Signed-off-by: NLei Xu <B33228@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

FSL PCIe controller can act as agent(EP) or host(RC).  Under Agent(EP) mode
the controller will be configured by the host system.  So its not required
to be registered with the PCI(e) sub-system. We only register the
controller if its configured in host(RC) mode.
Signed-off-by: NVivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add support for the ePAPR-compliant Freescale hypervisor (aka "Topaz") on
the Freescale P3041DS, P4080DS, and P5020DS reference boards.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add functions to restart and halt the current partition when running under
the Freescale hypervisor.  These functions should be assigned to various
function pointers of the ppc_md structure during the .probe() function for
the board:

	ppc_md.restart = fsl_hv_restart;
	ppc_md.power_off = fsl_hv_halt;
	ppc_md.halt = fsl_hv_halt;
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The Freescale ePAPR reference hypervisor provides interrupt controller
services via a hypercall interface, instead of emulating the MPIC
controller.  This is called the VMPIC.

The ePAPR "virtual interrupt controller" provides interrupt controller
services for external interrupts.  External interrupts received by a
partition can come from two sources:

  - Hardware interrupts - hardware interrupts come from external
    interrupt lines or on-chip I/O devices.
  - Virtual interrupts - virtual interrupts are generated by the hypervisor
    as part of some hypervisor service or hypervisor-created virtual device.

Both types of interrupts are processed using the same programming model and
same set of hypercalls.
Signed-off-by: NAshish Kalra <ashish.kalra@freescale.com>
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

ePAPR hypervisors provide operating system services via a "hypercall"
interface.  The following steps need to be performed to make an hcall:

1. Load r11 with the hcall number
2. Load specific other registers with parameters
3. Issue instrucion "sc 1"
4. The return code is in r3
5. Other returned parameters are in other registers.

To provide this service to the kernel, these steps are wrapped in inline
assembly functions.  Standard ePAPR hcalls are in epapr_hcalls.h, and
Freescale extensions are in fsl_hcalls.h.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Move irq_choose_cpu() into arch/powerpc/kernel/irq.c so that it can be used
by other PIC drivers.  The function is not MPIC-specific.
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Only 32-bit SoCs have a QUICC Engine so limit the config option to PPC32.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

We need the FSL specific header fixup code on both 32-bit and 64-bit
platforms so just move the code into pci-common.c.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The P1023 processor is an e500v2 based SoC that utilizes the DPAA
networking architecture.  This adds basic board support for non-DPAA
functionality (device tree, board file, etc).
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

We expect this is actually faster, and we end up needing more space than we
can get from the SPRGs in some instances.  This is also useful when running
as a guest OS - SPRGs4-7 do not have guest versions.

8 slots are allocated in thread_info for this even though we only actually
use 4 of them - this allows space for future code to have more scratch
space (and we know we'll need it for things like hugetlb).
Signed-off-by: NAshish Kalra <Ashish.Kalra@freescale.com>
Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

In cases like when the platform is used under hypervisor we will NOT
have an MPIC controller but still want doorbells setup.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

We fixup every FSL PCIe Root Complex we need to fixup a few things.
Rather than adding every device under the sun we move to just matching
only on the vendor (PCI_VENDOR_ID_FREESCALE) and than check that we are
a PCIe controller in host mode in the fixup.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Several changes on PCIe support on P3041DS/P4080DS/P5020DS boards:
* Add support for "fsl,qoriq-pcie-v2.2" needed by P3041 & P5020
* Removed support for setting primary_phb_addr as we have no ISA need
* Add PCI controller to of_platform_bus_probe (for EDAC)
* Cleanup building w/SWIOTLB off on P4080DS (not stricly PCIe related)
Signed-off-by: NKai.Jiang <Kai.Jiang@freescale.com>
Signed-off-by: NLaurentiu TUDOR <Laurentiu.Tudor@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* Added BSD dual-license
* Moved mpic-parent to root so we dont need to duplicate everywhere
* Added next level cache from L2 to CPC
* Moved to 4-cell MPIC interrupt properties
* Added 3 MSI banks
* Added numerous missing nodes: soc-sram-error, guts, pins, clockgen,
  rcpm, sfp, serdes, etc.
* Reworked PCIe interrupts to be at virtual bridge level
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add basic device tree for P3041DS board.  This device tree excludes
support for DPAA and RapidIO nodes.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add basic device tree for P5020DS board.  This device tree excludes
support for DPAA and RapidIO nodes.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The e500mc and e5500 based cores are only available on corenet based
SoCs.  We use this name for the P204x, P3040, P4040, P4080, P50x0 SoCs
and any future processors in these families.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Rather than trying to use the core name we use corenet to distinquish
the platform/core combo.  corenet64 will be a 64-bit kernel build and
we'll add a new defconfig for corenet32 for a 32-bit platforms.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

doorbell type is defined as bits 32:36 so should be shifted by 63-36 =
27 rather than 28.

We never noticed this bug as we've only every used type PPC_DBELL = 0.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Back in 2006 the "udbg-immortal" kernel option has been introduced:

  > commit 3b5e905e
  > Author: Benjamin Herrenschmidt <benh@au1.ibm.com>
  > Date:   Wed Jun 7 12:06:20 2006 +1000
  >
  >  [PATCH] powerpc: Add udbg-immortal kernel option

...but I could not find it documented anywhere in the sources.
This patch adds it to Documentation/kernel-parameters.txt.
Signed-off-by: NChristian Kujau <lists@nerdbynature.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Support compilation of mpic.c with DEBUG defined, as now we have irq_desc and
not irq number.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On many platforms (including pSeries), smp_ops->message_pass is always
smp_muxed_ipi_message_pass.  This changes arch/powerpc/kernel/smp.c so
that if smp_ops->message_pass is NULL, it calls smp_muxed_ipi_message_pass
directly.

