The header lapic.h is included more than once, remove one of them.
Signed-off-by: NLike Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-2-likexu@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge branch for features that did not make it into 5.18:

* New ioctls to get/set TSC frequency for a whole VM

* Allow userspace to opt out of hypercall patching

Nested virtualization improvements for AMD:

* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
  nested vGIF)

* Allow AVIC to co-exist with a nested guest running

* Fixes for LBR virtualizations when a nested guest is running,
  and nested LBR virtualization support

* PAUSE filtering for nested hypervisors

Guest support:

* Decoupling of vcpu_is_preempted from PV spinlocks
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The following WARN is triggered from kvm_vm_ioctl_set_clock():
 WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm]
 ...
 CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G        W  O      5.16.0.stable #20
 Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021
 RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm]
 ...
 Call Trace:
  <TASK>
  ? kvm_write_guest+0x114/0x120 [kvm]
  kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm]
  kvm_arch_vm_ioctl+0xa26/0xc50 [kvm]
  ? schedule+0x4e/0xc0
  ? __cond_resched+0x1a/0x50
  ? futex_wait+0x166/0x250
  ? __send_signal+0x1f1/0x3d0
  kvm_vm_ioctl+0x747/0xda0 [kvm]
  ...

The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if
mark_page_dirty() is called without an active vCPU") but the change seems
to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's
no real need to actually write to guest memory to invalidate TSC page, this
can be done by the first vCPU which goes through kvm_guest_time_update().
Reported-by: NMaxim Levitsky <mlevitsk@redhat.com>
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220407201013.963226-1-vkuznets@redhat.com>

Since current AVIC implementation cannot support encrypted memory,
inhibit AVIC for SEV-enabled guest.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220408133710.54275-1-suravee.suthikulpanit@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

+new file mode 100644
+WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
+#27: FILE: Documentation/virt/kvm/x86/errata.rst:1:

Opportunistically update all other non-added KVM documents and
remove a new extra blank line at EOF for x86/errata.rst.
Signed-off-by: NLike Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-5-likexu@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The tsc_scaling_sync's binary should be present in the .gitignore
file for the git to ignore it.
Signed-off-by: NLike Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-3-likexu@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM/riscv fixes for 5.18, take #1

- Remove hgatp zeroing in kvm_arch_vcpu_put()

- Fix alignment of the guest_hang() in KVM selftest

- Fix PTE A and D bits in KVM selftest

- Missing #include in vcpu_fp.c

vcpu_fp uses the riscv_isa_extension mechanism which gets
defined in hwcap.h but doesn't include that head file.

While it seems to work in most cases, in certain conditions
this can lead to build failures like

../arch/riscv/kvm/vcpu_fp.c: In function ‘kvm_riscv_vcpu_fp_reset’:
../arch/riscv/kvm/vcpu_fp.c:22:13: error: implicit declaration of function ‘riscv_isa_extension_available’ [-Werror=implicit-function-declaration]
   22 |         if (riscv_isa_extension_available(&isa, f) ||
      |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../arch/riscv/kvm/vcpu_fp.c:22:49: error: ‘f’ undeclared (first use in this function)
   22 |         if (riscv_isa_extension_available(&isa, f) ||

Fix this by simply including the necessary header.

Fixes: 0a86512d ("RISC-V: KVM: Factor-out FP virtualization into separate
sources")
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NAnup Patel <anup@brainfault.org>

The guest_hang() function is used as the default exception handler
for various KVM selftests applications by setting it's address in
the vstvec CSR. The vstvec CSR requires exception handler base address
to be at least 4-byte aligned so this patch fixes alignment of the
guest_hang() function.

Fixes: 3e06cdf1 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: NAnup Patel <apatel@ventanamicro.com>
Tested-by: NMayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: NAnup Patel <anup@brainfault.org>

Supporting hardware updates of PTE A and D bits is optional for any
RISC-V implementation so current software strategy is to always set
these bits in both G-stage (hypervisor) and VS-stage (guest kernel).

If PTE A and D bits are not set by software (hypervisor or guest)
then RISC-V implementations not supporting hardware updates of these
bits will cause traps even for perfectly valid PTEs.

