Move initialization of 'struct kvm_mmu' fields into alloc_mmu_pages() to
consolidate code, and rename the helper to __kvm_mmu_create().

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923163314.8181-1-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Read vmcs.EXIT_QUALIFICATION and vmcs.VM_EXIT_INTR_INFO only if the
VM-Exit is being reflected to L1 now that they are no longer passed
directly to the kvm_nested_vmexit tracepoint.

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-8-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use the newly introduced TRACE_EVENT_KVM_EXIT to define the guts of
kvm_nested_vmexit so that it captures and prints the same information as
kvm_exit.  This has the bonus side effect of fixing the interrupt info
and error code printing for the case where they're invalid, e.g. if the
exit was a failed VM-Entry.  This also sets the stage for retrieving
EXIT_QUALIFICATION and VM_EXIT_INTR_INFO in nested_vmx_reflect_vmexit()
if and only if the VM-Exit is being routed to L1.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-7-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Macrofy the definition of kvm_exit so that the definition can be reused
verbatim by kvm_nested_vmexit.

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-6-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Extend the kvm_exit tracepoint to align it with kvm_nested_vmexit in
terms of what information is captured.  On SVM, add interrupt info and
error code, while on VMX it add IDT vectoring and error code.  This
sets the stage for macrofying the kvm_exit tracepoint definition so that
it can be reused for kvm_nested_vmexit without loss of information.

Opportunistically stuff a zero for VM_EXIT_INTR_INFO if the VM-Enter
failed, as the field is guaranteed to be invalid.  Note, it'd be
possible to further filter the interrupt/exception fields based on the
VM-Exit reason, but the helper is intended only for tracepoints, i.e.
an extra VMREAD or two is a non-issue, the failed VM-Enter case is just
low hanging fruit.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-5-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a helper, is_exception_with_error_code(), to provide the simple but
difficult to read code of checking for a valid exception with an error
code given a vmcs.VM_EXIT_INTR_INFO value.  The helper will gain another
user, vmx_get_exit_info(), in a future patch.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-4-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use kvm_rip_read() to read the guest's RIP for the nested VM-Exit
tracepoint instead of having the caller pass in an argument.  Params
that are passed into a tracepoint are evaluated even if the tracepoint
is disabled, i.e. passing in RIP for VMX incurs a VMREAD and retpoline
to retrieve a value that may never be used, e.g. if the exit is due to a
hardware interrupt.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-3-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add RIP to the kvm_entry tracepoint to help debug if the kvm_exit
tracepoint is disabled or if VM-Enter fails, in which case the kvm_exit
tracepoint won't be hit.

Read RIP from within the tracepoint itself to avoid a potential VMREAD
and retpoline if the guest's RIP isn't available.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923201349.16097-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

WARN if KVM attempts to switch to the currently loaded VMCS.  Now that
nested_vmx_free_vcpu() doesn't blindly call vmx_switch_vmcs(), all paths
that lead to vmx_switch_vmcs() are implicitly guarded by guest vs. host
mode, e.g. KVM should never emulate VMX instructions when guest mode is
active, and nested_vmx_vmexit() should never be called when host mode is
active.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-8-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Remove the explicit switch to vmcs01 and the call to free_nested() in
nested_vmx_free_vcpu().  free_nested(), which is called unconditionally
by vmx_leave_nested(), ensures vmcs01 is loaded prior to freeing vmcs02
and friends.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-7-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a WARN in free_nested() to ensure vmcs01 is loaded prior to freeing
vmcs02 and friends, and explicitly switch to vmcs01 if it's not.  KVM is
supposed to keep is_guest_mode() and loaded_vmcs==vmcs02 synchronized,
but bugs happen and freeing vmcs02 while it's in use will escalate a KVM
error to a use-after-free and potentially crash the kernel.

Do the WARN and switch even in the !vmxon case to help detect latent
bugs.  free_nested() is not a hot path, and the check is cheap.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-6-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move free_nested() down below vmx_switch_vmcs() so that a future patch
can do an "emergency" invocation of vmx_switch_vmcs() if vmcs01 is not
the loaded VMCS when freeing nested resources.

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-5-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Call guest_state_valid() directly instead of querying emulation_required
when checking if L1 is attempting VM-Enter with invalid guest state.
If emulate_invalid_guest_state is false, KVM will fixup segment regs to
avoid emulation and will never set emulation_required, i.e. KVM will
incorrectly miss the associated consistency checks because the nested
path stuffs segments directly into vmcs02.

Opportunsitically add Consistency Check tracing to make future debug
suck a little less.

