This is part of the "device memory" type, but with the
subtypes we can now detect it properly, rather than
having to make assumptions on the ID.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204174546.91d33aa9dd3d.Ifb48e21fbb92ea25360856b5cc2afbb9b485d6b3@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

In next region tlv (3) region type is going to be split into bit mask
without affecting the ops for handling region type, so we just mask
the type independent of the version due to all versions having the
same bits usage.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204130722.083e4b47055e.If7483d854e3d07f81236d314b8155cd5996f306c@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We have a MAC component (which is inside the SoC) and it has several
different HW steps.  3 bits used to be enough but now we need 4-bits
to represent all the different steps.

Properly support 4-bits in the MAC step value by refactoring all the
current handling of the MAC step/dash.

Already from family 8000 and up the dash (bits 0-1) no longer exists
and the step (until 8000 bits 2-3) consists of the dash bits as well.

To do this remove the CSR_HW_REV_STEP and the CSR_HW_REV_DASH
macros, replace them with CSR_HW_REV_STEP_DASH and add hw_rev_step
into the trans struct.

In addition remove the CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP and
CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH macros and create a new macro
combining the 2 (this way we don't need shifting or anything else.)
Signed-off-by: NMatti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: NMike Golant <michael.golant@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211207160459.2e81a14d1f80.Ia5287e37fb3439d805336837361f6491f958e465@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

In firmware dumps, currently all kinds of key material may be
included, e.g. in host commands (if firmware crashes during the
processing of a key-related command) or in the TX FIFO(s) if
we have been using in-TX-command key material.

Additionally, some firmware versions will advertise sections
of their internal data to not dump, due to them containing some
sensitive data.

Add some infrastructure to allow scrubbing this data out, as
dependent on the opmode's idea of what will need to be done.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.360cc8fe55b1.Ie3bd3ece38043969f7e116e61a6ec1197a58d78b@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

When having a blank OTP the only way to get the rf id
and the cdb info is from prph registers.

Currently there is some implementation for this, but it
is located in the wrong place in the code (should be before
trying to understand what HW is connected and not after),
and it has a partial implementation.
Signed-off-by: NMatti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.820c2ae18c2b.Iec9b2e2615ce65e6aff5ce896589227a7030f4cf@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

new region handling is added  for dump collection.
Signed-off-by: NMukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210819183728.af9a24b82396.I53c5f82bd2d0f56fd699e3841c922082d99f1c90@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The debug dump ranges aren't just an array of such ranges
since each range has a variable size. Therefore, the use
of a struct array is misleading at best.

Change it to be a u8 data[] instead of the struct array,
the code doesn't significantly change since it's actually
doing things correctly now.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210819183728.693c9891097d.Idcaab1fd659e8be2f56be647b2534befd61a4460@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

In commit 79f033f6 ("iwlwifi: dbg: don't limit dump decisions
to all or monitor") we changed the code to pass around a bitmap,
but in the monitor_only case, one place accidentally used the bit
number, not the bit mask, resulting in CSR and FW_INFO getting
dumped instead of monitor data. Fix that.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.774fd8729a33.Ic985a787071d1c0b127ef0ba8367da896ee11f57@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

In some cases it may be necessary to synchronously create
a firmware error report, add the necessary infrastructure
for this.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.481b6642f0fc.I7c9c958408a285e3d19aceed2a5a3341cfc08382@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Conceptually, this belongs more into the firmware utils
rather than the mvm opmode, so move the collection and
output there.