Based on above explanation, the VS-stage page table created by various
KVM selftest applications is not correct because PTE A and D bits are
not set. This patch fixes VS-stage page table programming of PTE A and
D bits for KVM selftests.

Fixes: 3e06cdf1 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: NAnup Patel <apatel@ventanamicro.com>
Tested-by: NMayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: NAnup Patel <anup@brainfault.org>

We might have RISC-V systems (such as QEMU) where VMID is not part
of the TLB entry tag so these systems will have to flush all TLB
entries upon any change in hgatp.VMID.

Currently, we zero-out hgatp CSR in kvm_arch_vcpu_put() and we
re-program hgatp CSR in kvm_arch_vcpu_load(). For above described
systems, this will flush all TLB entries whenever VCPU exits to
user-space hence reducing performance.

This patch fixes above described performance issue by not clearing
hgatp CSR in kvm_arch_vcpu_put().

Fixes: 34bde9d8 ("RISC-V: KVM: Implement VCPU world-switch")
Cc: stable@vger.kernel.org
Signed-off-by: NAnup Patel <apatel@ventanamicro.com>
Signed-off-by: NAnup Patel <anup@brainfault.org>

Merge tag 'kvmarm-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 5.18, take #1

- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2

- Fix the MMU write-lock not being taken on THP split

- Fix mixed-width VM handling

- Fix potential UAF when debugfs registration fails

- Various selftest updates for all of the above

In order to correctly destroy a VM, all references to the VM must be
freed. The arch_timer selftest creates a VGIC for the guest, which
itself holds a reference to the VM.

Close the GIC FD when cleaning up a VM.
Signed-off-by: NOliver Upton <oupton@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-4-oupton@google.com

dirty_log_perf_test instantiates a VGICv3 for the guest (if supported by
hardware) to reduce the overhead of guest exits. However, the test does
not actually close the GIC fd when cleaning up the VM between test
iterations, meaning that the VM is never actually destroyed in the
kernel.

While this is generally a bad idea, the bug was detected from the kernel
spewing about duplicate debugfs entries as subsequent VMs happen to
reuse the same FD even though the debugfs directory is still present.

Abstract away the notion of setup/cleanup of the GIC FD from the test
by creating arch-specific helpers for test setup/cleanup. Close the GIC
FD on VM cleanup and do nothing for the other architectures.

Fixes: c340f789 ("KVM: selftests: Add vgic initialization for dirty log perf test for ARM")
Reviewed-by: NJing Zhang <jingzhangos@google.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-3-oupton@google.com

Unfortunately, there is no guarantee that KVM was able to instantiate a
debugfs directory for a particular VM. To that end, KVM shouldn't even
attempt to create new debugfs files in this case. If the specified
parent dentry is NULL, debugfs_create_file() will instantiate files at
the root of debugfs.

For arm64, it is possible to create the vgic-state file outside of a
VM directory, the file is not cleaned up when a VM is destroyed.
Nonetheless, the corresponding struct kvm is freed when the VM is
destroyed.

Nip the problem in the bud for all possible errant debugfs file
creations by initializing kvm->debugfs_dentry to -ENOENT. In so doing,
debugfs_create_file() will fail instead of creating the file in the root
directory.

Cc: stable@kernel.org
Fixes: 929f45e3 ("kvm: no need to check return value of debugfs_create functions")
Signed-off-by: NOliver Upton <oupton@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-2-oupton@google.com

When testing a kernel with commit a5905d6a ("KVM: arm64:
Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
get-reg-list output

vregs: Number blessed registers:   234
vregs: Number registers:           238

vregs: There are 1 new registers.
Consider adding them to the blessed reg list with the following lines:

	KVM_REG_ARM_FW_REG(3),

vregs: PASS
...

That output inspired two changes: 1) add the new register to the
blessed list and 2) explain why "Number registers" is actually four
larger than "Number blessed registers" (on the system used for
testing), even though only one register is being stated as new.
The reason is that some registers are host dependent and they get
filtered out when comparing with the blessed list. The system
used for the test apparently had three filtered registers.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Acked-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220316125129.392128-1-drjones@redhat.com

kvm_vcpu_release() will call kvm_dirty_ring_free(), freeing
ring->dirty_gfns and setting it to NULL.  Afterwards, it calls
kvm_arch_vcpu_destroy().

