Otherwise we may miss events like PG splits, pool deletions, etc when
we get multiple incremental maps at once.  Because check_pool_dne() can
now be fed an unlinked request, finish_request() needed to be taught to
handle unlinked requests.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

When processing a map update consisting of multiple incrementals, we
may end up running check_linger_pool_dne() on a lingering request that
was previously added to need_resend_linger list.  If it is concluded
that the target pool doesn't exist, the request is killed off while
still on need_resend_linger list, which leads to a crash on a NULL
lreq->osd in kick_requests():

    libceph: linger_id 18446462598732840961 pool does not exist
    BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
    IP: ceph_osdc_handle_map+0x4ae/0x870
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Note that ceph_osd_request_target fields are updated regardless of
RESEND_ON_SPLIT.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Replace it with more fine-grained bools to separate updating
ceph_osd_request_target fields and the decision to resend.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Factor out encode_{pgid,oloc}() and use ceph_encode_string() for oid.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Store both raw pgid and actual spgid in ceph_osd_request_target.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

CURRENT_TIME is not y2038 safe.  The macro will be deleted and all the
references to it will be replaced by ktime_get_* apis.

struct timespec is also not y2038 safe.  Retain timespec for timestamp
representation here as ceph uses it internally everywhere.  These
references will be changed to use struct timespec64 in a separate patch.

The current_fs_time() api is being changed to use vfs struct inode* as
an argument instead of struct super_block*.

Set the new mds client request r_stamp field using ktime_get_real_ts()
instead of using current_fs_time().

Also, since r_stamp is used as mtime on the server, use timespec_trunc()
to truncate the timestamp, using the right granularity from the
superblock.

This api will be transitioned to be y2038 safe along with vfs.

Link: http://lkml.kernel.org/r/1491613030-11599-5-git-send-email-deepa.kernel@gmail.comSigned-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
M:	Ilya Dryomov <idryomov@gmail.com>
M:	"Yan, Zheng" <zyan@redhat.com>
M:	Sage Weil <sage@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cephfs can get cap update requests that contain a new epoch barrier in
them. When that happens we want to pause all OSD traffic until the right
map epoch arrives.

Add an epoch_barrier field to ceph_osd_client that is protected by the
osdc->lock rwsem. When the barrier is set, and the current OSD map
epoch is below that, pause the request target when submitting the
request or when revisiting it. Add a way for upper layers (cephfs)
to update the epoch_barrier as well.

If we get a new map, compare the new epoch against the barrier before
kicking requests and request another map if the map epoch is still lower
than the one we want.

If we get a map with a full pool, or at quota condition, then set the
barrier to the current epoch value.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

When a Ceph volume hits capacity, a flag is set in the OSD map to
indicate that, and a new map is sprayed around the cluster. With cephfs
we want it to shut down any abortable requests that are in progress with
an -ENOSPC error as they'd just hang otherwise.

Add a new ceph_osdc_abort_on_full helper function to handle this. It
will first check whether there is an out-of-space condition in the
cluster and then walk the tree and abort any request that has
r_abort_on_full set with a -ENOSPC error. Call this new function
directly whenever we get a new OSD map.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Usually, when the osd map is flagged as full or the pool is at quota,
write requests just hang. This is not what we want for cephfs, where
it would be better to simply report -ENOSPC back to userland instead
of stalling.

If the caller knows that it will want an immediate error return instead
of blocking on a full or at-quota error condition then allow it to set a
flag to request that behavior.

Set that flag in ceph_osdc_new_request (since ceph.ko is the only caller),
and on any other write request from ceph.ko.

A later patch will deal with requests that were submitted before the new
map showing the full condition came in.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Nothing uses this anymore with the removal of the ack vs. commit code.
Remove the field and just encode zeroes into place in the request
encoding.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

osd_request_timeout specifies how many seconds to wait for a response
from OSDs before returning -ETIMEDOUT from an OSD request.  0 (default)
means no limit.

osd_request_timeout is osdkeepalive-precise -- in-flight requests are
swept through every osdkeepalive seconds.  With ack vs commit behaviour
gone, abort_request() is really simple.

This is based on a patch from Artur Molchanov <artur.molchanov@synesis.ru>.
Tested-by: NArtur Molchanov <artur.molchanov@synesis.ru>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

CEPH_OSD_FLAG_ONDISK is set in account_request().
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

- CEPH_OSD_FLAG_ACK shouldn't be set anymore, so assert on it
- remove support for handling ack replies (OSDs will send ack replies
  only if clients request them)
- drop the "do lingering callbacks under osd->lock" logic from
  handle_reply() -- lreq->lock is sufficient in all three cases
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

To spare checking for "this reply fits into a page, but does it fit
into my buffer?" in some callers, osd_req_op_cls_response_data_pages()
needs to know how big it is.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

add_to_page_cache_lru() can fails, so the actual pages to read
can be smaller than the initial size of osd request. We need to
update osd request size in that case.
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

Since we need to change the implementation, stop exposing internals.

Provide kref_read() to read the current reference count; typically
used for debug messages.

Kills two anti-patterns:

	atomic_read(&kref->refcount)
	kref->refcount.counter
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Kill the wrapper and rename __finish_request() to finish_request().
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

r_safe_completion is currently, and has always been, signaled only if
on-disk ack was requested.  It's there for fsync and syncfs, which wait
for in-flight writes to flush - all data write requests set ONDISK.

