 16bit hexadecimal value, TYPE as an 8bit hexadecimal value and DATA as a variable length hexadecimal value. e.g. # ip link add name geneve0 type geneve dstport 0 external # tc qdisc add dev geneve0 ingress # tc filter add dev geneve0 protocol ip parent ffff: \ flower \ enc_src_ip 10.0.99.192 \ enc_dst_ip 10.0.99.193 \ enc_key_id 11 \ geneve_opts 0102:80:1122334421314151/ffff:ff:ffffffffffffffff \ ip_proto udp \ action mirred egress redirect dev eth1 This patch adds support for matching Geneve options in the order supplied by the user. This leads to an efficient implementation in the software datapath (and in our opinion hardware datapaths that offload this feature). It is also compatible with Geneve options matching provided by the Open vSwitch kernel datapath which is relevant here as the Flower classifier may be used as a mechanism to program flows into hardware as a form of Open vSwitch datapath offload (sometimes referred to as OVS-TC). The netlink Kernel/Userspace API may be extended, for example by adding a flag, if other matching options are desired, for example matching given options in any order. This would require an implementation in the TC software datapath. And be done in a way that drivers that facilitate offload of the Flower classifier can reject or accept such flows based on hardware datapath capabilities. This approach was discussed and agreed on at Netconf 2017 in Seoul. Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Allow the existing 'dissection' of tunnel metadata to 'dissect' options already present in tunnel metadata. This dissection is controlled by a new dissector key, FLOW_DISSECTOR_KEY_ENC_OPTS. This dissection only occurs when skb_flow_dissect_tunnel_info() is called, currently only the Flower classifier makes that call. So there should be no impact on other users of the flow dissector. This is in preparation for allowing the flower classifier to match on Geneve options. Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Add the ability to specify through ethtool::rxnfc that a rule location is special and will be used to participate in Wake-on-LAN, by e.g: having a specific pattern be matched. When this is the case, fs->ring_cookie must be set to the special value RX_CLS_FLOW_WAKE. We also define an additional ethtool::wolinfo flag: WAKE_FILTER which can be used to configure an Ethernet adapter to allow Wake-on-LAN using previously programmed filters. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 8月, 2018 7 次提交
-
-
由 Harsha Sharma 提交于
This patch allows to add, list and delete connection tracking timeout policies via nft objref infrastructure and assigning these timeout via nft rule. %./libnftnl/examples/nft-ct-timeout-add ip raw cttime tcp Ruleset: table ip raw { ct timeout cttime { protocol tcp; policy = {established: 111, close: 13 } } chain output { type filter hook output priority -300; policy accept; ct timeout set "cttime" } } %./libnftnl/examples/nft-rule-ct-timeout-add ip raw output cttime %conntrack -E [NEW] tcp 6 111 ESTABLISHED src=172.16.19.128 dst=172.16.19.1 sport=22 dport=41360 [UNREPLIED] src=172.16.19.1 dst=172.16.19.128 sport=41360 dport=22 %nft delete rule ip raw output handle <handle> %./libnftnl/examples/nft-ct-timeout-del ip raw cttime Joint work with Pablo Neira. Signed-off-by: NHarsha Sharma <harshasharmaiitr@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
Simplify this, include it inconditionally in this structure layout as we do with ctnetlink. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
The timeout policy is currently embedded into the nfnetlink_cttimeout object, move the policy into an independent object. This allows us to reuse part of the existing conntrack timeout extension from nf_tables without adding dependencies with the nfnetlink_cttimeout object layout. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Harsha Sharma 提交于
As, ctnl_untimeout is required by nft_ct, so move ctnl_timeout from nfnetlink_cttimeout to nf_conntrack_timeout and rename as nf_ct_timeout. Signed-off-by: NHarsha Sharma <harshasharmaiitr@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
As no "genre" on pf.os exceed 16 bytes of length, we reduce NFT_OSF_MAXGENRELEN parameter to 16 bytes and use it instead of IFNAMSIZ. Signed-off-by: NFernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Marcel Holtmann 提交于
Using HCI_VENDOR_PKT for vendor specific events does work since it has also the value 0xff, but it is actually the packet type indicator constant and not the event constant. So introduce HCI_EV_VENDOR and use it. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Jason Wang 提交于
We use to have message like: struct vhost_msg { int type; union { struct vhost_iotlb_msg iotlb; __u8 padding[64]; }; }; Unfortunately, there will be a hole of 32bit in 64bit machine because of the alignment. This leads a different formats between 32bit API and 64bit API. What's more it will break 32bit program running on 64bit machine. So fixing this by introducing a new message type with an explicit 32bit reserved field after type like: struct vhost_msg_v2 { __u32 type; __u32 reserved; union { struct vhost_iotlb_msg iotlb; __u8 padding[64]; }; }; We will have a consistent ABI after switching to use this. To enable this capability, introduce a new ioctl (VHOST_SET_BAKCEND_FEATURE) for userspace to enable this feature (VHOST_BACKEND_F_IOTLB_V2). Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 8月, 2018 4 次提交