However, if closing the file descriptor races with KVM_RUN in such away
that vcpu->arch.st.preempted == 0, the following call stack leads to a
NULL pointer dereference in kvm_dirty_run_push():

 mark_page_dirty_in_slot+0x192/0x270 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3171
 kvm_steal_time_set_preempted arch/x86/kvm/x86.c:4600 [inline]
 kvm_arch_vcpu_put+0x34e/0x5b0 arch/x86/kvm/x86.c:4618
 vcpu_put+0x1b/0x70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:211
 vmx_free_vcpu+0xcb/0x130 arch/x86/kvm/vmx/vmx.c:6985
 kvm_arch_vcpu_destroy+0x76/0x290 arch/x86/kvm/x86.c:11219
 kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline]

The fix is to release the dirty page ring after kvm_arch_vcpu_destroy
has run.
Reported-by: NQiuhao Li <qiuhao@sysec.org>
Reported-by: NGaoning Pan <pgn@zju.edu.cn>
Reported-by: NYongkang Jia <kangel@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Introduce a test for aarch64 that ensures non-mixed-width vCPUs
(all 64bit vCPUs or all 32bit vcPUs) can be configured, and
mixed-width vCPUs cannot be configured.
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NReiji Watanabe <reijiw@google.com>
Reviewed-by: NOliver Upton <oupton@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220329031924.619453-3-reijiw@google.com

KVM allows userspace to configure either all EL1 32bit or 64bit vCPUs
for a guest.  At vCPU reset, vcpu_allowed_register_width() checks
if the vcpu's register width is consistent with all other vCPUs'.
Since the checking is done even against vCPUs that are not initialized
(KVM_ARM_VCPU_INIT has not been done) yet, the uninitialized vCPUs
are erroneously treated as 64bit vCPU, which causes the function to
incorrectly detect a mixed-width VM.

Introduce KVM_ARCH_FLAG_EL1_32BIT and KVM_ARCH_FLAG_REG_WIDTH_CONFIGURED
bits for kvm->arch.flags.  A value of the EL1_32BIT bit indicates that
the guest needs to be configured with all 32bit or 64bit vCPUs, and
a value of the REG_WIDTH_CONFIGURED bit indicates if a value of the
EL1_32BIT bit is valid (already set up). Values in those bits are set at
the first KVM_ARM_VCPU_INIT for the guest based on KVM_ARM_VCPU_EL1_32BIT
configuration for the vCPU.

Check vcpu's register width against those new bits at the vcpu's
KVM_ARM_VCPU_INIT (instead of against other vCPUs' register width).

Fixes: 66e94d5c ("KVM: arm64: Prevent mixed-width VM creation")
Signed-off-by: NReiji Watanabe <reijiw@google.com>
Reviewed-by: NOliver Upton <oupton@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220329031924.619453-2-reijiw@google.com

Remove unnecessary casts.
Signed-off-by: NYu Zhe <yuzhe@nfschina.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220329102059.268983-1-yuzhe@nfschina.com

It is possible to take a stage-2 permission fault on a page larger than
PAGE_SIZE. For example, when running a guest backed by 2M HugeTLB, KVM
eagerly maps at the largest possible block size. When dirty logging is
enabled on a memslot, KVM does *not* eagerly split these 2M stage-2
mappings and instead clears the write bit on the pte.

Since dirty logging is always performed at PAGE_SIZE granularity, KVM
lazily splits these 2M block mappings down to PAGE_SIZE in the stage-2
fault handler. This operation must be done under the write lock. Since
commit f783ef1c ("KVM: arm64: Add fast path to handle permission
relaxation during dirty logging"), the stage-2 fault handler
conditionally takes the read lock on permission faults with dirty
logging enabled. To that end, it is possible to split a 2M block mapping
while only holding the read lock.

The problem is demonstrated by running kvm_page_table_test with 2M
anonymous HugeTLB, which splats like so:

  WARNING: CPU: 5 PID: 15276 at arch/arm64/kvm/hyp/pgtable.c:153 stage2_map_walk_leaf+0x124/0x158

  [...]

