- 30 6月, 2008 9 次提交
-
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Éric Piel 提交于
If the subsystem is not present, instead of not doing anything, report the key press as a normal key. This is done by modifying at initialization the copied key entry table. Signed-off-by: NEric Piel <Eric.Piel@tremplin-utc.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jiri Kosina 提交于
Video switch key on HP 2133 doesn't send release event, so we have to create workaround similar to what we do for Dell Latitude, i.e. perform DMI match for the system and generate 'false' release event ourselves, so that userspace doesn't think that the key is stuck forever. Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Richard Lemon 提交于
Signed-off-by: NRichard Lemon <richard@codelemon.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Mark Brown 提交于
The hardware does not support pressure measurement is 5-wire mode so warn the user if he tries to request it. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Adam Dawidowski 提交于
Force feedback upload of effects through the event device (ioctl EVIOCSFF) is not working in 32 bit applications running on 64-bit kernel due to the fact that struct ff_effect contains a pointer, resulting in the structure having different sizes in 64 and 32 bit programs and causing difference in ioctl numbers. [dtor@mail.ru: refactor to keep all ugliness in evdev] Signed-off-by: NAdam Dawidowski <drake_ster@wp.pl> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
This should help with devices that don't set up their phys or name since sysfs ID is always present. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 18 6月, 2008 1 次提交
-
-
由 Dmitry Torokhov 提交于
Conflicts: drivers/input/mouse/appletouch.c
-
- 17 6月, 2008 2 次提交
-
-
由 Oliver Neukum 提交于
On some boxes the touchpad needs to be reinitialized after resume to make it function again. This fixes bugzilla #10825. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jiri Kosina 提交于
There are systems that fail in i8042_resume() with i8042: Can't write CTR to resume as i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR) fails even though the controller claimed itself to be ready before. One retry after failing write fixes the problems on the failing systems. Reported-by: NHelmut Schaa <hschaa@novell.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 06 6月, 2008 2 次提交
-
-
由 Jiri Kosina 提交于
Fujitsu Siemens Amilo Pro V2030 needs nomux table entry, in addition to already existing entry for V2010 model (note that Fujitsu-Siemens changed the capitalization in the DMI data for product). Tested-by: NJiri Mleziva <jmleziva@tiscali.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Stas Sergeev 提交于
It should be possible to build pcspkr driver together with snd-pcsp, even though tehy can not be used together. Signed-off-by: NStas Sergeev <stsp@aknet.ru> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 02 6月, 2008 4 次提交
-
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.miao@marvell.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
That fixes an opps when driver is repeatedly loaded and unloaded in a tight loop. Tested-by: NRoland Kletzing <devzero@web.de> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Since some of the keycodes defined in input.h have values greater than 255 we should use unsigned shorts in keymaps. Tested-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Pau Oliva Fora 提交于
Signed-off-by: NPau Oliva Fora <pau@eslack.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 30 5月, 2008 3 次提交
-
-
The SW_RADIO code for EV_SW events has a name that is not descriptive enough of its intended function, and could induce someone to think KEY_RADIO is its EV_KEY counterpart, which is false. Rename it to SW_RFKILL_ALL, and document what this event is for. Keep the old name around, to avoid userspace ABI breaks. The SW_RFKILL_ALL event is meant to be used by rfkill master switches. It is not bound to a particular radio switch type, and usually applies to all types. It is semantically tied to master rfkill switches that enable or disable every radio in a system. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
The code would try to free 'report' twice upon input_register_device() failure. Reported-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jiri Kosina 提交于
This patch introduces i8042_dmi_nopnp_table to make it possible to perform DMI matches for systems that need 'i8042.nopnp' to work correctly, and introduces such an entry for Intel D845PESV -- this system doesn't detect PS2 mouse reliably without this option, as reported by Robert Lewis. [dtor@mail.ru - make it compile if CONFIG_PNP is off - reported by Randy Dunlap] Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 29 5月, 2008 1 次提交
-
-
由 Antonio Ospite 提交于
1. Set input bits for direct keys codes 2. Set input bits for rotary encoder codes only if rotary encoder is enabled 3. Enable EV_REL only if rotary encoder is enabled and rel_codes are set up Signed-off-by: NAntonio Ospite <ao2@openezx.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 28 5月, 2008 1 次提交
-
-
由 Dmitry Torokhov 提交于
This will shut off garbage that may come from KBD port during resume. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 27 5月, 2008 6 次提交
-
-
由 Huang Weiyi 提交于
Remove duplicate include file <linux/module.h>. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Mark Brown 提交于
The chip phy_init() function must be called before the dig_enable() function but dig_enable() is called when the device is opened and we only call phy_init() after having reigstered the device, meaning the two can race. Fix this by doing the phy_init() before we register the input device. Thanks to Rodolfo Giometti <giometti@enneenne.com> for the report. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Mark Brown 提交于
Fix driver name - thanks to Guennadi Liakhovetski <g.liakhovetski@gmx.de> for reporting this. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Mark Brown 提交于
phys is displayed in diagnostic output like that from evbug so ensure that it is set to something. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Bruno Prémont 提交于
Also do not fail i8042 entire initialization if enabling dritek extension fails. Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 5月, 2008 2 次提交
-
-
由 Bruno Prémont 提交于
The Acer TravelMate 660 series also requires the Dritek quirk to enable the extra scancodes. Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Adrian Bunk 提交于
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 17 5月, 2008 9 次提交
-
-
由 Dmitry Baryshkov 提交于
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Magnus Damm 提交于
This is V2 of the MigoR touch screen driver. The chip we interface to is unfortunately a custom designed microcontroller speaking some undocumented protocol over i2c. The board specific code is expected to register this device as an i2c chip using struct i2c_board_info [] and i2c_register_board_info(). [dtor@mail.ru: don't enable touchscreen if there are no users] Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Joe Perches 提交于
Remove unused to_dev, to_handler, to_handle from include/linux/input.h Move to_handle_h from include/linux/input.h to drivers/char/keyboard.c Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Delayed command execution is not used by anyone so let's remove it. Reported-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
They have never been used and are unlikely to be used in the future so remove them altogether. Reported-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Andres Salomon 提交于
[dtor@mail.ru: also signal correct return value to callers] Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Sven Anders 提交于
This patch simplifies type detection and removes unnecessary code. Signed-off-by: NSven Anders <anders@anduras.de> [jberg: don't typedef, checkpatch clean, remove useless comments, ...] Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Johannes Berg 提交于
This patch does some code cleanups in appletouch: * useless comment removal * make almost checkpatch clean * make sparse clean Signed-off-by: NSven Anders <anders@anduras.de> [jberg: most of the changes including removing much of the original patch] Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Rodney Lorrimar 提交于
If the adbhid module parameter restore_capslock_events is used, pressing the power button may confuse the capslock state. This is because the power button release scancode (0xff) is sometimes the same as the capslock press/release scancode. This fix adds yet another flag to track the state of the power button so that it works independently of capslock. Signed-off-by: NRodney Lorrimar <rodney@rodney.id.au> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-