However, the pool perm check code introduced in 4.2 sends a write
request with only ACK set.  An unfortunately timed syncfs can then hang
forever: r_safe_completion won't be signaled because only an unsafe
reply was requested.

We could patch ceph_osdc_sync() to skip !ONDISK write requests, but
that is somewhat incomplete and yet another special case.  Instead,
rename this completion to r_done_completion and always signal it when
the OSD client is done with the request, whether unsafe, safe, or
error.  This is a bit cleaner and helps with the cancellation code.
Reported-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

The length of the reply is protocol-dependent - for cephx it's
ceph_x_authorize_reply.  Nothing sensible can be passed from the
messenger layer anyway.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

osdc->last_linger_id is a counter for lreq->linger_id, which is used
for watch cookies.  Starting with a large integer should ease the task
of telling apart kernel and userspace clients.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Revamp watch code to support retrying watch re-registration:

- add rbd_dev->watch_state for more robust errcb handling
- store watch cookie separately to avoid dereferencing watch_handle
  which is set to NULL on unwatch
- move re-register code into a delayed work and retry re-registration
  every second, unless the client is blacklisted
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Tested-by: NMike Christie <mchristi@redhat.com>

Add a convenience function to osd_client to send Ceph OSD
'class' ops. The interface assumes that the request and
reply data each consist of single pages.
Signed-off-by: NDouglas Fuller <dfuller@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Add support for this Ceph OSD op, needed to support the RBD exclusive
lock feature.
Signed-off-by: NDouglas Fuller <dfuller@redhat.com>
[idryomov@gmail.com: refactor, misc fixes throughout]
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

In case of error, the function ceph_alloc_page_vector() returns
ERR_PTR() and never returns NULL. The NULL test in the return value
check should be replaced with IS_ERR().

Fixes: 19079203 ('libceph: support for sending notifies')
Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Add pool namesapce pointer to struct ceph_file_layout and struct
ceph_object_locator. Pool namespace is used by when mapping object
to PG, it's also used when composing OSD request.

The namespace pointer in struct ceph_file_layout is RCU protected.
So libceph can read namespace without taking lock.
Signed-off-by: NYan, Zheng <zyan@redhat.com>
[idryomov@gmail.com: ceph_oloc_destroy(), misc minor changes]
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Define new ceph_file_layout structure and rename old ceph_file_layout
to ceph_file_layout_legacy. This is preparation for adding namespace
to ceph_file_layout structure.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Commit d30291b9 ("libceph: variable-sized ceph_object_id") changed
dout()s in what is now encode_request() and ceph_object_locator_to_pg()
to use %pE, mostly to document that, although all rbd and cephfs object
names are NULL-terminated strings, ceph_object_id will handle any RADOS
object name, including the one containing NULs, just fine.

However, it turns out that vbin_printf() can't handle anything but ints
and %s - all %p suffixes are ignored.  The buffer %p** points to isn't
recorded, resulting in trash in the messages if the buffer had been
reused by the time bstr_printf() got to it.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

handle_reply() may be called twice on the same request: on ack and then
on commit.  This occurs on btrfs-formatted OSDs or if cephfs sync write
path is triggered - CEPH_OSD_FLAG_ACK | CEPH_OSD_FLAG_ONDISK.

handle_reply() handles this with the help of done_request().

Fixes: 5aea3dcd ("libceph: a major OSD client update")
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

For the benefit of every single caller, take osdc instead of map.
Also, now that osdc->osdmap can't ever be NULL, drop the check.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Ceph_osdc_wait_request() is used when cephfs issues sync IO. In most
cases, the sync IO should be uninterruptible. The fix is use killale
wait function in ceph_osdc_wait_request().
Signed-off-by: NYan, Zheng <zyan@redhat.com>

... with a wrapper around maybe_request_map() - no need for two
osdmap-specific functions.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This adds the "map check" infrastructure for sending osdmap version
checks on CALC_TARGET_POOL_DNE and completing in-flight requests with
-ENOENT if the target pool doesn't exist or has just been deleted.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Implement ceph_osdc_watch_check() to be able to check on status of
watch.  Note that the time it takes for a watch/notify event to get
delivered through the notify_wq is taken into account.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Implement ceph_osdc_notify() for sending notifies.

Due to the fact that the current messenger can't do read-in into
pagelists (it can only do write-out from them), I had to go with a page
vector for a NOTIFY_COMPLETE payload, for now.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This adds support and switches rbd to a new, more reliable version of
watch/notify protocol.  As with the OSD client update, this is mostly
about getting the right structures linked into the right places so that
reconnects are properly sent when needed.  watch/notify v2 also
requires sending regular pings to the OSDs - send_linger_ping().

A major change from the old watch/notify implementation is the
introduction of ceph_osd_linger_request - linger requests no longer
piggy back on ceph_osd_request.  ceph_osd_event has been merged into
ceph_osd_linger_request.

All the details are now hidden within libceph, the interface consists
of a simple pair of watch/unwatch functions and ceph_osdc_notify_ack().
ceph_osdc_watch() does return ceph_osd_linger_request, but only to keep
the lifetime management simple.

ceph_osdc_notify_ack() accepts an optional data payload, which is
relayed back to the notifier.

Portions of this patch are loosely based on work by Douglas Fuller
<dfuller@redhat.com> and Mike Christie <michaelc@cs.wisc.edu>.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>