  Call trace:
  stage2_map_walk_leaf+0x124/0x158
  stage2_map_walker+0x5c/0xf0
  __kvm_pgtable_walk+0x100/0x1d4
  __kvm_pgtable_walk+0x140/0x1d4
  __kvm_pgtable_walk+0x140/0x1d4
  kvm_pgtable_walk+0xa0/0xf8
  kvm_pgtable_stage2_map+0x15c/0x198
  user_mem_abort+0x56c/0x838
  kvm_handle_guest_abort+0x1fc/0x2a4
  handle_exit+0xa4/0x120
  kvm_arch_vcpu_ioctl_run+0x200/0x448
  kvm_vcpu_ioctl+0x588/0x664
  __arm64_sys_ioctl+0x9c/0xd4
  invoke_syscall+0x4c/0x144
  el0_svc_common+0xc4/0x190
  do_el0_svc+0x30/0x8c
  el0_svc+0x28/0xcc
  el0t_64_sync_handler+0x84/0xe4
  el0t_64_sync+0x1a4/0x1a8

Fix the issue by only acquiring the read lock if the guest faulted on a
PAGE_SIZE granule w/ dirty logging enabled. Add a WARN to catch locking
bugs in future changes.

Fixes: f783ef1c ("KVM: arm64: Add fast path to handle permission relaxation during dirty logging")
Cc: Jing Zhang <jingzhangos@google.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Reviewed-by: NReiji Watanabe <reijiw@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220401194652.950240-1-oupton@google.com

We already sanitize the guest's PSCI version when it is being written by
userspace, rejecting unsupported version numbers. Additionally, the
'minor' parameter to kvm_psci_1_x_call() is a constant known at compile
time for all callsites.

Though it is benign, the additional check against the
PSCI kvm_psci_1_x_call() is unnecessary and likely to be missed the next
time KVM raises its maximum PSCI version. Drop the check altogether and
rely on sanitization when the PSCI version is set by userspace.

No functional change intended.
Signed-off-by: NOliver Upton <oupton@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-4-oupton@google.com

The SMCCC does not allow the SMC64 calling convention to be used from
AArch32. While KVM checks to see if the calling convention is allowed in
PSCI_1_0_FN_PSCI_FEATURES, it does not actually prevent calls to
unadvertised PSCI v1.0+ functions.

Hoist the check to see if the requested function is allowed into
kvm_psci_call(), thereby preventing SMC64 calls from AArch32 for all
PSCI versions.

Fixes: d43583b8 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest")
Acked-by: NWill Deacon <will@kernel.org>
Reviewed-by: NReiji Watanabe <reijiw@google.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-3-oupton@google.com

The only valid calling SMC calling convention from an AArch32 state is
SMC32. Disallow any PSCI function that sets the SMC64 function ID bit
when called from AArch32 rather than comparing against known SMC64 PSCI
functions.

Note that without this change KVM advertises the SMC64 flavor of
SYSTEM_RESET2 to AArch32 guests.

Fixes: d43583b8 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest")
Acked-by: NWill Deacon <will@kernel.org>
Reviewed-by: NReiji Watanabe <reijiw@google.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-2-oupton@google.com

Add missing line break separator between literal block and description
of KVM_EXIT_RISCV_SBI.

This fixes:
</path/to/linux>/Documentation/virt/kvm/api.rst:6118: WARNING: Literal block ends without a blank line; unexpected unindent.

Fixes: da40d858 (RISC-V: KVM: Document RISC-V specific parts of KVM API, 2021-09-27)
Cc: Anup Patel <anup.patel@wdc.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: NBagas Sanjaya <bagasdotme@gmail.com>
Message-Id: <20220403065735.23859-1-bagasdotme@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

All work currently pending will be done first by calling destroy_workqueue,
so there is unnecessary to flush it explicitly.
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NLv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20220401083530.2407703-1-lv.ruyi@zte.com.cn>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Resolve nx_huge_pages to true/false when kvm.ko is loaded, leaving it as
-1 is technically undefined behavior when its value is read out by
param_get_bool(), as boolean values are supposed to be '0' or '1'.