Fixes: 2bb8cafe ("KVM: vVMX: signal failure for nested VMEntry if emulation_required")
Fixes: 3184a995 ("KVM: nVMX: fix vmentry failure code when L2 state would require emulation")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-4-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reload vmcs01 when bailing from nested_vmx_enter_non_root_mode() as KVM
expects vmcs01 to be loaded when is_guest_mode() is false.

Fixes: 671ddc70 ("KVM: nVMX: Don't leak L1 MMIO regions to L2")
Cc: stable@vger.kernel.org
Cc: Dan Cross <dcross@google.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Peter Shier <pshier@google.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-3-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Explicitly reset the segment cache after stuffing guest segment regs in
prepare_vmcs02_rare().  Although the cache is reset when switching to
vmcs02, there is nothing that prevents KVM from re-populating the cache
prior to writing vmcs02 with vmcs12's values.  E.g. if the vCPU is
preempted after switching to vmcs02 but before prepare_vmcs02_rare(),
kvm_arch_vcpu_put() will dereference GUEST_SS_AR_BYTES via .get_cpl()
and cache the stale vmcs02 value.  While the current code base only
caches stale data in the preemption case, it's theoretically possible
future code could read a segment register during the nested flow itself,
i.e. this isn't technically illegal behavior in kvm_arch_vcpu_put(),
although it did introduce the bug.

This manifests as an unexpected nested VM-Enter failure when running
with unrestricted guest disabled if the above preemption case coincides
with L1 switching L2's CPL, e.g. when switching from a L2 vCPU at CPL3
to to a L2 vCPU at CPL0.  stack_segment_valid() will see the new SS_SEL
but the old SS_AR_BYTES and incorrectly mark the guest state as invalid
due to SS.dpl != SS.rpl.

Don't bother updating the cache even though prepare_vmcs02_rare() writes
every segment.  With unrestricted guest, guest segments are almost never
read, let alone L2 guest segments.  On the other hand, populating the
cache requires a large number of memory writes, i.e. it's unlikely to be
a net win.  Updating the cache would be a win when unrestricted guest is
not supported, as guest_state_valid() will immediately cache all segment
registers.  But, nested virtualization without unrestricted guest is
dirt slow, saving some VMREADs won't change that, and every CPU
manufactured in the last decade supports unrestricted guest.  In other
words, the extra (minor) complexity isn't worth the trouble.

Note, kvm_arch_vcpu_put() may see stale data when querying guest CPL
depending on when preemption occurs.  This is "ok" in that the usage is
imperfect by nature, i.e. it's used heuristically to improve performance
but doesn't affect functionality.  kvm_arch_vcpu_put() could be "fixed"
by also disabling preemption while loading segments, but that's
pointless and misleading as reading state from kvm_sched_{in,out}() is
guaranteed to see stale data in one form or another.  E.g. even if all
the usage of regs_avail is fixed to call kvm_register_mark_available()
after the associated state is set, the individual state might still be
stale with respect to the overall vCPU state.  I.e. making functional
decisions in an asynchronous hook is doomed from the get go.  Thankfully
KVM doesn't do that.

Fixes: de63ad4c ("KVM: X86: implement the logic for spinlock optimization")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923184452.980-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use bools to track write and user faults throughout the page fault paths
and down into mmu_set_spte().  The actual usage is purely boolean, but
that's not obvious without digging into all paths as the current code
uses a mix of bools (TDP and try_async_pf) and ints (shadow paging and
mmu_set_spte()).

No true functional change intended (although the pgprintk() will now
print 0/1 instead of 0/PFERR_WRITE_MASK).
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183735.584-9-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the "ITLB multi-hit workaround enabled" check into the callers of
disallowed_hugepage_adjust() to make it more obvious that the helper is
specific to the workaround, and to be consistent with the accounting,
i.e. account_huge_nx_page() is called if and only if the workaround is
enabled.

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183735.584-8-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rename 'hlevel', which presumably stands for 'host level', to simply
'level' in FNAME(fetch).  The variable hasn't tracked the host level for
quite some time.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183735.584-7-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Condition the accounting of a disallowed huge NX page on the original
requested level of the page being greater than the current iterator
level.  This does two things: accounts the page if and only if a huge
page was actually disallowed, and accounts the shadow page if and only
if it was the level at which the huge page was disallowed.  For the
latter case, the previous logic would account all shadow pages used to
create the translation for the forced small page, e.g. even PML4, which
can't be a huge page on current hardware, would be accounted as having
been a disallowed huge page when using 5-level EPT.

The overzealous accounting is purely a performance issue, i.e. the
recovery thread will spuriously zap shadow pages, but otherwise the bad
behavior is harmless.