This means that a platform doesn't need to set both .message_pass and
.cause_ipi, only one of them.  It is a slight performance improvement
in that it gets rid of an indirect function call at the expense of a
predictable conditional branch.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

smp_release_cpus() waits for all cpus (including the bootcpu) due to an
off-by-one count on boot_cpu_count (which is all CPUs).  This patch replaces
that with spinning_secondaries (which is all secondary CPUs).
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Before if we didn't support or enable HW table walk we'd get a messaage
like:

MMU: Book3E Page Tables Disabled

Which is a bit misleading.  Now it will say:

MMU: Book3E HW tablewalk not supported
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Runtime: Fix loops in pm_runtime_clk_notify()
  PM / Intel IOMMU: Fix init_iommu_pm_ops() for CONFIG_PM unset

This tries to make the 'struct inode' accesses denser in the data cache
by moving a commonly accessed field (i_security) closer to other fields
that are accessed often.

It also makes 'i_state' just an 'unsigned int' rather than 'unsigned
long', since we only use a few bits of that field, and moves it next to
the existing 'i_flags' so that we potentially get better structure
layout (although depending on config options, i_flags may already have
packed in the same word as i_lock, so this improves packing only for the
case of spinlock debugging)

Out 'struct inode' is still way too big, and we should probably move
some other fields around too (the acl fields in particular) for better
data cache access density.  Other fields (like the inode hash) are
likely to be entirely irrelevant under most loads.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a rather hot function that is called with a potentially NULL
"struct common_audit_data" pointer argument.  And in that case it has to
provide and initialize its own dummy common_audit_data structure.

However, all the _common_ cases already pass it a real audit-data
structure, so that uncommon NULL case not only creates a silly run-time
test, more importantly it causes that function to have a big stack frame
for the dummy variable that isn't even used in the common case!

So get rid of that stupid run-time behavior, and make the (few)
functions that currently call with a NULL pointer just call a new helper
function instead (naturally called inode_has_perm_noapd(), since it has
no adp argument).

This makes the run-time test be a static code generation issue instead,
and allows for a much denser stack since none of the common callers need
the dummy structure.  And a denser stack not only means less stack space
usage, it means better cache behavior.  So we have a win-win-win from
this simplification: less code executed, smaller stack footprint, and
better cache behavior.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (28 commits)
  MAINTAINERS: add a maintainer to Gadget Framework
  USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driver
  Revert "USB: option: add ID for ZTE MF 330"
  drivers/usb/host/ohci-pxa27x.c: add missing clk_put
  USB: CONFIG_USB_GADGET_DUALSPEED is not user-configurable
  USB: dummy-hcd needs the has_tt flag
  usb-storage: redo incorrect reads
  usb/renesas_usbhs: free uep on removal
  usb/s3c-hsudc: fix error path
  usb/pxa25x_udc: cleanup the LUBBOCK err path
  usb/mv_udc_core: fix compile
  usb: gadget: include <linux/prefetch.h> to fix compiling error
  USB: s3c-hsotg: Tone down debugging
  usb: remove bad dput after dentry_unhash
  USB: core: Tolerate protocol stall during hub and port status read
  musb: fix prefetch build failure
  USB: cdc-acm: Adding second ACM channel support for Nokia E7 and C7
  usb-gadget: unlock data->lock mutex on error path in ep_write()
  USB: option Add blacklist for ZTE K3765-Z (19d2:2002)
  option: add Prolink PH300 modem IDs
  ...

I'll be continuing the amazing work Dave has
done with the Gadget Framework.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  spi/rtc-m41t93: Use spi_get_drvdata() for SPI devices
  spi/omap2: fix uninitialized variable

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: trivial: add space in fsc error message
  cifs: silence printk when establishing first session on socket
  CIFS ACL support needs CONFIG_KEYS, so depend on it
  possible memory corruption in cifs_parse_mount_options()
  cifs: make CIFS depend on CRYPTO_ECB
  cifs: fix the kernel release version in the default security warning message

This is needed to get the following MAINTAINERS patch to apply properly.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2.
Signed-off-by: NSteffen Sledz <sledz@dresearch-fe.de>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

One new offender detected by the recently increased type checking in
platform_get_drvdata():

drivers/rtc/rtc-m41t93.c: In function ‘m41t93_remove’:
drivers/rtc/rtc-m41t93.c:192: warning: passing argument 1 of ‘platform_get_drvdata’ from incompatible pointer type

Use spi_get_drvdata() instead of platform_get_drvdata(), cfr. commit
42fea15d ("spi/rtc-{ds1390,ds3234,m41t94}:
Use spi_get_drvdata() for SPI devices")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: off by one errors in multicalls.c
  xen: use the trigger info we already have to choose the irq handler

Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix comments in include/linux/perf_event.h
  perf: Comment /proc/sys/kernel/perf_event_paranoid to be part of user ABI
  perf python: Fix argument name list of read_on_cpu()
  perf evlist: Don't die if sample_{id_all|type} is invalid
  perf python: Use exception to propagate errors
  perf evlist: Remove dependency on debug routines
  perf, cgroups: Fix up for new API

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio/samsung: make Kconfig options def_bool
  gpio/exynos4: Fix incorrect mapping of gpio pull-up macro to register setting
  GPIO: OMAP: add locking around calls to _set_gpio_triggering
  GPIO: OMAP: fix setting IRQWAKEN bits for OMAP4
  GPIO: OMAP: fix section mismatch warnings
  gpio: Fix gpio-exynos4 build fails in mainline