Alternatively, KVM could define a custom getter for the param, but the
auto value doesn't depend on the vendor module in any way, and printing
"auto" would be unnecessarily unfriendly to the user.

In addition to fixing the undefined behavior, resolving the auto value
also fixes the scenario where the auto value resolves to N and no vendor
module is loaded.  Previously, -1 would result in Y being printed even
though KVM would ultimately disable the mitigation.

Rename the existing MMU module init/exit helpers to clarify that they're
invoked with respect to the vendor module, and add comments to document
why KVM has two separate "module init" flows.

  =========================================================================
  UBSAN: invalid-load in kernel/params.c:320:33
  load of value 255 is not a valid value for type '_Bool'
  CPU: 6 PID: 892 Comm: tail Not tainted 5.17.0-rc3+ #799
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   ubsan_epilogue+0x5/0x40
   __ubsan_handle_load_invalid_value.cold+0x43/0x48
   param_get_bool.cold+0xf/0x14
   param_attr_show+0x55/0x80
   module_attr_show+0x1c/0x30
   sysfs_kf_seq_show+0x93/0xc0
   seq_read_iter+0x11c/0x450
   new_sync_read+0x11b/0x1a0
   vfs_read+0xf0/0x190
   ksys_read+0x5f/0xe0
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae
   </TASK>
  =========================================================================

Fixes: b8e8c830 ("kvm: mmu: ITLB_MULTIHIT mitigation")
Cc: stable@vger.kernel.org
Reported-by: NBruno Goncalves <bgoncalv@redhat.com>
Reported-by: NJan Stancek <jstancek@redhat.com>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20220331221359.3912754-1-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add resched to avoid warning from sev_clflush_pages() with large number
of pages.
Signed-off-by: NPeter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Message-Id: <20220330164306.2376085-1-pgonda@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull more tracing updates from Steven Rostedt:

 - Rename the staging files to give them some meaning. Just
   stage1,stag2,etc, does not show what they are for

 - Check for NULL from allocation in bootconfig

 - Hold event mutex for dyn_event call in user events

 - Mark user events to broken (to work on the API)

 - Remove eBPF updates from user events

 - Remove user events from uapi header to keep it from being installed.

 - Move ftrace_graph_is_dead() into inline as it is called from hot
   paths and also convert it into a static branch.

* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Move user_events.h temporarily out of include/uapi
  ftrace: Make ftrace_graph_is_dead() a static branch
  tracing: Set user_events to BROKEN
  tracing/user_events: Remove eBPF interfaces
  tracing/user_events: Hold event_mutex during dyn_event_add
  proc: bootconfig: Add null pointer check
  tracing: Rename the staging files for trace_events

Pull clk fix from Stephen Boyd:
 "A single revert to fix a boot regression seen when clk_put() started
  dropping rate range requests. It's best to keep various systems
  booting so we'll kick this out and try again next time"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Revert "clk: Drop the rate range on clk_put()"

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes and updates:

   - Make the prctl() for enabling dynamic XSTATE components correct so
     it adds the newly requested feature to the permission bitmap
     instead of overwriting it. Add a selftest which validates that.

   - Unroll string MMIO for encrypted SEV guests as the hypervisor
     cannot emulate it.

   - Handle supervisor states correctly in the FPU/XSTATE code so it
     takes the feature set of the fpstate buffer into account. The
     feature sets can differ between host and guest buffers. Guest
     buffers do not contain supervisor states. So far this was not an
     issue, but with enabling PASID it needs to be handled in the buffer
     offset calculation and in the permission bitmaps.

   - Avoid a gazillion of repeated CPUID invocations in by caching the
     values early in the FPU/XSTATE code.

   - Enable CONFIG_WERROR in x86 defconfig.