-
-
由 Peter Oskolkov 提交于
Similar to TCP OOO RX queue, it makes sense to use rb trees to store IP fragments, so that OOO fragments are inserted faster. Tested: - a follow-up patch contains a rather comprehensive ip defrag self-test (functional) - ran neper `udp_stream -c -H <host> -F 100 -l 300 -T 20`: netstat --statistics Ip: 282078937 total packets received 0 forwarded 0 incoming packets discarded 946760 incoming packets delivered 18743456 requests sent out 101 fragments dropped after timeout 282077129 reassemblies required 944952 packets reassembled ok 262734239 packet reassembles failed (The numbers/stats above are somewhat better re: reassemblies vs a kernel without this patchset. More comprehensive performance testing TBD). Reported-by: NJann Horn <jannh@google.com> Reported-by: NJuha-Matti Tilli <juha-matti.tilli@iki.fi> Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Oskolkov 提交于
Tested: see the next patch is the series. Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Oskolkov 提交于
This behavior is required in IPv6, and there is little need to tolerate overlapping fragments in IPv4. This change simplifies the code and eliminates potential DDoS attack vectors. Tested: ran ip_defrag selftest (not yet available uptream). Suggested-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yangbo Lu 提交于
This patch is to support automatic configuration for ptp timer. If required ptp dts properties are not provided, driver could try to calculate a set of default configurations to initialize the ptp timer. This makes the driver work for many boards which don't have the required ptp dts properties in current kernel. Also the users could set dts properties by themselves according to their requirement. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 8月, 2018 2 次提交
-
-
由 Florian Fainelli 提交于
Android's header sanitization tool chokes on static inline functions having a trailing semicolon, leading to an incorrectly parsed header file. While the tool should obviously be fixed, also fix the header files for the two affected functions: ethtool_get_flow_spec_ring() and ethtool_get_flow_spec_ring_vf(). Fixes: 8cf6f497 ("ethtool: Add helper routines to pass vf to rx_flow_spec") Reporetd-by: NBlair Prescott <blair.prescott@broadcom.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 zhong jiang 提交于
We prefer to ARRAY_SIZE rather than the open code to calculate size. Signed-off-by: Nzhong jiang <zhongjiang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 8月, 2018 7 次提交
-
-
由 David Howells 提交于
Push iov_iter up from rxrpc_kernel_recv_data() to its caller to allow non-contiguous iovs to be passed down, thereby permitting file reading to be simplified in the AFS filesystem in a future patch. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Máté Eckl 提交于
Netfilter exposes standard hook priorities in case of ipv4, ipv6 and arp but not in case of bridge. This patch exposes the hook priority values of the bridge family (which are different from the formerly mentioned) via uapi so that they can be used by user-space applications just like the others. Signed-off-by: NMáté Eckl <ecklm94@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This patch allows us to match on the tunnel metadata that is available of the packet. We can use this to validate if the packet comes from/goes to tunnel and the corresponding tunnel ID. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This patch implements the tunnel object type that can be used to configure tunnels via metadata template through the existing lightweight API from the ingress path. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Guillaume Nault 提交于
This attribute's handling is broken. It can only be used when creating Ethernet pseudo-wires, in which case its value can be used as the initial MTU for the l2tpeth device. However, when handling update requests, L2TP_ATTR_MTU only modifies session->mtu. This value is never propagated to the l2tpeth device. Dump requests also return the value of session->mtu, which is not synchronised anymore with the device MTU. The same problem occurs if the device MTU is properly updated using the generic IFLA_MTU attribute. In this case, session->mtu is not updated, and L2TP_ATTR_MTU will report an invalid value again when dumping the session. It does not seem worthwhile to complexify l2tp_eth.c to synchronise session->mtu with the device MTU. Even the ip-l2tp manpage advises to use 'ip link' to initialise the MTU of l2tpeth devices (iproute2 does not handle L2TP_ATTR_MTU at all anyway). So let's just ignore it entirely. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
The first client of the nf_osf.h userspace header is nft_osf, coming in this batch, rename it to nfnetlink_osf.h as there are no userspace clients for this yet, hence this looks consistent with other nfnetlink subsystem. Suggested-by: NJan Engelhardt <jengelh@inai.de> Signed-off-by: NFernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
All warnings (new ones prefixed by >>): >> ./usr/include/linux/netfilter/nf_osf.h:73: userspace cannot reference function or variable defined in the kernel Fixes: f9324952 ("netfilter: nfnetlink_osf: extract nfnetlink_subsystem code from xt_osf.c") Reported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NFernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-