Cc: Junaid Shahid <junaids@google.com>
Fixes: b8e8c830 ("kvm: mmu: ITLB_MULTIHIT mitigation")
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183735.584-6-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Apply the "huge page disallowed" adjustment of the max level only after
capturing the original requested level.  The requested level will be
used in a future patch to skip adding pages to the list of disallowed
huge pages if a huge page wasn't possible anyways, e.g. if the page
isn't mapped as a huge page in the host.

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183735.584-5-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Calculate huge_page_disallowed in __direct_map() and FNAME(fetch) in
preparation for reworking the calculation so that it preserves the
requested map level and eventually to avoid flagging a shadow page as
being disallowed for being used as a large/huge page when it couldn't
have been huge in the first place, e.g. because the backing page in the
host is not large.

Pass the error code into the helpers and use it to recalcuate exec and
write_fault instead adding yet more booleans to the parameters.

Opportunistically use huge_page_disallowed instead of lpage_disallowed
to match the nomenclature used within the mapping helpers (though even
they have existing inconsistencies).

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183735.584-4-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Refactor the zap loop in kvm_recover_nx_lpages() to be a for loop that
iterates on to_zap and drop the !to_zap check that leads to the in-loop
calling of kvm_mmu_commit_zap_page().  The in-loop commit when to_zap
hits zero is superfluous now that there's an unconditional commit after
the loop to handle the case where lpage_disallowed_mmu_pages is emptied.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183735.584-3-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Call kvm_mmu_commit_zap_page() after exiting the "prepare zap" loop in
kvm_recover_nx_lpages() to finish zapping pages in the unlikely event
that the loop exited due to lpage_disallowed_mmu_pages being empty.
Because the recovery thread drops mmu_lock() when rescheduling, it's
possible that lpage_disallowed_mmu_pages could be emptied by a different
thread without to_zap reaching zero despite to_zap being derived from
the number of disallowed lpages.

Fixes: 1aa9b957 ("kvm: x86: mmu: Recovery of shattered NX large pages")
Cc: Junaid Shahid <junaids@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183735.584-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rename ops.h to vmx_ops.h to allow adding a tdx_ops.h in the future
without causing massive confusion.

Trust Domain Extensions (TDX) is built on VMX, but KVM cannot directly
access the VMCS(es) for a TDX guest, thus TDX will need its own "ops"
implementation for wrapping the low level operations.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183112.3030-3-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Extract the posted interrupt code so that it can be reused for Trust
Domain Extensions (TDX), which requires posted interrupts and can use
KVM VMX's implementation almost verbatim.  TDX is different enough from
raw VMX that it is highly desirable to implement the guts of TDX in a
separate file, i.e. reusing posted interrupt code by shoving TDX support
into vmx.c would be a mess.
Signed-off-by: NXiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183112.3030-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Detect spurious page faults, e.g. page faults that occur when multiple
vCPUs simultaneously access a not-present page, and skip the SPTE write,
prefetch, and stats update for spurious faults.

Note, the performance benefits of skipping the write and prefetch are
likely negligible, and the false positive stats adjustment is probably
lost in the noise.  The primary motivation is to play nice with TDX's
SEPT in the long term.  SEAMCALLs (to program SEPT entries) are quite
costly, e.g. thousands of cycles, and a spurious SEPT update will result
in a SEAMCALL error (which KVM will ideally treat as fatal).
Reported-by: NKai Huang <kai.huang@intel.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923220425.18402-5-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Introduce RET_PF_FIXED and RET_PF_SPURIOUS to provide unique return
values instead of overloading RET_PF_RETRY.  In the short term, the
unique values add clarity to the code and RET_PF_SPURIOUS will be used
by set_spte() to avoid unnecessary work for spurious faults.

In the long term, TDX will use RET_PF_FIXED to deterministically map
memory during pre-boot.  The page fault flow may bail early for benign
reasons, e.g. if the mmu_notifier fires for an unrelated address.  With
only RET_PF_RETRY, it's impossible for the caller to distinguish between
"cool, page is mapped" and "darn, need to try again", and thus cannot
handle benign cases like the mmu_notifier retry.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923220425.18402-4-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Explicitly check for RET_PF_EMULATE instead of implicitly doing the same
by checking for !RET_PF_RETRY (RET_PF_INVALID is handled earlier).  This
will adding new RET_PF_ types in future patches without breaking the
emulation path.