Note that this slightly changes the format of the Status
line.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.b82b60d81346.Ide3b688107f6a59c7fc7eb1d8f2002b0a5c1f2d2@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Region TLV version 2 now includes more data, but it is not
relevant for the driver.
In order to support this new version, just mask the new part out.
Signed-off-by: NMukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.60dd4c60ab49.I44fe02af389d3ab089363bf9bde0d99a4c1ff383@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

It can be confusing to see "Collecting data: ..." followed by
that not actually happening immediately so print out the delay
in that message.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.5bd095dc579a.Id1f3b746ac61497951638ba7ce70fc4b63dd87d1@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Return value of the iwl_mvm_load_nvm_to_nic func is not analyzed. If load
NVM to nic func fails and NVM is not loaded to fw properly, then fw may
behave badly and lead to some strange issue. This commit will analyze
return value and if load NVM to nic has failed, then the error code is
sent to the previous func, which will trigger WRT log collection.
iwl_fw_dbg_error_collect() func collects dump only if tri type is
FW_DBG_TRIGGER_ALIVE_TIMEOUT. But when Load NVM to nic function fails
trig_type is FW_DBG_TRIGGER_DRIVER. This commit also has code changes to
collect dump when trig_type is FW_DBG_TRIGGER_DRIVER.
Signed-off-by: NAbhishek Naik <abhishek.naik@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.32998850192a.Ic58d08cb6944ca55e343ff0032c82cfa7821e588@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Since we no longer save interrupts, we no longer need the flags
argument here, remove it throughout.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.8de8fe6f9fff.If040b056d0e8c771c65ac5c29230f939354a142b@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

In case user requested to register an unsupported regions,
remove it from active list and trigger list, this saves operational
driver memory and run time at collecting debug data.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.a0cc944040e8.I3ae37547452b39f8040428c21ed47bdc67ae8f71@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We skip index 0 that holds CSS section which isn't relevant for paged
memory.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210117130510.ad2df68fccbc.I381f931c6e7606c21935ec6667619b209224e408@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/intel/iwlwifi/fw/dbg.c:1932: warning: Function parameter or member 'reg_data' not described in 'iwl_dump_ini_mem'
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c:1932: warning: Excess function parameter 'reg' description in 'iwl_dump_ini_mem'

Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126133152.3211309-15-lee.jones@linaro.org

Use SPDX tags instead of the long copyright notices.  Also cleanup
some duplicate copyright notices and combine the years where possible.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

from AX210 generation the write pointer is in Bytes.
to be align with all previous HWs convert it DWs.
Signed-off-by: NRotem Saado <rotem.saado@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231351.c9a9cbef4a09.Ic7df63c617f79b7e6a95a510c51b3516bba5599f@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

This enables analyzing phy/HW bugs.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231351.53bce4f8353d.Ia6944582bd2c748387aaef96755d8919c5d25dc1@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

With the new region we can handle in user space understanding
the struct type and version and driver doesn't need to be involved
at all.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.88c431fad7da.I282944cbad5aa367735a9f9a5c47cfbd107a5fc0@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

IWL_WARN seems excessive here since this can happen during normal
operation. Every time I connect to a new network with 8086:24fd I get
this as KERN_WARNING on the console, which mildly distracts from other
more pressing messages. For example:

    % sudo journalctl _TRANSPORT=kernel | grep -c 'FW already configured'
    403
Signed-off-by: NChris Down <chris@chrisdown.name>
Cc: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20191017144841.GA16393@chrisdown.nameSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

There are several "flavors" of HW that have the same HW type, but
can be told apart after reading a certain perph register. This
is easy to do in runtime, but more complicated to do when looking
at the logs offline.

To make it easier to tell apart these "flavors" when looking at
the dumped dbg info, add these bits to the HW type, allowing
simple differentiation.
Signed-off-by: NLiad Kaufman <liad.kaufman@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200425130140.330ea11d17ae.Ie59b25430a308090b15112ac6deedf4fbf487ff1@changeid

If CONFIG_IWLWIFI_DEBUGFS is not set, the variable is assigned
but not checked, resulting in a compiler warning. Suppress it,
we need the variable for the debugfs-enabled case.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200425130140.485f886f5a6c.I8a91c560c26cced33b15d8419caebb53a9abcc2d@changeid

The for loop is iterating over active regions so iterate only
over the len of the active regions buffer size.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.e10482b9eed7.I15da7bb25d9b9e3eef1c1b117dc585e703ce756a@changeid