   - Make the X86 defconfigs more useful by adapting them to Y2022
     reality"

* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/xstate: Consolidate size calculations
  x86/fpu/xstate: Handle supervisor states in XSTATE permissions
  x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
  x86/fpu: Cache xfeature flags from CPUID
  x86/fpu/xsave: Initialize offset/size cache early
  x86/fpu: Remove unused supervisor only offsets
  x86/fpu: Remove redundant XCOMP_BV initialization
  x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
  x86/config: Make the x86 defconfigs a bit more usable
  x86/defconfig: Enable WERROR
  selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
  x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation

Pull RT signal fix from Thomas Gleixner:
 "Revert the RT related signal changes. They need to be reworked and
  generalized"

* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"

Pull more dma-mapping updates from Christoph Hellwig:

 - fix a regression in dma remap handling vs AMD memory encryption (me)

 - finally kill off the legacy PCI DMA API (Christophe JAILLET)

* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: move pgprot_decrypted out of dma_pgprot
  PCI/doc: cleanup references to the legacy PCI DMA API
  PCI: Remove the deprecated "pci-dma-compat.h" API

Pull ARM fixes from Russell King:

 - avoid unnecessary rebuilds for library objects

 - fix return value of __setup handlers

 - fix invalid input check for "crashkernel=" kernel option

 - silence KASAN warnings in unwind_frame

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
  ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0'
  ARM: 9187/1: JIVE: fix return value of __setup handler
  ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects

This reverts commit 7dabfa2b. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reported-by: NTony Lindgren <tony@atomide.com>
Reported-by: NAlexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com
Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org

Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Avoid SEGV if core.cpus isn't set in 'perf stat'.

 - Stop depending on .git files for building PERF-VERSION-FILE, used in
   'perf --version', fixing some perf tools build scenarios.

 - Convert tracepoint.py example to python3.

 - Update UAPI header copies from the kernel sources: socket,
   mman-common, msr-index, KVM, i915 and cpufeatures.

 - Update copy of libbpf's hashmap.c.

 - Directly return instead of using local ret variable in
   evlist__create_syswide_maps(), found by coccinelle.

* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf python: Convert tracepoint.py example to python3
  perf evlist: Directly return instead of using local ret variable
  perf cpumap: More cpu map reuse by merge.
  perf cpumap: Add is_subset function
  perf evlist: Rename cpus to user_requested_cpus
  perf tools: Stop depending on .git files for building PERF-VERSION-FILE
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools kvm headers arm64: Update KVM headers from the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
  perf beauty: Update copy of linux/socket.h with the kernel sources
  perf tools: Update copy of libbpf's hashmap.c
  perf stat: Avoid SEGV if core.cpus isn't set

Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix empty $(PYTHON) expansion.

 - Fix UML, which got broken by the attempt to suppress Clang warnings.

 - Fix warning message in modpost.

* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: restore the warning message for missing symbol versions
  Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
  kbuild: Remove '-mno-global-merge'
  kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
  kconfig: remove stale comment about removed kconfig_print_symbol()

Pull MIPS fixes from Thomas Bogendoerfer:

 - build fix for gpio

 - fix crc32 build problems

 - check for failed memory allocations

* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: crypto: Fix CRC32 code
  MIPS: rb532: move GPIOD definition into C-files
  MIPS: lantiq: check the return value of kzalloc()
  mips: sgi-ip22: add a check for the return of kzalloc()

Pull kvm fixes from Paolo Bonzini:

 - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr

 - Documentation improvements

 - Prevent module exit until all VMs are freed

 - PMU Virtualization fixes

 - Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences

 - Other miscellaneous bugfixes

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  KVM: x86: fix sending PV IPI
  KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
  KVM: x86: Remove redundant vm_entry_controls_clearbit() call
  KVM: x86: cleanup enter_rmode()
  KVM: x86: SVM: fix tsc scaling when the host doesn't support it
  kvm: x86: SVM: remove unused defines
  KVM: x86: SVM: move tsc ratio definitions to svm.h
  KVM: x86: SVM: fix avic spec based definitions again
  KVM: MIPS: remove reference to trap&emulate virtualization
  KVM: x86: document limitations of MSR filtering
  KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
  KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
  KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
  KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
  KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
  KVM: x86: Trace all APICv inhibit changes and capture overall status
  KVM: x86: Add wrappers for setting/clearing APICv inhibits
  KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
  KVM: X86: Handle implicit supervisor access with SMAP
  KVM: X86: Rename variable smap to not_smap in permission_fault()
  ...