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923220425.18402-3-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Exit to userspace with an error if the MMU is buggy and returns
RET_PF_INVALID when servicing a page fault.  This will allow a future
patch to invert the emulation path, i.e. emulate only on RET_PF_EMULATE
instead of emulating on anything but RET_PF_RETRY.  This technically
means that KVM will exit to userspace instead of emulating on
RET_PF_INVALID, but practically speaking it's a nop as the MMU never
returns RET_PF_INVALID.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923220425.18402-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Recursively zap all to-be-orphaned children, unsynced or otherwise, when
zapping a shadow page for a nested TDP MMU.  KVM currently only zaps the
unsynced child pages, but not the synced ones.  This can create problems
over time when running many nested guests because it leaves unlinked
pages which will not be freed until the page quota is hit. With the
default page quota of 20 shadow pages per 1000 guest pages, this looks
like a memory leak and can degrade MMU performance.

In a recent benchmark, substantial performance degradation was observed:
An L1 guest was booted with 64G memory.
2G nested Windows guests were booted, 10 at a time for 20
iterations. (200 total boots)
Windows was used in this benchmark because they touch all of their
memory on startup.
By the end of the benchmark, the nested guests were taking ~10% longer
to boot. With this patch there is no degradation in boot time.
Without this patch the benchmark ends with hundreds of thousands of
stale EPT02 pages cluttering up rmaps and the page hash map. As a
result, VM shutdown is also much slower: deleting memslot 0 was
observed to take over a minute. With this patch it takes just a
few miliseconds.

Cc: Peter Shier <pshier@google.com>
Signed-off-by: NBen Gardon <bgardon@google.com>
Co-developed-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923221406.16297-3-sean.j.christopherson@intel.com>
Reviewed-by: NBen Gardon <bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the logic that controls whether or not FNAME(invlpg) needs to flush
fully into FNAME(invlpg) so that mmu_page_zap_pte() doesn't return a
value.  This allows a future patch to redefine the return semantics for
mmu_page_zap_pte() so that it can recursively zap orphaned child shadow
pages for nested TDP MMUs.

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923221406.16297-2-sean.j.christopherson@intel.com>
Reviewed-by: NBen Gardon <bgardon@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Hyper-V Synthetic timers require SynIC but we don't seem to check that
upon HV_X64_MSR_STIMER[X]_CONFIG/HV_X64_MSR_STIMER0_COUNT writes. Make
the behavior match synic_set_msr().
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200924145757.1035782-3-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We forgot to update KVM_GET_SUPPORTED_HV_CPUID's documentation in api.rst
when SynDBG leaves were added.

While on it, fix 'KVM_GET_SUPPORTED_CPUID' copy-paste error.

Fixes: f97f5a56 ("x86/kvm/hyper-v: Add support for synthetic debugger interface")
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200924145757.1035782-2-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

To make kvm_mmu_free_roots() a bit more readable, capture 'kvm' in a
local variable instead of doing vcpu->kvm over and over (and over).

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923191204.8410-1-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a helper function and several wrapping macros to consolidate the
copy-paste code in vmx_compute_secondary_exec_control() for adjusting
controls that are dependent on guest CPUID bits.

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200925003011.21016-1-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rename SECONDARY_EXEC_RDTSCP to SECONDARY_EXEC_ENABLE_RDTSCP in
preparation for consolidating the logic for adjusting secondary exec
controls based on the guest CPUID model.

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923165048.20486-4-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If PCID is not exposed to the guest, clear INVPCID in the guest's CPUID
even if the VMCS INVPCID enable is not supported.  This will allow
consolidating the secondary execution control adjustment code without
having to special case INVPCID.

Technically, this fixes a bug where !CPUID.PCID && CPUID.INVCPID would
result in unexpected guest behavior (#UD instead of #GP/#PF), but KVM
doesn't support exposing INVPCID if it's not supported in the VMCS, i.e.
such a config is broken/bogus no matter what.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923165048.20486-3-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rename helpers for a few controls to conform to the more prevelant style
of cpu_has_vmx_<feature>().  Consistent names will allow adding macros
to consolidate the boilerplate code for adjusting secondary execution
controls.

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923165048.20486-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The 'arch_haltpoll_disable' is used to disable guest halt poll.
Correct the comments.

Fixes: a1c4423b ("cpuidle-haltpoll: disable host side polling when kvm virtualized")
Signed-off-by: NLi Qiang <liq3ea@163.com>
Message-Id: <20200924155800.4939-1-liq3ea@163.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use kvm_vcpu_is_illegal_gpa() to check for a legal GPA when validating a
PT output base instead of open coding a clever, but difficult to read,
variant.  Code readability is far more important than shaving a few uops
in a slow path.

No functional change intended.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200924194250.19137-6-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>