To avoid static analysis warning and to make the flow more readable, set
the debug descriptor to NULL outside iwl_fw_free_dump_desc and only in
the required places.
Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.5d5c50750a52.I17e33fc268c2097b7c42877f86cef2aa163b913a@changeid

Also we can only have one fid1 or fid2 set so no need to check
if the fid2 is set in case fid1 wasn't set.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424182644.34e74106bad3.Ic3a9f0a35fed47b02ebcd27c2dc2b50cb1e56bdf@changeid

The new version adds the information for RX2C FIFO addresses.

Use the new addresses to parse the FIFO info when dumping.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424182643.97cc25d96b53.I65fd0400d80f505bd6d7eed442f12db24b25bbe3@changeid

Allow the driver to perform dump collection in case of alive notification
timeout in yoyo mode.
Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200417131727.bd46e6240590.Ibda6d9d330a1ae49670152cede34629b280f6cf9@changeid

Support multiple debug data collection triggers in legacy flow.
Utilize the already existing Yoyo infra so the change is rather simple.
Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200417131727.5be6a1923cbe.I10701236b03f66328041f2a38f5f0f22a26fd40b@changeid

When we have an assert during D3 we want to dump the internal
buffer memory even if are we working in DRAM debug mode.  We should not
block dumping it.

Change-Id: I69aad2d4904c4f8bb653c61e8781a2e07780054f
Signed-off-by: NRotem Saado <rotem.saado@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add a new region type that allows us to dump the PCI config space.
This is mostly the same as dumping a memory region, but reading from
the device's config space instead.

In order to make this generic and independent of the trans type, we
make a function called iwl_dump_ini_config_iter() that calls a new op
in the transport to read its config space.

Change-Id: I15151bddf589f13b0e0a45c28b96bbcd73bcfdeb
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

If the firmware is in a bad state or not initialized fully, sending
the DBGC_SUSPEND_RESUME command fails but we can still collect logs.

Instead of aborting the entire dump process, simply ignore the error.
By removing the last callpoint that was checking the return value, we
can also convert the function to return void.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Fixes: 57605833 ("iwlwifi: dbg: support debug recording suspend resume command")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200306151129.dcec37b2efd4.I8dcd190431d110a6a0e88095ce93591ccfb3d78d@changeid

The TLV offset is only used to read registers, while the offset used for
the FIFO addresses are hard coded in the driver and not given by the
TLV.

If we try to apply the TLV offset when reading the FIFOs, we'll read
from invalid addresses, causing the driver to hang.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Fixes: 8d7dea25 ("iwlwifi: dbg_ini: implement Rx fifos dump")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200306151129.fbab869c26fa.I4ddac20d02f9bce41855a816aa6855c89bc3874e@changeid

We have a lot of mostly duplicated data structures that are repeated
only because the device name string is different.  To avoid this, move
the string from the cfg to the trans structure and add it
independently from the rest of the configuration to the PCI mapping
tables.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Now that we can't change the domain at runtime anymore, we don't have
to protect the active trigger status.  Remove it.  Additionally, we
don't need to flush the dumps at this point anymore, since this only
runs during initialization and there shouldn't be any dumps running.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

The driver is required to stop the debug monitor HW recording regardless
of the debug configuration since the driver is responsible to halt the
FW DBGC.
Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Before we start looping over the internal TX FIFOs increase the fifo
number, but that's incorrect and causes a FIFO to be skipped.  This is
probably due to a copy and paste from the previous loop.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

During dump flow, the driver allocates spaces to store the memory
regions that will be included in the dump. These regions can be very
large so in order to avoid allocation failure, use vzalloc instead.
The kmalloc uses GFP_KERNEL and the driver does not make any use of the
fact that the memory is contiguous so the same functionality is
maintained.
Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Allow the driver to collect FW response/notification region type
during dump and allow triggering dump collection for a given FW
response/notification.
Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>